Used Sanding Polishing for sale (3,698)

Condition: used, machine/vehicle number: 008291, Position 1: Bottom Sanders VIET-S3 - VALERIA Position 2: Top Sanders VIET-S3 - VALERIA Cedpfsx A Tayex Agkspw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x760x1160 mm Weight 230 kg Total power requirement 3,5 kw Cpodpfx Agjvz Hnrokow

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach Cjdox Rpghjpfx Agkspw

Condition: used, functionality: fully functional, Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Cpedpfx Agoycpz Ujkjw Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: ready for operation (used), Year of construction: 2001, ROTER BERG – Polishing Stand - Infinitely variable speed control 200 – 1100 rpm - Automatic brake - Chuck diameter 200 mm with interchangeable jaws - Center height 300 mm - Drive power 0.75 kW - Connection cable Dimensions: LxWxH 0.6x0.5x0.4 meters / Weight: 95 kg Csdpfoyng A Hox Agkjpw Subject to errors and input mistakes.

Condition: used, machine/vehicle number: HR6-1000, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Cjdsyntrhopfx Agkjpw Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Control cabinet. Three rotary table polishing machines are available.

Condition: new, Year of construction: 2021, Table polishing machine / flat polishing machine for parts up to 3000mm length. With one or two polishing units. Basic machine and control cabinet new, polishing units used but completely overhauled with new polishing motor. Cjdjg D Rfmjpfx Agkopw

Condition: ready for operation (used), - double grinding and plishing machine - 1,5 kW - speed 1420 U/min - working hight is 600 mm - conical shaft Cpsdpfxsdz Uzbs Agkew

Condition: excellent (used), Double-sided grinding machine COMEC LN2G/8P+CA Codpsybaqqofx Agkopw Working width: 150 mm Number of units: 2

Condition: used, Year of construction: 2017, working width max. 240 mm Sanding height max. 140 mm weight ca. 2200 kg Cpodoxwtwuepfx Agkjw

Condition: used, grinding length ca. 2.600 mm grinding width ca. 850 mm working heigth ca. 340 mm engine 4 kW Cedpfjxtbvdox Agkepw

Condition: used, Number of sanding units 4 st. sanding width 1.300 mm Sanding height max. ca. 140 mm Cpjdpfexr N I Eox Agkow

Condition: used, sanding belt measurements 2.260 x 150 mm Motor output 1,5 kW Cedpfx Aewffpbegkjpw table: schwenkbar Dust suction hood 100 mm

Condition: used, sanding belt measurements 300 x 1010 mm Cpedpfx Agjlfdxxskjw engine 2,2 kW Dimensions (LxWxH) ca, 1.050x600x1.000 mm

Condition: used, engine 2,2 kW Cpodpfjlfdxujx Agkow Spindle length je Seite: 175 mm spindle diameter max. 35 mm

Condition: excellent (used), power: 3 kW (4.08 HP), High-Gloss Polishing Machine / Polishing Stand Manufacturer: Bauerrichter Model: PM 88 Cpsdpfx Agoym Atreksw This machine comes from a kitchen manufacturer and was used for, among other things, high-gloss fronts. The ultimate solution for stationary polishing tasks! Motor approx. 3 kW, 230/400V Height of polishing spindle / working height: approx. 900 mm Polishing wheel diameter max.: 450 mm Usable polishing width: 140 mm Storage table for e.g. polishing compounds, tools, etc.: approx. 350 x 350 mm Execution - Robust, welded steel construction with mounting flange for floor installation - One continuous polishing spindle, with polishing wheels mounted on both the left and right sides - Integrated storage table for polishing materials - Protective covers over the polishing wheels Dimensions (LxWxH): approx. 1600 x 1000 x 1200 mm Weight: approx. 400 kg Includes a completely new pleated polishing set as well as used polishing wheels, as available.

Condition: used, Year of construction: 1988, - Grinding width: 190 mm - Grinding height: 4 - 150 mm - 2 grinding units Cpedpfx Aoymnz Uogkow - Belt speed: 25 m/s - Feed speed: 5 - 25 m/min - Sanding belts: 1850 x 200 mm - Electrical connection: 400 V, 3/N, 50 Hz - Ex stock

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 5 h, machine/vehicle number: 6178, Exhibition machine: ACETI ART.70 Belt grinding and polishing machine with 2 motors 4.4 kW, 400 volts including 2 inverters T2 The machine is in our test room in Kobenz. Machine is new and has not run! Cpodpfx Asi Hp Nregksw GRINDING UNIT (left) - Sanding belt dimensions: 50 x 2500 - 3000 mm - Drive roller: 50 x ø 250 mm - Belt grinding arm: 0° - 90° - Belt speed: 18 - 36 m/sec POLISHING UNIT (right) - for grinding and polishing wheels: 300 x 35 mm - Brush maximum external size: 300 mm - Brush maximum width: 75 mm - Motor shaft diameter: ø 35 mm - Circumferential speed: 22 - 44 m/sec Size: W: 1650 x D: 600 x H: 2200 mm Volume: 73dB Weight: 295kg (without inverter)

Condition: like new (used), Year of construction: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with variable-speed conversion featuring Siemens inverter and cyclone extraction system. Cpjdpfjyglkysx Agksw For polishing wheels with a diameter of up to 350mm, maximum wheel width 35mm, wheel bore 20mm. Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine; its high dead weight absorbs the already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, cast iron housing. Additionally equipped with: Variable speed drive using Siemens Sinamics V20 inverter. Circumferential speed adjustable from 34 m/s down to 6 m/s. Sturdy base with cyclone extraction integrated in the base, thus requiring minimal space. Sound-insulated. The base must be filled with concrete by the customer. Automatic start/stop feature: When the external device is powered on or off, the extraction system automatically switches on or off with a 2-3 sec delay. There is no need to operate the extraction system separately. According to hazardous substance regulations, residual dust is extracted after the machine shuts down. The machine is located at 71334 Waiblingen-Beinstein and can, of course, be inspected by appointment. Please contact us for further information.

Condition: used, Year of construction: 1981, functionality: fully functional, Braun profile belt sanding machine BP 700, Table tiltable up to 45°, Cpsdpfx Ajw E Igpsgkjw Width 500 mm, depth 1260 mm, height 1040 mm, Sanding height 200 mm, cutting height 200 mm Sanding belt length 3020 mm Band saw blade length 3050 mm Working width 700 mm Three-phase motor 1.5 HP, 220/380 Volts Belt speed 18 m/s Mobile on base frame

Condition: excellent (used), functionality: fully functional, Brush sanding machine after lacquering RESINFER C-900 R Cpjdpfsx Uw Sgsx Agkow Working width: 900 mm Working height: 160 mm Number of sanding units: 4

Condition: excellent (used), Belt sander Make Karnasch Type ALMI AL 100 with 6 different contact rollers or sanding rollers Diameter : 17,5 - 20 - 22 - 28 - 38 - 48 mm belt width 100 mm Csdsuf N Scopfx Agkopw length 2000 mm Grinding range for grinding diameter 20 - 76 mm

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°÷ 45° Extraction connection: 120 mm Motor power: 3 kW Cpjdpfjyffxzjx Agkow Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Condition: used, SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - Control panel - Automatic loader - Maximum working length 300 mm - Min / max working diameter 8/80 mm - Working stations: Cjdpfsrnq Rijx Agkopw * automatic loader * turning with n. 2 gouges (roughing + finishing) * 1° shaped knife * 2° shaped knife * unloading

Condition: used, Year of construction: 2008, machine/vehicle number: 147233, Ref. no. 20312 Codpfx Ageylylijkspw Technical Data: - Workpiece thickness: 0.8 to 51 mm - Max. working width: 1370 mm - Max. grinding height: 100 mm - Grinding diameter: 150 mm - Grinding speed: 1720 rpm - Feed rate: 3.7 m/min - Drive: 400 V / 9.7 kW - Working height: 1100 mm - Space requirement approx.: W 1700 x H 1200 x D 1200 mm - Weight approx.: 800 kg - Separate mobile motorised grinding dust extraction unit