Used Saw Moulder for sale (6,193)

Condition: used, Year of construction: 1979, roll diameter: 600 mm cutting width: 580mm table tilting: yes belt speed: motor power: 2,2 kW motor brake: yes / manual suction connection: 100mm machine length: 120mm machine width: 800mm machine hight: 2015mm Bwedpfx Ajyhgigjbcsh weight: 200kg

Condition: used, Year of construction: 1994, sliding carriage length: 3200 mm cutting width with rip fence: 1200 mm Bwsdpfxsyhgi Ts Abcsh cutting width at the cross cut: 3450 mm Schnittiefe: scoring unit: yes height adjustment: manual / crank tilt adjustment: manual / crank rip fence adjustment: manual display saw blade tilt: digital display saw blade height: - display rip fence: scala display at the cross cut: Scala saw blade diameter: speeds: 3200 / 4200 / 5000 U/min motor power: 5 kW motor brake: yes - automatically suction connection: 80 mm and120 mm machine length: 3350mm machine width: 1800 mm weight:

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Bwsdpfx Aboxaudzoceh Max. panel length: 3200 mm Main saw blade projection: 110 mm No of Grippers: 11

Condition: used, machine/vehicle number: 008380, Max. panel width: 3800 mm Max. panel length: 3800 mm Bedpfx Aoygtb Tsbcjwh Main saw blade projection: 75 mm No of Grippers: 8

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Bwjdjygtbtspfx Abcjh Max. panel length: 3800 mm Main saw blade projection: 55 mm No of Grippers: 6

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 110 mm No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4 Bwjdpoygtbmofx Abcsh

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6 Bwjdpewuucijfx Abcoh

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF Bodpjwuck Ijfx Abcjwh

Condition: used, Planing table length: 1,200 mm Bedpfoxpuufsx Abcowh Working width: 230 mm Working height: 160 mm Number of spindles: 6 Spindle 1: Bottom / 7.5 kW / 6,000 rpm Spindle 2: Right / 15 kW / 8,000 rpm Spindle 3: Left / Shared drive with #2 / 8,000 rpm Spindle 4: Top / 11 kW / 8,000 rpm Spindle 5: Top / 7.5 kW / 8,000 rpm Spindle 6: Bottom / 7.5 kW / 8,000 rpm Spindle diameter: 40 mm Control: Memory Plus Feed speed: 40 m/min / 5 kW WEINIG Powermat 700 planing and moulding machine for four-sided planing and profiling of timber, equipped with CNC control. Available by arrangement from March 2026. The sale of this machine is subject to the prior sale of the briquetting press (Ref. No. 800055) or the complete planing mill (Ref. No. 100101).

Condition: used, Lot of machinery for a compact planing mill comprising: - Four-side planer Weinig type Powermat 700, year 2022 - Briquetting press Spänex type SHB 250, year 2019 - Rip saw Jrion type HFS-170/15-SA - Strapping machine StraPack type RQ-8S - Band resaw Hema type UH 800 TR - Extraction system Spänex filter tower and Höcker Polytechnik fan The system is still in operation and can be inspected under power at any time. Available by arrangement from March 2026. Bwedpfx Asxmh U Hsbcsh Further information on request. Individual sale possible by arrangement.

Condition: excellent (used), CATALOG NUMBER 7774 TECHNICAL DATA - max saw blade diameter: 500mm - spindle diameter: 30mm - top pneumatic hold-down - blade guard Bjdpfx Aboxl Dycecswh - pneumatic blade feed - max cutting height: 160mm - max cutting width: 585mm - main motor: 6.2kW - extraction port diameters: 80, 120mm - table dimensions (L/W): 1180x800mm - table height from base: 895mm - roller tables: 2 pcs - infeed roller table with guide: 1770mm - outfeed roller table with guide: 900mm - roller table width: 585mm - overall dimensions (L/W/H): 5000x1360x1370mm - weight approx.: 500kg ADVANTAGES – manufactured in Poland – original DTR documentation + CE (EU) – 2 roller tables – pneumatic saw blade stroke – used saw in perfect condition Net price: 19,900 PLN Net price: 4,740 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1993, Catalogue number: 7705 TECHNICAL DATA - Max working width: 220mm - Max working height: 160mm – 4 spindles: 1) Bottom horizontal: 220mm, 5.5kW 2) Right vertical: 160mm 3) Left vertical: 160mm (2nd & 3rd spindle) 11kW 4) Top horizontal: 220mm with electric adjustment up/down, 7.5kW - All spindles adjustable up/down, right/left - Spindle diameter: 40mm - 4 top metallic, toothed feed rollers - 1 top double rubber outfeed roller - 1 bottom rubber outfeed roller Bjdpfoyfg S Nox Abcewh - Feed via Kardana shafts - Stepless feed speed adjustment - Feed motor: 2.2kW - Lifting motor: 0.55kW - Electric planing thickness adjustment - Infeed table length: 1970mm - Central lubrication - Extraction nozzle diameter: 3x120mm, 140mm - Enclosed cabin - Dimensions (L/W/H): 3500x1600x1500mm - Weight: 1620kg Net price: 33,900 PLN Net price: 8,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: Bwjdpfx Abjx Ifbvecsh - Spindle diameter: 40mm - Spindle working height: 160mm - Interchangeable spindle - Spindle locking - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning - Carriage with height adjustment - Electric brake - 3-roller power feed - Number of speeds: 4 - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests Bodpfjwlfdxsx Abcjwh • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: ready for operation (used), Year of construction: 2017, Number of boring spindles 4 St. Working width 230 mm Working height 160 mm Feed motor 11 kW Feed speed 60 m/min. Control Memory Plus Bedpjyhfhnsfx Abcjwh

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Bwjdoyftzkepfx Abcoh Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: like new (used), Year of construction: 2022, Cutting capacity: 5800 x 5800 mm Saw blade diameter: 360 mm Bwjdpfx Abjyftpuecsh Motor power: 18.0 kW, 400 V, 50 Hz Scoring saw blade diameter: 300 mm Motor power for scorer: kW, 400 V, 50 Hz Cutting height: 6 - 105 mm Working height: 970 mm Saw feed speed forward: 5 - 160 m/min Saw return speed: 160 m/min Pusher return speed: up to 80 m/min Equipment: - Roller rails for 5800 mm cutting length - Angular stop at roller table, length 1450 mm - Two-track, hardened precision guide with drive rack for infeed - Infeed carriage with rack-and-pinion drive (servo drive) - Double clamping claws, 8 pcs, positions: 65/265/465/1065/1965/2865/3765/4665 mm - Format device, max. overlay of cover layer 10 mm Saw Machine fh4 580: - Machine table, heavy-duty steel construction, precision guides - Central blower for all air cushion tables - Frequency control for blower motor - Saw unit, vibration-free design, quick-clamping device for tool change - Saw feed with rack-and-pinion drive - Motorized scoring unit adjustable from the control panel - Automatic cutting length adjustment - Automatic central cleaning - Pressure beam with recesses for clamps - Safety curtain with pivoting plastic strips - Strip aligner before and after pressure beam, aligning range 40 - 2200 mm - Laser alignment light with green laser beam, - LED workplace lighting for the cutting area - Angular stop at air cushion table, length 2100 mm, - 3 movable air cushion tables, 2100 x 700 mm - Safety fence 18.3 running meters, total height 1800 mm MCS Evolution Main computer with Windows 10, 8 GB RAM, 128 GB SSD Standard machine functions - Cut pattern entry with graphical display - Cut pattern generator - Transfer of cut patterns from HPO via network and USB - Animated display of production processes - Plain text diagnostics/help - Target/actual value display - Trimming automation - Stress-relief cut programs - Slow entry/exit cutting - Stepless, automatic adjustment of pressure beam force - Stepless, automatic adjustment of pressure for strip aligners - Stepless, automatic adjustment of cutting length - Short stroke for the pressure beam - Advancement with open clamps Extended machine functions - "Easy" control panel with 24'' TFT monitor and integrated control buttons, mounted on a swing arm, height-adjustable - Software for label printer and editor Label printer: TSC MB240T Optimization program HPO 6.0 Advanced incl. license Cut pattern optimization software for creating cutting patterns - All panel types are optimized in parallel on all available processors (batch optimization) - Input and optimization of mixed part lists - Different panel types in a single part list possible - Automatic division into separate optimization runs - Import of part lists from MS Excel - Use of optional (filler) parts - Additional specification of finished size and edge thickness - Grain direction (structure) of the panel is taken into account - Stress-relief cuts are considered - Scrap definition possible - Post-optimization of individual processes possible HPO Stock - Allocated panels are deducted from the panel database, remnants are booked in. Remnant label is printed HPO Fleximport - Import possible for any ASCII text files into the HPO cut pattern optimization program MACHINE ALREADY DISMANTLED AND IN STORAGE!

Condition: used, Working width: 230 mm Working height: 120 mm Spindles: 5 Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / common motor with #2 / 40 mm Bwedpfx Abox Ecgujcjh Spindle 4: Top / 7.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Weinig Profimat 23 E four-sided planer and moulder for planing and profiling timber on all four sides, equipped with mobile spindle.

Condition: used, Year of construction: 2004, Feed length: max. 5,500 mm Saw blade diameter: max. 700 mm Cutting width: max. 700 mm Cutting height: max. 120 mm Bwsdox Eblvepfx Abceh Automatic optimizing cross-cut saw (push saw) Dimter type OptiCut 700 for cross-cutting very wide timbers according to defects (fluorescent chalk) and lengths.

Condition: used, Year of construction: 2022, Outfeed belt: 7.5 m Infeed thickness: 12 – 80 mm Infeed length: 400 - 6300 mm Marking station: 5,000 mm Saw blade ø: 500 mm Saw motor: 7.5 kW Control system: OptiCom Pro Cycles: approx. 1 sec Feed speed: max. 250 m/min Optimizing cross-cut saw Weinig type OptiCut 260 for automatic cross-cutting of timber based on defects (fluorescent chalk) and lengths. Bwodox Ditfjpfx Abcjh The separate measuring station records the lengths and marked defects.

Condition: used, Working width: 230 mm Working height: 120 mm Operation: PC control Nexus NC axes: Unimat 2 & 3, Uniplan 1 Spindle 1: 7.5 kW / 50 mm / 8,000 rpm Bwodpfx Abjx An R Tocjh Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2: 11 kW / 50 mm / 8,000 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 3: Shared motor with spindle 2 / 50 mm / 8,000 rpm Spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindles: 4 + 2 Feed rate: 5–24 m/min Planing line Weinig type Unimat 23 E + Uniplan 23 including return conveyor. A numerically controlled line for planing and profiling window scantlings, including glazing bead cutting or other planing tasks, with automatic return feed of the workpieces to the operator.

Condition: used, Planer table length: 2,500 mm Working width: 260 mm Working height: 160 mm Air cushion table: Yes Bodpfx Aoxzdwysbcswh Spindles: 7 Spindle 1: Bottom / 7.5 kW / 8,000 rpm Spindle 2: Right / 7.5 kW / 8,000 rpm Spindle 3: Left / 7.5 kW / 8,000 rpm Spindle 4: Right / 7.5 kW / 8,000 rpm Spindle 5: Top / 7.5 kW / 8,000 rpm Spindle 6: Top / 7.5 kW / 8,000 rpm Spindle 7: Bottom / 7.5 kW / 8,000 rpm Control: PowerCom Plus Feed rate: 30 m/min / 4 kW Weinig Powermat 500 planing and profiling machine for four-sided planing and profiling of timber with CNC control and Powerlock quick-change system.

Condition: used, Number of boring spindles 5 St. Bodpfx Aexu H R Ajbcowh

Condition: used, Roller conveyor: 250+360 cm Cutting width: max. approx. 600 mm Cutting height: max. approx. 120 mm Bwodpsxrtzpofx Abcoh Feed: Pneumatic Pfeiffer Piccolo pendulum saw with stable roller conveyor for cutting boards and beams. The machine is equipped with a pneumatic saw feed and secure two-hand operation. Video available upon request.

Condition: used, Powered feed rollers: Yes Working width: 250 mm Working height: 160 mm Spindle 1: Bottom (7.5 kW) Spindle 2: Right (11 kW) Spindle 3: Left (11 kW) Spindle 4: Top (15 kW) Spindle 5: Bottom (tba) Number of spindles: 5 Table plates: Resurfaced and recoated (hardened) Feed unit: 15 kW, hydraulic High-speed planing and moulding machine Weinig H25 for four-sided planing and profiling of green wood (fresh-sawn) The pictures show the current condition of the machine. Among other works, several original Weinig new parts have been installed, and the tables/fences have been resurfaced and recoated. Additional new parts are required for completion. These will be ordered according to customer specifications upon request. Bwedpsw R S T Ajfx Abcoh The control panel is temporary and for testing purposes only.