Used Revolving Center for sale (12,984)

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Codpfoypwbcex Agkspw Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: Codpfev Rgzwex Agkspw 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: good (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel paths X=2000 mm, Y=1500 mm, Z=1250 mm • Siemens 840 DsL CNC control • NC rotary table for 4-side machining 1250 mm x 1250 mm • Horizontal spindle HSK100 • Spindle 2500 rpm HSK 100, 2200 Nm spindle torque • Approximately 9500 spindle hours • Tool changer system HSK 100 / 40 positions • Chip conveyor • Coolant supply • Internal/external air blow-off device • High-pressure coolant 60 bar for deep hole drilling Cpjdpfxoyqxdbe Agkow • Full enclosure • Large interference circle 2300 mm • Double pallet changer • Short delivery time, subject to prior sale • Year of manufacture: 2010

Condition: like new (used), Year of construction: 2019, used vertical CNC machining center Manufacturer: Homag Model: Drillteq V-500 Edition25 Main operating hours: approx. 1,800 hours Working range X: 200 – 3,050 mm Working range Y: 70 – 850 mm Cpedeymz Rvopfx Agkew Working range Z: 12 – 60 mm, special workpiece thickness: 8 mm Vertical drilling spindles: 15 pcs Horizontal drilling spindles in X: 6 pcs Horizontal drilling spindles in Y: 4 pcs Grooving saw, swiveling 90° Grooving/milling unit for Clamex-P Dowel insertion stations (white glue) Milling spindle: 10 kW; 1,250 – 24,000 rpm 4-position tool changer (ATC) Workpiece clamping system with collet chuck Workpiece length: 3,050 mm Workpiece width: 50 – 1,250 mm Workpiece thickness: 8 – 80 mm; max. 60 kg weight CONTROL: POWERCONTROL PC86 power touch with FullHD multitouch display 21.5″, operating system Windows 10 Network connection, Tapio ready, fully prepared WoodWop 7.0 incl. MDC and production list software Basic barcode reading system Delivery includes only all tools and HSK holders shown in the photos!

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 224 mm, spindle bore: 52 mm, turning diameter: 360 mm, turning diameter over bed slide: 360 mm, turning length: 1,000 mm, total length: 1,850 mm, total width: 700 mm, total height: 1,290 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 90 rpm, swing diameter over cross slide: 224 mm, metric thread diameter (max.): 10 mm, bed width: 188 mm, Turning diameter in gap: 52 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 90 rpm, type of input current: three-phase, overall weight: 650 kg, UNIVERSAL LATHE WITH 2-AXIS DIGITAL READOUT, REMOVABLE GAP BED 360 x 1000 NEW EDITION OF THE POPULAR 360x1000 LATHES What sets our machine apart from other popular models on the market? What are the benefits when you buy from us? What is our new lathe like? Our company focuses on: PRECISION – Reinforced spindle bearing system increases lathe service life and boosts machining accuracy. INNOVATION – The latest model uses only top-quality, eco-friendly oils and lubricants, significantly enhancing machine performance and reducing noise levels by almost 10dB! ACCURACY – More precise digital readout for 2 axes. DURABILITY – A reliable machine for many years of dependable operation! TECHNICAL SPECIFICATIONS: SWING OVER BED: 360 mm SWING OVER CROSS SLIDE: 224 mm TURNING LENGTH: 1000 mm BED: INDUCTION HARDENED BED WIDTH: 188 mm SPINDLE BORE: 52 mm SPINDLE NOSE: D1-4 Cpjdpfx Agsyrq Nxokew SPINDLE SPEED RANGE: 90 - 2000 rpm MAXIMUM TOOL DIMENSIONS: 16 x 16 mm LONGITUDINAL FEED RANGE: 0.078 - 1.044 mm/rev CROSS FEED RANGE: 0.018 - 0.238 mm/rev METRIC THREADS: 0.45 - 10 mm INCH THREADS: 2.25 - 40 T.P.I. TAILSTOCK SLEEVE DIAMETER: 32 mm TAILSTOCK SLEEVE TAPER: MT4 MAIN MOTOR POWER: 1.5 kW COOLANT PUMP POWER: 0.1 kW DIMENSIONS: 1850x700x1290 mm WEIGHT: 650 kg THE MACHINE FEATURES A REMOVABLE GAP BED SECTION Standard Equipment: - 3-jaw lathe chuck, 200 mm - 4-jaw lathe chuck, 200 mm - 2-axis digital readout - Fixed steady rest - Traveling steady rest - Reducing sleeve - MT3 dead center - Coolant system - 24V lighting installation - Threading dial indicator Delivery Terms: - The machine is brand new - 12-month warranty - Warranty service - Post-warranty service - CE Declaration of Conformity - User manual (DTR) in Polish Delivery to the customer is available. Delivery cost according to individual shipping company quote.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Csdpfx Agjyn Emdjkjpw Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Kopf- und Drehtisch: 1600 x 1450 mm

Condition: excellent (used), Year of construction: 2011, used CNC machining center Nesting machine Manufacturer: Weeke Model: Optimat BHP 210 Year of manufacture: 2011 4-axis nesting machine O-TRIX work table 3700 x 2200 mm Vacuum pump 3 x 300m³/h with frame Cjdpfx Aoymzfgjgkjpw X-axis working area: 3700 mm Y-axis working area: 2100 mm Z-axis working area: 100 mm 25 vertical drilling spindles Milling spindle 12 kW up to 24,000 rpm with C-axis, 360° interpolation, liquid circulation cooling Air blast nozzle at milling tool, integrated in extraction hood – 14-fold tool changer, rear-mounted Lifting table for the system 3700 x 2100 mm, load capacity 3500 kg Stacking height 480 mm Intermediate handling table Vacuum arm for raw panel positioning, infeed bracket Ejector, conveyor belt 4000 x 2100 mm POWERCONTROL PC 85 control with 17″ TFT WoodWop 6.0 incl. MDE and production list software Woodnest Complete and Woodnest Professional Delivery includes only illustrated tools and HSK holders!

Condition: excellent (used), Machining Centre HOLZ-HER EVOLUTION 7405 -used- Throughfeed processing; 4-sided trimming possible; integrated vacuum pump; automatic suction cup positioning; hardened, dust-protected prism guides; ball screw drives on all axes; network card for remote maintenance; integrated control cabinet; control cabinet cooling with heat exchanger; manual control device; XL drilling head; saw unit for slotting in X direction; pick-up tool changer; automatic central lubrication. ----- Technical Data ----- Min. workpiece length X: 200 mm; Min. workpiece length Y: 70 mm; Min. workpiece thickness: 8 mm; Max. workpiece length X: 3,200 mm; Max. workpiece length Y: 920 mm; Max. workpiece thickness: 70 mm; Machine control software: CAMOUS HOPS; Main spindle motor power: 6.5 kW; Main spindle speed: 1,000 - 18,000 rpm; Main spindle taper: HSK-F63; Drill unit motor power: 1.7 kW; Drill spindle interface: M10, fitting diameter 11 mm; Number of vertical drill spindles: 13 units; Number of horizontal twin drilling spindles in X-direction: 2 units; Number of horizontal twin drilling spindles in Y-direction: 1 unit; Saw blade diameter (saw unit): 120 mm; Number of tools in changer: 6 units; Extraction port diameter: 2 x 120 mm + 1 x 140 mm; Required air volume: 4,100 m³/h; Required static vacuum: 2,500 - 3,000 Pa; Required air velocity: 30 m/s; Compressed air connection: 6 bar; Compressed air consumption: 300 l/min. Quality Information: - complete basic cleaning - electrics checked Codpeyrp Srefx Agkjpw - pneumatics checked - set according to manufacturer specifications - immediately ready for operation

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 14-1332-015/23270, functionality: fully functional, operating hours: 900 h, input voltage: 400 V, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 300 mm, number of slots in tool magazine: 14, controller manufacturer: OSAI, total height: 3,000 mm, total length: 5,400 mm, total width: 3,200 mm, overall weight: 4,100 kg, controller model: OPEN, spindle motor power: 12,000 W, nominal power (apparent): 28 kVA, number of spindles: 1, rapid traverse Z-axis: 20 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, CNC AES Vega Ultra 1332, purchased new in March 2024. Machine has seen minimal use and is in like-new condition. Fully functional, tested, and ready for immediate production. Original purchase price: €85,000+ Key Specifications 3-axis Gantry CNC (Pod & Rail) with 2 independent working zones Working area: 3200 × 1300 × 300 mm Maximum speeds (X / Y / Z): 100 / 100 / 20 m/min Automatic Tool Changer: 14 positions, HSK-63F Spindle: HSD 12 kW, air-cooled Boring head: HSD BHZ17 Controller: OSAI Open Smart Premium Components Yaskawa servo motors Güdel linear guides Festo pneumatics Schmalz vacuum system HSD spindle & aggregates High-end European components throughout, suitable for demanding industrial use. Installation & Support Remote or on-site installation support available if required. Cjdpfswlaxqsx Agkopw Commercial Details VAT: not applicable (reverse charge possible) Reason for sale: downsizing for family reasons Machine can be inspected under power. Additional photos, videos, or technical details available on request.

Condition: ready for operation (used), Year of construction: 2009, Used CNC vertical machining center Csdpfx Ageycplmjkepw

Condition: excellent (used), L & Z Lathe NARDINI Type MS 175 E Center height: 175 mm Swing over bed: 350 mm Cjdpsyq Nvnjfx Agkepw Distance between centers: 800 mm Spindle bore: 46 mm Spindle speeds: 25 - 2000 rpm Weight: 1250 kg

Condition: good (used), Year of construction: 1976, operating hours: 9,999 h, functionality: fully functional, machine/vehicle number: 46244066, Technical Data for Technica AG / TECHNICA Type 5100 (also ZSM 5100 / AG 5100) Center / Center Hole / Universal Grinding Machine Technical Data – TECHNICA / ZSM 5100 Max. workpiece diameter approx. 125 mm Min. workpiece diameter approx. 8 mm Max. workpiece length / center distance approx. 1,100 mm Models up to 2,000 mm Minimum workpiece length 50 mm Maximum workpiece weight approx. 120 kg Certain versions up to 250 kg Cjdpfxjxda Duj Agkspw Center hole diameter approx. 2-50 mm Taper angle of center hole approx. 60° Grinding wheel speeds depending on wheel diameter approx.: Ø 15 mm: 45,000 rpm Ø 27 mm: 22,500 rpm Ø 48 mm: 13,000 rpm Machine weight approx. 460 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM 326-2510, Used CNC Vertical Machining Center Make: Stama Model: MC 326 – Twin-Plus Year of manufacture: 2004 Machine type: Vertical Double-Spindle Machining Center Control system: Siemens Sinumerik 840D Powerline Travel paths (working area) X-axis: approx. 520 mm Y-axis: approx. 300 mm Csdoyklycopfx Agkepw Z-axis: approx. 360 mm Spindle & Tooling Number of spindles: 2 (twin/double spindle) Spindle taper: HSK-A63 Max. spindle speed: approx. 10,000 – 12,000 rpm Spindle distance: approx. 200 mm Tool magazine: Chain magazine with 2 × 30 positions Table & Workpiece Worktable: Stationary, suitable for clamping devices or additional units Weight & Dimensions (approx.) Machine weight: approx. 6,500 kg Footprint: approx. 3.0 × 4.2 × 2.8 m (L×W×H, without auxiliary units)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: KMM 334-2052, Used CNC Vertical Machining Centres – 3-axis CNC (X/Y/Z) X travel: approx. 800 mm Y travel: approx. 400 mm Z travel: approx. 350 mm Control: Siemens 840D Tool magazine: approx. 42 positions (depending on equipment) Spindle taper: HSK 63 Max. spindle speed: ~10,500 rpm Spindle drive power: approx. 18.5 kW Weight: approx. 7,500 – 8,800 kg Dimensions: ~3.5 × 3.5 × 3 m (L×W×H) Cpjdpfxsyklx Sj Agkow

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Csdpfjyk S Hpsx Agkjpw Model: DMU 70VL Year of manufacture: 2001

Condition: used, Year of construction: 2009, x-travel 500 mm y-travel 350 mm Cpjdpfoyq Skujx Agkjw z-travel 510 mm control MSX-711 IV rapid speed 50/50/40 m/min table surface area Ø 350 mm table rotating 360.000 x 0,001 ° table swivelabel ° table load 0,1 t turning speed range 20.000 U/min power capacity - milling spindle 22/11 kW no. of tools in the magazine 64 Stück tool taper HSK -A63 | weight of the machine ca. 10,0 t dimensions 3,8 x 2,2 x 3,35 m Used full 5- axis machining centre in very good condition - turnable und swiffeling table - chip conveyor - internal coolant with band filter - absolute scale - big tool magazin - air though the spindle - 3D touch probe Renishaw - coolant gun - new spindle appr. 5 years ago

Condition: used, Year of construction: 2008, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center with 4th axis - chipconveyor Cpsdpowvl Aiofx Agkow - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, 1HRT 210 A with tailstock - Oil dust collector

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. spindle taper 50 SK spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm Cpsdpoyrqhbefx Agkjw - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 1st. November 2024): - Control on: 60.818 h - Machine on: 59.598 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: good (used), Year of construction: 2008, Fagor digital display Centre height over bed: 290 mm Swing diameter over bed: 580 mm Distance between centres: 1000 mm Spindle speed: 20 - 2000 min⁻¹ Tailstock Cpsdpfxsyn Sqpe Agkjw Multifix system

Condition: used, Year of construction: 2020, Technical details: x-travel: 1530 mm y-travel: 530 mm z-travel: 465 mm side by side, right side fixed table X =: 925 mm side by side left side 2 axis table X =: 780 mm Cedpfx Aoyqyfgjgkjpw control: Heidenhain TNC 640 tool magazin:: 122 SK 40 spindle turning speed - stepless: 12.000 1/min Spindle Torque: 120 Nm power capacity: 22 kW Fixed Table Dimensions: 920 x 540 mm Table load fixed table: 2000 kg Max. parts size on fixed table: 900 x 500 x 400 mm Diameter of integrated 2-axis rotary table: 650 mm Table load rotary table: 500 kg B-axis swivel angle: -90°/+110° ° / deg Max. parts size on rotary table: 600 x 500 x 400 mm Max. Parts size over both tables: 1500 x 500 x 400 mm internal coolant system feed: 70 bar bar weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,65 x 2,53 x 2,81 m Accerories pendant hand wheel HR 510 FS Rotoclear window Automatic machine switch off after prog. cycle end Measuring probe for work piece Blum TC 52 Coolant gun The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent condition. 122 tool holdersr SK 40 come with the machine. A special vice from Gressel for 5-axis machining for the rotary table also comes with the machine. *

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Cedpfeyqybbsx Agkepw Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: new, Year of construction: 2025, functionality: fully functional, 5 AXIS Machining Center 2131 X, Y, 2100 X 3100MM MOVEMENT RANGE Z AXIS RANGE 1000 MM FOR 5 AXIS HEAVY MACHINES HITECO 17KW S6 TILTING/ROTATION HEAD KIT AXIS RANGE A= +- 185°, C= +- 320°, ORBITAL K PLUS PX-2 15/12 63F NC HSK63 OMRON AC SERVO DRIVE KIT OSAI OPENKEY INDUSTRIAL REAL TIME CONTROL SYSTEM EUCHNER HBA-103037 MANUAL MANIPULATOR Cpjdpfeu U Hmpox Agksw CONTROL CABINET AIR CONDITIONING LINEAR MAGAZINE 18 POSITION 16 POSITION HSK63F TURRET MAGAZINE CORRECTION MAP RENISHAW TS27R TOOL MEASURING PROBE SKF AUTOMATIC CENTRAL SOLID GREASE LUBRICATION

Condition: good (used), Year of construction: 1997, Mikron UM 600 CNC Milling Machine Technical Specifications Manufacturer: Mikron AG Biel, Switzerland Model: UM 600 TNC 410 Machine Weight: 3,340 kg Power Supply: 3-phase 400 V 50 Hz Current Consumption: 40 A Connected Load: 15 kW Control Voltage: 24 V DC Control System: Heidenhain TNC 410 Cpsdpfx Aeyrhghjgksw Year of Manufacture: 1997 X-axis Travel: 600 mm Y-axis Travel: 500 mm Z-axis Travel: 450 mm Clamping Area: 900 x 530 mm No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, Control: Multipulse 64 4 axes – including C-axis Working area: 600 x 500 x 340 mm Head travel: 400 x 300 x 300 mm Table load capacity: 500 kg 20-position electrode changer Erowa electrode clamping system Documentation. The machine is currently still in operation and was completely overhauled a few years ago. Codpfsyllaxox Agkjpw The machine's dielectric cooler is supplied by the central cooling system.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,727 h, functionality: fully functional, Near-new vertical machining center with under 3000 operating hours The machine was used in special-purpose machine manufacturing. 90% of the material processed was aluminum. CNC control Siemens 840D sl Travels: X/Y/Z 1000 x 500 x 500 mm Spindle speed max. 10000 rpm 24-position tool changer Coolant system Cjdpfx Ageyrnc Nekspw Accessories: Tool cabinet with tool holders and drill chucks 1 x hydraulic vise 1 x manual tool presetter Note: The machine does not have a chip conveyor or internal coolant supply.