Used Remaining Stock for sale (12,267)

Year of construction: 2008, condition: ready for operation (used), Some small equipment is available. 1) Water treatment system BWT, year of manufacture: 2006, tanks: 2, max. operating pressure: 10bar, max. test pressure: 11bar, max. operating temperature: 50°C, volume: 48l, control system: BWT Soft-Control II. 2) Weishaupt burner L1Z-B, year of manufacture: 2008, power range: 70kW-415kW. 3) Wet cooler. An on-site inspection is possible. Djdox I Rn Iopfx Afpekh

Condition: ready for operation (used), A high-cube industrial container including two control cabinets, a twin-shaft shredder, and various conveying and transport systems is available as a package offer. 1) Industrial container with double-side opening and base frame. Contents: screw press discharge unit, hopper, vacuum drum, vacuum pump Atlas Copco DZS 300V, condensation unit, and various auxiliary electric motors. 2) Control cabinet with Siemens Simatic S7-1500 control system, control panel: Siemens KTP 700. 3) Control cabinet with Siemens Simatic S7-300 control system. 4) Industrial twin-shaft shredder, rotor shafts: 2, motor/gearbox: Brevini/Dana. 5) Conveying and transport system with an attached feeding unit. The container, its contents, and all listed units are part of a package offer. An on-site inspection is possible. Dedjxpw T Rjpfx Afpekh

Year of construction: 2014, condition: ready for operation (used), Various machines for the shoe manufacturing industry are available. 1) Edge hammering machine Albeko 119, machine dimensions X/Y/Z: approx. 700mm/500mm/1200mm, weight: approx. 70kg. 2) Skiving machine Fortuna KS-P, grinding wheel diameter: 80mm, speed: 3000rpm, machine dimensions X/Y/Z: approx. 800mm/600mm/1100mm, weight: approx. 120kg. 3) 3x skiving machines Fortuna 3 SE-FZ, years of manufacture: 1982/?/?, skiving speed: 20m/min, machine dimensions X/Y/Z: approx. 850mm/600mm/1150mm, weight: approx. 150kg. 4) Die press Schön 22K, year of manufacture: 1993, pressing force: 20t, pressing area X/Y: 400mm/400mm, stroke: 80mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1600mm, weight: approx. 850kg. 5) Thermal transfer stamping machine Transmatic TMA 24, year of manufacture: 2003, max. temperature: 200°C, working area X/Y: 200mm/300mm, machine dimensions X/Y/Z: approx. 800mm/700mm/1200mm, weight: approx. 150kg. 6) Edge hammering machine Colli BS 3, year of manufacture: 2014, machine dimensions X/Y/Z: approx. 600mm/450mm/1250mm, weight: approx. 70kg. An on-site inspection is possible. Dedpfx Afexnp R Sepjkh

Year of construction: 2018, condition: ready for operation (used), Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible. Dkjdpfx Afeu Tuvcepeh

Condition: ready for operation (used), Year of construction: 1992, Two peripheral devices for an injection moulding facility are available. 1) Compressor Atlas Copco GA 15, year of manufacture: 1992, air flow rate: 28.2l/s, motor power: 15kW. 2) Dryer Atlas Copco FD 40, operating pressure: 20bar. Documentation available. An on-site inspection is possible. The machines are ready for loading. Sale of individual units is possible. Dsdpjw R Uzcofx Afpokh

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Dedswty Etopfx Afpskh

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Dksdpsv Extbofx Afpsh

Year of construction: 1970, condition: ready for operation (used), Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible. Dkodpfx Aou Eumhsfpsh

Year of construction: 1997, condition: ready for operation (used), Various devices and machines are available. 1) Small vibrating mill William Boulton. 2) Compressor motor KDT 2.80, power: 2.3kW, quantity: 3. 3) Roof ventilator, quantity: 2. 4) Oven. 5) Pump (DIA) SZ80-1KR 225. 6) Robot Fanuc M-410i, year of manufacture: 1997. On-site inspection is possible. Dksdpfown H Uwex Afpoh

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Dksdpfx Afjwwvwyopoh

Condition: good (used), Year of construction: 2001, functionality: fully functional, Stock laminating machine Type: 134R5-1500 P Dkjdpfx Asyhn Dfsfpjh Year: 2001 Max. sheet size: 1420x1620 mm Min. sheet size: 500 x 500 mm Printing sheet: Paper from approx. 180 g/m² Cardboard from approx. 400 g/m² Carrier sheet: Corrugated board up to approx. 7.0 mm thickness Cardboard/solid board from 0.6 mm

Condition: used, Year of construction: 2000, The Stock A-14 V567A/1650P is a high-speed laminating machine designed specifically for the packaging industry. It integrates advanced technology to efficiently laminate various materials, providing enhanced durability and protection to packaging products Format: 1640 x 1640 mm Equipment: Feeder: Edge Feeder (MIRUS) Sheet feeder by carrier chains Press Station Speed: 3,000 cycles/h Control device: Siemens SPS-Control / Micro Control System Gluing Station Laminating Station Dedpowcqwxsfx Afpekh Technical Details Size max: 1640 x 1640 mm Size min: 500 x 500 mm Sheet weight: Cardboard 100 - 800 g/qm Infeed height: 1,400 / 1,800 mm Carrier Sheets: one-sided corrugated board, E/B- and F-Flute, two-sided corrugated board up to 7 mm thickness cardboard from 0.5 mm thickness

Condition: good (used), Year of construction: 1995, Stock drum bucket + press belt Type: SFAM 712_G Year: 1995 Max. size: 1650mm Dodpfx Aeu Ucluefpokh Press belt Tünkers

Condition: good (used), Year of construction: 2000, Max. Sheet format. 1420 x 1620 mm Min. sheet format: 500 x 500 mm - with MIRUS sheet feeder, type HSII - Suction belt sheet feeder, type 4R - Press belt, type 5 - Package turner (forks) with non-stop device, type 8 - Pile stacker with non-stop roller carpet, type 7 Technical data: Dodetru Hzspfx Afpskh Working width: 1500 mm Max. Sheet width: 1420 mm Max. Sheet length: 1640 mm Lamination tolerances: +/- 1.5 mm Material thickness: - Carrier material from 0.6 - 7 mm. Single-sided corrugated board only runs through the machine with a stationary flute. - An additional needle bar is required for cardboard of approx. 400 - 500 g/m². is required. - Cover sheet from approx. 180 - 400 g/m². Deviations possible depending on material properties.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, working width: 2,050 mm, Stock laminating machine Type: A-14R55A6L7N8N/2050P Year 2016 Max. size: 2050 x 2050 mm Min. size: 500 x 500 mm Print sheet thickness: 100-800 gr. Tolerance: +/- 0,5mm Carrier sheet thickness: Dkedouwntropfx Afpoh Cardboard from 350 gr. (0.5 mm upwards) Corrugated board up to 7.0 mm Solid board up to 2.5 mm - Flush laminating machine - Pile turner

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 6676, For sale: Spray Autoclave manufactured by Neuweiler. The interior is made of V2A stainless steel, insulated, and clad with aluminum or stainless steel sheet. Various programs available: - Sterilization by spray process based on time or F value. - Steam treatment by time or F value. (Probe sensor) Core temperature indication and control included. Djdpfsxqnqisx Afpokh Connections: Water, compressed air, steam, waste water, and venting. The autoclave was only operated 3 to 3.5 months per year since its initial commissioning. It was used to sterilize pre-packaged foods in aluminum pouches. It has not been in operation for 2 years, but remained installed and connected. Every few weeks or months, it was switched on and run empty. For further questions, please contact me. Thank you. Are you looking for machinery for your production? Contact us, we are happy to assist you.

Condition: like new (used), 800 m² storage platform Schäfer R3000 3-story used, top condition, as good as new, see pictures 3 floor shelf system Schäfer Lift included Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Dkjdohzw Ivspfx Afpjh Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: good (used), Year of construction: 2004, Fasson gluing machine - infeed width 2100mm Dkjdperwi N Hsfx Afpeh - with press belt - Meler hot melt gluing machine with 4 heads year 2021

Condition: new, Year of construction: 2024, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for un-mand production. Dkedpfx Afektffzepsh Effective cutting diameter for round pipes Ø10 mm – Ø225 mm Effective cutting size for square pipes □10 mm – □225 mm X/Y/Z axis travel 270 / 6,900 / 230 mm X/Y/Z axis motor power 0.75 / 2.9 / 0.75 kW Positioning accuracy ±0.1 mm Repeatability accuracy ±0.1 mm Maximum travel speed Y axis 110 m/min Universal maximum rotation speed 120 r/min Maximum acceleration 1.5G Maximum pipe feed length 6,200 mm Maximum load weight 300KG Total electrical power of the machine 22 kva Machine size 10.400 x 2.180 x 2.400 mm The weight of the machine 3 ton

Condition: new, Year of construction: 2025, Cutting Mill PC52120R 75 kW in stock Rotor diameter (mm): 520 Rotor width (mm): 1200 Drive (kW): 75 Dedpjydcmmsfx Afpskh Rotor knives (rows): 10 Stator knives (rows): 6 Weight (kg): 5200

Condition: new, Year of construction: 2025, Cutting Mill PC52120R 75 kW in stock Rotor diameter (mm): 520 Dodpjydclvefx Afpokh Rotor width (mm): 1200 Drive (kW): 75 Rotor knives (rows): 10 Stator knives (rows): 6 Weight (kg): 5200

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Dsdoq Sp Enspfx Afpokh Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT4080 Main motor power: 37 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Dksdpfx Asq Sp D Usfpsh Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Year of construction: 2021, condition: new, Knives mills PC42100R 45kw in stock Rotor diameter (mm): 420 Rotor width (mm): 1000 Dsdoicz Drjpfx Afpokh Motor (kW): 45kw Rotor knives (pcs): 6 Fixed knives (pcs): 2 Weight (kg): 3200

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines Djdpfxeq Sp Eko Afpjkh