Used Scroll Saw for sale (5,695)

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Dodpfxjxg Hane Aa Nsut Pneumatic material clamps 3 operating modes

Condition: excellent (used), Year of construction: 2002, Bandsaw automatic machine, make KLAEGER HBA325, year 2002, in very good condition. Cutting capacity round max. 325 mm Equipped with coolant system and coolant mist spray device, machine documentation available. For further technical data, please refer to the data sheet. Duedpfxey Rgcae Aa Not

Condition: excellent (used), KASTO HBA 420AU Bandsaw Gantry type Automatic Cutting diameter: 420 mm Single material feed: 600 mm Multiple feed: x9 Duedpjxxht Hjfx Aa Nst Coolant pump Documentation Weight: 3,400 kg Net Transport possible to any location in the country Feed table Machine in perfect technical condition!

Condition: used, Cutting height ~ 80 mm Chain width 300 mm weight ~ 1.200 kg Duedpfey N D R Sox Aa Net Compact Maka type V 250 J multirip saw for ripping and trimming wood with several saw blades. Including dismantling and loading. Fixed loading date: 15.06.2026.

Year of construction: 1992, condition: good (used), Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine -Manufacturer: Alfred E.Gohl, glass bead saw type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW -Speed: 3000 rpm -Dimensions: 1100/650/H1350 mm -Weight: 152 kg Dedpfx Aaeif Azfs Nsut

Condition: used, Year of construction: 1997, dimensions of saw-band 3150 x 25,4 x 0,9 mm 20/40 m/min capacity 90 degrees: round 260 mm capacity 90 degrees: square 250 mm capacity 90 degrees: flat 320 x 200 mm capacity 45 degrees: round 230 mm Dusdpjyyc A Iefx Aa Njt capacity 45 degrees: square 210 mm capacity 45 degrees: flat 240 x 200 mm

Year of construction: 1980, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm -Sliding carriage: is available Dusdpfxsf D H Hbj Aa Nst -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

Condition: excellent (used), functionality: fully functional, CML J250 Multi-Blade Saw Track width: 250 mm Maximum distance between outer saw blades: 220 mm Cutting height: 80 mm Dujdpfx Aaoy Ewtlj Nst Main motor power: 18.5 kW Maximum saw blade size: 300 mm Feed speed adjustable Extraction port Ø 200 mm CE certificate

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 1750 kg sawing motor: 2,2 kW total power requirement: 5 kW cutting speed: 17 - 90 m/min cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual, * Dodpovpt Eyjfx Aa Nout

Condition: excellent (used), Panel Saw HOLZ-HER 1255 SECTOR pro – used – • Welded frame with extremely high rigidity • Pneumatically retractable support grid • Sturdy saw carriage latching mechanism at top and bottom • Electrically monitored latching in vertical cutting mode • Foldable plunge lever on the saw unit Duodpoy N Rihsfx Aa Nst • Retractable riving knife for cut-outs • Operator control panel at eye level • Digital display on longitudinal fence • Digital display for horizontal cut • Strip cutting device • Lift roller transport system • Trimmable support table • TRK extraction unit • Dust tested • Only used for 2 months ----- Technical Data ----- Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 60 mm Saw blade Ø: 250 mm Motor: 4 kW Extraction port Ø: 120 +100 mm Compressed air: 8 bar Year of manufacture: 2025 Quality info: - Complete basic inspection - Complete basic cleaning - Ready for immediate use

Condition: used, Cutting length 6.100 mm Dsdpfey Nn Dcjx Aa Njut length ~ 7.260 mm width ~ 1.230 mm mm height ~ 1.550 mm mm Veneer saw or jointing and fine-cutting machine Scheer FM6-6100A for sawing veneer or other thin panels with automatic feed and integrated suction.

Condition: used, Year of construction: 2001, max. cutting width: 5300 mm max. cutting height: 2200 mm Dodpfx Aey I Dfgea Neut saw blade diameter: 300 mm max. processing thickness: 80 mm saw blade bore: 30 mm lower support: fixed rollers material support: closed wooden support digital measuring system saw head tilting: manual extraction: external extraction saw beam locking: manual weight approx.: 1500 kg dimensions: 6300 x 1500 x 2900 mm motor power: 5.5 kW Storage location: Supplier

Condition: used, Year of construction: 2002, Max. cutting width: 4300 mm, max. cutting height: 2200 mm, saw blade diameter: 300 mm, max. processing thickness: 80 mm, saw blade bore: 30 mm, measurement system: scale, saw head tilting: manual, saw feed: manual, extraction: external extraction, saw beam locking: manual, weight approx.: 1200 kg, dimensions: 5300 x 1200 x 2900 mm, motor power: 5.5 kW. Storage location: supplier. Dodpfx Aasy I Dd Aj Njut

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Dodpjy Ni Ayjfx Aa Neut

Condition: new, 0 3350 mm Working height bei 90° = 180 mm 0 45°/90°/45° 0 Dodpfx Aaoy I Dclo Nsut Cutting height at 45° 140 mm

Condition: new, mm Dujdpfx Aaey I Dcfj Net Working height bei 90° = 315 mm 0 45°/90°/45° 0 weight 2050 kg Cutting height at 45° 230 mm

Condition: new, mm Working height bei 90° = 290 mm 0 45°/90°/45° 0 weight 1800 kg Dedpfx Aaoy I Db Uj Neut Cutting height at 45° 210 mm

Condition: used, machine/vehicle number: 008348, Max. panel width: 4300 mm Djdpfx Aaeyl Iiis Nout Max. panel length: 1600 mm Main saw blade projection: 125 mm No of Grippers: 5

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Fully automatic vertical machine, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Saw blade diameter 300 mm, Control for vertical and horizontal cuts, with ALU folding stops and ALU center support, Dodpox Rr D Aofx Aa Nsut with SUPER-CUT scoring unit Motor 3 kW - 400 V Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Dusdpfow Sy T Hox Aa Not

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Dedpfsyf Nu Tjx Aa Njut

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring Djdpsulnb Defx Aa Nout - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, total length: 7,500 mm, total width: 1,500 mm, total height: 2,000 mm, Technical data – Elumatec DG 244/2, year of manufacture 2008 Control unit model: E555 – touchscreen Technical advantages of the machine: Dodpfsyv E N Ajx Aa Njut - Saw blade diameter: 550 mm - Blade speed: 2800 rpm - Compressed air supply: 7 bar - Weight: 2300 kg The machine is fully operational and can be tested on site. Price includes loading. We can also assist with delivery to the specified address. The machine is located in Poland – 33350. Inspection possible by prior arrangement. Our company is situated 120 km from Kraków airport (KRK). Transport possible. Export price.

Condition: like new (used), Maximum material height: 50 mm Table dimensions: 800 x 600 cm Dujdpewixlwofx Aa Not Arm clearance: 109 cm Motor power: 0.75 kW Year of manufacture: 2000 Voltage: 380 V CE

Condition: excellent (used), HSS saw grinder SCHMIDT TEMPO model ECE45, 4 axis, diameter up to 630 mm Djdpfxey H Egcs Aa Njut