Used Rotor Milling Machine for sale (84,133)

Condition: good (used), Year of construction: 2005, Internal article no.: 24012 Universal milling machine Ndsdpfxsrywa Rj Aadjd Macmon M100 NC YEAR OF MANUFACTURE: 2005 Control: Heidenhain TNC124 + coolant pump + machine vice Travel: X 310 / Y 170 / Z 330mm Speed: 40-2000 rpm Mounting: SK40 LxWxH: 1200 x 1600 x 1850mm Weight: approx. 1000Kg

Condition: excellent (used), Year of construction: 1991, A very well-preserved milling machine, make: TOS KURIM, model: FGS 32/40, machine no.: 23304040, equipped with digital readout and milling cutters. Table clamping area: 320x1400 mm Longitudinal table travel: 1000 mm Transverse travel of milling head: 400 mm Vertical table travel: 450 mm Table taper: ISO 50 Spindle diameter at front bearing: 100 mm Maximum spindle torque: 1500 Nm With vertical milling head Video available on request Ndodpjxzdnxsfx Aadsd Weight: 4400 kg

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Nedpfexwdygex Aadsdd Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: used, x-travel 315 mm y-travel 180 mm Ndsdpfxjxwdvhj Aaded z-travel 320 mm 5 14 mm ISO 40 DIN 2079 45 - 1950 U/min flute distance 10 - 170 mm/min no. of flutes 4 m/min total power requirement 5,1 kW distance between table/spindle 1400 kg diameter of rotary table 3000 x 2700 x 1800 mm - Robust/powerful universal milling machine - HEIDENHAIN digital display - Coolant device

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Nsdpsxy S Eijfx Aadjdd Very good condition, the machine comes from a very small joinery workshop that was closed due to retirement. Everything works perfectly. All bearings and guides are in good condition. Year of manufacture: 1997. The fence on the moulder allows adjustment of the fence jaw depth, with fine adjustment and a mechanical counter; this makes it possible to perform trimming work, e.g. on a gluing profile. The entire fence can also be moved in depth using a handwheel and leadscrew, and a second mechanical counter allows for highly precise and quick settings. Equipped with spindle lock via lever. Chip extraction is excellent, with 2 extraction ports: 125 mm at the fence and 100 mm at the machine table. Comes with a 30 mm spindle, infinitely tiltable from -5° to 45°. The spindle tilt is electrically controlled with a highly accurate display. Features right/left rotation. Nationwide delivery and on-site demonstration within Germany by us for €220, so you have no risk when purchasing. Shipping to Austria and the rest of the EU possible on request. Large table opening up to 480 mm, reducible with various rings (enabling the use of cutters with very large diameters; also ensures safe operation with small cutters). Spindle speeds: 3000, 4500, 6000, and 9000 rpm. Spindle height adjustment is also electric, with a very precise display. The table is made of heavily ribbed grey cast iron. Exchangeable spindle (a 40 mm spindle can also be used). Very robust, durable construction – built for the heaviest milling operations; suitable for all milling tasks. Optimal power transmission via V-belt drive. Comes with manual/operating instructions. Includes 3-roller power feed HOLZ HER, type 1117. The power feed has right/left operation and 8 speeds. The feed rollers are individually mounted. The machine table is 1180 mm wide and 800 mm deep, plus 2 table extensions on the left and right (each 600 mm wide); there is also a pull-out support. Ready to use immediately. 380V, 5000W and 6000W thanks to 2 speed settings. Equipped with all necessary safety devices, motor brake and emergency stop. The machine is certified by the woodworkers’ employers’ liability insurance association and has a CE mark. The machine weighs approx. 1200 kg. With motor protection switch against overload. Professional machine, not DIY store quality. Optimal, simple, fast and safe handling.

Condition: used, Year of construction: 1976, Machine type: Universal milling machine Manufacturer: SHW Model: UF21 Year of manufacture: 1976 Control type: NC Country of origin: Germany X-axis travel: 1050 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Spindle taper ISO: SK40 Spindle head swivel right-left: 90° Quill travel: 180 mm Spindle speed range: 36–1800 rpm / 18 steps Feed rate X+Z: 0.3–1800 mm/min Feed rate Y: 0.3–900 mm/min Rapid traverse X/Z: 1800 mm/min / Y: 900 mm/min Table size: 1200 x 550 mm Total power requirement: approx. 10 kW Ndjdsxwnm Depfx Aadod Estimated weight: 4400 kg Machine dimensions (L x W x H): approx. 3.1 x 2.5 x 2.2 m Spindle motor power: 6.8 kW

Condition: good (used), Internal item no.: 25029 Universal milling machine Deckel FP1 3-axis active digital readout (Heidenhain TNC113) Year of manufacture: 1987 Spindle taper: SK40 (S20x2) Travel: X 300 / Y 160 / Z 340 mm Speed: 40 - 2000 rpm (2 gearbox ranges) Ndjdpfx Aewvgcdeadsd Infinitely variable feed. The machine is in a well-maintained condition and can be inspected under power on site. Including extensive accessories: - Operating manual / Electrical diagram / Spare parts list - Deckel drawer cabinet - SK40 tool holders (S20x2) - Counter-support - Coolant pump

Condition: ready for operation (used), Year of construction: 1986, Immediately available from location: Fully automatic milling machine Busch Type NF 8/32 Year of manufacture: 1986 Groove width up to 32 mm Machining length up to 6100 mm Automatic material feed Automatic infeed Drive 5.5 kW Accessories: support tables Nodpfsxzdkyox Aadjdd Tool holders, milling cutters Coolant system Digital readout Weight: 4 t Price: EUR 3,750.— plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 50052, Year of manufacture: 1970 Serial number: 50 052 The machine was overhauled in 2007. GENERAL CHARACTERISTICS OF THE MACHINE The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks. The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time). Clamping Table: Dimensions of one table: 1,600 x 3,000 mm Total length of connected tables: 7,000 mm Clamping surface of connected tables: 6,500 mm Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs Table height from base: 900 mm Travel of one table: 3,000 mm (connected tables: 6,500 mm) Table feed rate: 20 – 2,000 mm/min Rapid traverse: 4,000 mm/min Ndjdpfx Aasxxwy Aeded Gantry with height-adjustable crossbeam: Clearance between side columns: 2,020 mm Crossbeam height adjustment: 110 - 1,685 mm Crossbeam feed rate: 1,450 mm/min VF 160 Horizontal Headstock: Taper: ISO 60 Motor power: 30 kW Speed range: 15 – 710 rpm Feed rate: 10 – 2,000 mm/min Number of speeds: 16 VF 120 Vertical Headstock: Taper: ISO 50 Motor power: 18 kW Speed range: 28 – 910 rpm Number of speeds: 16 Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

Condition: used, x-travel 500 mm y-travel 380 mm z-travel 350 mm speeds 20 - 5000 U/min table surface area 800 x 355 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 6,0 kW weight of the machine ca. 1800 kg dimensions of the machine ca. 2210 x 2680 x 1965 mm From a training center (“Daimler Chrysler AG”) Completely overhauled in 2006 for approx. 33,000 euros Includes new HEIDENHAIN “124” control Very little use since overhaul (!!) Operating hours – “machine ON” only: 10,407 hours Features: - Electric CNC universal tool milling machine - HEIDENHAIN TNC 124 linear control (installed in 2007) * Swiveling control panel, front right of the machine - Electro-hydraulic tool changer - Vertical milling head - ISO 40 with vertical work spindle * Manual spindle feed .. 50.0 mm * Scale ring for reading the quill adjustment - Horizontal work spindle incl. counterholder - Rapid traverse feed X-axis .. 0 - 4000 mm/min - Rapid traverse feed Y-axis .. 0 - 2000 mm/min - Rapid traverse feed Z-axis .. 0 - 4000 mm/min - Central lubrication, electric Nodpfx Aevuz Rusadodd - Pneumatic minimum spray device (lubrication system) - Coolant device - Machine stand with base - Machine light - Original operating instructions + circuit diagram + acceptance report, etc.

Condition: used, WEMA Probst profile milling machine Ndodpfoc N N U Nox Aadsd Hauptmtor 11kW dismantled and reverse loading ready

Condition: reconditioned (used), Year of construction: 2016, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,300 mm, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, spindle speed (max.): 7,000 rpm, spindle speed (min.): 20 rpm, table length: 8,000 mm, table width: 1,100 mm, RepairFIT by Dornhöfer Nsdpfx Aexvx Ameadodd The difference. Including installation & commissioning! Year of manufacture: 2016 Capacities / Travel distances: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Cross (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on the table surface: units: 7 Width of T-slots: 22 mm Distance between slots: 140 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup Blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Type A Main drive: Drive power: 100% duty cycle 43 kW Spindle speed range: Max. spindle speed: 20 – 7,000 rpm Torque: 900 Nm Feeds: X, Y, and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y, and Z axis 35,000 mm/min Base area SLP8000: (without enclosure) 13.0 x 4.5 m Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, Diagonal H207 Adapter angle milling head SK50 with Hirth gearing Automatic tool changer, 60 magazine places Chip conveyor Preparation / integration of NC rotary table Adaptive control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for a profitable entry into our product lines. The machines offered in this line are procured by us through a strict selection process and undergo a thorough inspection (Deep-Dive Check). After intensive cleaning, any identified defects or faults are professionally repaired by our expert service team.

Condition: good (used), Year of construction: 2003, Internal item no.: 25045 Ndodew Hrycjpfx Aadod Universal Milling Machine Emco FB4 Year: 2003 + Accessories (Hydraulic machine vice Allmatic 110 / 12x SK40 holders in rack) + Electrically tested until 11/2028 (as per inspection sticker) + 3-axis digital readout Heidenhain ND780 Travel: X 450 / Y 300 / Z 350mm Quill stroke: 100mm Main drive: 3.2kW Speed range: 63 - 3150 rpm Milling table: 800x400mm Automatic central lubrication Dimensions (LxWxH): 200 x 200 x 200cm Weight: 2100kg

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex CH toolmaking: 5-axis milling machine Deckel Maho Type DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table: 400 x 280 mm Table load capacity up to 100 kg Nodpfxjxzdkae Aadjdd Travel X/Y/Z: 350/240/340 mm Stepless spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Servo motors for X/Y/Z axis Swivel range: 360 degrees Table clamping: plus 105 / minus 150 degrees Weight: 2 t Tool holders, hydraulic vice Price: EUR 5,750 plus VAT, ex location

Condition: good (used), functionality: fully functional, CNC tool milling machine MIKRON WF 21 C CNC control Heidenhain TNC 155 year of construction 1988 Ndjdpfxsxr Dy As Aadsd Technical data X: 450 mm Y: 400 mm Z: 400 mm Table size 700 x 350 mm Spindle holder ISO 40 Spindle speed 40-4000 rpm 21 steps Feed 2-3000 mm/min. Rapid traverse X and Y 6000 mm/min. Rapid traverse Z 5000 mm/min. Pinol displacement 90 mm Distance table - spindle nose max. 450 mm Main spindle drive 3.3 and 4 kW Space requirement L x W x H 3000 x 2700 x 2000 mm Weight 2400 kg

Year of construction: 1988, condition: good (used), For sale is a milling machine of the company Maho and the type 500 W The machine is in good condition and fully functional Year of manufacture: 1988 Heidenhain TNC 232 travels X- 500 mm, Y- 380 mm, Z-350 mm Nsdoittrljpfx Aadedd spindle mounting ISO 40 quill stroke vertical 50 mm spindle speed 20-4000 rpm, infinitely variable feed range 1-3000 mm/min rapid traverse 5 m/min table load 250 kg total power requirement 11,3 kW Machine weight approx. 2 t All prices plus VAT machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: good (used), Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: EMCO, milling machine with digital display and hydraulic clamping Nedpfxsxvraxe Aadsdd -Clamping table: 800 x 400 mm -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping Accessories: incl. 9 tool holders (see photos) -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg

Condition: used, Year of construction: 2007, Serial no. 107.51.00.013, control unit by Heidenhain, type ITNC530, 5 axes, rotary/swivel table, travel X/Y/Z 1,000 x 700 x 700 mm, electrospindle by Step Tec, max. speed 24,000 rpm, 5-position pallet station, pallet size 500 x 600 mm, 165-tool changer, HSK 63 tool holder, swarf conveyor, belt filter, internal coolant supply, coolant temperature control, enclosure, BLUM laser measuring system, tool and accessory package, mobile workbench with 6 drawers, single-door, tool trolley, orange, 2 table carts, contents: tool holders, clamping devices, FCS zero-point clamping system, 5 grid plates, HD vise. Nedpfx Aoxug Aljadjdd

Condition: used, Year of construction: 2008, x-travel 12.000 mm y-travel 1.500 mm Nsdpfx Aexvdunsadsdd z-travel 3.500 mm feed 20.000 m/min Tool adapter DIN 69871 A50/HSK63

Condition: ready for operation (used), Year of construction: 2020, Immediately available ex-location: KIMLA (Poland) CNC Gantry Milling Machine for large-format machining Year of manufacture: 2020 (original price €170,000) Clamping surface: 8100 x 2600 mm Travel axes X/Y/Z: 8100/2600/200 mm Becker vacuum table with 3 pumps, 250 m³ Suitable for steel/aluminum machining Spindle: 16 kW Spindle speed up to 24,000 rpm HSK 63 F tool holder Complete milling enclosure Tools with compressed air cooling Ndsdpfexy Rv Hjx Aaded 12-position automatic tool changer with 12 quick-change tool holders Automatic marking system Automatic tool length sensor for calibration Cutter offset correction at reference point Chip extraction with 12.5 kW blower, output 11,000 m³/h Full enclosure For a price of €37,500 plus VAT, ex-location.

Condition: used, Year of construction: 2007, Serial no. 11480001523, Heidenhain control, type iTNC 530, 5 axes, travel X/Y/Z 1,000 x 1,000 x 1,000 mm, max. spindle speed 24,000 rpm, 2-station pallet changer, 120-position tool changer, HSK 63 tool holder, compact coolant unit, through-spindle coolant (IKZ), belt filter, chip conveyor, BLUM laser measurement system, tool and accessory package including: 2 table trolleys, drawer container with 7 pull-outs, mobile, WTS trolley, contents: HSK 63 tool holders, FCS zero-point clamping system, 10 grid plates of various sizes, operating hours: 44,190; 96,709. Nsdpfx Aoxugznjadsdd

Condition: used, Year of construction: 1997, Immediately available from training workshop: CNC 5-axis milling machine Deckel Maho Model: DMU 50 T Year of manufacture: 1997 Control: MillPluss SK 40 Nsdpfoxy Ralsx Aadsdd Spindle speeds: 20 – 9,000 rpm Travel X/Y/Z: 500/400/400 mm Table: tilting rotary table 700 x 500 mm Manual tilt B axis 105° (-10/+95°) Manual rotation 360° Table load max 200 kg Tool changer: 16 positions Feed rates max 10,000 mm/min Rapid traverse: 12 m/min Drive: 17 kW Weight: 3 t Extensive accessories: hydraulic vice, tool holders, milling cutters Price: €6,500.— plus VAT ex location

Condition: ready for operation (used), Year of construction: 2009, Immediately available from site: CNC bed milling machine Iberimex Model Ecomill BF 2600 Year of manufacture 2009, low operating hours Heidenhain iTNC 530 control Table 2700 x 1050 mm Travel X/Y/Z: 2600/1000/950 mm Table load capacity: 6 t Internal coolant supply: 14 bar Hydraulic milling tool clamping SK 50 taper Spindle speeds: 24 – 1600 rpm Ndedexy N Rispfx Aadod Spindle drive: 25 kW Chip conveyor Weight: 14 t Offered at €24,000 plus VAT, ex-site.

Condition: ready for operation (used), Year of construction: 2010, Universal milling machine with slotting head SHW Type UF 1 Year of manufacture: 1970 Retrofit: 2010 Table: 700 x 310 mm Travel X/Y/Z: 550/340/420 mm Spindle mount: SK 40 Spindle speeds: 46 – 2200 rpm Quill stroke: 80 mm Slotting stroke: 200 mm Feeds: 12 – 254 mm/min Weight: 2 t SK 40 tool holders Ndjdpfx Ajxy N N Seadsd Hydraulic vise Weight: 2 t Price: EUR 2,500.— plus VAT ex location

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Njdpfx Aaexy N Nxjdedd Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location