Used Rotary Veneer Lathe for sale (9,729)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 508 mm, turning diameter: 330 mm, spindle speed (max.): 3,400 rpm, center width: 610 mm, TECHNICAL DETAILS Swing diameter: 330 mm Turning length: 508 mm Swing diameter over bed: 585 mm Swing diameter over cross slide: 241 mm Spindle speed: 3,400 rpm Bar diameter: 63 mm Distance between centers: 610 mm Travel in X-axis: 214.6 mm Travel in Z-axis: 508 mm Tool holder: VDI 40 MACHINE DETAILS Total power requirement: 15 kW Dimensions & Weight Cede Ah H Itopfx Aizjri Dimensions: 2,800 × 1,800 × 1,800 mm Machine weight: approx. 4,100 kg EQUIPMENT Bar feeder Servo Bar 300, 1.5 m 3-jaw chuck Collet chuck Tailstock Various tool holders

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 01360000541, turning length: 600 mm, turning diameter: 320 mm, spindle bore: 87 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,300 mm, total length: 4,000 mm, total width: 2,000 mm, quill diameter: 120 mm, quill stroke: 150 mm, overall weight: 5,000 kg, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT 4290, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 44 kVA, tailstock quill stroke: 580 mm, operating hours of spindle: 22,794 h, GILDEMEISTER CTX 400 C CNC turning machine - Swing diameter: 505 mm - Swing diameter over X-axis: 365 mm - Bar capacity: max. 65/75 mm - Spindle diameter in the front bearing: 130 mm - Chuck diameter: 200/250 mm - Drive power: 21 kW - incl. C-axis - Speed: 200 rpm - Positioning accuracy: 0.04° - Ball screw X/Z: 32 x 10 mm - Feed force X/Z: 4/6 kN - incl. 12-position tool changer Cjdpfx Ais Afutdozeri - Number of driven tool stations: all 12 - Shank diameter: VDI 30 - Tool disk, axial tool mounting: pitch diameter: 340 mm - incl. tailstock, tailstock travel: 580 mm - Center height: MK 4 - incl. additional driven VDI 30 tool holders – compatible with the machine - with chip conveyor and documentation The machine is equipped with a tailstock, a 3-jaw chuck, diameter: 200 mm, and a 12-position tool turret, VDI 30. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: used, PPM Rotary Lobe Pump Model LH84L - 4981 PU Crjdpez E Iawjfx Aizoi Ratio - 2.9451 : 1 RPM - 500 Sanitary lobe pump Port size - 90mm flange

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 10,000 rpm, bar passage: 20 mm, travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, Equipment: bar feeder, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Codpfx Aj Ahgkljizeri Bar diameter: 20 mm Linear axes: 6 Travel range X1 axis: 58 mm Travel range Y1 axis: 534 mm Rapid traverse speed: max. 30 m/min Spindle speed: 100–10,000 rpm Spindle motor power: 3.7–5.5 kW Speed of driven tools: max. 10,000 rpm Tool positions: 10–14 MACHINE DETAILS Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Connected load: 13 kVA Rated current: 19 A Fuse rating: 32 A Control voltage: 115/230 V Direct current: 24 V DC Dimensions & Weight Machine dimensions: 2,400 × 2,060 × 1,370 mm Machine weight: approx. 3,000 kg EQUIPMENT ROBObar SBF-532 bar feeder

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1492, turning length: 620 mm, turning diameter: 240 mm, spindle speed (max.): 4,200 rpm, controller model: Okuma OSP5000L, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Upper turret: 10 stations Lower turret: 8 stations Chuck: 250 mm / 10" Spindle nose: A2-6 Codo Afxvvopfx Aizeri Spindle bore: 62–80 mm Max. turning diameter: 240 mm Swinging diameter over bed: 450 mm Swinging diameter over cross slide: 300 mm Max. turning length: 600–620 mm Spindle speed: up to 4200 rpm Main motor: 15–20 kW Rapid traverse X/U: approx. 12 m/min Rapid traverse Z/W: approx. 15 m/min MACHINE DETAILS Control: Okuma OSP5000L Voltage: 380 V Phases: 3 Frequency: 50 Hz Max. power consumption: 49 kVA Total current: 82 A Max. motor current: 106 A Short-circuit strength: 10 kA Weight: approx. 5,500 kg Dimensions: approx. 2940 × 1730 × 1830 mm EQUIPMENT Documentation/Manual

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: E 3907, turning length: 200 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,300 kg, type of input current: three-phase, controller model: Mitsubishi Meldas, counter spindle speed (max.): 8,000 rpm, Long-turning lathe with FMB bar feeder! TECHNICAL DETAILS Turning diameter over bed: 20 mm Spindle bore: 24 mm Turning length: 200 mm Spindle speed: 20–10,000 rpm C-axis resolution: 0.001° Counter spindle / pick-off station Pick-off diameter: 20 mm Turning length: 80/600 mm Spindle speed: 200–8,000 rpm C-axis resolution: 0.001° Rapid traverse rates X/Y/Z: 32 m/min MACHINE DETAILS Control system: Mitsubishi Meldas Collet size: F25 (145E) Cjdps Ah Du Hsfx Aizsri Guide bushing: Neukomm T223 (22.001) Swivel angle of the tool block: 90° Driven tool positions: 3 Number of axes: 5 + 2 C-axes Total power requirement: 2.2/3.7 kW Dimensions & Weight Footprint: approx. 2.4 × 1.1 × 1.8 m plus loading magazine Machine weight: approx. 2.3 t EQUIPMENT CNC control system FMB 3-26 loading magazine Swiveling tool block with driven tools for radial and tangential machining Guide bushing by Neukomm Documentation On-board tools

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 400 kg, workpiece length (max.): 1,524 mm, workpiece diameter (max.): 79 mm, For sale: HAAS Servo Bar 300 bar feeder for CNC lathes. This device is valued for its simple operation, reliability, and excellent compatibility with CNC lathes. It is ideally suited for serial production, significantly increasing work efficiency and reducing machine operating time. Technical specifications: Cedpfxe Ah Edye Aizeri Manufacturer: HAAS Model: Servo Bar 300 Maximum bar length: 1524 mm (60") Bar diameter range: 6–79 mm (0.25"–3.125") Bar magazine – for approx. 30 bars with a diameter of 25 mm (1") Control from the HAAS lathe control panel Servo drive ensuring precise material feeding. Included: - HAAS Servo Bar 300 bar feeder, - a set of positioning/guide bushings for the shafts, enabling quick changes in the diameter of the material being processed!! - accessories visible in the photos. Technical condition: functional The device can be viewed by appointment. Price: negotiable, the stated price is the net price, and I will issue a VAT invoice. Please feel free to contact me by phone or arrange an on-site visit.

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm Cedoz R Iq Uepfx Aizeri – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. Cjdpfx Ajq Igyvjizeri III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Year of construction: 2019, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 350 mm, travel distance Z-axis: 1,310 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, bed width: 350 mm, center height: 270 mm, rotational speed (max.): 1,500 rpm, rotational speed (min.): 20 rpm, spindle bore: 105 mm, machine/vehicle number: T0119010008, TURI SPANTEC RIC-TC 2160 CNC flatbed lathe Cedpfx Aio Afuq Nezjri - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Swing diameter over bed: 540 mm - Swing diameter over cross slide: 310 mm - Distance between centers: 1500 mm - Tailstock diameter: 75 mm - Tailstock travel: 170 mm - MT 5 The machine is equipped with a tailstock, a double Multifix tool holder, a three-jaw chuck, diameter: 250 mm, another three-jaw chuck with a diameter of: 315 mm, various tool holders and clamping jaws, as well as a chip conveyor and chip cart. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, machine/vehicle number: 150436, turning length: 1,000 mm, total length: 3,200 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 3,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, PINACHO ST-225 Lathe - Center height above bed: approx. 260 mm - Swing over bed: approx. 520 mm - Center height above carriage: 180 mm - Swing over carriage: approx. 360 mm The machine is equipped with a tailstock and an 8-position tool turret, tool holder: VDI 30, including a 3-jaw chuck, diameter: 200 mm Codpfxj Afup Se Aizsri FCA D-94227 Zwiesel - loaded onto a truck.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor). Cedpfx Aijyy U Shezeri

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine in working order; used, requires repair Technical specifications: Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum rotational speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Cutting fluid - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment: Tool magazine: 12 positions Material feeding system: loading station at the pallet magazine Palletizing system - 2 pallet magazine; pallet loading station; machine table - a total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Crodpozvnbxsfx Aizsi Operating manual - paper version in Polish and German, digital version in German Currently, the machine has been disassembled from the hall and is ready for loading into a container. Arranging for the container and the company that will load the machine into the container is the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 70 t, stroke length: 400 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, cylinder diameter: 70 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Total pressure: 70 t Working pressure: 2 kg/cm² Total stroke: 400 mm Number of working stations: 1 Number of levels: 1 Plate material: Mounted plate Number of cylinders: 6 Cylinder diameter: 70 mm Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 400 mm Heating type: Oil-heated Temperature: max. 120 °C MACHINE DETAILS Main motor power: 2.1 kW Crjdpfxs Af Hn Ho Aizsi Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,100 x 2,050 mm Unladen weight: 4,020 kg Number of transport packages: 1 EQUIPMENT Documentation Heating boiler CE marking CE certificate

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, bar passage: 42 mm, TECHNICAL DETAILS Travel range, X-axis: 200 mm Credpfx Aij Ah H Idezoi Travel range, Z-axis: 345 mm Spindle speed: 6,000 rpm Bar capacity: 42 mm MACHINE DETAILS Total power consumption: 22 kW Machine weight: approx. 5,000 kg

Condition: used, Year of construction: 2020, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 192821242, spindle bore: 63 mm, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, total length: 4,950 mm, total width: 5,500 mm, total height: 3,779 mm, workpiece weight (max.): 1,300 kg, type of input current: three-phase, spindle motor power: 35 W, overall weight: 18,000 kg, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, workpiece weight between centers: 1,300 g, spindle diameter: 70 mm, workpiece diameter between centers: 1,040 mm, distance between centers: 800 mm, workpiece length between centers: 820 mm, FOR SALE: 5-AXIS CNC AND 3D CMM MEASURING DEVICE 1. MACHINE: AXILE G8 (5-AXIS) • Model: January 2020 (Serial No: 192821242) • Condition: Operational in our Istanbul Tuzla factory. • Operating Hours: Only 11,000 hours. • Control Unit: Heidenhain TNC 640 (5-Axis Simultaneous) • Spindle: 20,000 RPM (Built-in Kessler) Csde Ahxq Iopfx Aizjri • Capacity: 670 x 820 x 600 mm / Table: Ø800 mm (1300 kg load) • Extras (Included in the Price): 37 HSK tool holders, Schunk vise, and aluminum riser (for clamping parts up to Ø1040 mm). • Price: 315,000 Euro NOTE: Our machine has been meticulously used in defense industry and precision mold-making projects. It can be inspected on-site. Delivery is EXW (Ex Works). Please call for details.

Condition: excellent (used), Year of construction: 2017, operating hours: 7,349 h, turning length: 800 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, spindle motor power: 25 W, overall weight: 8,800 kg, Year of construction: 2017 CNC controller: Fanuc FS31iB (MAPPS IVS) Capacity Turning length mm: 800 Max. turning diameter mm: ø 320 Bar work capacity mm: 65 Upper turret X-axis travel mm: 210 Y-axis travel mm: 110 Z-axis travel mm: 810 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Lower turret X-axis travel mm: 210 Z-axis travel mm: 810 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Creds Ah Iq Ropfx Aizei Main spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: 8" Manufacturer: KITAGAWA Counter spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: 8" Manufacturer: KITAGAWA Coolant system High-pressure bar: 10 Equipment Chip conveyor Mist collector Chuck foot switch (double) for main and counter spindle Program restart Synchronized tapping Paper band filter Automatic door Robot Automation interface Messenger V4 Working time hours Under power: 7349 Spindle 1: 1370 Rated power kVA: 94 Basic machine dimensions / weight Weight kg: 8800

Condition: good (used), Year of construction: 1965, Revolver lathe, manufactured by HESTIKA, type HR32, year of manufacture approximately 1965. Crjdevgbphspfx Aizsi Maximum spindle bore: 32 mm, with tool turret, collet chuck. Spindle speeds: 200-3200 rpm, with coolant system. Machine documentation available. Collet chuck, size 164E. In good condition, ready for immediate use.

Condition: ready for operation (used), Year of construction: 1980, Höfer H65S heating plate press Disassemblable design Heating power with energy-saving mode: 7.8 kW, normal: 15.6 kW Pressing area: 2500 x 1300 mm Operating pressure: max. 65 tons Crodpfe Ahyycex Aizei 4 cylinders Space requirement: 2890 x 1460 x 1650 mm Year of manufacture: 1980

Condition: used, total length: 3,500 mm, total width: 1,500 mm, total height: 1,800 mm, Year of manufacture: 2008 Colour: White Empty weight: 1.400 kg - Year: 2008 - CE marking present: Yes - Serial number: 0040108 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Total stroke [mm]: 500 - Number of work zones [pcs]: 1500 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 55 - Total pressure [Ton]: 30 Crjdpfx Aio Ahyp Eezsi - Voltage [V]: 400 - Current consumption [A]: 3.6 - Fuse [A]: 16 - Power [kW]: 75.0 - Transport dimensions: 3500mm x 1500mm x 1800mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1999, functionality: fully functional, turning length: 1,090 mm, turning diameter: 520 mm, spindle bore: 87 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 1,091 mm, spindle motor power: 18,500 W, total height: 2,030 mm, total length: 4,350 mm, total width: 1,850 mm, feed rate X-axis: 180 m/min, feed rate Z-axis: 20 m/min, overall weight: 6,000 kg, spindle nose: A2-8, Machine taken from production and in working order! Additional options & accessories: - Chip conveyor - C-axis - Measuring arm - Collet chuck including collets - 3-jaw chuck - Various drill chucks Weight & dimensions: 6,000 kg Cjdo Ahqvispfx Aizori approx. 4,350 x 1,850 x 2,030 mm (L x W x H)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Wemas Type: HITURN Year of manufacture: 1999 Machine number: 180 Machine type: Cycle lathe Control System Control system: Heidenhain Electrical Data Operating voltage: 380 V Frequency: 50 Hz MACHINE DETAILS Performance Connected power: 11 kW Dimensions and Weight Length: 3,000 mm Width: 2,000 mm Height: 1,800 mm Cedpfx Ao Advbysizeri Weight: 3,000 kg EQUIPMENT Tailstock Multifix tool holder Steady rest

Year of construction: 1994, condition: used, functionality: fully functional, Lathe, including chip tray and emulsion tank with pump, machine accessories: 315 mm chuck, rotating center for tailstock, technical documentation, technical parameters: distance between centers 2000 mm, swing over bed 500 mm, swing over carriage 250 mm, spindle bore 56 mm, maximum workpiece weight 1100 kg, spindle taper M 60, 1:20, tailstock center taper MORSE 5, spindle speed range 11.2-1400 rpm, power 2 x 5.5 kW, machine dimensions (wxd) 1180 x 4420 mm, weight 3260 kg, the machine can be tested by arrangement. Creds Ah S Auspfx Aizei

Condition: good (used), Year of construction: 1975, Revolver turret lathe, manufacturer: HESTIKA, type: HR42, year of manufacture: approx. 1975. Spindle bore max: 42 mm, with revolver head and Multifix tool holder, type: B. Spindle speeds: 88 - 2800 rpm, collet chuck, coolant system. Machine documentation available. Collet chuck for 173E collets. Cedpfx Asvgbqfoizeri Machine in good condition.

Condition: ready for operation (used), Year of construction: 1990, Ott 2513, Heavy-duty Veneer Press 4 cylinders Cedpfs Ahx Ucsx Aizori Pressing area: 2500 x 1300 mm Heating: electric Opening and closing: electric Pressing force: 90 tons Year of manufacture: 1990 Price: 6,500.-