Used Rotary Table Position for sale (24,696)

Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer! Tedsuiafuepfx Airjd

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° Tedpfx Aju N D Sbeirjd height over floor: 1020 mm total power requirement: ca. 1,0 kw weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t table height 100 mm weight 126 kg Tsdsipyx Njpfx Airod Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: used, Year of construction: 2000, table diameter 800 mm table load 1100 Kg swivelling range 360 Grad connected load frequency 400 V weight 3,5 t Dimensions (LxWxH) 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 Tsdpfjzzd Uxox Airjd - System without control cabinet

Condition: used, table diameter 315 mm workpiece weight 50 kg centre height mm weight of the machine ca. 60 Kg dimensions of the machine ca. 0,4 x 0,4 x 0,2 m vertical rotary table, Tjdpfxst Dqu Ds Airjd Height from assembly space to centre of disk = 500 mm

Condition: new, table diameter 650 mm table load 600 Kg swivelling range 90 Grad turning speeds 0,2 - 3,0 U/min total power requirement 0,55 + 0,4 kW weight of the machine ca. 0,28 t Tjdpfx Asulbgaoirod Welding rotary tilting table - Remote control - 2 x welding current transmission

Year of construction: 2002, condition: good (used), machine/vehicle number: 8280, Offer 21463 Technical data: - Max. load capacity 10000 kg - Turntable dimensions 1400 x 1400 mm - Turntable hydraulically swivelable 0 - 90 / 135 ° - Rotation speed continuously adjustable 0.05 - 1.2 rpm - Clockwise and counterclockwise rotation controllable - Welding current transmission approx. 500 A - Power supply 400 V - Table height in horizontal position approx. 2500 mm - Electric remote control - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg Tjdshfwnqopfx Aired

Condition: used, Year of construction: 1985, functionality: unexamined, Rotary and sliding table | Brand: SKODA | Type: SEA40P Year of manufacturing: 1985 The table can be inspected by prior arrangement. TECHNICAL SPECIFICATIONS: - Control: variable - Measurement systems: Heidenhain - Axis drives: Siemens - Maximum table load: 40 tons - Table clamping area: 2.400 x 2.400 mm - Total height of the rotary table: 1.210 mm - Table stroke (W-axis): 2.500 mm - Inner circular guide: * Centre diameter: 1.210 mm * Guide width: 250 mm - Outer circular guide: * Centre diameter: 2.200 mm * Guide width: 165 mm - Feed rates, infinitely variable: * Longitudinal feed – range: 0,5 – 2.000 mm/rpm * Rapid traverse: 10,000 mm/rpm * Rotational feed – range: 0,5 – 2.000 mm/rpm * Rapid traverse: 10.000 mm/rpm - Rotational feeds, relative to the diameter: 1.600 mm - Motor torque (speed): 170/300 Nm/rev - Total power requirement: 120 kVA - Table weight approx.: 28 tons - Dimensions L/W/H: 7,3 x 3,5 x 1,21 m Tedpozgu Uaefx Airod ACCESSORIES/EQUIPMENT: - Control cabinet for the table positioners, power electronics, positioners (without control) - Documentation No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale.

Condition: new, table diameter 340 mm table load 290 horizontal kg Tjdpfxjxaafqo Airod table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. Tedsxabm Nspfx Airod - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise Todpfx Asxaatnsirsd - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, Year of construction: 2026, Equipment: rotational speed infinitely variable, - Horizontal load capacity: 1000 kg Tedpfxozd D Dxo Airsd - Vertical load capacity: 1000 kg - Hydraulic - Table diameter: 1000 mm - Wired remote control - Digital display - 2x Emergency stop - Documentation - 400V

Year of construction: 2017, condition: excellent (used), 100 kg load capacity, rotating welding table Speed range from 0.12 to 1.2 RPM Plate diameter 400 mm Tilt angle infinitely adjustable Tjdpfxsdt Rhae Airsd Includes foot-operated remote control

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Tedsxcilropfx Airsd

Condition: new, RT200-02-320-RH-20-4, RT200, Taktomat drum curve rotary table with motor Todpfxjrazk Rj Aired Model: RT200-02-320-RH-20-4 Type: RT200 Condition: New

Condition: used, Year of construction: 1982, Technical details: table length: 2200 mm table width: 2500 mm table load: 16 t Todjvb A Uujpfx Airod total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: good (used), Horizontal-vertical rotary table with direct indexing, “MECA” design Table diameter: 320 mm Mounting: MK 3 Tjdpfx Aszyyx Rsirjd Center height: 250 mm Table height, horizontal: 140 mm Weight, rotary table: approx. 70 kg Weight, tailstock: approx. 20 kg Accessories / Special features: • Horizontal and vertical • Indexing possible via scale drum and additionally via 24-step direct indexing 15° • Swivelable dividing worm for fast rotation • Tailstock Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D – 44143 Dortmund - Wambel / Germany

Condition: new, table diameter 350 mm table load 100 Kg Tedpjupw Nxjfx Airsd swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,055 t dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Condition: used, table length 1500 mm table width 1500 mm table load 10 t Todpfxjyuqf Eo Aired voltage 380 V Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm

Condition: used, rotary table 400mm Todpfxsvpvh Rs Airod

Condition: good (used), Year of construction: 1972, Length: 16500mm Width: 2100mm Height: 2100mm Tjdpfx Aewry Iljirjd Weight: 0kg

Condition: as good as new (ex-display), Very practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Max. load: 100 kg horizontally. Max. load: 50 kg vertically. Rotation speed: 1 to approx. 7 RPM. Rotation direction: left and right. Table speed: manually adjustable. Table diameter: 345 mm. Table height: 415 mm. Table tilt angle: 0-90°. Todj Ugnbspfx Airsd Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power: AC 110V / 220V 50/60Hz. Optional: with chuck/quick-release chuck, surcharge of 180 €. Delivery to your door: 90 €.

Condition: as good as new (ex-display), 3000 kg welding rotator, hydraulically adjustable in height Speed: 0.05 to 0.6 revolutions per minute Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with the disk in a vertical position, measured to the center: Tedodvn E Uopfx Airjd 960 mm ~ 1910 mm Dimensions with the disk in a horizontal position: 1200 mm to 1900 mm

Condition: ready for operation (used), Horizontal rotary table, manually operated Bore diameter: 145 mm Including 3 inwardly stepped jaws Space required: 500 x 500 x 300 mm Todpfxewx H Irj Aired

Condition: good (used), Extremely practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Todocctnajpfx Aired Maximum load: 100 kg horizontally. Maximum load: 50 kg vertically. Rotation speed: 0.5-9 rpm. Rotation direction: left and right. Rotary table speed: manually adjustable. Rotary table diameter: 345 mm. Rotary table height: 415 mm. Rotary table tilt angle: 0-90°. Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power supply: AC 110V / 220V 50/60Hz. Optional with jaws, additional cost: 160. Delivery to your doorstep: 80.