Used Rock for sale (1,158)

Condition: used, functionality: fully functional, The Kramer dryer with 200 liters capacity is for sale Ksdpsxhgrysfx Aanofa

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Kedpfx Aev Si Szsansfa Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Power 650 Watt tank capacity 5,5 l length 515 mm width 430 mm height 825 mm weight of the machine ca. 36 Kg Kfodpeqd Rxhjfx Aansa Professional 650 watt construction dryer Recommended room size 40 - 50 m², height max. 2.6 m Sound pressure level approx. 52dB Dehumidification capacity 28 L/D - 51 L/D

Condition: new, Year of construction: 2025, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our innovative drying systems are available in longitudinal and transversal version and can be combined with all our painting machines. We can also add IR-stripes for faster drying apart from the hot air drying (heated by hot water). Kfjdpfoffc Ufjx Aanoa You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. The machines will be configured and build according to the wishes of You. Delivery time on request. Do You have further questions? Please feel free to contact us whenever You want!

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar Kfsdpfx Ajh A Sfdjanea liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Year of construction: 2024, condition: new, Pasteurizer-Filler Rocket is used for the pasteurization of juice and other liquid products and filling it to bottles or Bag in Box packaging. The machine has a built-in heating boiler. Inside of it there is a tubular heating spiral made from stainless steel. The liquid comes into the tubular spiral which is surrounded by hot water. The heat from the water heats up the liquid and eliminates the bacteria. If the boiler temperature rises more than set, an automatic temperature sensor turns off the heaters. Juice temperature is monitored manually. Capacity: 150 – 200 l/h Maximum heating temperature – 90 ºC. -A tubular spiral made of hygienic thin-walled stainless steel. -Spiral is integrated into the boiler which provides saving of space and prevention of heat loss when pumping the water into external heat exchanger. This saves the heating energy up to 15-20%. -Pasteurizer has an automatic water temperature control with a digital thermostat. -Safety sensors for dry run protection. Pasteurizer does not start until the water level is correct. -Easily interchangeable filling heads to Bag in Box or bottle. -Bag in Box filling table with scales for weight monitoring. -Bag in Box closing handle is moved by a spring – this ease the opening and closing process. -Automatic bottle filling – filling will stop when bottle is full. Kjdpfx Aoq Nlz Toansfa -Bottle filling table is adjustable according to bottle dimensions. -Manual juice temperature monitoring by digital thermometer. -Fast and easy cleaning.

Condition: ready for operation (used), The device is used from a catering facility! Kfjdpfx Aou Trctjanoa We also sell various other catering equipment.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Electric press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new Kfjdpjrp Dp Tofx Aanoa - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Rack trolleys, paint drying trolleys, shelf transport trolleys, transport trolleys, shelf trolleys, support arm trolleys Kfsdpfx Aajr Ngp Aonsa -Trolley: Paint drying trolley, heavy-duty version with 15 levels -Total length: 1660 mm -Total depth: 700 mm -Total height: 2040 mm -Number: 1x transport trolley available -Weight: 93 kg

Condition: new, Year of construction: 2025, functionality: fully functional, space requirement width: 3,200 mm, space requirement length: 1,200 mm, space requirement height: 2,100 mm, overall weight: 170 kg, total width: 3,200 mm, total length: 1,700 mm, inner dimension width: 1,500 mm, HEAVY DUTY Drying Trolley / Cantilever Trolley – Designed for the Toughest Demands Key Facts at a Glance: 1. Ball bearing sliding rail for width adjustment from 1.70 to 3.00 m span 2. Space-saving, nestable design 3. High intermediate clearance of 135 mm for easy loading even at fast work cycles 4. Upright square tube support for a minimal contact area 5. Generous usable depth of 1,000 mm 6. High load capacity of 1,000 kg 7. Premium-quality casters for effortless movement, even when loaded Genuine high quality – made in Denmark. The trolleys are generally available directly from stock. To reduce shipping costs for our customers, we deliver the trolleys pre-assembled (see picture). Final setup is very quick and easy. Kfjdefiuhvspfx Aansa Do you have any questions? Contact us – we are happy to assist!

Condition: good (used), Year of construction: 2023, functionality: fully functional, space requirement height: 4,200 mm, power: 3 kW (4.08 HP), Equipment: documentation/manual, Automatic Rotary Dryer C2M RED – 11 m³ – Year of manufacture: approx. 2022/2023 – Very good condition For sale are three automatic rotary dryers, model C2M RED, each with a volume of 11 m³, including conveyor systems for infeed and discharge as well as a central control system. The units have only been in seasonal use for a few cycles and are in excellent technical and visual condition. Technical data (per dryer): • Drying volume: 11 m³ Kfjdpfxsw Hynus Aanea • Throughput: approx. 11 m³ dried fruit per day • Diameter: 2.30 m • Height: 3.80 m to 4.20 m • Fan output: 2.2 kW • Motor (screw conveyor) + burner: 0.55 kW • Burner output: 40 kW Energy consumption: approx. 20–35 kg gas per m³ dried product Special features: • Fully automatic three-stage drying process (preset, adjustable depending on product) • Automatic shut-off upon reaching target moisture level • Uniform drying thanks to continuous mixing via screw conveyor drive • Prevents moisture pockets or overdrying • Display of drying level, gas consumption, and operating time • Central control unit to operate up to 10 dryers simultaneously Included accessories: • Conveyor belts and elevators for filling and emptying (conveyor belt/unit: €4,000) • Central control system • Support frames, mounting parts • Documentation available Suitable for: Walnuts, hazelnuts, almonds, apricot kernels, chestnuts, and other suitable products for drying. Location: Austria Availability: Immediately Price: Drying chamber (of three available): €15,000 each; conveyor belt per unit: €4,000 If you have any questions, require further technical details, or would like to arrange a viewing, please feel free to contact us.

Year of construction: 2000, condition: good (used), functionality: fully functional, The system is suitable for the accelerated drying of painted components, which are transported through the dryer on trolleys with a chain conveyor. The dryer has a total length of approx. 20m and is equipped with a high-speed door on both sides. Maximum component length is approx. 5m. The heating medium is hot water 90°/70°C. The plant can currently still be viewed in operation. Kodpfx Aasvi Hdvjnefa

Year of construction: 2021, condition: new, Low-priced quality hardness tester for the Rockwell C , B , A methods Analogue dial indicator, manual operation, weight loading system, conform to ISO6506, warranty 2 years Rockwell scales: A, B, C, D, E, F, G, H, K, L, M, P, R, S, V Ksdpfx Aaebt Drpsnefa Test loads: preload 10kgf, main loads 60 | 100 | 150 kgf adjustable hydraulic damping of the weight loading system Adjustable dial indicator, graduation 0.5 HR - Readability 0.1 HR Units Throat 150 mm Test chamber height 240 mm Standard-compliant Rockwell tests according to EN-ISO 6508, ASTM E-18 Machine weight (net) 126 kg Machine dimensions height 765 mm / width 270 mm / depth 555 mm

Condition: new, Machine type: rotary dryer Manufacturer: Eurotec Innovation GmbH Model: RT27 Year of construction: 2021 - new machine Gross volume: approx. 270 liters Usable volume: approx. 140 liters Drive power: approx. 1.6 kW Heating capacity: max. 4 kW Supply line: 400V - 16A - 50Hz APPLICATION AREAS: - Component drying directly after the mass finishing process - Polishing of components Kedpfx Aaof Sqfbjnsfa - Reduction of stains - Fine machining of particularly difficult contours - Prevention of flash rust through completely dry surfaces - Efficient drying of complex geometries ----- Please just contact us, we will be happy to advise you without obligation. Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, message portal), where we first make you a non-binding offer in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Condition: used, Rack trolleys, paint drying trolleys, shelf transport trolleys, transport trolleys, shelf trolleys, support arm trolleys -Trolley: Paint drying trolley, heavy-duty version with 11 levels -Total length: 1200 mm -Total depth: 580 mm -Total height: 1955 mm -Weight: 56 kg Kfodpfx Ajtr R Dfoanea

Condition: used, Year of construction: 1970, functionality: unexamined, NIRO Agglomerator consists of Spray Tower, Fluidbed, Disc Atomizer, Allgaier Sifter, Ventilators, Cyclones ect. Kedpfx Aaov Hcmzjnjfa Plant has been used for production of instant milk/cacao/coffee powders for shakes by spraying liquid product into a parallel separate inblown powder vicinity to build up agglomerated particles. Final drying/cooling is performed in a vibrated fluid bed. Equipment provides options for various food applications that require continuous combination of drying and agglomerating of liquid products and powder products in a combined process.

Condition: used, mileage: 97,405 km, power: 184 kW (250.17 HP), first registration: 01/2015, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 7,545 kg, empty load weight: 10,455 kg, tire size: 295/80R22.5, wheelbase: 3,575 mm, brakes: constant throttle, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, 1x comfort seat, electric mirror, heated mirror, left electric window, right electric window, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, differential lock, fog lights, rotating beacon, storage box, underbody protection, sweeping broom, roof hatch, green environmental sticker Wheelbase: 3575 mm Body: Brock SL200/2 sweeper body, approx. 7 m³ with double disc brush, 1600 l water tank, 2-stage coarse pick-up, leaf vacuum system. Engine D0836LFL66 - 250 HP / 184 KW EURO6 SCR - 1000 NM C-R HCI, ZF 9S-1110 DD transmission, 100 l plastic fuel tank temporarily attached and 10 l AdBlue, MAN BrakeMatic (electronic braking system), cab 'C' 2240mm wide, 1620mm long Kjdpov N Hg Rjfx Aansfa Approx. 7128 operating hours! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! - .

Condition: new, Kaeser membrane dryer KMM 5 Volume flow with pressure dew point reduction +35 °C -> +3 °C 0.68 m³/min Volume flow with pressure dew point reduction +35 °C -> -20 °C 0.4 m³/min Volume flow with pressure dew point reduction +5 °C -> -20 °C 0.67 m³/min Purge air 0.1 m³/min Compressed air connection R ¾ Min. overpressure 4 bar Max. Overpressure 14 bar Kfjdpfx Ajvkf Aajanja Compressed air inlet temperature min. +1° C Compressed air inlet temperature max. +66° C Width 133 mm Depth 133 mm Height 634 mm Mass 5.9 kg Purge air stop valve Yes Membrane fiber in helix structure Yes Outlet silencer Yes Membrane flow from inside to outside Yes From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, maximum load weight: 31,760 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,625 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, Vehicle information ? Loading space length: mm ? Height: 4000 mm ? Width: 2550 mm ? Loading space length (inside): 13625 mm ? Loading space height (inside): 2900 mm ? Loading space width (inside): 2480 mm ? Fifth wheel height: 950 mm ? Gross vehicle weight: 36000 kg ? Unladen weight: 7240 kg _____ Axles ? ROTOS SCB running system for 19.5" (disc brake) Kfsdpfoun Enasx Aansa ? 3 x SCB air spring type: MRH KX 30ME ? Starting aid (liftable front axle), actuation "3x brakes" ? 1st axle lift axle ? 3 x axle SCB 9 t, SP2040, FM1300, ET 120 disc brake 370 mm ? MEGA tires, fifth wheel height approx. 950 mm ? 6-fold 445/45R19.5 (14.00x19.5) ? chrome-plated caps for wheel nuts (3 axles) _____ Structure / attachments ? 4 x pair of continuous load securing rails, hole-slot galvanized, recessed into the sidewall (13400) ? en in the middle 1 anchor rail 400 mm ? en b.Mitte 2 anchor rail 1,000 mm ? en b.Mitte 3 anchor rail 1,800 mm ? en b.Mitte 4 anchor rail 2,450 mm ? Plywood panel 12mm on the front wall 1500mm high, ? ALU double-leaf doors _____ Floor ? 28mm panel floor, multi-axle load 7100 kg strength test according to DIN/EN283 ? 400mm wear plate on the last floor panel ? Base rubbing strip 300mm high on the side, 750 high at the front, galvanized steel ? 16 pairs of lashing eyes ? without vertical impact buffers _____ Lighting / Electrics ? LED interior lighting in full body length, right (DF) ? LED lighting system 24V with multi-chamber light and dynamic indicator ? continuous lamp holder color: white, low version ? 2 reversing lights separately

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressed air system consisting of: Atlas Copco Compressor GA15VSD+ Year 2016, approx. 13,000 hours – 15 kW – Max 13 BAR Kfodpowz Ul Djfx Aansa Atlas Copco Refrigeration Dryer FX8 Year 2020 MaBe 500L Tank Year 2011, height approx. 2.15 m Almig AKC300 Activated Carbon Adsorber incl. Condensate Drain Valve SPX Flow Technology EDDSU2 The system is fully functional and has been regularly maintained. Already dismantled and packed on a pallet. Very good condition, see pictures. Forklift available for loading. Collection only by appointment in 75053 Gondelsheim. Shipping by freight forwarder possible, please inquire with postcode.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 09/2023, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, Equipment: ABS, * BPW Axles * Lift axle * Double-decker beams * Portal doors * 13.6 x 2.47 x 2.7 * Empty weight 7160 kg Kfedpfx Aasilbuqonoa As viewed or offered, without further services / accessories. Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply. We support you with export, preparation of export documents, procurement of license plates, supplier's declaration, etc.! The information given in advertisements, on the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed characteristics. The seller accepts no liability/warranty for typing and data transmission errors. Listed equipment must be checked separately if necessary. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 004, 2 Vacuum Pressdryers QUATTRO with Automatic Stacking and Remote Control. Lumber and Platens are combined transported 2 Vacuum Pressdryers SIGMA 9 QUATTRO with automatic stacking Lumber content 72 m³ (30 mbf) comparable to 210 m³ (90 mbf) vacuum dryers with fans or to 800 m³ (340 mbf) conventional dryers but more economical, without contamination of the atmosphere and Kodpfxev S U Tqe Aanjfa with Super drying-quality!

Condition: excellent (used), mileage: 49,000 km, power: 213 kW (289.60 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2019, Equipment: air conditioning, = Additional options and accessories = - Air suspension - Reversing camera - Sunshade = Additional information = Front axle: Steered GVW: 18,000 kg Kedpfx Aasv Unrfonsfa Technical condition: very good Visual condition: very good

Condition: excellent (used), Part suitable for: cars Kfjdpfow Rl Hisx Aansa Technical condition: very good Optical condition: very good

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Kfjdev Snn Iopfx Aanoa Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Incl. oil-water separator System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.