Used Scroll Saw for sale (5,705)

Condition: used, machine/vehicle number: 008392, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 127 mm No of Grippers: 9 Panel Rotation Station: yes Fjdpox Swb Njfx Aa Nepg Thin sheet loading: yes Vacuum sheet loading: yes

Condition: used, machine/vehicle number: 005106, Max. panel width: 4300 mm Fpodjyg Edmepfx Aa Neg Max. panel length: 4250 mm Main saw blade projection: 95 mm

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Equipment and technical data: Cutting length: 2800 mm Cutting width: 1300 mm Format cuts: 2800 x 2800 mm Vertical cutting height: 0–75 mm Cutting height at 45°: 0–53 mm Crosscut length with scale at mitre fence: 2800 mm Motor: 4 kW Speed: 4200 rpm Saw shaft: 30 mm Saw blade diameter min./max.: 300/315 mm Extension table: 540 mm Fpjdpfxsxrhh Rj Aa Nog Anodized design Tiltable up to 45° Digital tilt angle display Prepared for scoring unit Including mitre fence Including sliding carriage handle Dimensions: 2800 x 1600 x 1500 mm Weight: approx. 880 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Fpedpfx Aey Nugdsa Nsg Special SCM guide system for the saw carriage. The curved design between the ball bearings and running guides, as well as the hardened contact surfaces, ensure exceptional and consistent precision. The scoring unit can be easily swung in and out from the outside; a special plate enables precise positioning. The rip fence is extremely robust and can be used for both longitudinal and mitre cuts; quick reset to the starting position. The precise flip stops allow for direct reading of measurements along the entire length. Table dimensions: 830 x 1200 mm Saw carriage: 1500 x 290 mm Cutting length: 1500 mm Saw blade tilting: 45° Max. main saw blade diameter: 300 mm Max. scoring saw blade diameter: 100 mm Max. cutting height at 90°: 95 mm Max. cutting height at 45°: 67 mm Saw blade speed: 4,000 rpm Scoring saw speed: 8,000 rpm Cutting width with parallel fence: 1,000 mm Extraction port diameter: 100 mm Motor: 4 kW Weight: 425 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1998, Max. cutting width: 5300 mm; max. cutting height: 2200 mm; saw blade diameter: 300 mm; max. processing thickness: 80 mm; saw blade bore: 30 mm; lower support: fixed rollers; material support: closed wooden support; saw head tilting: manual; extraction: external extraction; saw beam locking: manual; approximate weight: 1500 kg; dimensions: 6300 x 1500 x 2900 mm; motor power: 5.5 kW. Storage location: Supplier Fpedjy N Thtspfx Aa Neg

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 33700 € 643.67 € Doppelsäulenführung 6300 x 41 x 1,3 mm 15 - 120 m/min 440 mm 440 mm 640 x 440 mm rund 440 mm, rechteck 400 rund 250 mm, rechteck 250 rund 390 mm, rechteck 390 860 mm 1.1 kW 4 kW 0.12 kW 3150 mm Fpedpfx Aswirzloa Nsg 1850 mm 2115 mm 2050 kg 3° inclined sawing band blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way height adjustment pressure adjustment coolant pump saw blade security switch gearbox syncronized movement of sawing arm/clamping jaw hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH ALTERNATIV: Version BMSY 440 CDGH NC with automatic mitre adjustment by NC control

Condition: new, Year of construction: 2026, Description of the machine: Efficient and fast cutting of large diameter wood Fpjdpfowtp Rljx Aa Neg Stable and durable construction resistant to overloading Safe operation thanks to pivoting system Easy to use and maintain Carbide circular saw included Technical data Maximum diameter of blade/hole [mm] 700x30 Maximum height of wood [mm] 280 Maximum width of wood [mm] 290 Disc speed [rpm] 1400 Motor power 5 kW Power supply 400V Weight 92, 5 kg Dimensions [mm] 1170x770x1070 Declaration CE yes

Condition: good (used), functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm Fedpfxoygm Aks Aa Njpg - Saw blade diameter 330 mm - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Transport available at extra cost! Due to the age of the used machine, warranty is excluded when sold to commercial customers.

Condition: used, Year of construction: 2009, Saw blade diameter 500 mm. Manual angle adjustment from 90° to 45°. Lower blade feed into the cut. 4 kW motor (400 V). Pneumatic upper profile clamping. Blade cooling and lubrication system. Extraction unit with chip collection container. Seldom used. Fpsdpfxsy Rhy To Aa Nsg

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 165 x 210 mm 195 mm 185 x 185 mm 130 x 190 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 85 x 85 mm capacity 60 degrees: flat 85 x 120 mm 170 mm 145 x 145 mm 60 x 195 mm Fpodpfxoy H N Nne Aa Njg cutting speed 36 + 72 m/min dimensions of saw-band 2725 x 27 x 0,9 mm 315 mm work height max. 900 mm Motor output 1,2 kW Weight 330 kg

Condition: new, Year of construction: 2026, neu 2026 060215 Juni 2026, Zwischenverkau Türkei 9280 € 179.1 € Schwenkrahmen 3160x27x0,9 mm 20-100 m/min 270 mm 270 mm 340x220 mm rund 230 mm, quadratisch rund 150 mm, quadratisch rund 180 mm, quadratisch 910 mm 0.37 kW 1.5 kW 0.12 kW 1730 mm 770 mm 1460 mm 476 kg DIGITAL ANGLE READ OUT blade brush control panel swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame Fpodpfewirktox Aa Nsg quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, Year of construction: 2026, neu 2026 060216 Juni 2026, Zwischenverkau Türkei 20700 € 397.44 € Schwenkrahmen 5200x34x1,1 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 410 mm, quadrat 410 rund 320 mm, quadrat 250 rund 410 mm, quadrat 410 rund 320 mm, quadrat 285 860 mm 0.55 kW 3 kW 0.12 kW Fpjdpfxewiqtye Aa Nog 2800 mm 1210 mm 1870 mm 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Fjdpfxexg Igis Aa Nspg

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Fjdpju R R Acjfx Aa Nspg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width Fsdpeu R R Avofx Aa Nopg 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Chip conveyor Yes Fsdpfx Aaju U Narj Nopg Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes Fodsxg Hanepfx Aa Nspg

Condition: good (used), Year of construction: 2012, Used Bomar bandsaw with dual column system Model: Individual 620.460 DGH Capacity: 620 x 460 mm Double mitre Fpsdjy Rktijpfx Aa Njg Year of manufacture: 2012 Includes 6 meter infeed conveyor + 6 meter outfeed roller conveyor with measuring system

Condition: excellent (used), Year of construction: 2002, Bandsaw automatic machine, make KLAEGER HBA325, year 2002, in very good condition. Cutting capacity round max. 325 mm Equipped with coolant system and coolant mist spray device, machine documentation available. Fpsdey Rgcaepfx Aa Neg For further technical data, please refer to the data sheet.

Condition: excellent (used), KASTO HBA 420AU Bandsaw Gantry type Automatic Fpjdpfxexxht He Aa Nsg Cutting diameter: 420 mm Single material feed: 600 mm Multiple feed: x9 Coolant pump Documentation Weight: 3,400 kg Net Transport possible to any location in the country Feed table Machine in perfect technical condition!

Condition: used, Cutting height ~ 80 mm Chain width 300 mm weight ~ 1.200 kg Compact Maka type V 250 J multirip saw for ripping and trimming wood with several saw blades. Fpsdpfxjy N D R Se Aa Nog Including dismantling and loading. Fixed loading date: 15.06.2026.

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, cutting height (max.): 360 mm, cutting width (max.): 500 mm, Equipment: CE marking, FOR SALE: PEGAS 360x500 SHI-LR – Semi-Automatic Band Saw for Professional Use For sale: High-performance, heavy-duty PEGAS 360x500 SHI-LR band saw designed for demanding metalworking applications. This machine offers an impressive cutting capacity and an efficient semi-automatic operation cycle. KEY FEATURES • Semi-Automatic Cycle: After manual adjustment of the vices, hydraulic clamping, cutting, and frame return are performed automatically according to user-defined parameters. • High Capacity: Capable of cutting round stock up to 360 mm and rectangular profiles up to 500 x 360 mm. • Versatile Mitre Cutting: The saw arm swivels to both sides (left/right) with precise mitre angles of 45° and 60°. • Infinitely Variable Speed Control: Blade speed is steplessly adjustable from 20–100 m/min, providing optimum cutting settings for various materials. TECHNICAL DATA • Blade Dimensions: 4780 x 34 x 1.1 mm • Drive Power: 3.0 kW (total power input 7.7 kW) • Controls: Hydraulic frame feed and vice clamping, manual material feed and blade tensioning. • Coolant & Cleaning: Equipped with an integrated coolant pump (0.44 kW) and a pulley-driven cleaning brush, maximizing blade lifespan. • Dimensions: Length: 2873 mm Width: 1080 mm Weight: 715 kg • Table Height: 812 mm CUTTING CAPACITY (mm) Angle Round (D) Rectangular (a x b) 0° 360 mm 500 x 360 mm 45° 360 mm 440 x 240 mm 60° 300 mm 290 x 280 mm STANDARD ACCESSORIES INCLUDED • Band saw blade Fpodpfx Ajy Rvcpea Neg • Set of service spanners • Operating instructions (on CD) This saw is a robust and reliable solution for any workshop looking for precision and heavy-duty cutting performance. Built with durability and ease of maintenance in mind.

Year of construction: 1992, condition: good (used), Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine -Manufacturer: Alfred E.Gohl, glass bead saw type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW Fpjdpoif Azfefx Aa Nsg -Speed: 3000 rpm -Dimensions: 1100/650/H1350 mm -Weight: 152 kg

Condition: excellent (used), functionality: fully functional, CML J250 Multi-Blade Saw Track width: 250 mm Maximum distance between outer saw blades: 220 mm Cutting height: 80 mm Main motor power: 18.5 kW Fjdpfjy Ewtlox Aa Nopg Maximum saw blade size: 300 mm Feed speed adjustable Extraction port Ø 200 mm CE certificate

Condition: used, Year of construction: 1997, dimensions of saw-band 3150 x 25,4 x 0,9 mm 20/40 m/min Fpodsyyc A Iopfx Aa Nog capacity 90 degrees: round 260 mm capacity 90 degrees: square 250 mm capacity 90 degrees: flat 320 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 210 mm capacity 45 degrees: flat 240 x 200 mm