Used Screwdriver for sale (120)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Tsdpfx Aszhub Asirod Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, Pneumatic screwdriver, DESOUTTER Pneumatic screwdriver, rod screwdriver for screwing technology Type SD 140-AR510-S4Q Tedpfefgrrhex Airsd Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Air pressure required: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Rotary switch for right and left rotation (rotary ring control) - Without screwdriver shut-off - Pneumatic control line Ø 4 mm - Pneumatic connection for screwdriver function min. Ø 10 mm - Aluminum bracket for handling device - Screw feeder Ø 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension - Lübbering flat-head gearhead for tight/difficult-to-access screw locations • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) Todszzp Ttspfx Aired • Year of construction: 2005 • Machine no.: 0197/02 • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A • Operating pressure: 6 bar • Total weight: approx. 3,500 kg • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Year of construction: 2014, operating hours: 10 h, condition: as good as new (ex-display), machine/vehicle number: 6151656290, Desoutter Battery Angle Screwdriver shut off ELS15-480-A Demonstration tool Charger 230 V Ladegeraet + 2 Batterys (18 V 2,6 Ah) included Free speed: 200 to 480 rpm Torque Range: 44,2 in.lb till 133 in.lb Output drive: Sq. 3/8 Length: 16,5 in. Tjdpfxscr H Eas Airsd Weight (without Battery) : 2,6 lb.

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Tedpfxszc N H Dj Aired Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Condition: excellent (used), ///// PRICE INDICATED IS FOR 1 UNIT ///// For sale: a professional Bosch Rexroth industrial screwdriver designed for use in production lines and assembly stations. The device is characterized by high precision, durability, and the ability to operate continuously in industrial environments (automotive, mass production). Todpfxsz Smk Re Airjd The item is used. It shows normal signs of use but is in good technical condition. ⚙️ Available models (to choose from) 🔹 Rexroth ESA075G-G Torque: 75 Nm Speed: 530 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESV073-G Torque: 73 Nm Speed: 900 rpm Year of manufacture: 2020 Country of manufacture: Germany 🔹 Rexroth ESA150S-G Torque: 150 Nm Speed: 380 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESA013G-G Torque: 13 Nm Speed: 1000 rpm Year of manufacture: 2024 Country of manufacture: Slovenia 🔌 Common parameters Power supply: 3~230V Frequency: 0–250 Hz Power: 200W Manufacturer: Bosch Rexroth 📦 Included in the set ✔️ 1x screwdriver (selected model) ✔️ head (as shown in the picture – straight or angled) 📊 Condition Used – normal signs of use. Equipment in good technical condition. 🛠️ Application assembly lines automotive industry mass production precise tightening

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. Tedpfx Aiez E Sbrorod This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Tedsz Ic Nfspfx Airjd Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Condition: ready for operation (used), Year of construction: 2024, CMM machine manufactured in 2024. This Hexagon MARVEL 3D Scanner features multiple scanning modes, including Standard, Fine, and Edge Detection, with a measurement rate of up to 2,100,000 points per second. It offers a scanning area of up to 600 x 550 mm and a resolution of up to 0.02 mm. If you are looking to get high-quality scanning capabilities, consider the Hexagon MARVEL CMM machine we have for sale. Contact us for further details. • Measurement rate: • Standard / Single Line: 2,100,000 pts/s • Fine: 900,000 pts/s • Scanning area: up to 600 x 550 mm • Single Line mode width: 300 mm • Light source: 22 blue laser lines + 1 single blue laser line + 5 parallel blue laser lines • Resolution: up to 0.02 mm • Accuracy (with targets): • Volumetric (Standard): 0.02 + 0.04 mm/m • Volumetric with scale bar: 0.02 + 0.03 mm/m • Volumetric + photogrammetry: 0.02 + 0.02 mm/m • Hole accuracy: up to 0.03 mm • Hole volumetric accuracy: 0.03 + 0.04 mm/m • Target-free accuracy: • Volumetric (Standard): 0.05 + 0.02 mm/m • Hole volumetric accuracy: 0.06 + 0.02 mm/m • Built-in photogrammetry: • Volumetric accuracy: 0.020 mm/m • Average deviation: 0.007 mm • Depth of field: • General: 600–2500 mm • By mode: Standard/Single Line 450 mm; Fine 150 mm • Maximum DOF at furthest range: 550 mm • Stand-off distance: • Standard / Single Line: 300 mm • Fine: 150 mm • Recommended part size: 0.1–6 m • Physical / operating: • Weight: 1.3 kg • Dimensions: 300 x 150 x 75 mm • Connection: USB 3.0 • Working temperature: -10 to 40°C • IP rating: IP50 • Working humidity: 10–90% non-condensing • Export formats: .stl, .ply, .obj, .txt, .xyz, .asc • Customisable formats: Available • Compatible software: • Hexagon: Inspire, PC-DMIS, DESIGNER, Geomagic, BendingStudio XT • Third-party: PolyWorks, Metrologic, and other software importing point clouds or STL • Key features: • Built-in photogrammetry; target-free and dynamic scanning • Galaxy Mode; 3 main scan modes with on-the-fly switching • Hole Flash Capture; multi-size target recognition (3 / 6 / 12 / 16 mm) • Instant LED visual feedback Tjdez Df Rkopfx Airod • Wireless scanning capability • Large stand-off distance • Automation-ready for third-party integration • Combine data from different modes in one point cloud/mesh • Suitable for large or delicate components • Certifications: • Certified to VDI/VDE 2634-3 • Accuracy validation linked to an ISO 17025-certified laboratory • Typical applications / sectors: • Railway, general manufacturing, industrial equipment, automotive, marine, non-manufacturing applications • Quantity: 1 scannerAdditional equipment (accessories, not part of the base machine) • 3 mm positioning targets (ID), self-adhesive • Article code: B841-P007-A • Quantity included: 10 boxes; 1,000 pcs/box (approx. 10,000 pcs total) • 6 mm positioning targets (ID), self-adhesive • Article code: B841-P006-A • Quantity included: 10 boxes; 1,000 pcs/box (approx. 10,000 pcs total) • 6 mm magnetic cubic positioning targets (ID) • Article code: B841-P050-126-A • Quantity included: 1 box; 8 pcs/box • FREEBox-II Wireless Scanning Module • Function: 5G Wi‑Fi wireless transmission and processing of scanning data; increases operator freedom/flexibility • Package includes: • 1x FREEBox II wireless module with strap • 2x 1 m FREEBox II USB cables • 1x power adapter • 1x power cable • 1x FREEBox battery • 1x travel case • 1x screwdriver set • Packing list • Quick installation guide

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing applications Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tedefgpfmopfx Airjd Tool holder: 33 x 33 mm screw clamp - Movable in three axes (horizontal, vertical, rotational) - Rotary encoder KÜBLER for rotational movement, type 8.5873.5320.B311.S003 - Linear position sensor BALLUFF for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 balancer units for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - for virtually weightless suspension of small devices - Load capacity adjustable in stages - Constant tensile force Space requirement L x W x H: 770 x 310 x 1200 mm Weight: 19 kg Good condition

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Thorwesten PBZ3 machining center for optimized processing of profiles. The tool carousel enables variable angles for all tools. All machining operations – milling, drilling, and screwing – are performed in a single pass. A dynamic screwdriver reduces processing times. Tedpfxezfvf Re Airjd

Condition: used, functionality: fully functional, USED MILLING MACHINE WITH HIGH-SPEED HEAD FIRST ISO30. WITH HOOK/PNEUMATIC RELEASE SCREWDRIVER AND AUTOMATIC GUIDE LUBRICATION SYSTEM. Tsdpfx Aozht Nlsirsd

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine Todpfx Aex R Df Soired   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Year of construction: 2007, condition: ready for operation (used), A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only. Tjdpfezi Eimex Airjd

Year of construction: 2017, condition: used, Manufacturer : Transvis Type: Semi-automatic cap screwdriver Tedpfxsy H Rfqj Aired Application: screwing / capping Year: 2017 Maximum product dimensions: Ø 54.5 x 82 mm Minimum product dimensions: Ø 45.5 x 68 mm Product weight: 90–150 g HMI control panel Asynchronous motor power: 0.18 kW Two-hand control Torque control Overall dimensions: 650 x 1000 x 1800 Screw capper dimensions: 650 x 935 x 990 Weight : 100 kg Spare parts and formats available Power supply: 220V single-phase / 6 bar compressed air Technical documentation available Video available in running condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing operations Type: Handy-flex 200 Horizontal movement: 300 mm Vertical movement: 370 mm Load capacity: 10 to 14 kg Outreach: 250 to 550 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: Ø 26 mm oval with screw clamp - Movable in three axes (horizontal, vertical, rotational) - 1 unit balancer for vertical movement TECHNA, Type 9340, adjustment range 10 to 14 kg - Adjustable locking pawl for vertical movement, manual release via Bowden cable - For weightless suspension of small devices Tedpfsfx Hxzsx Airod - Load capacity adjustable - Constant tensile force Space requirement L x W x H: 880 x 500 x 1120 mm Weight: 23 kg Good condition

Year of construction: 2010, operating hours: 75 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 08/2010 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) Tedpfsvxux Hex Airjd - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Tedpjtuzqpsfx Airsd Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Location: 54595 Prüm

Condition: used, Year of construction: 2024, Manufacturer : Transvis Model : TR7 Year : 2024 Type: All-in-one unit: dosing, filling and capping machine rotary table with indexing mechanism Hopper / Feed tank Automated dosing system Blow/suction station Filling station Screwdriving station Capping station Ejection station Outfeed conveyor Three operator stations for manual loading / feeding of the machine. HMI with Omron PLC Dimensions maximales du produit pouvant être utilisé: Ø 50 mm x hauteur 160 mm Volume mini / maxi pouvant être dosé : 1 mL/ 500 mL (selon pistons) Cadence maximale: 30 coups /mn. Tjdpfx Aeyxr Uwsirsd Technical documentation available.

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 7) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 8) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 9) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward Tjdpfeywkc Rox Airod 10) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 11) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Tsdpfsxf Up Usx Aired Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Year of construction: 2000, Pneumatic clamps to immobilize chairs while the operator performs operations, for example via screwdriver or similar Tjdoydb Hxspfx Airjd Working dimensions: cm. 50x60

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) Tjdpfx Asvtf Aroired - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Tjdpfeym Ih Ujx Airsd

Condition: used, Year of construction: 2018, 0 ja Working width 3000 mm 0 nein Eder + Mueller fitting centre for windows ----- Sale on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturer's description: Tjdpfx Aijxmamujred ----- Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Manual insertion for a second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.