Used Screw In Temperature Sensor for sale (15,794)

Condition: excellent (used), Screw compressor Ecoair Type D40 Final pressure 10 bar Power 30 kW Dodpfx Aevu S Idjddowf Read operating hours 58403

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) Dsdjxzgn Ijpfx Addowf For further questions, feel free to contact us by phone.

Condition: used, Year of construction: 2003, Ingersoll Rand ML45 air compressor (2003), 2 units available. Condition: Used, technically sound, currently disconnected. Manufacturer: Ingersoll Rand (USA) Model: ML45 Year of manufacture: 2003 Quantity: 2 units Reliable industrial screw compressors designed for the stable supply of compressed air across various industries – manufacturing, metalworking, pneumatic tools, and automation systems. Key technical specifications (according to Ingersoll Rand ML45 catalogue): - Rated power: 45 kW - Air delivery: approx. 7.5–8.5 m³/min (depending on pressure) Dwsdpfxexu Ache Addjf - Working pressure: 7–10 bar - Compressor type: oil-lubricated screw - Drive: direct - Power supply: 400 V / 50 Hz - Cooling: air-cooled system - Noise level: approx. 72 dB(A) - Compressor weight: approx. 900 kg Condition description: Both units are currently disconnected but were operational prior to shutdown. Operating hour readings are unknown. Visually – in good technical condition, no damage.

Condition: good (used), Year of construction: 2016, High-quality oil-injected screw compressor. Manufacturer: KAESER Dsdpfx Ajxpffnsddjwf Model: CSDX 140 Operating overpressure: 13 bar Max. operating overpressure: 15 bar Operating capacity: 592 m3/h (9.86 m3/min) Motor power: 75 kW / 130 A (SIEMENS) Load hours counter: 23,100 h Dimensions: 2110 x 1290 x 1950 (h) Year of manufacture: 2016 Technical condition: used, fully functional machine.

Condition: ready for operation (used), Autotherm Heat • Climate • Cooling AWF 95-9– 9.7 kW – Made in Germany Djdpfx Adevgrr Tsdewf ● Pressure: 5.4 bar Model: AWF 95-9 ● Year of manufacture: 10/2004 ● Supply voltage: 400 V / 3 phases / 50 Hz ● Connected load: 9700 Watt ● Medium: water ● Total power requirement: 9.7 kW ● Amperes: 15 ● Pressure: 5.4 bar ● Device No.: 01 550 Complete unit with electronic control, mounted on transport wheels. Perfectly suited for use with injection moulding machines. Visual and technical condition very good.

Condition: used, Year of construction: 2010, machine/vehicle number: 106547, volume flow: 182 m³/h, operating pressure: 10 bar, power: 87 kW (118.29 HP), rotational speed (max.): 1,315 rpm, Bornemann pumps, type HC 180-68, pressure 10bar, 182.6 m3/hour. With ABB engines, type M3KP315, 132 kW, 232 A. Good condition, 4 pcs. available. Dwjdpfx Asvwmpboddof

Condition: excellent (used), Screw compressor KAESER Type AS 31 Djdpfx Adjvu S H Tsdowf Motor 18 kW 7.5 bar

Condition: like new (used), functionality: fully functional, power: 166 kW (225.70 HP), operating pressure: 10 bar, type of cooling: air, Atlas Copco GA160 oil-injected screw compressor, 166 kW, 10 bar, 2006. Unit is in very good technical and visual condition. Elektronikon® controller works properly, machine starts and stops normally, no visible oil leaks. Provides ~27–30 m³/min of compressed air at 10 bar. Ideal for: Manufacturing plants Wood industry (dryers, pellet mills, pneumatic lines) Transport and logistics centers Any industrial compressed-air system requiring 160+ kW capacity Specs: 166 kW, 10 bar, 1488 rpm, 400 V, ~27–30 m³/min. Atlas Copco GA160 (SOK-1) Industrial Screw Air Compressor – 166 kW Motor power 166 kW Working pressure 10 bar Free air delivery ~27–30 m³/min Rotational speed 1488 rpm Voltage / Frequency 400 V / 50 Hz Compressor type Oil-injected screw Cooling Air-cooled Controller Elektronikon® Condition Very good; dry, no visible oil leaks From images: Machine looks clean and well kept. Control panel powers ON and operates normally. No corrosion on main cabinet panels. Dedpfexy Nq Nex Addewf Piping and connections in good mechanical condition. INCLUDED ✔ Full noise-insulated enclosure ✔ Elektronikon® controller ✔ Condensate line ✔ Mounted air discharge piping ✔ Strong, clean cabinet covers ✔ Fully functional operating panel

Condition: new, Year of construction: 2025, THEOR 50 screw compressor equipped with an inverter from the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. Dwjdpfx Adsm Nb Tpodef Our company has been on the market for several years, we have extensive experience in the distribution of piston and screw compressors. As a European Manufacturer, we provide our clients with proven and recognized pneumatic solutions. Technical data Engine power 37 kW Voltage 400V/50Hz Air flow 5,6 m3/min Dimensions 1500 x 1000 x 1330 mm Weight 830 kg Most important advantages: INVERTER - The continuously variable compressor speed control system is the most economical control method. The most important advantage is lower energy consumption and maintaining a constant set pressure compared to conventional compressors hard, compact construction of screw compressor from the European producer specially designed cooling system ensures optimal working conditions even at high load of the device connection of the cooling system to the module through good quality hydraulic wires this technology allows significant energy saving special construction of air outlet for effective work efficient and solid pump installed in compressor unique filtration system with triple separation for effective work efficient motor with power 22 kW made in IP54 standard using a belt transmission, which ensures high effective efficiency lower noise of screw compressor thanks to apply specially designed soundproofed case (soundproofing plates) electronic controller from MAM series allow to set parameters: time between service inspections, power failure alarms, phase change, phase loss, overheating, other, work in Master / Slave mode, it is possible to connect up to 16 devices in the pneumatic network, possibility of remote control by means of a computer and other The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Double Sheet Control for Horizon VAC-100/VAC-60 Collator, pack of 10 sensor Optimize the precision of your Horizon VAC-100 or VAC-60 collating machine with our high-quality replacement double sheet control Compatible with Horizon VAC-100 and VAC-60 models Sensor for reliable double sheet control Ensures precise error detection and smooth operation Easy replacement for minimal downtime This sensor is an important component for quality assurance in your Horizon collator. It ensures that your machine continues to operate efficiently and precisely by reliably detecting double sheets and preventing faulty production. Dodpfjw Ewz Nsx Addjwf Invest in the accuracy and reliability of your print finishing. Order now and keep your Horizon VAC-100 or VAC-60 in top shape!

Year of construction: 2000, operating hours: 1,04,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Dwedpfx Ajx Exmteddef Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, The temperature control units – 4 units from Tool Temp with MP-888 controller – are available for sale, equipped with the following specifications: Medium: Water, up to max. 90°C Heating capacity: 3 kW & 6 kW = 9 kW, with adjustable stages Cooling capacity: 35 kW Pump capacity: 75 l/min, max: 4.5 bar Filling volume: 6 litres Dodpex Elbqofx Addswf Weight: 55 kg Dimensions: 670 mm x 260 mm x 650 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 31,796 h, functionality: fully functional, Kaeser SK22 screw compressor, 11 kW, 8 bar with 2 m³/min. Year of manufacture: 2015 Dwsdpfxsxxt Dwe Addef

Condition: excellent (used), Level sensor Make Endress Hauser Liquicap M Djdsmxi Ugopfx Addewf Stock number 28420 Order code FM /51-A1AGEJB3A1A Ser.No.F20231010FO L1 449 mm

Condition: excellent (used), Year of construction: 1999, Spiral Mixer Celba / Koenig - used - year of manufacture approx. 1999 - capacity approx. 125 kg dough - electronic control - 2 removable bowls - electronic control - very good technical condition - without warranty - collection from warehouse - price on request Dwedpfx Adsxzr E Sjdof

Condition: good (used), Year of construction: 2025, Tool Temp TT 157 E see photos Dwjdpfx Aexwukpsddof

Condition: new, Year of construction: 2025, A set containing THEOR 20 INVERTER screw compressor, N20S refrigeration air dryer. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: THEOR 20 COMPRESSOR with inverter (version equipped with inverter) REFRIGERATION AIR DRYER N20S Dodpfxomqlqde Addowf The set does not include a tank! Possibility to buy additional cylinders THEOR 20 COMPACT technical parameters Compressor Engine power 15kW Dehumidifier Engine power 0.69kW General parameters Capacity at 6 bar 1800 lpm Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Departure G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2011, functionality: fully functional, The temperature control units, 4 pieces, from Plasma are available for sale: Medium: Water Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function PT 100 sensor On/Off interface Dwjdex Ek Rdopfx Addef

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Dwedpfx Adjxykcgodjf Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Condition: good (used), Year of construction: 2001, Motor speed, Max. pressure: 10 bar, Motor speed: 3,500 rpm, Dwodpfoxx S N Esx Addof Motor power: 75 kW, Flow rate: 13.51 m³/min, Machine weight: 1,530 kg

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately - Dwjdpfx Adsvk R A Ssdef

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma "Primus" is for sale with the following technical specifications: Medium: Water Heating capacity: 9 kW Cooling capacity: 30 kW Special equipment: Reinforced pump K6 at 60 l/min, max. 6 bar PT 100 sensor Interface: On/Off Djdpfox Eg T Ejx Addowf Alarm

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Dwedpfx Adevk R Dcjdjf Drive motor protection class IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: from stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar tank capacity 270 l Air outlet ½ " UNIT 1 Dimensions and weights Length approx. 1200 mm width/depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Dodpfx Aofh Hahsddewf Electrical data Input power electric motor 7,5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Engine(s) Motor type Electric Location: From warehouse 54634 Bitburg - immediately available-

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 - 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Compressed air screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for use Max. Operating overpressure: 11,0 bar Dedpfx Adehy Tzyodewf Delivery volume: 0,75 m³/min Nominal motor power: 5,5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions WxDxH: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: Ex stock 54634 Bitburg - immediately available -