Used Saw Machine for sale (66,498)

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Prsdpfxjxvbvvo Airoc - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: used, Year of construction: 2003, functionality: fully functional, Used IDEAL BAS120 resistance butt welding machine for joining band saw blades, built in 2003 (serial no. 229981). It welds the blade and then anneals the seam on the same machine, so it fits a saw shop, a blade service workshop or an in-house sawmill maintenance department. The machine has an IDEAL UniOp control, which gives repeatable weld settings. Welding power is 45 kVA and the upsetting force is 20 kN. Model iDEAL BAS120 Year 2003 Control UniOp Power 4.5 kVA Voltage 415 V Frequency 50-60 Hz Max. Stauchkraft 20 kN Serial no. 229981 Pjdpj Abzqbefx Airorc

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Pedpfx Aoy Nuhnsirjrc Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. The machine is used and located in our workshop. Viewing is possible on site. Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 1600 mm - Cutting width with parallel guide 1250 mm - Sawtooth blade ⌀350 mm - Arbor flange diameter 87.5 mm - Table fence adjustable to 90° – 45° angle, accuracy ±1° - Max. cutting height with ⌀300 mm blade, 95 mm - Max. cutting height with ⌀350 mm blade, 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Dimensions of folded machine 2020x3380x1200mm Pedpfx Aiszrk N Rjrorc Net price: 16000 PLN Net price: 3721 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Podpfxoy H Dblj Airorc Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Cutting plane directly on the saw blade Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life; 6-year HOLZKRAFT warranty on wear of the swivel segments Precision-guided format sliding table made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the sliding table guide rails Parallel fence as standard with round bar guide and fine adjustment Large work table made of milled cast iron Smooth operation and precise cuts Standard table extension and table lengthening enable easy work with larger workpieces Extendable aluminum telescope fence with angle adjustment and two professional folding fences Made in Italy Prodswb Eh Nopfx Airsc Motor 4.0 kW - 400 V Saw blade tilt 90 - 45° Format sliding table length 1600 mm Table length 1020 mm Table width 325 mm Cutting width with parallel fence 700 mm Max. cutting height 90° = 100 mm Max. cutting height 45° = 79 mm Saw blade diameter 315 mm Saw blade speed 315 mm Max. crosscut width to the left of the saw blade 1660 mm Scoring saw blade diameter 80 mm Scoring saw blade speed 7600 mm Weight: approx. 276 kg Note! The parallel fence and table extension on the right are not visible in the pictures. Availability: short-term Location: Flörsheim

Condition: used, 3.7 kW motor Table length 260 cm Working width 100 cm Psdeulg Szepfx Airjrc With a cutter

Condition: excellent (used), Saws and tools washing machine Rotatherm Pedpfx Aioznm Tdorjrc

Condition: used, Bernardo CSM2000 circular saw-milling machine, in good condition, 3 kW, 315/30 mm, approx. 2200 mm cutting length, approx. 100 mm cutting height, approx. 500 kg Prjdpfx Aisx H Ufbjrjc Prices subject to change, errors and misprints excepted.

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Pedjmrnk Eepfx Airsrc Weight [kg] gross/net – 210 / 180 kg

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) Psdpfx Asyx S N Usirjrc POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)

Condition: as good as new (ex-display), Demonstration machine Prsdpevr I Rcjfx Airec Robust band saw for logs up to 71 cm in diameter with extendable rail sections—extension is unlimited. Automatic feed with continuously variable speed. Electric height adjustment controlled from the operator panel. 3.8-inch touch LCD display for height adjustment. Saw unit suspended on both sides for increased stability and improved precision. CE certified. Technical data: Max. log diameter: 71 cm Max. board width: 67 cm Motor output S1: 5.5 kW Cutting length, base version: 2.1 m Cutting length, extension section (optional): 3 m, 1 m Weight: 550 kg Extras not included in the price (sample image).

Condition: refurbished (used), functionality: fully functional, We currently have a HewSaw R250 available for delivery. The machine will be fully mechanically refurbished, including installation of new electric motors. It is an early-generation R250, but after refurbishment it offers excellent performance and reliability. Predeyu Scropfx Airsc The package also includes a Comact log infeed system, ensuring efficient log handling. The line can be customized according to your needs.

Year of construction: 1989, condition: good (used), Kasto fully automatic band saw, type HB 420 AU. Sawing capacity for round stock: 420 mm Sawing capacity for square stock: 420 x 420 mm Maximum clamping opening: 480 mm Saw blade: 6300 x 41 x 1.3 mm Variable speed: 20-130 rpm Prjdpfx Aeh Huazeirjc Chip conveyor Motor power: 8 kW Weight: 3360 kg Machine in good working condition.

Condition: new, Saw shaft and saw bush Tool shaft and clamping bush Pedpfx Aijnladhsrorc

Condition: new, Panel saw VPS 22-51 VR ED KS Holzkraft -Exhibition machine- -----Technical data----- Cutting length: 5100 mm, Podpfx Ajwnrf Usirsrc Cutting height: 2200 mm, Cutting depth: 60 mm, Saw blade diameter: 250 mm, Motor: 3 kW, Dust extraction port diameter: 100 mm, Space requirement (L x W x H): 6300 x 1800 x 3200 mm - Clamping force of clamping system: 250 kg Dust extraction connection: - Dust extraction port diameter: 100 mm - Minimum air flow for dust extraction: 1800 m³/h - Minimum air velocity: 20 m/s Equipment: - Lower material support: metal rollers - Adjustable slat bed: automatic - Vertical dimension display: digital - Horizontal dimension display: digital - Panel clamping system - Locking of the saw carriage: pneumatic Electrical data: - Power of drive motor: 3 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: good (used), Year of construction: 1992, Bandsaw automation machine, manufacturer JAESPA, type: W400 AZ Control system: Minipos 807, year of manufacture: 1992 Cutting diameter for round material: max. 400 mm Saw blade length: 5500 x 32 x 1.1 mm Feed: automatic, section length: min. 20 mm Chip conveyor Total power consumption: 4 kW Weight: approx. 2500 kg Accessories: 2 saw blades, roller conveyor 6 m, motorized drive, machine documentation available. Podpfx Aogf H Sajirsrc Space requirement: 2.8 x 2.8 x 2 m

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Predpsxua N Sjfx Airsc Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Prsdpfxsmrp Tlj Airsc Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 1978, condition: used, machine/vehicle number: 1078136, Behringer full automatic sawing machine in a good working condition. Prsdpfobta Dmex Airec Capacity round 320mm

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Psdpfx Aiezrpl Djrjrc Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: good (used), Year of construction: 1993, machine/vehicle number: 28794, Offer 24419 Technical data: - Roller diameter 520 mm - projection 510 mm - max. passage height 420 mm - Table size 750 x 800 mm - Table swivels left + right 15 / 30 ° - Table height from floor 1020 mm - Saw blade length 4120 - 4200 mm - saw blade width 20 - 25 mm - infinitely variable cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min Predpfx Aieuk D I Reroc - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welding unit in the machine stand - Grinding stone - Shears + air pump - lighting

Condition: new, power: 7.5 kW (10.20 HP), Equipment: scorer, Net price: €10,500 - Scorer - Saw blade tilt and height adjustment are manual Pjdpfx Aswf Ndcoirerc - Cutting height 200mm - Scoring device with separate drive motor - Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ - High dead weight ensures vibration-free operation - Large extension table with material roller - Parallel fence with round bar guide - Extendable aluminum longitudinal fence with two folding stops - 7.5 kW powerful main motor mounted on a robust cast iron frame - Four-times-cushioned sliding table made of anodized aluminum with high torsional rigidity - Multiple locking on sliding table - Standard with table extension and table extension made of thick plate - Large swing guard hood easily swivels up using a gas spring - Saw blade clamping via tool-free rapid system + Extraction connection Extraction port diameter: 120mm Extraction port diameter for saw guard: 80mm + Electrical data Connection voltage: 400V Mains frequency: 50Hz Nominal power consumption: 8.3kW Output power: 7.5kW + Sliding table and table Sliding table length: 3200mm Sliding table height: 890mm Table height: 890mm + Circular saw unit Cutting width with parallel fence: 1450mm Max. cross-cutting width left of saw blade: 3200mm Saw blade tilt: 90 – 45° Max. cutting height 90°: 200mm Max. cutting height 45°: 140mm Saw blade diameter: 550mm

Condition: used, The Trennjäger circular saw sharpening machine is suitable for sharpening small circular saw blades. It is designed for the precise resharpening of saw blades in woodworking applications. Technical data: Pjdpfx Aijzrx H Rsrjrc - Saw blade diameter: max. approx. 300 mm

Condition: new, Year of construction: 2024, Exhibition Machine Year of Construction: 2024 Equipment and Technical Data: Robust German engineering for trimming, cross-cutting, formatting, mitre cutting, etc. - Top-mounted control panel at eye level, swiveling, incl. fence guide - 7" touchscreen control for the electromotive positioning of cutting height, saw blade swivel adjustment, cut width stop and optionally for the height and side adjustment of the scoring saw Auto-EPS. Tool database for 50 saw blades and display of the current speed. - Electromotive height and swivel adjustment - Swivel range of the saw blade from 0 to 47° - APA saw blade quick clamping system - Speed of main saw blade 3000/4000/5000/6000 rpm - Protective device that can be swiveled away on both sides, safety guard with interchangeable insert wide/narrow for saw blades up to Ø 450 mm - Width stop with a cutting width of 1250 mm, electromotive - Trolley with a cutting length of 3200 mm and locking every 50 mm - Cross slide with support roller and adjustable extension in both directions. Length stop with mm scale and extension up to 3500 mm with 2 adjustable folding stops and 1 end stop, simultaneously usable as an angle mitre stop on both sides, infinitely adjustable from 0-46° with automatic length compensation and detent for 15°, 22.5°, 30°, 45° fixable. - Push-button control with electronic soft start (start/stop) - Electronic, maintenance-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at the width stop 1250 mm, electromotive - Length stop on the cross slide extendable up to 3500 mm - Max. saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast iron table top 1200 x 665 mm - plus table extension 750 x 655 mm - Table extension 1430 x 940 mm - Table height / working height 900 mm - Extraction connection 120 mm on the machine body, 80 mm on the safety guard - Motor power 5.5 kW / 7.5 HP - Electrical voltage 400 V / 50 Hz - Trolley, length and width stop profiles anodized - Machine body and swivel arm powder-coated in anthracite RAL 7021, cladding sheet safety guard on top in violet blue RAL 5000, on the machine body in light gray RAL 7035 - Footprint: 7110 x 4150 mm - Weight: approx. 1050 kg depending on the model, up to 1250 kg - CE compliant, GS tested, BG-wood dust tested Special equipment: Prsdpfx Aow I Ummjirec Incl. scoring unit 0.55 kW, electromotive positioning for side and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table into a lateral parking position, so that larger saw blades than Ø 350 mm can also be used without removing the scoring saw blades. Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: Tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by incremental adjustment by 0.05 mm per step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z = 12+12 Incl. SWIVELING DEVICE FOR THE CROSS SLIDE Quick and ergonomic sliding into the parking position Incl. Length stop with digital display mounted on each stop flap, adjustable to 0.1 mm, length max. 3300 mm