Used Screw In Temperature Sensor for sale (27,866)

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Drive motor protection class IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Bjdpfxjvk R Dcs Ahdslp Location: from stock 54634 Bitburg - available immediately -

Year of construction: 2014, operating hours: 7 h, condition: used, machine/vehicle number: 6151654560, Used Desoutter ECS4-M20 electric screwdriver with connection cable fully functional without any additional accessories Item.No.: 6151654560 suitable for Desoutter CVIC II - L2 and CVIC II - H2 - screw control Output: Hex 1/4F" Torque: Min.: 1.0 Nm Bledpfx Aovxu Dvohdsp Max.: 4.0 Nm Idle speed: 2000 rpm Weight: 0.6kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cooling capacity: 500 kW (679.81 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,224 kg, input voltage: 400 V, total width: 2,200 mm, total length: 4,800 mm, total height: 2,600 mm, input frequency: 50 Hz, Equipment: compressor, cooling unit, type plate available, AERMEC NS2352X - Air-Cooled Screw Chiller, 500 kW, 2x BITZER / CAREL Ready-to-run 500 kW air-cooled screw chiller from a single previous industrial installation. Inspected, function-tested and documented by Ozsayin - industrial refrigeration engineering since 1982. --- WHY THIS UNIT --- - 500 kW (430,000 kcal/h) in one package: one machine instead of two mid-range units, one set of connections, one control point. - 2 x BITZER CSH8563-90Y-40P semi-hermetic twin-screw compressors. Worldwide parts availability, fully rebuildable - no proprietary dead end, no obsolete-compressor risk. - Shell & tube evaporator: serviceable, cleanable and re-tubeable, unlike brazed-plate exchangers that are scrapped once fouled. - CAREL controller with open protocol - straightforward BMS integration. - Two independent refrigeration circuits: stable part-load operation and built-in redundancy for critical processes. - Available in days, not the 20-30 week lead time of a new machine. --- TECHNICAL DATA --- Manufacturer / Model: AERMEC NS2352X Year of construction: 2012 Cooling capacity: 500 kW (430,000 kcal/h) Compressors: 2 x BITZER CSH8563-90Y-40P, semi-hermetic twin-screw Refrigeration circuits: 2, independent Evaporator: shell & tube Condenser: copper tube / aluminium fin Fans: 8 x axial Control system: CAREL Blsdpfxjl Dqtwe Ahdop Power supply: 400 V / 3 ph / 50 Hz Dimensions (W x L x H): 2,200 x 4,800 x 2,600 mm Weight: 3,224 kg Condition: excellent (used), fully functional --- SCOPE OF SUPPLY --- Included: technical inspection and function test before dispatch, photo and test documentation on request, loading onto truck ex works Adana. On request: full refurbishment (compressor overhaul, coil cleaning, new refrigerant charge, control retrofit, industrial repainting); on-site commissioning by our own engineers in Turkey and the EU; 12-month warranty package; spare parts and long-term service from our own compressor workshop. RENTAL: this unit is also available for short or long-term hire - seasonal peaks, plant shutdowns or standby capacity. --- DELIVERY & EXPORT --- Ex works Adana, Turkey. Road freight to any EU destination arranged on request. Full export documentation (A.TR / EUR.1) provided - under the Turkey-EU Customs Union there is no import duty for EU buyers. --- ABOUT OZSAYIN --- Building, refurbishing and servicing industrial refrigeration since 1982. Sales office Istanbul, production and workshop Adana, European operations Tallinn/Estonia. Chillers, screw compressors, process cooling and heat exchanger engineering. --- NEXT STEP --- Price on request. Send us your duty point - chilled water in/out temperature, ambient temperature and flow rate - and we will confirm the actual capacity of this machine at YOUR conditions within one working day, together with a firm price and delivery time.

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Bedpjvk R A Sefx Ahdjlp Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) Bsdozdn T Rjpfx Ahdjlp We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2006, Main areas of application: Animal feed industry: Production of high-quality sinking or floating fish feed and pet food. Food industry: Processing of cereals, protein concentrates and structured food ingredients. The Kahl LTW 160 twin screw extruder is a high-performance industrial machine from the German manufacturer Amandus Kahl, primarily used for mixing, kneading, cooking, and shaping viscous materials (such as animal feed, fish feed, or food components). The machine is characterized by its modular design and integration into complete, turnkey production lines. Format: Screw diameter (??): 160 mm Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, Blodpfxovfxqyj Ahdop 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: as good as new (ex-display), functionality: fully functional, Surface grinder. Taiwanese machinein new condition. IT has been a demonstration machine, has run a few hours. Standard accessories: Grinding wheel Wheel flange Flange extractor Wheel balancing arbor Wheel balancing base Wheel dresser with diamond Leveling screw & plates Tool box & tools Manual Optional accessories: 3 HP Spindle motor (siemen brand) instead of 2 HP Longitudinal by sensor & solenoid valve Electro magnetic chuck, 150 x 450 mm (Fine pole) Coolant system (Capacity 52L, 1/8 HP) Auto crossing stroke adjustment Bjdpfjm Tv U Tex Ahdolp Crisscross grinding Power rapid up/down system (AC motor, 1/5 HP) Wheel flange (extra) Back water splash shield Led lamp instead of halogen lamp Spindle motor inverter 3 HP (Taiwan made) Digital readout (lu, cross: 300 mm + vertical: 450 mm; 2 axes monitor) Auto. demagnetizer for chuck 5A If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Colour: Red Field of application: Mining Take your material processing capabilities to the next level with Polygonmach’s Fine Material Washer. Known for their engineering excellence and innovative solutions, Polygonmach has yet again pushed the boundaries with their advanced Spiral Classificator and Screw Washer. Designed for maximum efficiency and performance, this system offers an unmatched processing solution for a variety of materials. The Polygonmach Fine Material Washer, also known as Spiral Classificator or Screw Washer, is a powerful tool for sand classification and dewatering duties. It is specially designed for washing, classifying, and dewatering fine material as well as for scrubbing and expelling clays and silts from raw materials. The design offers a high level of cleaning, improving the quality of your end product. While it is mainly used for cleaning and handling of sand and gravel, it also works with many other minerals. When you need the highest level of cleaning, this washer is your go-to solution. Bljdpfxjx D A Dwj Ahdsp The Polygonmach Fine Material Washer's superior design ensures optimal performance. It features replaceable, wear-resistant paddles that enhance the machine’s longevity. The system also comes with an adjustable weir and water volume to meet your specific washing needs. To achieve the desired results, the Polygonmach Fine Material Washer is equipped with a heavy-duty design and construction. It is highly efficient, delivering precision, and accuracy in its operations. Despite its robust construction, it is easy to maintain and has low operational costs.

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Blodpfx Ahoh Uyg Njdop

Condition: new, Year of construction: 2026, KAESER screw compressor Aircenter SM 13-11 SC3 Compact compressed air station with 1.08 m³/min at 10 bar (max. 11 bar) and 7.5 kW motor output – including refrigerant dryer, 270 L tank, and new SC3 control system. Special price: 10,750.00 EUR net plus VAT Max. overpressure (bar) 11 Blsdpfxez I Epbs Ahdsp Volume flow rate at overpressure (m³/min) 1.08 Rated power of drive motor (kW) 7.5 Efficiency class of drive motor IE4 Permissible pressure loss of cooling channel (Pa) 30 Max. usable warm air volume (m³/h) 2100 Max. usable heat output "warm air" (kW) 9.1 Required air intake opening (m²) 0.3 Protection class of drive motor IP55 Electrical supply 400 V / 3 Ph / 50 Hz Full load current 19 A Fuse: Max. current 25 A Coolant capacity (l) 4 Width (mm) 630 Depth (mm) 1220 Height (mm) 1720 Weight (kg) 440 Volume of compressed air tank (liters) 270 Compressed air connection G 3/4 Sound pressure level (dbA) 65 Power consumption of refrigerant dryer (kW) 0.49 Dew point of refrigerant dryer (°C) 3 Pressure loss of refrigerant dryer (bar) 0.10 Refrigerant R-513A Refrigerant fill quantity (kg) 0.39 CO2 equivalent (t) 0.25 Global warming potential GWP 629 Model series - screw compressors SM | 5.5 - 9 kW | Industry Volume flow rate at overpressure (m³/min) 1.09 Max. overpressure (bar) 11 Rated power of drive motor (kW) 7.5 Efficiency class of drive motor IE4 Electrical supply 400V / 3 / 50Hz Protection class of drive motor IP 55 Sound pressure level (dbA) 65 Max. usable warm air volume (m³/h) 2100 Compressed air connection G 3/4 Coolant capacity (l) 4 Width (mm) 630 Depth (mm) 1220 Height (mm) 1720 Weight (kg) 440 Full load current 16 A Fuse: Max. current 20 A Pressure loss of refrigerant dryer (bar) 0.10 Dew point of refrigerant dryer (°C) 3 Refrigerant R-513A Refrigerant fill quantity (kg) 513 Global warming potential GWP 629 CO2 equivalent (t) 0.25 Volume of compressed air tank (liters) 270 Efficiency of drive motor (%) 91.7 Speed of drive motor (1/min) 2955 Electrical power consumption (kW) 9.8 Cooling oil type SIGMA FLUID MOL Ambient temperature (max./min.) 45 °C / 3 °C Location: in stock at 54634 Bitburg - immediately available -

Condition: like new (used), A large quantity of as new and unused high quality machine tool grade ballscrews for sale, all in their original packing. Great low prices, contact us if you are interested. You can check the spec with (for example) Google AI using the reference numbers given below. 1 Hiwin 423821003 645mm 2 NTN BS3212FF0852C3B 815mm 3 NSK W2803-651D-C3Z5 600mm 4 NTN BS3210FC1054C5B 1050mm 5 KOYO W2502-544Z-C3Z10 475mm 6 NSK W2803-440D-C3Z5 525 mm 7 SUBAKI 31TIFC6-750C3 760mm 8 NSK W3608 -182D-PZ10 1140mm 9 Unidentified 1125mm 10 NSK W4004-116Z-C3Z8 840mm 11 NSK W2504-401Z-C5Z 700mm 12 NSK W3203-238D-C3Z 640mm 13 NSK W4005-248Z-C3Z8 840mm Bljdpfxjy Tlnaj Ahdsp 14 KOYO 4010 TF(2.5) C51150H 1150mm 15 NSK W3608-182D-PZ 1130mm 16 NSK W3608-157-PZ10 1190mm 17 NSK NSK W3202-95Z-03Z 500mm 18 KOYO JG820 500mm 19 NSK W2802-117D-SPZ5 375mm 20 NSK W3606-211D-PZ10 900mm 21 NSK W4004-116Z-C3Z8 840mm 22 NSK W5008-254-C5Z10 1250mm 23 NSK W3206-1066D-C3Z10 950mm 24 NSK W3606-191D-PZ10 850mm 25 NSK W6324-20D-C5Z 3670mm 26 NSK W3620-30DE-PZ 2400mm 27 NSK 6334-6D 4650mm 28 NSK W6314-31D-C5Z 2680mm 29 NSK W3613-98D-C5Z 1800mm 30 NSK W5014-67D-C5Z 1800mm 31 NSK W3617-60D-C5Z 2230mm 32 NSK W3615 -51DE-PZ10 2130mm 33 NSK W3615 -51DE-PZ11 2130mm

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Bsdeyb Sdiopfx Ahdjlp Made in Germany Good working condition

Condition: ready for operation (used), Year of construction: 2018, A fully automatic side-seal strapping machine Joinpack is available. Load capacity: 50kg, speed: approx. 24rpm, strap width: 9mm/12mm/15mm, strap material: PP, strap tension range: 15kg/70kg, frame opening: 600mm/850mm, sealing height: 650mm. Machine dimensions X/Y/Z: approx. 1450mm/600mm/850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Bedpfsxvrvmox Ahdjlp

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: DB023401A, total length: 4,800 mm, total width: 1,345 mm, total height: 1,800 mm, type of input current: three-phase, input voltage: 400 V, working width: 300 mm, power: 6 kW (8.16 HP), control cabinet height: 2,200 mm, The Cefla All-in-One Wood Finishing Machine is an integrated solution for applying, distributing, and impregnating coatings on wooden floors. The machine combines a double roller applicator with two polishing brushes in a single, compact frame. The roller station can be used as a single applicator roller or in reverse configuration when the second station is activated. The polishing brushes are individually adjustable in terms of angle and speed, allowing the finishing process to be precisely tailored to the desired end result. Bedpfx Ahe Ahpldjdolp This machine is ideally suited for finishing wooden floors and other flat wooden products, combining the application of oil or varnish and polishing in a single, compact production line. The machine is suitable for processing oxidative oils and can also be used for suitable UV- and LED-curing oils when combined with additional UV or LED drying equipment. Operation is via a central control panel, which ensures clear and efficient control of multiple finishing steps from a single machine. This specific Cefla All-in-One Wood Finishing Machine is offered as a used machine. The machine has been technically inspected in our workshop and is supplied with used brushes and rollers.

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Bjdpfxo Aa Nauo Ahdelp Working area Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 200 mm Turning length: 650 mm Maximum turning diameter over bed cover: 200 mm Distance between centers: 750 mm Spindle Spindle head: Size 6 Spindle bore: 58 mm Control CNC path control: 2 axes Control system: Siemens SINUMERIK 5T Threading: available Motor control cabinet: Siemens 810T Tailstock Taper in tailstock quill: MK 4 Tailstock quill travel: max. 200 mm Tailstock travel: 550 mm Performance data Total power requirement: 18 kW Machine weight: approx. 2.7 t Machine dimensions Space requirement: approx. 2.70 × 1.58 × 1.68 m Control cabinet Control cabinet dimensions: 800 × 400 × 2,300 mm Control cabinet weight: 150 kg Motor control cabinet dimensions: 800 × 900 × 1,000 mm Motor control cabinet weight: 200 kg EQUIPMENT 4 chucks Spax screws Sheet metal screwdriver Drill Drill bits

Condition: used, Year of construction: 2009, machine/vehicle number: APF.142521, overall weight: 8,360 kg, total length: 4,320 mm, total width: 2,150 mm, total height: 2,520 mm, power: 400 kW (543.85 HP), TECHNICAL DETAILS Engine power: 400 kW Engine voltage: 6,000 V Operating pressure: max. 8.50 bar Delivery rate (FAD): 66.60 m³/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,320 x 2,150 x 2,520 mm Weight: 8,360 kg Bljdpe Ahgk Ejfx Ahdsp EQUIPMENT Water cooling

Condition: ready for operation (used), Milling head for Maho MH 800 C machine, without housing and with 1 sensor broken off, used, in good condition, 100% functional. Scope of delivery as shown in the photos. NOTE: Please request a separate quote for packaging and shipping costs! Bodpfj Aaxgwox Ahdslp

Condition: good (used), Zip Wire closed spiral in spools Blodpfx Asz N Sa Dehdop 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Forced convection oven, electric, France Etuves XXL08, year of manufacture 2023, 622 operating hours - Volume: 8000 liters - Max. temperature: 200°C - Internal dimensions (W x D x H): 2000 x 2000 x 2000 mm - External dimensions (W x D x H): 2559 x 2578 x 2665 mm - Fresh air intake and exhaust with adjustable damper - Exhaust fan Bsdpfxo Ahixzo Ahdolp - Safety thermostat - Double door - Heating power: 36 kW - Total power: 39.8 kW - Power supply: 400V, 3-phase, 50 Hz - Weight: 1300 kg - Documentation, CE declaration - Electrically tested and with current DGUV test report We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, forced convection oven, chamber oven, heating oven, chamber convection oven, annealing oven, tempering oven, convection chamber oven.

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Blsdpfxsx Hyfye Ahdep Weight: 1800 kg Engine power: 11 kW

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. Bledpfxs Afaugj Ahdjp both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Condition: used, functionality: fully functional, The ToolTemp TT 162-E temperature control units are for sale. The price is per unit. Medium: Water Heating capacity: 12 kW Cooling capacity: 35 kW Bjdpo Ahxwisfx Ahdelp Pump: 4 bar Control system: MP 888/MP 694

Condition: used, Year of construction: 2001, TECHNOLOGICAL LINE FOR MANUFACTURING ROOFING ELEMENTS 1. Profiling machine 2. Insulation element production system Bledpfx Ajyv E Aiehdep 3. AL foil preparation system 4. Gluing system 5. Auxiliary components, technical documentation, certificates Types of roofing panels produced on the technological line: - Roofing panels with modular dimensions 1100 mm x 1070 mm - Roofing panels with half-module dimensions 550 x 1070 mm - Roofing panels without anti-condensation layer in various lengths (up to 6 m)

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-R-CL laser through-beam line sensor 47/16 04079-R, used, in good condition, fully functional, scope of delivery as per photos. Bsdjx Eugpopfx Ahdjlp

Condition: ready for operation (used), Sensor Instruments L-LAS-TB-16x1-R-CL laser transmission line sensor 29/16 03819-R, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bsdpfsx Eugcox Ahdjlp