Used Screw In Temperature Sensor for sale (27,877)

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator Bdsdpfx Aisznkx Dsroi If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN454I, unused -Item No.: 181300 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm Bsdszmducspfx Airsdi -Weight: 1.5 kg

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Bedpfx Ajy Ufk Rsirsdi Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: excellent (used), Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN444SI, unused Bjdpfozmdupex Airsdi -Item No.: 326737 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg

Condition: used, Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor, thermometer, temperature sensor control system -Manufacturer: SCS Stäfa, temperature sensor control system unused original packaging -Type FT-TH2 -Item no.: 0 873 80-03 -Measurement probe: Screw-in length approx. 75 mm -Dimensions cardboard: 155/80/H55 mm Bodpfx Aism Ui Iwsrjdi -Weight: 0.3 kg

Condition: used, Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor Bdjdpoirukuofx Airoi -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimension: 330/260/H140 mm -Weight: 1.3 kg

Condition: good (used), Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor, thermometer, temperature sensor control system -Temperature sensor: Temperature sensor -Type unfortunately without type designation -Temperature range: 20 - 80 °C -Measuring probe: Length 150 mm -Cable length: 8 m Bdsdpfxoqqpiro Airsi -Number: 18 temperature sensors available -Price: per piece -Dimensions: 200/180/H70 mm -Weight: 0.2 kg/pc.

Condition: used, Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: tmg, temperature sensor type VH54.9i301 -Item No.: 1012919 -Measuring range: -40 to 50°C -Number: 3x temperature sensors available -Price per piece Bdsdpfx Aeikbrmeirji -Dimension: 263/136/83mm -Weight: 0.6 kg/pc.

Condition: good (used), Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: Screw-in temperature sensor Bdodpfoiruilex Airsi -Measuring range: 0 to 160°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimensions: 330/260/H140 mm -Weight: 1.3 kg

Condition: excellent (used), Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor, thermometer, temperature sensor control system, temperature sensor, infrared temperature sensor -Manufacturer: Calex, infrared temperature sensor -Type PC21LT-0 -Item No.: OL 09584 -Transport dimensions: 120/60/H20 mm Bdjdpfxsxzpuqs Airji -Weight: 0.1 kg

Condition: used, This listing is for a Scilog SciTemp Single Use Temperature Sensor. The unit is in full working condition and is ready for immediate release. The Scilog SciTemp Temperature Sensor is an innovative, pre-calibrated, and single-use temperature sensing solution tailored for the biopharmaceutical manufacturing industry. It offers high-precision temperature monitoring in a compact and disposable format, making it an excellent choice for applications that demand reliability and ease of use. Key Features: Pre-Programmed with Unique ID: Each sensor is barcoded with a unique identifier, facilitating easy traceability and efficient data documentation when integrated with SciLog SciDoc software. Factory Calibration Data: Calibration information is stored on each sensor’s chip, ensuring out-of-the-box, plug-and-play functionality. This means you can start using the sensor immediately without additional setup. Bjdoxx Aauspfx Airsdi Temperature Range: Operates effectively within a temperature range of 4°C to 70°C, making it suitable for various biopharmaceutical processes. Gamma-Stable Memory Device: Each sensor features a gamma-stable memory device that securely stores all calibration and sensor-specific information, ensuring data integrity over time. Multiple Sizes Available: Offered in five different sizes to accommodate various applications and tubing configurations. Advantages: Single-Use Design: The convenient single-use format eliminates the need for cleaning and sterilization, significantly reducing preparation time and the risk of contamination. Ease of Use: With pre-calibrated and pre-programmed features, the sensor is straightforward to deploy, minimizing training requirements and operational complexity. High-Precision Measurement: Ensures accurate temperature data documentation, crucial for compliance and quality assurance in biopharmaceutical manufacturing. Time and Resource Efficiency: The plug-and-play functionality saves valuable time and resources, allowing for quicker implementation in fast-paced environments. Scalable Design: Accommodates various tubing sizes, providing flexibility for different processes and setups.

Year of construction: 2011, condition: used, machine/vehicle number: 6151656900, Used Desoutter ERS12 electric screwdriver with integrated sensor with connection cable fully functional without any additional accessories Item.No.: 6151656900 suitable for Desoutter CVIR II - screw control Output: Hex 1/4F" Torque: Min.: 1.5 Nm Max.: 12 Nm Bdsdpfx Aevtf R Aoirji Idle speed: 950 rpm Weight: 0.7kg

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Bjdpfx Aeyy U Sheirodi Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Bdodpfx Ae Ahhdaeirei FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Colour: Red Field of application: Mining Take your material processing capabilities to the next level with Polygonmach’s Fine Material Washer. Known for their engineering excellence and innovative solutions, Polygonmach has yet again pushed the boundaries with their advanced Spiral Classificator and Screw Washer. Designed for maximum efficiency and performance, this system offers an unmatched processing solution for a variety of materials. The Polygonmach Fine Material Washer, also known as Spiral Classificator or Screw Washer, is a powerful tool for sand classification and dewatering duties. It is specially designed for washing, classifying, and dewatering fine material as well as for scrubbing and expelling clays and silts from raw materials. The design offers a high level of cleaning, improving the quality of your end product. While it is mainly used for cleaning and handling of sand and gravel, it also works with many other minerals. When you need the highest level of cleaning, this washer is your go-to solution. Bdjdpjx D A Dwjfx Airoi The Polygonmach Fine Material Washer's superior design ensures optimal performance. It features replaceable, wear-resistant paddles that enhance the machine’s longevity. The system also comes with an adjustable weir and water volume to meet your specific washing needs. To achieve the desired results, the Polygonmach Fine Material Washer is equipped with a heavy-duty design and construction. It is highly efficient, delivering precision, and accuracy in its operations. Despite its robust construction, it is easy to maintain and has low operational costs.

Year of construction: 2014, operating hours: 7 h, condition: used, machine/vehicle number: 6151654560, Used Desoutter ECS4-M20 electric screwdriver with connection cable fully functional without any additional accessories Item.No.: 6151654560 suitable for Desoutter CVIC II - L2 and CVIC II - H2 - screw control Output: Hex 1/4F" Torque: Min.: 1.0 Nm Max.: 4.0 Nm Bdodpfxjvxu Dvs Airoi Idle speed: 2000 rpm Weight: 0.6kg

Condition: used, Temperature controller, temperature sensor, setting for temperature -Type: QAE2120.015 -Passive sensors for recording the water temperature in pipes and containers. The sensors are used in ventilation and air conditioning systems for: -Regulation and limitation of the flow temperature -Limitation of the return temperature -Control of the hot water temperature -Immersion length: 150 mm -Immersion temperature sensor with protective tube -Technical specifications: -hreaded nipple: G1/2A, PN10 -Degree of protection: IP 42 IP 54 with cable gland -Measuring element: Ni 1000 Ohm Bjdpfjb H Ebdox Airjdi -Application range: -30...+130 °C -Connection: 2-wire -Weight: 0.3 kg

Condition: used, Duct sensor for rel. Humidity/temp. 2 x 0...10 V Bedpfx Aisb H Ebfersdi -Type: QFM2160 for duct installation with mounting flange. -Technical specifications: -Measuring element temperature: active -Measuring element humidity: capacitive humidity sensor -Operating voltage: 24 VAC 13.5...35 VDC -Power consumption:

Condition: used, Duct sensor for rel. Humidity/temp. 2 x 0...10 V -Type: QFM3160 for duct installation with mounting flange. -Technical specifications: Bsdpfx Aisb H Ebgsrsdi -Measuring element temperature: active -Measuring element humidity: capacitive humidity sensor -Operating voltage: 24 VAC 13.5...35 VDC -Power consumption:

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Bsdpfx Aioh Uyg Nerodi

Condition: good (used), Temperature controller, temperature sensor, temperature setting -Type: Pt 100 Din -1 package, contents 10 pieces Bjdjb A S Dtepfx Airodi -Weight: 0.8 kg

Condition: good (used), Temperature controller, temperature sensor, temperature setting -Type: 237 Price: per piece -Number: 28 available -Weight: 0.5 kg Bsdpsb A Slyefx Airsdi

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 4743, New S-DAI Industrial Zipper Sealing with In-Line Folding Machine Industrial film-processing system manufactured by S-DAI Industrial Co., Ltd., Taiwan, designed to combine film handling/folding with zipper feeding, positioning and sealing in an integrated machine. The equipment is new/unused. Original machine drawings, manuals and supporting technical documentation are available. Folding Section 2 HP AC servo-driven material unwind Dancing roller Unwind-diameter monitoring Laser sensor Controlled web handling and folding system Zipper Sealing Section V-board moving device EPC (Edge Position Controller) Air shaft PLC control box Motor-driven zipper unwind Dancing rollers for zipper and material Zipper sealing device with cooling 2 thermal/temperature controllers Infeed rubber roller with 1/2 HP motor Bedpfxjz Aak Ee Airjdi Nip roller with 1/2 HP motor Electronic controller Material-empty and zipper-empty warning signals Machine start/stop signals Zipper tape unwind gear ratio: 10:1 Additional Unwind / Tension-Control Equipment Extra unwind air shaft Low-tension unwind system 1/2 HP infeed motor and inverter Infeed roller SICK ultrasonic diameter monitoring Dancing roller 2 guider-roller sets Distance-checking laser Associated program design Condition: NEW / UNUSED Documentation: Original drawings, manuals and supporting technical documents available.

Condition: like new (used), Year of construction: 1998, operating hours: 13,929 h, functionality: fully functional, overall weight: 2,400 kg, fuel type: electric, volume flow: 1.254 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, type of cooling: air, screw compressor TAMROTOR 110kW 7,5 bar 20,9m3/min Manufacturer: Garden Denver TAMROTOR Type: M110/7.5 EANA Air delivery: 20.9m3/min Year of manufacture: 1998 operating pressure: 7.5 bar Bdodpfjty Nkwjx Airji Engine power: 110 kW Revolution: 3453/min Network: 50 Hz 400 V Maximum operating temperature: 115°C Weight: approx. 2400 kg

Condition: new, Year of construction: 2026, SJSZ 51/105 Conical Twin-Screw Extruder Industrial Twin-Screw Extruder for PVC Processing The SJSZ 51/105 conical twin-screw extruder is designed for continuous processing of PVC materials and the production of rigid PVC profiles, pipes and other extruded products. The extruder features a bimetallic screw and barrel assembly made of nitrided 38CrMoAlA steel, providing high wear resistance and stable extrusion performance. The machine is equipped with a 22 kW three-phase asynchronous motor with forced cooling, a DELTA variable frequency drive, OMRON temperature controllers, and Schneider electrical components. The extruder includes an automatic material feeding system, vacuum degassing, air-cooled barrel heating zones, and an electrical control cabinet. 1. General Technical Specifications • Model: SJSZ 51/105 • Type: Conical twin-screw extruder • Processing Material: PVC • Production Capacity: 50–120 kg/h, depending on material and operating conditions • Main Motor Power: 22 kW Bdedpfez Nmfbsx Airei • Motor Type: Three-phase asynchronous motor with forced cooling • Motor Speed Control: DELTA frequency inverter • Power Supply: 380 V, 3-phase, 50 Hz 2. Screw & Barrel • Screw Diameter: 51/105 mm • Screw Length: 1085 mm • Screw Speed: 1–34.8 rpm • Screw & Barrel Material: 38CrMoAlA, nitrided • Screw & Barrel Design: Bimetallic • Nitriding Depth: 0.4–0.7 mm • Nitriding Hardness: ≥940 HV • Surface Roughness: Ra 0.4 μm • Bimetallic Layer Hardness: HRC 55–62 3. Heating & Cooling System • Barrel Heating Power: 12 kW 4 zones • Heating Zones: 10 • Heating Elements: Cast aluminum heaters • Barrel Cooling: Forced air cooling 3 zones • Temperature Controllers: OMRON 4. Gearbox • Gear & Shaft Material: High-strength alloy steel • Gear Treatment: Carburized, quenched and ground • Gear Hardness: HRC 54–62 • Gear Precision: Grade 6 • Screw Protection: Automatic screw displacement alarm 5. Feeding & Vacuum Degassing • Feeding Motor Power: 0.75 kW • Feeding Speed Control: DELTA frequency inverter • Feeding Operation: Independent or synchronized with extrusion • Vacuum Degassing Pump: 2.2 kW 6. Control & Electrical Components • Main Motor: 22 kW • Motor Cooling: Forced cooling • Main Frequency Inverter: DELTA • Temperature Controllers: OMRON • AC Contactors: Schneider • Electrical Control Cabinet: Included