Used Reduce for sale (2,438)

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 82740 € 1563.79 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm 11 140 M 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm 1700 mm 1730 mm 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake Nledpfx Aaewiq Rxsnsk longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 68 870,00 turning length2.000 mm € 71 780,00 turning length4.000 mm € 88 640,00 turning length5.000 mm € 101 200,00 turning length6.000 mm € 114 800,00

Condition: new, Year of construction: 2025, DPF MASTER FLASH STANDARD ™ is a compact device for regenerating diesel particulate filters (DPFs) using a hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and a built-in filtration system. The cleaning process operates in an automatic cycle, restoring 99% of the filter's factory parameters. The device comes with adapters that enable the connection of all DPF filters from passenger cars. To enhance the efficiency of the regeneration process, we recommend purchasing the dedicated DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: - Weight: 200 kg - External chamber dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Operating pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Fluid temperature adjustable between 30°C and 100°C - Pump capacity: up to 133 L/min - Fluid filtration: 5 - 100 microns Nlsdsgllxgspfx Aanok - Safety features: temperature sensor, fluid level sensor, emergency safety switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature regulator - Programmable controller for automatic cycle operation - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0-8 bar) - Built-in filtration system - Adapters for DPF filters With the purchase of our machine, you will receive a starter kit to help you start operating at full capacity. The kit includes: - A set of 3 filter cartridges + 3 replacements - XPOWER DPF Cleaner chemical package (2 x 1 L)

Condition: used, Year of construction: 2010, Technical Specifications & Performance Data This Pentablock Filling Monoblock combines rinsing, filling, corking, and wire-hooding in a single compact rotary frame for glass bottle handling. Manufactured by Mondial, the LD 16-16-3E/PK-1RF-1V configuration delivers robust mechanical design with precise bottle control across the rinsing, filling, capping, and wire-hooding turrets. It is suitable for second hand installations and integration into a used bottling line focused on beverage production and industrial packaging. Model: LD 16-16-3E/PK-1RF-1V Bottle materials: Glass Bottle formats: Compatible with 0.33L and 0.75L bottle formats Rinser turret: 16 grippers (rotary) Filler turret: 16 valves, gravity/light depression technology Closures supported: Crown cap, champagne-style mushroom cork Wire hooding: Integrated wire-hood applicator for champagne-style closures HMI: Siemens OP73 Micro Typical applications: Wine, sparkling wine, and specialty beverages in glass Advanced Automation & Control Systems The monoblock features an integrated automation architecture with a user-friendly HMI for setup, format recipes, and diagnostics. Line operators benefit from clear alarm messaging and guided procedures that reduce downtime and facilitate changeovers between formats and closure types. The control system supports coordinated motion across turrets to maintain stable product handling and consistent fill accuracy. Siemens OP73 Micro HMI for monitoring and control Programmable format parameters for different bottle sizes Interlocked guards and safety logic for operator protection Quick adjustments for height and starwheel changeovers Production Line Integration Capabilities Engineered to operate as a standalone monoblock or integrated within a complete used bottling line, this machine accepts infeed conveyors and outfeed conveyors for seamless connection to upstream and downstream equipment such as labelers, inspectors, and packers. Its rotary architecture accommodates format parts for multiple glass bottle sizes and closure types while maintaining consistent throughput and gentle handling. Inline integration with standard conveyor systems Multi-format capability: 0.33L and 0.75L glass bottles Closure flexibility: crown cap and champagne-style cork with wire-hood Suitable for production environments of refermented beer and classically prepared sparkling wine Machine Condition & Maintenance History The machine is presented as ready for operation with a commercial focus on reliable second hand bottling equipment. Standard preventive maintenance points are accessible, with clear procedures for scheduled inspections and sanitation to maintain consistent quality. Operational status: ready for operation Nodox Ivq Ijpfx Aanjlk Routine access for inspection and cleaning Supports sanitization of product-contact parts Operational Performance & Versatility This monoblock is designed for glass beverage applications requiring high-quality rinsing, accurate gravity/light depression filling, robust closure application, and secure wire-hooding for champagne-style finishes.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 916 mm, total length: 852 mm, total height: 593 mm, type of input current: AC, input voltage: 220 V, tool diameter: 350 mm, travel distance X-axis: 400 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, For sale is a Speronis brand presetting device of the type STP Magis 400 The device is in very good condition, fully functional and ready for immediate use Technical data: Year of manufacture: 2013 Z-axis: 400 mm X-axis: 400 mm Max Ø: 350 mm Connection: 220 V Compressed air: 5-7 Mpa System weight (machine only): approx. 200 kg Dimensions: 916*852*593 mm Additional reducing sleeves are not included in the offer Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Nlodpfxevtcu Ss Aanjk Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER including case Nlsdpfxjx I N Imo Aanek We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Condition: excellent (used), Year of construction: 2002, We offer a biomass boiler from the renowned company Urbas – a top-of-the-line product for burning moist biomass. Manufacturer: URBAS Austria Type: UR-FRR Output: 5 MW, Type-certified from 3.5 MW Year of manufacture: 2002 Water temperature: 110 °C Operating pressure: 6 bar Boiler type-certified due to legal requirements and the absence of an electrostatic precipitator. Electrostatic precipitator reduced from 3.5 MW Fuel: Wood chips, bark, sawdust, Granulation: G 100, Maximum humidity: 60% The offer includes: Electrical barrier set, complete labeled wiring Pumps and valves set, sensors and probes, thermometers, piping, a multicyclone (smoke pre-filter), hydraulic ash removal from the boiler, hydraulically driven grates, and a hydraulic airlock under the firebox. The hydraulic fuel supply with hydraulic pump, approximately 6 meters long, is equipped with an automatic fire extinguishing system in case of flame flashback. Nedpfexwnxyox Aanolk Lambda probe in the flue pipe. Approximately 12 m horizontal flue pipe. Set of recirculation fans, a flue gas fan controlled by a furnace vacuum sensor and temperature. Circulation pump, three-way valve, and shut-off valves. Complete documentation of the electrical installation and program description. Optional at extra cost: 1. Push-through floor from the fuel storage area, 2 racks, floor dimensions 3.8 m x 10 m, including hydraulic pump and complete hydraulic hose set. 2. Insulated, double-walled stainless steel chimney, 500 mm inner diameter, approximately 15 m high. 3. Complete dismantling Including opening and closing the roof, crane operation, loading, and photographic documentation of the dismantling. Price to be discussed. Or joint dismantling with ATS Maszyny and the buyer's fitters. Price to be discussed Dismantling date: from April 6, 2026

Condition: new, neu Bulgarien 115600 € 2184.84 € 1090 mm 3000 mm 500 mm Nsdjwiqv Uepfx Aanolk 155 mm 690 mm 700 mm 15 160 M 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning length5.000 mm € 134 700,00 turning length6.000 mm € 151 230,00

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme Nledpfx Aswugczoanok 27. Display languages: IT/EN/SK

Condition: used, Year of construction: 2004, operating hours: 41,000 h, Used Filling Monoblock Labeler Polaris for Olive Oil – 1400 BPH If you are looking for a reliable and optimized solution for olive oil production, the Polaris Filling and Labeling Monoblock is an excellent investment. Designed for a speed of approximately 1400 bottles per hour (BPH), this machine is ideal for small and medium-sized businesses looking to increase production efficiency without compromising quality. As a used machine, it also helps reduce acquisition costs while maintaining high performance thanks to its robust structure and reliable technology. 1. Main Features The core of this bottling solution lies in the combination of filling and labeling functions within a single production line. Here are some key highlights: Monoblock structure: filling and labeling integrated into one unit. 1400 BPH capacity: perfect for medium-sized businesses. Olive oil compatibility: designed to handle liquids with similar density to edible oil. Ergonomic design: easy access to components for maintenance and cleaning. Simple integration: can be easily added to an existing bottling line. These features ensure maximum operational efficiency and streamline the production process while preserving the quality of the olive oil and delivering a professional finish to each bottle. 2. Benefits of This Hybrid Filling and Labeling Solution Adopting a filling and labeling monoblock can provide significant advantages for those looking to develop or upgrade their olive oil production system: Lower operational costs: a single machine simplifies the production layout and reduces maintenance expenses. Space optimization: thanks to its compact design, the installation area is minimized. Improved quality control: fewer transitions between filling and labeling mean fewer errors and less waste. Flexibility: the machine can be adjusted to accommodate different bottle sizes and label types. With these advantages, the Polaris Monoblock (M278) is particularly suitable for businesses looking to enhance productivity while maintaining high-quality standards. Its speed of approximately 1400 BPH ensures a rapid response to market demands. 3. Maximizing Production Efficiency Olive oil requires specific care to preserve its organoleptic and nutritional properties. This filling and labeling monoblock is designed with these aspects in mind, featuring high-quality components that work together to ensure the delicate nature of the product is maintained. Key factors that help improve production efficiency include: Precise adjustments: the ability to fine-tune the filling volume reduces oil waste. Reduced downtime: an intuitive design that simplifies maintenance and format changes. Smart automation: some processes (such as label management) can be automated, minimizing manual intervention. Nedpfx Asvvapxeanolk All these features make the Polaris Monoblock (M278) a valuable asset for those looking to improve their bottling line’s performance, ensuring a continuous and reliable workflow.

Condition: new, functionality: fully functional, Year of construction: 2025, controller manufacturer: Self-developed brand, workpiece length (max.): 2,000 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, machine/vehicle number: 2016, Product Features: The KaFe manual Panel Bender (Bending Center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per cycle. Full servo control ensures product accuracy within 3 seconds. Nlodpexu Uhvefx Aansk Product Function: The KaFe Manual Panel Bender (Bending Center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance corporate image in the sheet metal industry.

Condition: new, TC 205 x 1000 Center height: 205 mm Swing diameter over bed: 410 mm center width: 1000 mm bed width: 260 mm spindle nose: DIN 55029 (Camlock) 9, size 6 traverse path cross slide: 220 mm travel top slide: 125 mm spindle bore: 52,5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Stepless Mechanical preload stages: 2 motor power: 3,75 kW coolant pump: 0,13 kW longitudinal feeds Z: 0,05 - 1,7 mm/rev face feeds X: 0,025 - 0,85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametrical threads: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Internal taper quill: MK 4 quill stroke: 150 mm dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control ( 2 preload stages ) - Fine balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge Scope of delivery: - 3-axis digital display (resolution 0.005 mm) - 3-jaw lathe chuck - Quick-change tool holder with four cassettes - High splash guard rear wall and integrated LED tray light - Chip tray can be pulled out to the front - Slipping clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine shoes (1 set of 6) Nledoir If Dopfx Aanjk - Two emergency stop buttons - Foot pedal with double braking device ( mechanical and electrical ) - Limit switch secured chuck protection, rotating steel holder protection and cover of the leading and traction spindle according to the European safety standards CE - Coolant device - 2 fixed center punches - Reducing sleeve for main spindle - Operating tool - Operating tool in tool box - Operating manual with spare parts list

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 113738AB, feed length X-axis: 4,000 mm, feed length Y-axis: 5,800 mm, feed rate X-axis: 44 m/min, cutting height (max.): 250 mm, disc diameter: 700 mm, saw blade width: 700 mm, RANDEK SPL728 is an industrial CNC-controlled cross-cut saw designed for the precision processing of structural timber. This machine is engineered for continuous, demanding production environments, ensuring high cutting accuracy and consistent quality for every component. The saw can perform straight, angled, and compound cuts, making it especially suitable for manufacturing roof trusses, timber frames, and prefabricated building components. The integrated control system features a graphical touch-screen interface, enabling the operator to clearly visualize each part during production and significantly reducing the risk of operational errors. The RANDEK SPL728 supports importing cutting data from CAD systems via ASCII files and can be seamlessly integrated into the company network. This capability allows efficient management of complex cutting lists, quick changeovers, and optimised production flow. Developed with a strong emphasis on precision, reliability, and operator safety, the machine guarantees stable material positioning throughout the cutting process, ensuring high-quality and repeatable results. The RANDEK SPL728 is a reliable solution for manufacturers seeking a professional, durable, and highly productive timber cutting system. Nsdpfjx Nhhbox Aanolk

Condition: new, neu Bulgarien 122250 € 2310.53 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 M 5 - 1000 Nlodpfx Aaswiqwfenjk 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 107 770,00 turning length2.000 mm € 112 550,00 turning length4.000 mm € 130 160,00 turning length5.000 mm € 141 250,00 turning length6.000 mm € 157 780,00

Condition: used, maximum load weight: 69,800 kg, overall weight: 97,000 kg, axle configuration: > 3 axles, first registration: 09/2014, total width: 2,750 mm, total height: 2,900 mm, Equipment: ABS, Special low loader for long and heavy transport, the low bed has a loading area of approx. 7,700 mm, plus 5,300 mm telescopic, the low bed can be turned into a platform (length 15,305 mm - telescopic up to 20,605 mm), the loading height as a low bed is approx. 420 mm, the loading height as a platform is approx. 800/900 mm, the low bed can be widened up to 3,200 mm, axles: DOLL panther technology, double wishbone suspension, with hydraulic suspension, 12,000 kg per axle, fifth wheel load 25,000 kg, payloads up to approx. 80,000 kg suitable, only at reduced speed, dimensions without DOLLY axles at the front: length approx. 17,350 + 5,300 mm telescopic, empty weight approx. 21,600 kg, payload up to approx. 69,650 kg, only suitable at reduced speed, new price today approx. 460,000 euros net Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to make you a financing or leasing offer for this object. Nedpfjvzi Etsx Aanelk Please contact us!

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Njdpfx Aox H Tilsanelk Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: used, Year of construction: 2019, Overview This isobarometric filling and capping machine was built in 2021 by the German manufacturer Markl. The machine was built for filling glass bottles and crown caps but can be modified to can filling by the manufacturer.    Technical Details  Type: Bavaria 40/8 Isobarometric filler for glass bottles  Capacity: 3,000-13,500 bottles/hour at 0,33L; 3,000-12,000 bottles/hour at 0,5L  Number of long-tube filling valves: 40 Number of capping heads: 8 Formats:  0,33L longneck 0,33L Steinie 0,5L NRW Pre-evacuation system to reduce oxygen pickup Counter-pressure filler hygienic bottle table made of stainless steel (AISI 304)   Running direction: left - right machine in good condition Nledpfxjx Natvj Aanok

Condition: new, Technical data: Drill diameter: 3 - 32 mm Point angle: 90° - 140 Speed of grinding wheel: 4800 1/min Connection: 230 V Motor power: 0,25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Features: - Ideal for grinding HSS/hard metal twist drills. - Easy operation - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device for perfect centering of the drill on the workpiece and to reduce the feed force during drilling - Device for relief grinding of the drill cutting edges to reduce friction between the drill and the workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 10 ER collets ER 3 -12 mm, 20 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) Nljdpfxeh Hyrbo Aanek - Collet holder ER 20 and ER 40

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 168 kg, warranty duration: 6 months, temperature: 155 °C, HOT WATER WASHER KARCHER HDS 10/20-4M 2017 year of production The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient, low-speed three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 200bar and 1000l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model HDS 10/20-4M Supply voltage 400V ~ 3 phases Pressing capacity (l/h) 500 - 1000 Working pressure (bar) 30 - 200 Max. water heating temperature (C) 155 - 80 Connection power (kW) 7.8 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 168 Dimensions (length x width x height mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun by German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for dosing of cleaning fluid directly through machine Very legible and intuitive control panel Simple design and good access to individual elements under the housing make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and scale accumulation inside the heating coil and other pipes. Exhaust gas temperature sensor turns off the engine at temperatures exceeding 300°C After switching on the eco!efficiency function, the device heats the water to 60°C, which allows for effective cleaning of even heavy dirt, while reducing fuel consumption by about 20% Nsdpfxswtnq Rs Aanjlk

Condition: new, Year of construction: 2025, neu 2025 090039 prompt, Zwischenverkauf v Spanien 15800 € 273.02 € 1 1 14220 € 50 to 177 mm 5 1 31 x 12 mm 34 1/min 350 x 15 mm 80 x 8 mm 35 / 30 mm 10 mm 100 x 10 mm 3 kW 1300 mm 1100 mm 1850 mm 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive Nledpewirahsfx Aanjk 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: used, maximum load weight: 75,950 kg, overall weight: 1,02,000 kg, axle configuration: > 3 axles, first registration: 07/1984, loading space length: 14,770 mm, loading space width: 2,740 mm, total width: 2,750 mm, total height: 2,500 mm, SCHEUERLE heavy-duty fifth wheel platform combination gooseneck + 3-axle chassis number: 6573, plus K 60/4 chassis number: 6576, gooseneck hydraulically adjustable (LxWxH) 3470x2445x300 mm, separate HATZ diesel engine, hydraulic raising and lowering of the loading area (LxW) 11300x2470 mm, 8 tires per axle, tire condition very good, steered pendulum axles, load capacity - axle loads technically possible at reduced speeds, total weight approx. 133 t. or 147 t., good condition, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! The vehicle may have advertising on it and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Nledpfx Asvnpqcoanok Please contact us!

Condition: used, Year of construction: 2009, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Nlsdpjx H Tgdofx Aanok Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts.

Condition: new, Technical data: Drill diameter: 3 - 20 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,12 kW weight, approx.: 8,6 kg Dimensions, approx.: 290 x 150 x 180 cm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Rotor with precision ball bearing Nedpfx Aash Hyqwonolk - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 14 - 20 mm - Collet holder ER 20, ER 25

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, overall weight: 168 kg, warranty duration: 6 months, temperature: 155 °C, HOT WATER WASHER KARCHER HDS 10/20-4M 2018 year of production The device has new accessories, including a gun from the German brand R+M, a stainless steel lance, a steel braided hose and a 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient, low-speed three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 200bar and 1000l/h, the machine can be effectively used for heavy work in construction, the logistics industry and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model HDS 10/20-4M Supply voltage 400V ~ 3 phases Pressing capacity (l/h) 500 - 1000 Working pressure (bar) 30 - 200 Max. water heating temperature (C) 155 - 80 Connection power (kW) 7.8 Nlsdpfswhu R Tox Aansk Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 168 Dimensions (length x width x height mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun by German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for dosing of cleaning fluid directly through machine Very legible and intuitive control panel Simple design and good access to individual elements under the housing make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and scale accumulation inside the heating coil and other pipes. Exhaust gas temperature sensor turns off the engine at temperatures exceeding 300°C After switching on the eco!efficiency function, the device heats the water to 60°C, which allows for effective cleaning of even heavy dirt, while reducing fuel consumption by about 20%

Condition: used, Year of construction: 2012, operating hours: 43,373 h, Used Cap Applicator – Overview This used cap applicator, manufactured by Tetrapak, is designed for high-speed application of plastic screw caps onto carton packages in industrial packaging and beverage production environments. The Cap 30 Speed model supports efficient cap application at up to 12,000 caps per hour, making it a reliable choice for a second hand or used bottling line where consistent throughput and precise cap placement are critical. It is well suited for integration into modern packaging machinery setups and can operate as part of a larger used bottling line for beverage production. Nlsdpjx H Tc Eefx Aansk Engineered for accuracy and repeatability, the machine is compatible with Helicap 23 closures, commonly used in carton packaging applications. Its robust construction and proven Tetrapak engineering ensure stable performance for producers seeking to optimize industrial packaging efficiency without compromising quality. With testing available, this unit offers confidence in readiness and operational reliability. Technical Specifications & Performance Data Manufacturer: Tetrapak Model: Cap 30 Speed Alternate reference: Cap30 Speed Year: 2012 Production speed: up to 12,000 caps/hour Cap system: Helicap 23 (plastic screw cap) Cap size: 23mm Container type: Carton packages Advanced Automation & Control Systems The Cap 30 Speed is built for dependable, automated operation within demanding production schedules. Typical features include an intuitive operator interface for quick setup and monitoring, integrated safety logic, and precise actuation for consistent cap positioning. Designed for high uptime, the machine supports streamlined changeovers and consistent application pressure, helping maintain output quality and reduce stoppages across extended shifts in beverage production. Production Line Integration Capabilities This cap applicator integrates efficiently into upstream and downstream equipment within a used bottling line or complete packaging system. It can be configured for inline operation with conveyors and synchronization signals for smooth product flow. The Helicap 23 compatibility supports widely used carton formats, making it a strong fit for industrial packaging lines that require dependable throughputs and minimal bottlenecks. Its footprint and connection points are suitable for common layout configurations, and it can operate as a standalone station or as part of a synchronized multi-machine line. Machine Condition & Maintenance History The applicator is available with the possibility to test the machine, indicating readiness for operation and providing assurance of functional performance. As a second hand solution, it represents a cost-effective option for facilities seeking dependable capping capability with verifiable operation prior to installation. Operational Performance & Versatility At 12,000 caps per hour, the machine delivers consistent performance for high-volume carton capping in beverage production.

Condition: used, Year of construction: 2004, operating hours: 4,047 h, Technical Specifications & Performance Data The Tetra Pak TBA 19 100V is a proven aseptic filling machine engineered for high-reliability carton packaging in beverage production. This second-hand unit is tailored for UHT applications and supplied with a new 0.125 L Slim format kit, ensuring efficient, hygienic, and cost-effective industrial packaging. Ideal for producers seeking a used bottling line component with dependable performance, the TBA 19 integrates seamlessly into modern processing environments. Manufacturer: Tetra Pak Nsdpfxsx H S Sfe Aanslk Model/Version: TBA 19 100V Filling type: Aseptic (UHT) Year of manufacture: 2000 Working hours: 4,047 Production speed: up to 7,000 packs/hour Primary format: 0.125 L Slim (new 2026 format kit included) Container type: Carton (Tetra Brik Aseptic) Application focus: UHT milk and juice Advanced Automation & Control Systems Designed for consistent performance in aseptic conditions, the TBA 19 100V benefits from Tetra Pak engineering for streamlined operation and reduced downtime. The machine supports integrated line controls and is compatible with standard production monitoring and printer/coder interfaces used across beverage packaging machinery. Quick-format change for the 0.125 L Slim package minimizes line interruptions and enables efficient production planning. Production Line Integration Capabilities The filler can operate as a standalone station or as part of a complete used bottling line. It is compatible with essential downstream equipment, enabling full industrial packaging workflows for beverage production. Optional modules can be added to expand functionality and improve throughput. Optional equipment: TSA21 straw applicator Material handling: Easy rider/conveyor system and conveyor line End-of-line: Packer system Controls and coding: Line controller with Domino printer Utilities: Paper trolley and ancillary accessories These options support efficient integration with existing packaging machinery and enhance overall line performance. Machine Condition & Maintenance History The machine is offered after maintenance, with the possibility of immediate delivery in as-is condition or delivery post-maintenance within a standard lead time. With only 4,000 operating hours, this second-hand aseptic filler represents a low-wear asset for producers looking to upgrade capacity or standardize on Tetra Pak carton formats. Operational manuals and know-how transfer are available to facilitate rapid commissioning and onboarding. Operational Performance & Versatility Optimized for UHT applications, the TBA 19 100V provides stable aseptic filling for milk and juice products in 0.125 L Slim cartons. Its hygienic design supports consistent product quality and shelf stability expected in long-life beverage production.