Used Round Knife for sale (5,344)

Condition: used, Anvil with round and square horn Standard anvil, Bohemian design Face width: 160 mm Face length: 530 mm Horn length: 250 mm Anvil weight: 190 kg Height: 350 mm Bwsdpfxeyk Hrmj Aknew Base: 430 x 310 mm - 28 mm square hole for anvil tools - Drop-forged, hardened Dimensions (L x W x H): 780 x 310 x 350 mm Anvil weight: 190 kg Good condition, very bright ring, good quality

Condition: used, Year of construction: 2001, Three knife trimmer Müller Martini Merit S Year: 2001 Bwodpoylblkjfx Aknew Hour counter: 30400 Description: - Digital display - Infeed conveyor from the left - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 434 x 310 x 80 mm Minimum size (cutted): 136 x 100 x 2 mm Max. mechanical speed: 1.000 - 4.000 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2026, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Bwjdpfx Aeki Tqcjknjw Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Condition: new, Rollmak 3-Roll Round Bending Machine SME 110-10/5.5 Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1050 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness for pre-bending 5.0 mm Roll length 1050 mm Roll diameter 110 mm Smallest bending diameter 165 mm Weight 920 kg Dimensions L-W-H 2150 x 850 x 1150 mm Motor: 2.2 kW Equipment: Top and bottom roll electrically driven Bwedpelu Epaofx Aknsw Top roll can be swiveled out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Rollmak 3-Roll Round Bending Machine SME 140-20/4.5 Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 2050 mm Sheet metal thickness 4.5 mm max. Sheet metal thickness 4.0 mm for pre-bending Roller length 2050 mm Roller diameter 140 mm Smallest bending diameter 210 mm Weight 1550 kg Dimensions L-W-H 3150 x 900 x 1200 mm Motor: 2.2 KW Equipment: Top and bottom rollers electrically driven Top roller can be swiveled out Conical bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² Bsdpslu Eumefx Aknsww CE marking

Condition: new, Rollmak 3-Roll Round Bending Machine ST3 130-15/6 Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1550 mm Sheet metal thickness 6.0 mm max. Sheet metal thickness for pre-bending 5.0 mm Bwedjlu Evnepfx Aknsw Roll length 1550 mm Roll diameter 130 mm Smallest bending diameter 195 mm Weight 1650 kg Dimensions L-W-H 3250 x 850 x 1300 mm Motor: 3.0 kW Equipment: Top and bottom rolls, electrically driven Top roll can be swiveled out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Year of construction: 2025, - Capacity: 1070 x 5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (for material clamping) - Digital display for rear roller movement - Hardened rollers - Tapered rollers - Emergency stop - Documentation Bedpfxogg Nv Sj Aknoww - 400V

Condition: new, Year of construction: 2024, - Capacity: 1070 x 3 mm - Electrically adjustable rear roller Bwodpfx Aogg Rbpjknow - Digital display - Hardened rollers - Tapered rollers - Brake motor - Foot switch - Emergency stop - Documentation - 400V

Condition: used, Item: D-9779-Tank 350L Bwjdpfxogh Dmlj Aknjw Stainless steel round tank, diameter 1200 mm Agitator from top Lid at top, Capacity 350 L Diverse connections mount from side Flat bottom with conus to outlet, 3 legs

Condition: new, 3-Roll Round Bending Machine, Ostas ORM 1270 x 140 Technical specifications: Special equipment included in the price: Motorized adjustment of the lower rolls Hardened rolls Motorized adjustment of the rear rolls Digital display Sheet metal width 1270 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness for pre-bending 4.0 mm Bsdpfx Aofpmz Hsknsww Roll length 1270 mm Roll diameter 140 mm Weight 1400 kg Dimensions L-W-H 2500 x 800 x 1100 mm Motor: 2.2 kW Equipment: Top and bottom rolls driven by electric motor Top roll can be swiveled out Conical bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable CE marking

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-230 Serial No. 05.833/00, Year of manufacture 1969 Bwjdpfxsfqpxio Aknjw Trough diameter 1100 mm Total trough outer height approx. 650 mm Working container / gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, infinitely variable Motor power 7.5 kW Power connection 400 volts, 50 Hz - Operating time can be set manually and via a timer - Infinitely variable motor speed via a variable gear drive - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated cover - Manual separation flap - Integrated sieve separation device after the separation flap - Liquid connection - Material outlet opening 180 x 150 mm - Control cabinet for wall mounting - Partition cover with perforated sieve Space requirement with base L x W x H 1800 x 1750 x 1700 mm Weight approx. 1800 kg Good condition Functional description: The workpieces and abrasive media are put into motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the abrasive media causes deburring and surface finishing of the workpieces.

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Bwodpfx Akjfu Swxenow Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: good (used), -KOM 800- Here, we are offering a magnetic plate from the company Narex. This is a permanent magnet plate. Data: Manufacturer: Narex Bjdpfx Ajd R Rv Tokneww Type: PERMAG 250 687 Weight: approx. 19 kg Dimensions: Ø 250 mm, height: 87 mm Distance between magnetic strips: 20 mm

Condition: new, Year of construction: 2026, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, overall weight: 4,900 kg, total length: 4,050 mm, total width: 1,550 mm, total height: 1,470 mm, input voltage: 400 V, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, - 4 rolls - Capacity 2070 x 10 - Bending capacity 2070 x 8 - Hardened rollers - Diameter above roller 220 mm - Diameter under the roll 220 mm - Side roller diameter 180 mm - Hydraulic - Digital display for the left roller movement - Digital display for the movement of the lower middle roller - Digital display for the movement of the right-hand roller - The top roller can be folded out hydraulically - Steel construction ST-52 Bwjdpfx Akou Evqhenow - Hydraulic drop end for easy roller positioning - Hydraulic up and down movement system with center and side rollers - Hydraulic balancing system - Overload protection - Documentation - 400V

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KPP400, General: The Potato Washing and Peeling Machine is an advanced piece of equipment specifically engineered to clean and peel potatoes efficiently in large quantities. This machine transforms the labor-intensive and time-consuming task of potato preparation, making it indispensable in the food processing sector. Key Features and Benefits: Efficient Cleaning and Peeling: The machine uses rotating brushes or abrasive surfaces to effectively remove dirt, debris, and the outer skin of potatoes. Its design ensures a thorough cleaning and peeling process, which minimizes waste and maximizes the yield of usable potatoes. Time and Labor Savings: By automating the washing and peeling processes, this machine significantly reduces the manual effort and time required. It enables food processing facilities to handle large volumes of potatoes swiftly and consistently, enhancing overall productivity. Versatility in Potato Types: The machine is adaptable to various types of potatoes, accommodating different sizes and varieties. It can be adjusted to handle different shapes and ensure uniform peeling, regardless of the potato's size or texture. Gentle on Potatoes: Despite its powerful and efficient operation, the machine is designed to be gentle on potatoes, preventing damage or bruising during the cleaning and peeling process. This ensures that the final product retains its quality and appearance. Water Conservation: Many modern Potato Washing and Peeling Machines are equipped with water-saving features, utilizing efficient water circulation systems to minimize water wastage during the cleaning process. This eco-friendly Bodpfx Akst A Amponjww approach is crucial for sustainable food processing practices. Conclusion: The Potato Washing and Peeling Machine revolutionizes the processing of potatoes in commercial kitchens and food processing facilities. Its efficiency, versatility, and waste-minimizing capabilities streamline the potato preparation process and contribute to sustainable and efficient food production, meeting the needs of contemporary food processing industries.

Condition: excellent (used), Year of construction: 2010, 4-axis PEISLER Type :RT-215 Year 2010 ( 3rd piece available ) Center height: 215 mm with power chuck Fabr.RÖHM Type:KFD-HS215/3 Fmax.48KN Nmax.3000/min with hydraulic connection for chuck and drive shaft on both sides, without motor and controller in very good condition. Bedpfxst Daxxo Aknjww Quoted price is for one piece .

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, cutter head milling cutter -Type: R26Hole: Ø 27 mm -Dimensions: Ø 90 x 50 mm -Weight: 1.3 kg Bwjdpfx Akevz T Thonsw

Condition: new, - Capacity: 700 x 2 mm Bwodpfx Aoihv Hpsknjw - Conical rollers - Removable top roller - Foot control - Emergency stop - Documentation - 400V

Year of construction: 2009, condition: new, Loop sling, round sling, lifting strap, load securing strap Bjdjih N Hkspfx Aknoww 2 tons, 2 x 4 meters (meter circumference) 750 pieces, package price Multiple packages available Packaged on a pallet.

Condition: new, Cesurbend 3-roll round bending machine MRS 1050 x 110 Bwjdshrdiuspfx Aknow Technical specifications: Special equipment included in the price: motorized adjustment of the lower roll hardened rolls motorized adjustment of the rear roll digital display Sheet metal width 1050 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 1050 mm Roll diameter 110 mm Weight 1080 kg Dimensions L-W-H 1820 x 850 x 1150 mm Motor: 2.2 kW Equipment: Top and bottom roll driven electrically Top roll can be pivoted outwards Conical bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable CE marking

Condition: new, Ostas 3-Roll Round Bending Machine ORM 1070 x 110 Technical Specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 1070 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness for pre-bending 4.0 mm Roller length 1070 mm Roller diameter 110 mm Weight 1000 kg Dimensions L-W-H 2250 x 800 x 1100 mm Bwodpegkwhasfx Aknsw Motor: 2.2 KW Equipment: Top and bottom rollers, electrically driven Top roller can be pivoted outwards Tapered bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable CE marking

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Bjdohwrhbjpfx Akneww Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 1979, Round vibrator, vibratory grinding system, vibratory grinding machine, vibratory grinding round vibrator, tumbling system, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Manufacturer: OSRO, round vibrator type OS10 -Working container: elastically mounted -Total volume: 600 liters -Outer diameter: 1430 mm -Work basin width: 320 mm -Work basin height: 545 mm -Machine for: deburring, polishing, rounding edges Bwjdpfxeiqpyuj Aknew -Dimensions: 1570/1430/H1140 mm -Total weight: 1140 kg

Condition: ready for operation (used), To suit a MBO T500, Price £3,000     IN STOCK Bedjir E R Rjpfx Aknoww

Condition: new, Fastech 3-Roll Round Bending Machine FRS 1250 x 140 Bwedohzq Dxepfx Aknow Technical Specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment motorized lower roller adjustment 2 x digital display Sheet metal width 1250 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness for pre-bending 5.0 mm Roller length 1250 mm Roller diameter 140 mm Smallest bending diameter 210 mm Weight 1365 kg Dimensions L-W-H 2020 x 900 x 1200 mm Motor: 2.2 kW Equipment: Top and bottom rollers electrically driven Top roller can be pivoted outwards Conical bending device Asymmetrical roller arrangement Self-braking main motor Separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking