Used Saw Machine for sale (65,938)

Condition: new, NEBES TM 210 BELT SAW - Single-phase 230V Cast iron structure Adjustable cutting angle from 0° to 60° All cast-iron frame with large rapid vice and handwheel for clamping the workpiece Electric pump for blade lubrication and cooling Blade tensioning system with disc springs and oil-bath blade tensioning gauge to ensure constant tensioning Two cutting speeds and induction motor 0.03 mm accuracy on h 100 of cutting Hnjdpfx Aisi Ezq Ds Dol Cutting Capacity : 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight : Kg 179

Condition: new, NEBES TM 275 Band Saw Machine - 400 v Three-phase NEW "CE" Hnedpfx Ajh Nm Ncei Dol INDUCTION motor Cast iron structure Adjustable cutting angle from 0° to 60° All cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tensioning gauge Front controls and two cutting speeds Deviator for exclusion of coolant pump Blade guide with carbide skids (H.M.) Round cut 0° 220 mm Square cut 0° 200 x 200 mm Flat Cut 0° 230 x 185 mm Round cut 45° 150 mm Square cut 45° 150x150 mm Flat Cut 45° 150x200 mm Round Cut 60° 90 mm Square Cut 60° 90x90 mm Flat Cut 60° 90x120 mm HP 1.3 Voltage 400 V Blade size 2450 x 27 x 0.90 mm Weight 265 kg

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Hnsdpfx Ajfh R Tyoi Dol Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Hodpfx Aiefibfae Djnl Speed variator from

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Hodefibd Tepfx Ai Djnl Machine weight 820 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hnsdpfx Aisfh R Tuo Dsl Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling Hedpofibfgsfx Ai Djnl The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Condition: used, Technical details: grinding wheel diameter: 240 mm saw blade diameter: 600 mm total power requirement: 1,1 + (0,37 kW) kW weight of the machine approx.: 600 kg Saw Blade Sharpening Machine Machine performs grinding process automatically saw blade continue to move automatically Hnjdpfxou Ng Eds Ai Djl grinding wheel diameter: max.: 240 mm driving motor for feed (0,37 KW) *

Condition: used, Year of construction: 1980, Technical details: rpm spindle (continous): 2000 - 2500 U/min double strokes/min.: 25; 37; 50; 75; 100 H/min. Grinding-wheel diameter: Ø 250 mm work height max.: 1350 mm Hsdou Ng I Ejpfx Ai Djnl total power requirement: 2,7 kW weight of the machine ca.: 1,0 t dimension machine xH: 0,85 x 1,0 x 1,8 m Use for medium to larger metal circular saws from 250 - 1450mm. Saw blade attachment Ø 60 to Ø 80mm and shaft Ø 31,5mm Tooth pitch up to 42mm Tooth depth adjustment via scale Front cutting tooth: can be chamfered on both sides up to 45° and overcut at pitch 0.02mm *

Condition: like new (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 150 mm, warranty duration: 6 months, Equipment: rotational speed infinitely variable, Kaltenbach KKS 450E – very neat used machine from 2018 with 6 months warranty. Extra options: * Micro-dosing system & wet cooling * Horizontal (hydraulic) clamping cylinder 1 x Hnedpfx Aieyr S Sze Del The KKS 450E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chrome steel, brass, copper, bronze, etc. Benefits at a glance: - Clamping, sawing, reversing and releasing – all with a single lever - Saw height adjustable via a lever - User-friendly mechanical controls mounted directly on the machine - Excellent accessibility for saw blade changes and maintenance - Workpiece clamping device on both sides of the saw blade - Two cutting speeds for virtually all applications - Ergonomically positioned controls for user comfort - Adjustable sawing stroke limitation and rapid saw blade return All pre-owned Kaltenbach machines are supplied with a 6-month warranty as standard. Transport and installation available throughout the Benelux.

Condition: new, Bernardo circular saw FKS 2000 Pro/ 400 V Technical specifications Table dimension 800 x 380 mm Format table 2000 x 270 mm Trimming length 2000 mm Hnedod N Tagepfx Ai Dsl Max saw blade diameter 315 x 30 mm Max cutting height 90° / 45° 100 / 80 mm Cutting width at the parallel stop 1200 mm Table height 870 mm Table extension 500 x 310 mm Table widening 800 x 880 mm Boom table with roll 700 x 580 mm Speed Main saw blade 4000 rpm Speed scoring saw blade 5800 rpm Scribble saw blade 90 x 20 mm Suction connection of 100 mm Engine power S1 100% 3.8 kW (5.1 hp) Motor recording power S6 40% 5.3 kW (7.2 hp) Voltage 400 V Machine dimensions (W x D x H) 2000 x 2900 x 1180 mm Weight approx. 280 kg Delivery • HM saw blade 315 x 3.0 x 30 mm / Z 40 • Pre-cut saw blade 90 x 3.0 x 20 mm / Z 12 • Saw blade protection hood with suction connection • Connection hose with Y-piece • Miter stop with eccentric tensioner • Miter stop • Trimming shoe • Table extension • Table widening • Parallel stop • Extendable telescopic stop • Stop flap with fine adjustment • Boom table • Sliding stick • Sliding handle • Operating tool Properties • Extendable telescopic stop (up to 2260 mm) mountable at the front and rear boom table, infinitely pivotable from 90° to 45° • Important performance feature: saw blade diameter 315 mm can also be used when the scoring unit is mounted • Large-sized work table and standard table widening for cutting

Condition: new, Bernardo frame saw Topcut 3200 ER Technical Specification Table dimension 1100 x 735 mm Format table 3200 x 400 mm Trimming length 3200 mm Max saw blade diameter 400 x 30 mm Max cutting height 90° / 45°125 / 88 mm Cutting width at the parallel stop 1300 mm Table height 890 mm Table extension 600 x 615 mm Table widening 825 x 750 mm Boom table with roll 1240 x 860 mm Speed Main saw blade 3000 / 4000 / 5000 rpm Speed scoring saw blade 8000 rpm Scribble saw blade 120 x 20 mm Suction connection of 100 mm Engine power S1 100% 5.5 kW (7.5 hp) Engine recording power S6 40% 7.5 KW (10.0 hp) Scoring motor power 0.75 kW Voltage 400 V Machine dimensions (W x D x H) 3420 x 3600 x 1610 mm Weight approx. 850 kg Delivery • Electric saw blade height adjustment • Digital cutting height display • Saw blade cover with inlet roller • Miter stop • Eccentric tensioner • Table widening • Extendable telescopic stop • Longitudinal stop flaps • Boom table with roller • Sliding stick Hnsdpfxod N S T De Ai Dsl • Scoring unit with independent motor • Operating tool Properties • High-torque drive motor (5.5 kW) powerful drive motor, designed for optimum cutting performance • Smooth-running double roller trolley with center and end position locking for precise cuttings • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Boom table with roller for simplified handling of larger workpieces • Foldable parallel stop with mik

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Hjdpfx Ajwprmzji Djnl Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: excellent (used), HSS saws chamfering machine Peruzzi model SAUT 550, fully reconditioned and newly painted, like new Hnjdshzcctopfx Ai Del

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Hnedst Uk Rmopfx Ai Dol

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm Hnjdpfx Aehkhumoi Djl -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm Hsdpfx Aju Rv Ttoi Donl -Dimensions: 530/490/H600 mm -Weight: 78 kg

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Hnsdpfx Aow Ix Aloi Djl

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Hjdsv A Hhhjpfx Ai Donl Weight 29 kg Total power requirement 0,25 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x930x1500 mm Weight 700 kg Hnedpfx Aov A Hgqsi Dsl Total power requirement 1,65 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x780x1500 mm Hsdpfx Aisvz Htuo Denl Weight 500 kg Total power requirement 2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100xx750x1380 mm Hodpfx Aievz Htnj Djnl Weight 450 kg Total power requirement 0,5 kw

Condition: good (used), Year of construction: 2016, functionality: fully functional, Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements Hjdpfx Astqmmdsi Dsnl - safety gates

Condition: excellent (used), Band saw grinding and setting machine VOLLMER model BN30TS Hedpfxshhdaxo Ai Djnl

Condition: like new (used), Year of construction: 1978, Brazing machine for carbide saws VOLLMER model ML600 Hsdpfx Ajf Rlf Rsi Djnl