Used Revolver for sale (266)

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device Itodszuyfaepfx Adlol *

Condition: used, Hand revolver lathe: GDW Type/Model: RD 250 Condition: Used Center height: 125 mm Distance spindle nose – revolver head max.: 400 mm Swinging diameter over bed: 260 mm Swinging diameter over cross slide: 128 mm Spindle head DIN 55027: Size 4 Spindle bore: 38 mm Internal taper similar to DIN 228: MK 5 Collet bore: 26 mm Continuously variable up to: 60-3,000 rpm Frequency-controlled AC motor 100% ED, 70 Hz: 4.6 kW Revolver slide travel: 100 mm Cross slide travel: 90 mm Revolver tool holder: 6 x 3/4" Length x Width x Height: approx. 1300 x 700 x 1,400 mm Weight depending on equipment: approx. 520 kg Connected power: 9 kW Equipment: -Vibration-damped direct drive to the main spindle, continuously variable with magnetic brake for the main spindle and spindle stop in case of emergency stop Itsdpfszcb Rusx Adlel -6-position inclined revolver slide with Ø ¾" tool holders -Continuously variable feed rate adjustment -For revolver slide with feed drive -Collet chuck (pneumatically operated) -Extensive collet set -Emergency stop button -Coolant system -Spindle guard

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added according to customer requirements. The MEBR+ operates in full rotation and semi-rotation modes. The semi-rotation mode is suitable for small print runs, while the full rotation mode is ideal for large print runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and deceleration phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system, which ensures excellent web tension control when the machine operates in semi-rotative mode. Standard features: - Maximum rotation speed 200 m/min (656 ft/min) – label stock - Maximum rotation speed 120 m/min (394 ft/min) – die-cutting, precision fit - Maximum semi-rotation speed 40 m/min (131 ft/min), depending on the plate size – die-cutting, precision fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter, as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of rotary knives with lateral adjustment Ijdpfezqnxtsx Adlotl - 2 interchangeable pneumatic unwinders with a diameter of 25, 40, and 76 mm (1, 1.5, 3 in) - Detection of paper and matrix tears - Winding upon label entry/label exit - Remote support via internet connection - Automatic stop at the end of the parent roll with programmable end-of-roll function - Semi-automatic winding - Foot pedal for step-by-step machine operation - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotation mode - Die-cutting repeats 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotation mode - Maximum winding diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwinding diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 anti-static bar 1 "Clear-on-Clear" sensor 1 corona treatment 1 speed package (80 m/min in semi-rotation mode) 1 revolver unwinder 2 flexo unit for spot coating with rotating register 1 web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotary mode approx. 700 die-cutting sheets An MAHO extraction system for the trimming waste is available as an option at an additional cost!

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Ijdpfxjx I Nbto Adletl Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 9,300 km, power: 346 kW (470.43 HP), first registration: 08/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Like-new and excellently maintained M.A.N. 18-ton TGS flatbed truck with Palfinger PK 14.502 SH crane featuring 6-stage outriggers, a side reach of approximately 17 meters, and a vertical reach of approximately 20 meters, with remote control, 5 + 6 control circuits, a 6.20 m long flatbed, a payload of 6.1 tons, a 470 hp engine, and a wheelbase of 5.50 m, with only 9,300 km on the odometer, auxiliary drive, air suspension on the rear axle, intarder, air conditioning, auxiliary heater, digital mirror replacement system MAN Opti_View, and more. Equipment: 20,500 kg permissible total weight TGS TN long cab with bed and rear window Wheelbase 5,500 mm Euro 6 e engine 4x2 drive Unladen weight 11,860 kg Payload 6,140 kg with 18,000 kg permissible total weight Payload 8,640 kg with 20,500 kg permissible total weight New aluminum flatbed with split side panels and 4-way retractable boarding Flatbed dimensions approx. Length 6.20 m x Width 2.48 m x Height 60 cm Palfinger PK 14.502-SH folding crane, mounted behind the cab The crane has been inspected at a Palfinger workshop UVV crane certification valid until October 2026 Max. lifting moment 13.8 mt Only 610 operating hours according to the hour meter PAL com P7 remote control Engine Start/Stop with RPM increase Crane with 6-stage outriggers Rotation servo and grab control Oil cooler 10.5 kW Crane outreach up to 16.80 meters Lifting capacity at approx. 4.20 m / 2,950 kg // 6.20 m / 1,840 kg // 8.20 m / 1,300 kg // 10.30 m / 970 kg // 12.50 m / 780 kg // 14.60 m / 660 kg // 16.80 m / 530 kg 2-point hydraulic stabilizers with pivoting supports Transport position monitoring HPSC additional function 2. ballast Auxiliary drive, gear-dependent, type NH/4c, without flange, f=0.97, position approx. 3:30 Differential lock in rear axle MAN TipMatic 12.26 DD transmission MAN intarder with MAN EVBec, adjustable MAN Idle Speed Driving transmission function MAN freewheeling transmission function Air conditioning, Climatronic Water auxiliary heater, 4 kW Trailer hitch, ring-feder type 400 G 150A with pneumatic connections Permissible total weight of combination 44,000 kg Trailer load 26,470 kg Front axle with leaf suspension and rear axle with air suspension Front axle 9,200 kg, rear axle 13,000 kg Axle ratio i=2.85 Stabilizer for front and rear axle MAN EasyStart hill start assist Full brake assist Emergency brake assist EBA EBS ABS ASR ESP Lane departure warning LDW MAN Attention Guard Reversing warning Cruise control Sun visor Multi-function steering wheel Iodjy Rwb Hjpfx Adlstl MAN EasyControl control panel, 4 functions operable from the outside when the door is open Glass sunroof, electric Electrically adjustable and heated exterior mirrors Electric windows MAN SmartSelect infotainment control with touchpad and direct access buttons MAN Media System Professional Navigation 12.3 inch MAN Sound System Digital side mirrors Driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating Seat covers in comfort quality 2 air horns on the roof 2 revolving warning beacons, pre-installed Like-new condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information is without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2475

Condition: ready for operation (used), Year of construction: 2013, operating hours: 22,100 h, bar diameter (max.): 104 mm, overall weight: 13,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik, number of axes: 4, This 4-axis DMG CTX beta 800 4A was manufactured in 2013. It features a maximum turning diameter of 340 mm and a turning length of 735 mm. The machine is equipped with two 12-station tool turrets and an integrated spindle motor with a maximum speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTX beta 800 4A multi-spindle turning machine we have for sale. Contact us for further details. Isdezzpxpspfx Adlstl - Control: Siemens 840D Solutionline with ERGOline Control and ShopTurn 3G- Max Turning Diameter: 340 mm- Max Turning Length: 735 mm- Main Spindle (HS): Integrated spindle motor ISM 102, 40/48 kW (100/40% ED), 0-4000 rpm, 570/680 Nm- Counter Spindle (GS): Integrated spindle motor ISM 76, 25/32 kW (100/40% ED), 0-5000 rpm- Draw Tube Inner Diameter: 104 mm- Tool Turrets: 2x 12-station Sauter star turrets (VDI 40 with Trifix interface, DIN 69880-40)- Driven Tool Drive: 2x Direct Drive, 40-10,000 rpm, 14.2 kW, 34 Nm- Axis Configuration: 4 Main Motion Axes (X1, Z1, X2, Z2), 2 C-Axes with hydraulic spindle brake (HS + GS), Y-Axis for Slide 1 and Slide 2 (stroke 40 mm), NC cross-stroke X3 axis for counter-spindle slide (180 mm)- Counter Spindle Slide: Includes NC cross-stroke X3 (180 mm) with linear scale, and integrated tailstock- Tailstock: Automatic quill stroke 300 mm, tailstock force 1.5 - 6.3 kN, revolving center MT5- Measuring Systems: Direct measuring systems (Glass scales) in X1, X2, and X3 axes- Coolant System: 980 Liter tank with band filter, cooler, 8/20/80 bar pressure options, and expansion for Turret 2- Additional Equipment: Chip conveyor, automatic electric sliding hood, workpiece in-process measurement system (Renishaw), Brankamp CMS collision monitoring system, mechanical oil mist separator (1,100 m³/h) Technical Specification Counter Spindle Yes

Condition: used, mileage: 3,30,789 km, power: 335 kW (455.47 HP), first registration: 11/2008, fuel type: diesel, empty load weight: 15,400 kg, maximum load weight: 10,600 kg, overall weight: 26,000 kg, tire size: 385/55/315/70 R 22,5, axle configuration: 6x2, wheelbase: 5,100 mm, brakes: retarder, color: silver, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 6,200 mm, loading space width: 2,440 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, differential lock, parking heater, trailer coupling, Vehicle location: Bovenden. Aluminum body, large compartment, high roof, 1 comfort seat, 2 sleeping bunks, electric mirrors (heated), electric window left/right, air conditioning, sun visor, auxiliary heater, Telligent automatic transmission II, ABS (anti-lock braking system), retarder, lifting/lowering function, differential lock, work lights, revolving beacon, steel/air suspension, rear axle liftable and steerable, trailer coupling with air and electrical connections, alloy wheels, lashing eyes, crane mounted behind cab, emergency stop, foldable, 4-point support (2 hydraulic, 2 mechanical), radio remote control, 6 hydraulic extensions, green environmental badge. Wheelbase: 5100 mm. Superstructure: Hiab 244 E-6, 16.1 m - 920 kg, radio-controlled, foldable. Excellent equipment, Mega Space cab, front axle capacity 9,000 kg. Disc brakes on front and rear axles. 50mm trailer coupling, parking air conditioning. Load chart: 2.4 m - 8,400 kg; 4.5 m - 4,600 kg; 6.1 m - 3,150 kg; 7.9 m - 2,280 kg; 9.8 m - 1,720 kg; 11.8 m - 1,340 kg; 13.9 m - 1,100 kg; 16.1 m - 920 kg. Hydraulic extensions possible up to 20.4 m - 600 kg. Servo rotation control. UVV inspection valid until 03/2026! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to modifications, prior sale, and errors! Iodpfjx Hx Nwsx Adlotl

Condition: used, mileage: 4,17,535 km, power: 316 kW (429.64 HP), first registration: 03/2006, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 16,500 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,200 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel-air, number of seats: 1, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, Lg. Haus, 1x comfort seat, 1x sleeper berth, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), constant throttle, AS-Tronic automatic transmission, differential lock, fog lights, revolving beacon, leaf-air suspension, trailer coupling with air and light connections, alloy wheels, low-noise G1, roof hatch, yellow environmental sticker Itjdpfx Ajvhkhpsdlsl Wheelbase: 3200 mm ZF 12 AS 2301 transmission, auxiliary heater, air conditioning, engine brake, XL cab, 1x sleeper berth, NO PASSENGER SEAT! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted!

Condition: excellent (used), Year of construction: 2003, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, spindle speed (max.): 4,000 rpm, table width: 1,200 mm, table load: 4,000 kg, table length: 3,860 mm, mount diameter: 50 mm, total height: 3,640 mm, total width: 4,500 mm, total length: 8,900 mm, rotational speed (max.): 4,000 rpm, workpiece weight (max.): 4,000 kg, overall weight: 24,000 kg, FIBRO indexing rotary table 800 mm Closed covered machine with doors for easy acces Indexing head 2.5 x 2.5 Degrees Automatic lubrication Double chain chip conveyor Under power 1e owner machine X - Travel: 3500mm Y - Travel: 1200mm Z - Travel: 1400mm Table Length: 3860mm Table Width: 1200mm Iodpfx Adezl Afdsljtl Table load: 4000 Table Ø: 800mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 30kW Speeds / ranges: 4000Rpm ATC / revolver: 30 Number of controlled axis:3 + 1 Chip conveyor: Yes Coolantsystem: Yes Length: 8900mm Width: 4500mm Height: 3640mm Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), 200030A) C.N.C. WORKING CENTER "NESTING" with 3-axes "BIESSE" Mod. Rover A - FT 1531 Gantry-drive (axe X) machine Numerical Control with Software bSolid (3D CAD-CAM) + bNest Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Ijdpfozygiiox Adlotl Automatic Tools Changing System with Tools storage plates Storage (revolver-type) with 8 folds (on Y-axe) Max. useful working area (X - Y - Z) mm 3100 x 1560 x 60 Vacuum pump 1 x 300 m3/h Separate electric and command cabinet WORKING GROUPS (TOP): No. 14 independent vertical boring spindles (7 in X + 7 in Y) No. 4 independent horizontal boring spindles (2 in X + 2 in Y) Drilling head BH 18 motor-power (Kw) 3 ca. No. 1 vertical Electro-spindle HSK F63 (Kw) 13,2 200030B) UNLOADING with roller conveyor (length approx. 3,500 mm)

Condition: used, mileage: 1,71,000 km, power: 130 kW (176.75 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 7,295 kg, maximum load weight: 4,705 kg, overall weight: 12,000 kg, tire size: 265/70R19.5, axle configuration: 4x2, wheelbase: 4,760 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 3, total length: 8,740 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 5,800 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, low noise, trailer coupling, Vehicle location: Bovenden, Kz. House, 2x comfort seat, electric mirrors, air conditioning, sun visor, cruise control, Telligent automatic transmission, ABS (anti-lock braking system), revolving warning light, leaf-air suspension, towing hitch air-light-hydraulic, low-noise G1, lashing rails, foldable crane at the rear, 2-point hydraulic support, 1xhydraulic extension, green environmental badge Wheelbase: 4760 mm, Body: flatbed with Fassi rear crane, type 95A21, foldable. Load diagram 2.0m-4,420kg, 4.10m-2,210kg, 5.9m-1,545 kg, hook operation, EURO 5 EEV engine Flatbed as new, from year 2020 FASSI F95A21 crane - year 2007 Crane: 2.0m=4420kg, 4.1m=2210kg, 5.9m=1545kg Itjdpfx Aowqdypjdlol (3 x mechanical extensions possible to retrofit for a surcharge then up to 12.0m=570kg) ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: excellent (used), Year of construction: 2014, Type: CNC horizontal contour cutting machine Manufacturer: Fecken Kirfel Designation C56 Year of construction: 2014 Dimensions: Cutting width 1300 mm Cutting length 1300 mm Cutting height 1300 mm Blade rotation of +/- 360 degrees Max. Cutting speed 25 m/min Info: Very well-maintained CNC contour cutting machine with revolving bandknife and automatic grinding device. High precision in the smallest of spaces. Very small footprint The machine is network-compatible and can be integrated into the Windows network. The machine is still in daily use and can be inspected by appointment. Further information on request Itedjr Ilb Sjpfx Adljl Available immediately Disassembly and transportation must be done by the buyer. Please also note our other sales ads

Condition: good (used), Year of construction: 2018, MACHINE STRUCTURE 2500X12000mm HEXA GV500 NUMERICAL CONTROL HEIGHT CONTROL PLASMA BEVEL HEAD 6-TOOL REVOLVER ISO30 DRILLING MACHINE INCLUDED: HYPERTHERM 400A GENERATOR NEW Iedpfx Adeq Abwpelotl WARRANTY 6 MONTHS

Condition: used, mileage: 7,57,305 km, power: 265 kW (360.30 HP), first registration: 03/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Special equipment: Work lights, aluminum air reservoir, driving assistance system: Attention Assist (drowsiness detection sensor), suspension: front springs 7.5 t, single leaf, tinted windshield with sun band, 10.4 cm info display with additional indicator, integrated rear end, communication interface, fuel tank: 290 liters aluminum, alloy rims 9.00x22.5 (ALCOA Dura-Bright), reinforced engine brake, PTO MB 131-2c, programmable special module, chassis lowering without residual air pressure control, tire pressure monitoring system, retarder, acoustic reverse warning (external warning signal), low-maintenance fifth wheel coupling, additional 24V socket in passenger footwell, preparation/switch for lift axle on trailer/semi-trailer, preparation for revolving beacon, transmission oil cooler Iedpfxsuh Ndwe Adlotl Further equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, trailer socket 24V / 15-pin, Antos, audio system: radio with USB port, exhaust to right exterior, exterior mirrors electrically adjustable and heated, 170 Ah battery, rear axle differential lock, medium size air pressure unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane keeping assist, cab: width 2.30 m, cab: hydraulic tilting equipment, cab: S ClassicSpace, cab: steel sprung, standard, cab: reinforced (Sweden), cab floor with 320 mm engine tunnel, suspension: leaf/air, suspension: front spring support aluminum, electric window lifts, generator 100 A, 12-speed transmission - type: G 211-12, urea tank (AdBlue): 60 l, manual tilting steel roof, rear axle crown wheel 440, body/superstructure: tractor unit, comfort central locking, 3-piece mudguards, unregulated power steering pump, front air intake, engine 10.7 l - 265 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3,700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat cover/upholstery: fabric, cab seats: passenger functional seat, cab seats: standard driver’s suspension seat, front splash protection, front axle stabilizer, cab socket 24V, tachograph / EC control device, aerodynamically shaped underbody paneling, front underrun protection, preparation for toll collection, cranked front axle, regulated water pump, gross vehicle weight permitted: 18.00 t * VIN: WDB96340310042344 * First registration: 30.03.2016 * Net price Tel./WhatsApp:

Condition: used, mileage: 5,21,699 km, power: 265 kW (360.30 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Special equipment: Work lights, aluminum air tank, driver assistance system: Attention Assist (fatigue detection sensor), suspension: front springs 7.5 t, single leaf, tinted windshield with band filter, info display 10.4 cm with additional indicator, integral rear, communication interface, fuel tank: 290 L aluminum, alloy wheels 9.00x22.5 (ALCOA Dura-Bright), reinforced engine brake, PTO MB 123-10b, frame lowering without residual air pressure control, tire pressure monitoring system, retarder, acoustic reverse warning (external warning signal), fifth-wheel coupling, low-maintenance, additional 24V socket in passenger footwell, preparation/switch for lift axle on trailer/semitrailer, preparation for revolving beacon, transmission oil cooler Additional features: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, trailer socket 24V / 15-pin, Antos, audio system: radio with USB port, exhaust to right side, exterior mirrors electrically adjustable & heated, battery 170 Ah, rear axle differential lock, medium compressed air unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane keeping assist, cab: width 2.30 m, cab: hydraulic tilting, cab: S ClassicSpace, cab: steel-sprung, standard, cab: reinforced (Sweden), cab floor with engine tunnel 320 mm, suspension: leaf/air, front spring bracket aluminum, power windows, alternator 100 A, gearbox 12-speed - type: G 211-12, urea tank (AdBlue): 60 L, manual lifting roof (steel), rear axle crown wheel 440, body/superstructure: tractor unit, central locking system, 3-piece mudguards, unregulated steering assist pump, front air intake, engine 10.7 L - 265 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axles, seat upholstery: fabric, cab seats: functional passenger seat, cab seats: standard driver's suspension seat, front splash guard, front axle stabilizer, 24V cab socket, tachograph/EC control device, aerodynamically shaped underbody panel, front underrun protection, toll recording preparation, cranked front axle, regulated water pump, permissible gross weight 18.00 t VIN: WDB96340310049335 First registration: 12.05.2016 Net price Iedpouh Nd Rsfx Adletl Tel./WhatsApp:

Condition: used, mileage: 2,12,275 km, power: 265 kW (360.30 HP), first registration: 01/2013, fuel type: diesel, empty load weight: 14,580 kg, maximum load weight: 11,420 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: retarder, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 6, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Lg. Haus, 1x comfort seat, double bench seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), retarder, power take-off (PTO), automatic transmission, differential lock, revolving beacon, storage box, air suspension, low-noise G1, lift and lower function, last axle liftable, last axle hydraulically steered, side aluminum underrun protection, roof hatch, green environmental badge. Wheelbase: 4200 mm. Superstructure: FAUN refuse collection body type Rotopress 521 L with Zöller lifter. Transmission: ZF 6 HP-602 with retarder. Accessory details are given without warranty. Subject to change, prior sale, and errors. Ijdpsy Ezqzjfx Adlstl

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Itjdsw Ew D Depfx Adlol Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Itedpfx Asy Ed Ddjdlol Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: used, mileage: 2,24,805 km, power: 330 kW (448.67 HP), first registration: 07/2016, fuel type: diesel, empty load weight: 13,050 kg, maximum load weight: 12,950 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,800 mm, next inspection (TÜV): 09/2026, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 7,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, high roof, 1x comfort seat, 1x bunk, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, auxiliary heater, air horn, switch 16, ABS (anti-lock braking system), traction control (ASR), PTO, differential lock, work lights, revolving beacon, storage box, leaf suspension, towing device air-light-hydraulic, aluminum tank, underrun protection, side aluminum guard, hydraulic cross lock, roof hatch, green environmental badge. Wheelbase: 4800 mm Body: 18t Hiab hook lift system XR18S59 up to 7 m container (extendable underrun protection). 8t front axle, disc brakes on front and rear axles, PTO NA MB 124-10c, MPA, N-/M-speed, used and new containers available at additional cost! Roll height approx. 1390 mm! ACCESSORIES DATA WITHOUT GUARANTEE, subject to change, prior sale, and error! Itedpfx Aoyw Truedlsl

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, •Revolver head overhauled in 2021 •High-pressure/high-flow KSS pump installed in 2021 •Draw tube renewed and spindle housing re-bearinged and lapped in 2022 •Prepared for automatic loading of parts using a robotic cell Control: CNC control including Siemens 840 D color screen Ijdpfx Aovr Tkzedlstl TECHNICAL DATA Turning diameter max. 550 mm Turning diameter max. 480 mm Turning length 1000 mm Spindle bore 78 mm Drive power (50%) 53 kW Speed range (1-stage) 30 – 4000 rpm Drum turret Number of positions 12, of which 6 are driven Cylinder shank 40 mm Speed range (2-stage) 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock controlled via program including various centering tips  Drum turret, 12 positions  Drive unit for turret  Chip conveyor  Coolant system with increased pump capacity, approx. 4 bar  Interface for automation  Various accessories  1 Heimbuch collet chuck SK 80, without collets  1 3-jaw chuck Schunk Rota NCF 315  1 3-jaw chuck Schunk Rota NCF 250  1 2-jaw chuck Schunk Rota NCF 250  1 Impact head WTO  2 driven tools CAPTO-axial tool  2 driven tools CAPTO-axial radial tool  3 driven tools CAPTO-radial tool  7 fixed tool holders  Mounting elements  Documentation

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 319 h, load capacity: 3,500 kg, lifting height: 4,200 mm, fuel type: electric, mast type: telescopic, construction height: 2,800 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Operational and fully functional Technical condition: Standard Front tires type: Superelastic Front tires size: 23x10-12 Rear tires type: Superelastic Rear tires size: 18x7-8 Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: Exide Battery type: PzS Battery year: 2019 Description: In addition to this unit, we offer further forklifts and warehouse equipment. All our machines are fully workshop-inspected and certified according to FEM 4.004. Please contact us via email or phone. You can also find us at hsr-gabelstapler. Of course, we are also interested in purchasing your used equipment, even if you do not buy a vehicle from us. Hire purchase and financing at favorable terms are available upon request. We are happy to offer you professional and comprehensive advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, load guard, safety light, interior mirror, revolving beacon, single-pedal control, LED, seat, Isdpfoyadd Esx Adlstl

Condition: used, mileage: 4,51,610 km, power: 324 kW (440.52 HP), first registration: 11/2007, empty load weight: 8,525 kg, maximum load weight: 9,475 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, low noise, onboard computer, parking heater, seat heater, Vehicle location: Bovenden, Lg. Haus, 1x air suspension seat, 2x sleeper berths, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, 16-speed manual, ABS (anti-lock braking system), constant throttle, PTO (power take-off), tipper hydraulics, central lubrication system, differential lock, work lights, revolving beacon, leaf-air suspension, aluminum tank, roof hatch, green emission sticker. Wheelbase: 3900 mm Engine: D2066LF36, Transmission: G 172 Z, Gearbox: 16 S 252 00326773, Front axle 1: VP-0904, Rear axle 1: HP-135204, Cab: LX ACCESSORY DETAILS WITHOUT GUARANTEE, Subject to changes, prior sale, and errors! Itedpoxga U Sefx Adlol

Condition: used, mileage: 54,325 km, power: 335 kW (455.47 HP), first registration: 07/2022, fuel type: diesel, empty load weight: 15,160 kg, maximum load weight: 10,840 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, next inspection (TÜV): 09/2026, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, fog lights, navigation system, onboard computer, parking heater, traction control, trailer coupling, Vehicle location: Bovenden, StreamSpace, Mercedes PowerShift 3, long cab, high roof, 1 comfort seat, 2 bunks, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, electric roof hatch, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, fog lights, work lights, revolving beacon, tool box, leaf and air suspension, last axle liftable and steerable, trailer hitch with air and light connections, aluminum tank, lashing points, U-shaped protection, side aluminum fender, tailgates, crane at the rear, emergency stop, grab control, foldable, 2-point hydraulic support, remote control, four hydraulic outriggers, green environmental badge Isdpfx Aoztl Nnsdlstl Wheelbase: 4900 mm Body: Crane Atlas 240.2E-A4, 12.3m = 1.56t, remote control, flatbed with aluminum side walls, FRONT AXLE 8.0 T, TRAILING AXLE, 7.5T, STEERABLE, RELIEVED, LIFTABLE, DISC BRAKE, ON FRONT AND REAR AXLE, SECONDARY WATER RETARDER, SMOKER'S PACKAGE, DRIVER'S COMFORT SUSPENSION SEAT, SEAT COVERS VELOURS, CURTAIN ACROSS IN FRONT OF BED(S), CABLE REMOTE CONTROL FOR AIR SUSPENSION, L CAB STREAMSPACE, 2.30 M, TUNNEL 170 MM, COMFORT CENTRAL LOCKING SYSTEM, LIGHT SENSOR, RAIN SENSOR, GEARBOX G 211-12/14.93-1.0, MERCEDES POWERSHIFT 3, MULTIMEDIA COCKPIT, INTERACTIVE, REMOTE ONLINE, TANK 630 L, LEFT, 650 X 700 X 1600 MM, ALUMINUM, AUTOMATIC HIGH/LOW BEAM AND CORNERING LIGHT, ENGINE OM470, R6, 10.7 L, 335 KW (455 HP), 2200 NM, ENGINE SPECIFICATION EURO VI, E, CHROME PACKAGE, INTERIOR, ESP, LANE KEEPING ASSIST, ATTENTION ASSIST, TRAFFIC SIGN RECOGNITION, ACTIVE BRAKE ASSIST 5, REFRIGERATOR IN DRAWER UNDER BED Load diagram: 4.5m-4780kg, 6.4m-3220kg, 8.3m-2400kg, 10.3m-1880kg, 12.3m-1560kg! Loading height approx. 1260mm! Crane hours approx. 830h. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 42,208 km, power: 159 kW (216.18 HP), first registration: 09/1983, fuel type: diesel, empty load weight: 7,570 kg, maximum load weight: 4,930 kg, overall weight: 12,500 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 6, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, fog lights, trailer coupling, Vehicle location: Bovenden, double cab, 1 air-suspended seat, electric mirrors, 5-speed gearbox, ABS (anti-lock braking system), PTO (power take-off), differential lock, fog lights, revolving beacon, storage box, leaf suspension. Wheelbase: 3600 mm Body: LF16/25 water tank fire engine with built-in FP 16/8 pump & 2800-litre water tank. Pump operating hours approx. 424 hrs. Sale to commercial customers or for export is subject to an additional 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and errors excepted! Isdpfx Asvllm Iedletl

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions Itjdpfxoux Si Hs Adlsl 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids