Used Scrap Baler for sale (599)

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, The BTS-MF100 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 100 kg. It is equipped with automatic bale cycle, hour counter and also strap eject system. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a Gujdpfx Anovaimhoxjb significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 6 Ton Bale weight: up to 100 kg (material depending) Bale size: 850 H (var.) x 980 W x 800 D mm Machine size: 2399 H x 1440 W x 1014 D mm Machine weight: 632 kg Transport height: 2399 / 1876 mm (on request) Loading aperture: 980 W x 480 H mm Cycle times: 28 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Hour counter Strap eject for easy removal of bales Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Clothes Light valuable materials Optional extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 450 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3000 H x 1781 W x 1196 D mm Machine weight: 1300 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 4 rolls of strapping Gjdpfxo Ib Exs Anxeub A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF75MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 75 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 75 kg (material depending) Bale size: 700 H (var.) x 700 W x 500 D mm Machine size: 2005 H x 2050 W x 872 D mm Machine weight: 562 kg Transport height: 2005 mm Loading aperture: 700 W x 500 H mm Godpfxjvugzrs Anxjub Cycle times: 35 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Power supply 380 - 400 V (3 phase) Twin Chamber Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: refurbished (used), functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Godpfx Anexl Rqboxeub Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: excellent (used), Year of construction: 2000, Diemer residual wood shear ASC 65 - 25 Guedpfswu Nwnsx Anxsb Infeed dimensions 650mm x 250mm with infeed vibrating trough

Condition: like new (used), Year of construction: 2024, operating hours: 2,000 h, functionality: fully functional, A nearly new scrap shear is for sale, which can be inspected in operation at any time. Gedjykzuijpfx Anxoub

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. Gedpfxsvq Rtks Anxjub - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: new, Year of construction: 2024, functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Blade length: 1600mm Output size: 500mm Power: 110 KW Guedpsr Ihzisfx Anxjb Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: refurbished (used), Year of construction: 2019, operating hours: 20,000 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap Shear MS-6300e (scrap shear with electric motor), supplied without operating fluids. Model: MS-6300e Cutting force: 630 t Cutting length: 1600 mm Discharge height: 600 mm Guedpfx Anjx Tp H Hexjb Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Function: Scrap is fed into the intake area using an excavator. Due to the horizontal loading area and the self-weight of the scrap, the material falls into the loading chamber and the cutting area. The scrap is compressed against the front wall and is cut by the horizontally moving tool carriage, pressing the material over the blades mounted on the front wall. While the tool carriage moves horizontally, the processed material is pushed out through the blades at the front end of the chamber. When returning to the rear position, the loaded scrap moves by gravity into the shear. The scrap shears are available in various configurations according to customer requirements, and the output size can be customized (with new orders). Inspection and test operation are possible.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, BONFIGLIOLI SQUALO 950 WITH NEW ENGINE! Gedjyg Hhtjpfx Anxsub

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Gusdpfxeyg Hcde Anxjb

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of Gedpfjvwlqqsx Anxjub 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 36290, cutting force: 650 t, overall weight: 62,080 kg, table length: 6,000 mm, table width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Performance and forces Shear force: 650 t Power consumption: 200 kW Working range Chamber length: 6,000 mm Closed chamber width: 781 mm Loading table dimensions: 6,000 x 2,500 mm MACHINE DETAILS Gedpfjw Nv Dijx Anxeub Weight including table: 62,080 kg Operating hours: 8,000 Note: The machine will be available from 01.03.2026.

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Gusdpjlhqd Rjfx Anxsb Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025

Year of construction: 2021, operating hours: 200 h, condition: like new (used), Amos Belt Press OPUS 1200 including fruit washer Amos ELE 280 N. The entire system is made of stainless steel, including the electrical control cabinet. Few operating hours. The unit is being sold due to the acquisition of a larger press system. Gsdowimqzepfx Anxeub

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 112010, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi The stated price is exclusive of statutory VAT, ex works, and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: Dixi Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340-500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Gusdpfx Anjwnpyvexob Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales / hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation site: indoor / covered outdoor Serial number: 112010 Year of manufacture: 2011 We refer to the respective original documentation, which can be obtained directly from the manufacturer.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 113889, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi The stated price is exclusive of statutory VAT, ex works and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: Dixi Gjdpfxjwnpx Es Anxsub Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340-500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales/hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation location: indoors / outdoors under cover Serial number: 113889 Year of construction: 2012 We point out the respective original documentation, which can be obtained directly from the manufacturer.

Condition: used, Year of construction: 2005, Chamber press - baling press Austropressen APV 300, used 🧰 Product features • Manufacturer: Austropressen • Model: APV 300 • Condition: Used item, see photos • Color: turquoise • Year of manufacture: 2005 • Dimensions: approx. 1620 x 1260 x 2920 mm • Own weight: 1650 kg • Pressing force: 300 kN • Cycle time: 45 seconds • Power: 5.5 kW • Voltage: 400 V (12.5 A) • Bale weight: 300 - 400 kg 💰 Price: €7,200 net excl. VAT • Quantity discount: on request • Shipping: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Gusdsxvy N Uspfx Anxjb Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock (Technical data, details, and prices subject to change and error, as well as prior sale! See our GTC, all prices excl. VAT ex stock.)

Condition: used, Year of construction: 2019, Chamber Press - Baling Press - Raw Material Press Bramidan X30 AD, used 🧰 Product Features • Manufacturer: Bramidan • Model: X30 AD • Condition: Used, see photos • Color: Orange • Year of manufacture: 2019 • Dimensions: approx. 1760 x 1255 x 2295 mm • Net weight: 1650 kg • Press force: 300 kN • Cycle time: 25 seconds • Power: 4 kW • Voltage: 3 x 230 - 440 V / 50/60 Hz • Noise level: 59 - 60 dB • Bale weight: Plastic up to 425 kg, cardboard up to 350 kg 💰 Price € 8,900 net excl. VAT Gsdoxvyn Depfx Anxjub • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by prior arrangement Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock (Subject to changes and errors in technical data, information and prices as well as prior sale! See our terms and conditions; all prices excl. VAT ex stock.)

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 400 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory VAT, ex works, and without packaging. The baler has been cleaned, function-tested, repaired, and fitted with a new control system according to EN16500 standards. All replacement parts used are original Strautmann components. Technical Details: - Manufacturer: Strautmann Umwelttechnik - Model: PP 1207 - Bale size (LxWxH): 1180 x 700 x 800 mm - External dimensions (LxWxH): 1838 x 1059 x 2871 mm - Transport height: 2050 mm - Feed opening: 1190 x 400 mm - Pressing force: 59 t / 580 kN - Throughput: 1 - 2 bales/hour - Number of strapping channels: 4 - Machine weight: 2,300 kg - Power supply: 400 V / 50 Hz - Power consumption: 4 kW - Installation location: Indoors / outdoor covered areas - Includes starter kit for 19 mm bale strapping Gjdpewq Ifvofx Anxjub - Year of manufacture: 2002

Year of construction: 2025, condition: used, Packaging machines, consisting of: 1x Rotary arm wrapper with top sheet applicator, type: B200E, manufacturer: TechnoWrapp 1x Ring wrapper, type: A800-4, manufacturer: TechnoWrapp 1x Rotary arm wrapper, type: CW 400E, manufacturer: CombiPack 1x Baler, type: BVP-950-HL1, manufacturer: Willems, Indion Gjdpfx Aowk Dv Denxsub Technical details, equipment, photos, and operating time are shown in the attached description.

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Gedpfsw Az E Tox Anxeub

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The indicated price is exclusive of statutory VAT, ex works, and without packaging. The press has been cleaned, function-tested, repaired, and fitted with a new control system in accordance with EN16500. All replacement parts used are genuine Strautmann original parts. Technical specifications: Gujdpfx Asv Rzwmonxob - Manufacturer: Strautmann Umwelttechnik - Model: PP 1207 - Bale size (LxWxH): 1180 x 700 x 800 mm - External dimensions (LxWxH): 1838 x 1059 x 2871 mm - Transport height: 2050 mm - Feed opening: 1190 x 600 mm - Pressing force: 59 t / 580 kN - Throughput: 1 - 2 bales per hour - Number of strapping channels: 4 - Press weight: 2,300 kg - Power supply: 400 V / 50 Hz - Power consumption: 4 kW - Installation location: indoors / outdoors under cover - Including start set of 19 mm baling tape - Serial number: 610.01.588 - Year of manufacture: 2005

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of VAT, ex works, and without packaging. The press has been cleaned, function-tested, repaired, and equipped with a new control system according to EN16500. All spare parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Model: PP 1207 Bale size (LxWxH): 1180 x 700 x 800 mm External dimensions (LxWxH): 1838 x 1059 x 2871 mm Transport height: 2050 mm Gujdpju Aa Tnjfx Anxjb Feed opening: 1190 x 400 mm Pressing force: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of strapping channels: 4 Weight of the press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation site: indoor / covered outdoor Includes starter set of bale strapping, 19 mm Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 620 mm, filling opening length: 1,000 mm, total width: 2,380 mm, total height: 2,500 mm, total length: 6,625 mm, Including feed belt. The machine is immediately ready for operation. Gjdpfx Ansvaw T Ajxjub