Used Screw Feeder for sale (7,396)

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Rbsdjwm Ih Aspfx Ag Tew Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Speed controlled. Space-saving. Inexpensive. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Rodpjixt I Hefx Ag Tsbw Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: new, AGRE ALUP SCK 10-10 270+ Belt driven. Space saving. Inexpensive. Easy operation. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Built-in refrigerant dryer. Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air cooled Drive: Efficient IE3 motor, belt drive Control: fixed speed Rbjdpjixt H Njfx Ag Tow Control: Aircontrol 5.0 Refrigerant dryer: attached, refrigerant R513A Filtration: incl. cyclone separator Tank: horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min operating pressure min. / max. 5,5 / 10,0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated power motor; IP55 7.5 kW Oil quantity 4 lt Dimensions and weight: L x W x H = 1530 x 662 x 1531mm weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 lt

Condition: new, Screw compressor AGRE Model Sonetteo 7,5+ 10 Screw compressor compact unit incl. refrigerant dryer and DL tank 270 lt. Belt driven. Space saving. Inexpensive. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and craft businesses. Rbsdpfohun Tzsx Ag Tow Convincing compressed air quality. Mounted refrigeration dryer. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Infologic² Basic control unit Refrigerant dryer: Mounted, refrigerant R513A Tank: 270 lt. horizontal painted 11 bar Motor power: 5,5 kW Pressure: 10 bar Delivery rate: 780 lt./min incl. time controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: new, feeder 4 rollers roller DM 120 mm roller width 60 mm motor power 0,75 kW motor speed 1.400 U/ min feeder speed 3 - 18 m/min, variable weight approx. 37 kg without stand optional with stand ‘standard’ or ‘stand 1050’ Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Redjh Dikwepfx Ag Tobw (We answer your inquiries only with stated address + telephone number!)

Condition: like new (used), Parts shown by hand not come. Rbsdpogvl Dnefx Ag Tsw

Condition: good (used), Year of construction: 1998, Baujahr 1998 Spindelstunden 52’000h Stangendurchlass 40mm Fanuc Series 18i-T Späneförderer Toolsetter integriert 12Stationen 1Spindel, X und Z Achse Rbedotth Hgspfx Ag Tow Kurzstangenlader Spannzangenfutter F48

Condition: like new (used), Year of construction: 2014, operating hours: 23,346 h, functionality: fully functional, Kaeser ASD50T screw compressor Redpfx Agjyxcxms Tsbw Integrated dryer. 25 kW 8.5 bar 4.58 m³/min

Condition: good (used), Year of construction: 1992, functionality: fully functional, type of input current: AC, overall weight: 120 kg, compressed air connection: 6 bar, power: 0.18 kW (0.24 HP), Rationator CS80 automatic disc dispenser, sorting machine Fully automated, variable dosing speed. Stainless steel. Rbjdpfoukha Dsx Ag Tsw Harness: Rationator CS850

Condition: excellent (used), From 2019, 15 kW, with container PM 32-E (32 m3) Redpfsyti Ipex Ag Tsbw

Condition: like new (used), Year of construction: 2024, operating hours: 1,500 h, functionality: fully functional, Atlas Copco compressor model G 5 FF with integrated dryer and 500-litre tank. Main specifications: max pressure 10 bar, power 5 kW (7.5 HP), air delivery 888 litres/min. New list price: EUR 9,300. Rbodpfx Agsyu Rl Es Tew

Condition: excellent (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Rjdpfshgq Ahjx Ag Tsbw Commissioning and testing available upon request. In stock

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW Rodsx Dkmgjpfx Ag Tobw • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Table Milling Machine TS110 Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000, and 10,000 rpm Left/right rotation, brake Redpfxev Im Swo Ag Tsbw Haffner 3-roller power feeder with 4 feed speeds Feed rollers new Transport available at additional cost!

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Rbedpfx Ajvyutgsg Tew of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), 5 pieces of hard base with screwed-on aluminum jaws, suitable for a FORKARDT chuck, 250 mm Ø 1 set of inwardly stepped jaws: 190 - 250 mm 1 set of inwardly stepped jaws: 120 - 200 mm 1 set of jaws stepped outwards: 220 mm 1 set of jaws stepped outwards: 100 - 250 mm 1 set of jaws stepped outwards: 120 - 300 mm Rbodpfxofxu Tyj Ag Tew 1 set of outwardly stepped jaws made of St: 120 - 260 mm 1 set of outwardly stepped jaws made of St: 140 - 240 mm

Year of construction: 1991, condition: used, machine/vehicle number: 149125/95, max. operating pressure: 8 bar Rsdpfx Agsby Hpbs Tobw Delivery rate: 2.51 m³/min Drive motor: 380/660 V, 15 kW Space requirement: 820 x 950 x 1200 mm high Weight: 360 kg Air vessel, make KAESER, year of construction 1999 Capacity: 1000 l max. operating pressure: 11 bar Space requirement: 800 Ø x 2300 mm high

Year of construction: 1990, condition: used, machine/vehicle number: 226794, Air Output: (8 bar) 2,05 m³/min Pressure: 8 bar Rodpfo E E Awox Ag Tjbw Motor: 15 kW

Condition: good (used), Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon head screws: M20, DIN 931 -Weight: 514 kg -Sizes/number: M20 x 45 to M20 x 100, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 534 kg M20 x 40 mm, galvanized, 4 packs of 25 pieces = 100 pieces M20 x 50 mm, galvanized, 12 packs of 25 pieces = 300 pieces M20 x 60 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 65 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 100 mm, galvanized, 19 packs of 25 pieces = 475 pieces M20 x 45 mm, black, 1 pack of 25 pieces = 25 pieces M20 x 50 mm, black, 8 packs of 25 pieces = 200 pieces Rbodpsiqpyqefx Ag Tew M20 x 90 mm, black, 5 packs of 25 pieces = 125 pieces

Condition: used, all stainless steel loading height : ± 1.000 mm diameter of the screw : ± 350 mm outfeed height ± 1.600 mm length of the screw : ± 3.100 mm dimensions hopper: ± 900 x 800 mm dimensions: (l x w x h): ± 3.200 x 900 x 2.300 mm Rbsdpfoyxnf Sjx Ag Tjw mobile

Condition: like new (used), Year of construction: 2017, operating hours: 30,195 h, functionality: fully functional, Screw compressor Atlas Copco ZT160VSDFF Inverter and dryer integrated. 160 kW 10.40 bar 24.20 m³/min Rbsdpfx Aeyvywzog Tew

Condition: excellent (used), Year of construction: 2018, overall weight: 170 kg, AERZEN D28L SCREW BLOWER STAGE 6 MONTHS WARRANTY Rodswiwg Topfx Ag Tebw

Condition: new, Year of construction: 2025, operating hours: 9,99,99,999 h, functionality: fully functional, machine/vehicle number: 1101, usable tank capacity: 86,000 l, water tank capacity: 86,000 l, Steel horizontal storage tanks are designed for the containment of water, oil, and petroleum products. They are available in capacities ranging from 3 m³ to 100 m³. These tanks are characterized by high strength and reliability, ensuring safe storage and transportation. The horizontal steel tanks we manufacture are engineered for efficient use in various industrial environments, including fire protection, the oil and gas industry, and the processing and storage of petroleum products. Rjdpfx Agoyr Axfs Tebw For straightforward classification and customs clearance, these tanks are assigned the following TN VED codes: 7309005100, 730900, 7309005900. This simplifies import and export procedures for these products and ensures compliance with international standards. When ordering these tanks, you receive the most suitable solution for storing water and petroleum products in capacities from 3 to 100 cubic meters. Such volume options fulfill the requirements of both small businesses and large industrial facilities. Our steel horizontal tanks provide reliable handling and protection of stored materials from external factors, which is especially important for volatile and potentially hazardous petroleum products. To order steel horizontal tanks with a volume from 3 to 100 m³ and to receive further information, please contact us. We are confident that our tanks will serve as a dependable solution for storing oil and petroleum products at your facility.

Condition: excellent (used), Step feeder TV Torres & Valente Width: 400 mm Price: 3000 PLN per unit Rbedeyrdtqopfx Ag Tsw

Condition: used, Vibrating feeder, vibrating track, vibrating parts feeder, linear vibrating feeder, RNA SLL400-400, Used machine Manufacturer: RNA Type: SLL400-400 Overall dimensions: Width: 675 mm Depth: 690 mm Height: 1600 mm Rsdpfx Ageyrti Io Tebw Electrical data: 230V; 0.60A; 120VA Hopper size: 500 x 495 mm Vibrating track size: 500 x 100 x 70 mm