Used Rotary Screw Air Compressor for sale (33,459)

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Nedpfeg A Hcmox Aiyeda

Condition: new, Year of construction: 2025, Viber-Air Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 800 l/min. Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Nsdjxdbvrepfx Aiyoda Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Weight: 390 kg Suction capacity: 950 l/min Discharge capacity: 800 l/min

Condition: new, Year of construction: 2026, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Suction capacity: 1800 l/min Discharge capacity: 1500 l/min Nsdpfxoxdbubs Aiyjda

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Description: Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. Nodpfxezt Srie Aiyoda The system has been operated very little and is in very good, like-new condition, both visually and technically. Technical data of the compressor: * Manufacturer: Hertz Kompressoren * Model: HBD 7 * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled * Serial number: see nameplate Refrigerated dryer: * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz * Refrigerant: R134a The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Nodozmub Topfx Aiyoda

Condition: ready for operation (used), Offered are two identical, belt-driven, sound-insulated Alup screw compressors. Power: 7.5kW, operating pressure: 10bar, capacity: 1m³/min, weight: approx. 215kg. An on-site inspection is possible. Ndjdpfx Aisztrb Doyea

Condition: good (used), Year of construction: 2017, FOR SALE: Complete Industrial Compressed Air System / Unit – KAESER For sale, a complete, high-performance compressed air system from the KAESER brand, ideal for workshops, factories, or demanding industrial applications. High-quality German equipment, reliable, and well-maintained. DETAILS OF THE EQUIPMENT (3 MAIN UNITS): 1. Screw compressor with variable speed drive – KAESER CSDX 165 SFC Brand / Model: Kaeser CSDX 165 SFC (Sigma Profile) Year of manufacture: 2017 Rated power: 90.0 kW Maximum operating pressure: 8.5 bar Motor speed: 2980 rpm Njdpfszqtdzex Aiyjda Series / Article number: 3111 / CSDX.4 Specific feature: Equipped with a variable speed drive (SFC) for optimized energy consumption management based on air demand. 2. Refrigerant air dryer – KAESER TF 280 Brand / Model: Kaeser TF 280 Year of manufacture: 06 / 2017 Maximum operating pressure: 16.0 bar Electrical supply: 400V / 3 Ph / 50Hz (Rated current: 9.6 A) Refrigerant: R-134a (2.60 kg) Serial number: 1631 / Material: 1.2482.0 3. Fixed-speed screw compressor – KAESER CSD 102 T Brand / Model: Kaeser CSD 102 T Integrated equipment: Integrated air dryer module (T version) and SIGMA CONTROL electronic control. Usage: Ideal as a main compressor or as a backup to ensure a secure air supply. ADDITIONAL INFORMATION Overall condition: Good visual and functional condition, always maintained in a production setting. Availability: Immediate. Terms: Collection on-site, the responsibility of the buyer (suitable handling equipment should be provided).

Condition: excellent (used), Year of construction: 2013, operating hours: 58,270 h, functionality: fully functional, Oil-free screw compressor, Atlas Copco ZR90VSD Inverter integrated 90 kW 9 bar 15.50 m3/min Year of manufacture: 2013 Ndjdpfxszmwc Hs Aiysa Operating hours: 58,270

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 3 Aerzen VM 30 screw compressors Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volume flow: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell and tube heat exchanger. Year of manufacture: 1998 Nodpfx Asrkpp Hsiysda Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular maintenance was carried out by a qualified service company!! Not operated since 2019. Have been stored in a dry and heated location since then.

Condition: used, Year of construction: 2017, power: 55 kW (74.78 HP), pressure (max.): 8.5 bar, ambient temperature (min.): -10 °C, ambient temperature (max.): 45 °C, We offer this used Kaeser CSD 105 screw compressor, manufactured in 2017. Compressor type: CSD 105 Material number: CSD.4C Serial number: 1328 Year of manufacture: 2017 Rated power: 55.0 kW Motor speed: 2975 rpm Maximum working pressure: 8.5 bar Ambient temperature range: -10°C to 45°C Option: K1 C3 11,000 operating hours Ndsdpfx Aiszrgmxoyja If you have any further questions or require more information, please send us a message or call us. We also have used BS51 and BS61 compressors, a TD61 dryer, and a 2000L pressure vessel in stock. Prices are negotiable. You can also purchase a complete set of machines at a favorable price. The machines are used and do not come with a warranty.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, For sale: AERZEN D62H rotary lobe compressor, manufactured in 2020. Technical data Manufacturer: AERZEN / Aerzener Maschinenfabrik GmbH Type: D62H Machine: Rotary Lobe Compressor / Drehkolbenverdichter Year of manufacture: 2020 Nominal motor power: 160 kW Max. suction pressure (abs.): 1.013 bar Max. discharge pressure (abs.): 2.513 bar Max. differential pressure: approx. 1.5 bar / 1500 mbar Unit weight: 2,790 kg Serial number: 4084095 Customer order no.: 223922 Nodpozucpnsfx Aiyjda Industrial AERZEN compressor suitable for applications requiring high air volume at low pressure. The machine is equipped with the original manufacturer's nameplate. More information, additional photos and price available on request. Worldwide delivery can be arranged. Please contact us for further information.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: AII362754, power: 37 kW (50.31 HP), operating pressure: 7 bar, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA37 oil-lubricated compressor is a powerful and reliable machine designed to deliver optimal performance in various industrial environments. This used model, with a power rating of 37 kW, can operate at a pressure of 7.5 bar, making it ideal for applications requiring constant pressure and energy efficiency. Manufactured by Atlas Copco, a leader in the compressed air solutions industry, the GA37 is known for its durability and robust design. Thanks to its advanced technology, it ensures quiet operation while guaranteeing the production of high-quality compressed air. Perfect for companies looking to improve their productivity while minimizing operating costs, this compressor is a wise choice for various industrial sectors. Ndodpfxjzpxnvo Aiyea Overall, the Atlas Copco GA37 compressor combines performance and reliability, while also offering excellent value for money for a used unit. It is a smart choice for those seeking a proven and efficient solution in the field of oil-lubricated compressors.

Condition: new, Year of construction: 2022, Compact screw compressor,new original packed Displacement (2900rpm/50hz) 410m3/h Motor input: 110KW Max.operating current: 182a Nodpfx Ajztz Adjiyjda 380-425V/3/50hz Star connection for R134a: Kältemittel R134a Evaporating temp. to +5 °C → po = 3,50 bar (abs.) Condensing temp. tc +50 °C → pc = 13,18 bar (abs.) Cooling cap. = 232 KW (68 refr.tons)

Condition: excellent (used), Year of construction: 2001, PROD. ATLAS COPCO TYPE GA180VSD S/N AIF072891 YEAR 2001 POWER (kW) 181 OUTPUT (m3/min) PRESSURE (bar) 12.50 HOURS (RUNNING/TOTAL) 85719 VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK no DOCUMENTS no CONNECTION 2 1/2 Ndsdpozq An Nofx Aiyea NEW/USED USED

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE BSD83 S/N 1036 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.16 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 41872/62783 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Ndodpfjzq Aluox Aiyoa CONNECTION 1 1/2' NEW/USED USED

Condition: excellent (used), Year of construction: 2001, PROD. ATLASCOPCO TYPE GA160 S/N AIF072890 YEAR 2001 POWER (kW) 167 Nsdpfxjzq Afuj Aiyjda CAPACITY (m3/min) 21 PRESSURE (bar) 8.5 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 3 NEW/USED USED

Condition: used, Year of construction: 1984, operating hours: 29,950 h, functionality: unexamined, machine/vehicle number: 6051, Used BOGE screw compressor, model VEX 40D11, from industrial stock. Robust, proven technology with documented operating hours, control system, and cooling. Suitable for workshops, backup operation, or further use. Technical data: - Power: 30 kW - Volumetric flow rate: approx. 4.0 m³/min - Maximum pressure: 10 bar - Speed: 4,360 rpm - Connection: 380/400 V, three-phase - Current operating hour counter: 12,622.7 h - Documented previous counter reading: 17,326.4 h - Documented total hours: approx. 29,950 h - Base load/idle control via pressure switch FF142 - Switching range: 8.5–9.5 bar - WILO industrial circulation pump Nsdpfx Aszrn Aheiysda Condition: used and commensurate with its age. In operation until dismantling; no functional test currently performed, therefore functionality is unverified. Sold as is, as viewed, or according to the photos. Location: 65618 Selters (Taunus), Germany.

Condition: refurbished (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 002332192500000472, overall weight: 211 kg, total length: 1,320 mm, total width: 850 mm, total height: 1,720 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 63 m³/h, pressure (max.): 10 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Following transport damage, completely refurbished with a new screw unit! Coaxial screw compressor with maintenance-free drive and maximum energy efficiency across all pressure ranges. The low compressor speed and the reduced load on the bearings of the patented direct drive enable very long service lives. Electronic EasyTRONIC Micro II control for reliability and efficiency. Prevents motor overload, reduces wear, and extends service life. Monitors operating hours, temperature, and motor overload. Controls the direction of rotation of the motor via a phase sequence relay, thereby preventing potential damage during commissioning or after relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously sized heat exchangers result in a longer service life and reduced fluctuations in oil temperature. User-friendly in every detail. Low noise, suitable for installation in any working environment. Small external dimensions, making transport and installation easy. Service-friendly due to optimal accessibility and easy disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Standard with star-delta circuit. Ready for connection with all fittings. Integrated desiccant dryer. Higher reliability of the compressed air system without costly downtime and production delays, while simultaneously ensuring product quality. Ready for use without any installation effort. Ndodpfxjzrnc Ij Aiyja

Condition: new, performance: 780 l/min main engine power: 5.5 kW tank capacity: 500 l maximum operating pressure: 10.0 atm integrated refrigerant dryer electronic adjustment of compressor operating parameters Nodpfx Ajzpxv Tjiyoda complies with CE standards year of manufacture: 2025, NEW

Condition: new, performance: 984 l/min main engine power: 7.5 kW tank capacity: 500 l Ndodpfx Aiozpxuvsyoa maximum operating pressure: 10.0 atm integrated refrigerant dryer electronic adjustment of compressor operating parameters soundproofed cabin (only 67 dB) complies with CE standards manufactured in 2025, NEW

Condition: excellent (used), Year of construction: 2012, operating hours: 19,221 h, functionality: fully functional, Oil-free screw compressor ZT250FF Dryer integrated. Nedpezmdrbjfx Aiysda 250 kW 10 bar 42.31 m3/min Year of manufacture: 2012 Operating hours: 19,221

Condition: new, Year of construction: 2026, The THEOR 20 screw compressor with a refrigerated compressed air dryer. The CORMAK THEOR series screw compressor, manufactured by the Polish brand CORMAK, represents the latest solutions used in pneumatics combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and durable construction, and high efficiency guarantee effective and trouble-free operation. CORMAK screw compressors are synonymous with innovation and reliability, designed for the most demanding applications. Innovative design: Our compressors are based on advanced engineering and European precision manufacturing. The robust construction, enhanced with modern components, ensures long-lasting and reliable operation in all conditions. Integrated refrigerated dryer: The COMPACT version with an integrated dryer saves space and provides a complete all-in-one solution. The built-in refrigerated dryer ensures dry and clean air, protecting your installation from corrosion and damage. Quiet operation and comfort: Designed with attention to detail, our compressors feature exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, improving operator concentration and well-being. Intelligent control: The intuitive MAM series electronic control panel serves as the command center of your compressor. It enables precise parameter monitoring, maintenance scheduling, and quick diagnostics, ensuring stability and protection of key components. Ndsdpjy Rpmnofx Aiyja Adaptation to your needs: We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing perfect adaptation to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly as much compressed air as needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable development: We focus on environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your operating costs but also minimize environmental impact, while the heat recovery option allows maximum energy utilization. Technical Specifications Parameter Value Motor power 15 kW Voltage 400V / 50Hz Capacity at 0–6 bar 2100 L/min Capacity at 6 bar 2000 L/min Capacity at 8 bar 1700 L/min Capacity at 10 bar 1600 L/min Outlet connection diameter (G) G1" Dimensions 1550 × 740 × 1180 mm Weight 500 kg

Condition: new, Year of construction: 2026, The LUFT screw compressor is the latest solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease to use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Technical parameters Engine power 5.5 kW Voltage 400V/50Hz Efficiency 0-6 bar 690 L/min Efficiency at 6 bar 650 L/min Capacity at 8 bar 650 L/min Capacity at 10 bar 630 L/min Outlet port diameter (G) 1/2" Dimensions 810 x 610 x 850 mm Weight 120 kg Ndedpfxomqlguj Aiyoa Manufacturer: Cormak

Condition: new, Year of construction: 2026, CORMAK THEOR H1515.8 COMPACT Screw Compressor with Integrated Air Dryer The CORMAK THEOR H1515.8 COMPACT screw compressor with an integrated air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. CORMAK THEOR H1515.8 COMPACT High-Pressure Compressor – Ideal for Fiber Laser Cutting Machines Are you looking for a professional and compact solution to power your fiber laser cutting machine? The CORMAK THEOR H1515.8 COMPACT screw compressor is an excellent choice, designed specifically for precision laser cutting applications. With a 15 kW motor and an actual output of up to 1,700 l/min, it provides a stable and reliable supply of compressed air – essential for the efficient operation of laser cutting systems. The THEOR H1515.8 COMPACT screw compressor reaches a maximum operating pressure of 15.8 bar, enabling effective cutting of a wide range of materials. The intuitive MAM electronic control panel provides full control over the machine's operation, allowing easy monitoring and adjustment of operating parameters. Key Parameters ✅ Pressure: up to 15.8 bar ✅ Air output: up to 1,700 l/min ✅ Motor power: 15 kW Technical Specifications Parameter Specification Motor power 15 kW Voltage 400 V / 50 Hz Output at 0–6 bar 1,700 l/min Output at 6 bar 1,650 l/min Output at 8 bar 1,500 l/min Ndjdpfxsmrmy Aj Aiyja Output at 10 bar 1,500 l/min Output at 12 bar 1,350 l/min Output at 14 bar 1,350 l/min Outlet connection 3/4" Dimensions 1550 × 750 × 1200 mm Weight 500 kg

Condition: new, Year of construction: 2026, THEOR H1520 COMPACT Screw Compressor with Integrated Air Dryer The THEOR H1520 COMPACT screw compressor with integrated air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and reliable operation. With many years of experience in the market and extensive expertise in the distribution of piston and screw compressors, we provide our customers with proven and trusted pneumatic solutions as a European manufacturer. CORMAK THEOR H1520 COMPACT High-Pressure Compressor – Ideal for Fiber Laser Cutting Machines Are you looking for a professional and compact solution to power your fiber laser cutting machine? The CORMAK THEOR H1520 COMPACT screw compressor is an excellent choice, designed specifically to support precision laser cutting applications. With a 15 kW motor and an actual output of up to 1,350 l/min, it provides a stable and reliable supply of compressed air – essential for the efficient operation of laser cutting systems. The THEOR H1520 COMPACT screw compressor reaches a maximum operating pressure of 20 bar, enabling effective cutting of a wide range of materials. The intuitive MAM electronic control panel provides full control over the machine's operation, allowing easy monitoring and adjustment of operating parameters. Key Parameters ✅ Pressure: up to 20 bar ✅ Air output: up to 1,350 l/min ✅ Motor power: 15 kW Ndsdomrmx Topfx Aiyoa Technical Specifications Parameter Specification Motor power 15 kW Voltage 400 V / 50 Hz Output at 0–6 bar 1,350 l/min Output at 6 bar 1,350 l/min Output at 8 bar 1,250 l/min Output at 10 bar 1,250 l/min Output at 12 bar 1,150 l/min Output at 14 bar 1,150 l/min Output at 16 bar 1,050 l/min Output at 18 bar 930 l/min Output at 20 bar 930 l/min Outlet connection 3/4" Dimensions 1550 × 750 × 1200 mm Weight 500 kg