Used Second Operation for sale (32,922)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Godpfxey Nkhde Akajug Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Machine table with 8 collet chucks and 8 two-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2m 1x VE 40/80 sawing unit 8x feed units: VE 36/100 or VE 35/60 5x CNC 50/100 turning units 2x 3-axis CNC milling units Nordmann tool monitoring Pickup conditions: The machine base measures approximately 4 meters in length, 3 meters in height, and 2.5 meters in width. The weight is approx. 6 tons. The other components are demountable. The hall is very spacious. There is no crane runway; a forklift is required for disassembly. No forklift is available on site! The aisles are 3 meters wide. There is a large roller gate, and trucks can drive directly up to, or even through, the gate for loading.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: LR2009MAHEDEDM100PO1, type of input current: AC, total width: 1,150 mm, total length: 2,850 mm, total height: 1,900 mm, overall weight: 1,100 kg, outer diameter of label roll: 550 mm, inside diameter of label roll: 76 mm, input voltage: 380 V, compressed air connection: 6 bar, For sale is a fully automatic mask machine DM-85-P (CE version) with 380V connection – suitable for masks Type II and IIR. The mask machine is designed to process multi-layer fabrics into various masks by means of forming folds, ultrasonic welding, ear loop welding, and nose wire welding. The fully automatic mask machine Lianrou LR-DM-85-P is a late-generation model and is also a patented product by LIAN ROU. Compared to traditional disposable mask machines, it offers the following advantages: First, the LR-DM-85-P requires only one unit to complete the entire mask production process, which significantly reduces the space required for the production line; second, it features an integrated production design with an aesthetically clean and organized structure. Most importantly, it is equipped with a range of reliable safety features, thus ensuring a safe operating environment for the operator. In summary, this machine stands out for its excellent cost-performance ratio and high reliability. Technical data / Notes: Model: DM-85-P Design: Electric-Pneumatic Gujdpjya Hdbefx Akasg Voltage: 380V Certification: CE Manufacturer’s documentation and wiring diagrams included If interested, please get in touch – viewing by appointment possible.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. Gedpfx Ajzdqv Uokajug For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Economical in operation due to the long service life of the filter cartridge. Parameters: Capacity - 1100 m3/h Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Stock number - 1145

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: AB-216795, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 5, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 5 pcs. Min. planing width: 25 mm Max. planing width: 230 mm Min. planing height: 6 mm Max. planing height: 120 mm Infeed table length: 2,470 mm Spindle 1 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 2 Spindle type: Right Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 3 Spindle type: Left Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 4 Spindle type: Top Motor power: 9 kW Spindle diameter: 40 mm Gjdpfx Akszxchljajug Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 5 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 140 mm Feed rate: Automatic Min. feed rate: 5 m/min Max. feed rate: 25 m/min Feed rate control: Variable Conveyor motor power: 3 kW Conveyor drive: Cardan shaft drive Diameter of feed rollers: 140 mm MACHINE DETAILS Lubrication system: Manual Diameter of dust extraction nozzle: 120 mm Voltage: 400 V Current consumption: 57 A Fuse rating: 63 A Power: 10 kW Dimensions & Weight Dimensions (L x W x H): 4,150 x 1,650 x 1,750 mm Dry weight: 2,600 kg Transport packages: 1 pc. EQUIPMENT CE marking Documentation Cardan shaft drive Manual lubrication system

Condition: reconditioned (used), Year of construction: 2026, operating hours: 100 h, machine/vehicle number: BMWF241003, Professional Rebuild and Retrofit of Heavy CNC Lathes: Niles, Weiler, Gildemeister, TOS, TURMN The offer is for a TUR MN 560 CNC lathe. Max turning diameter: 560mm, max turning length: 960mm. Equipped with a 4-position Sauter turret. All wear parts have been replaced; the machine has been repainted and retrofitted with a new Siemens 828D. We specialize in restoring full operational capability and performing digital modernization of heavy machine tools that form the foundation of rigid and efficient production. We combine the legendary durability of heavy cast iron with state-of-the-art Industry 4.0 control systems. Why choose our retrofitted machine? Performance of a New Unit at 50% of the Price: We offer machines with the performance and accuracy of new machining centers at a fraction of the cost of a new investment. Unrivaled Rigidity: We rely on proven machine bases from brands such as Niles DFS 4 (slant bed, 17 t weight) or TOS SUA (load capacity up to 8 tons), which outperform modern, lighter designs in terms of vibration damping. Modern CNC Heart: We install the latest systems (Siemens Sinumerik ONE / 840D sl / 828D), ensuring full availability of spare parts, remote diagnostics, and ease of programming. ​ ​ Warranty and Support: Every machine after complete mechanical overhaul (DIN 8605 accuracy class) and electronic retrofit is covered by a 12‑month warranty. Our specializations: Niles DFS 3/4: Comprehensive rebuilds of multi-axis centers (C, Y, B) for the most demanding applications. Weiler E Series: Restoring legendary precision and intuitive cycle operation for premium toolrooms. Gildemeister NEF 710: “Smart Retrofit” of the control system, giving a second life to these reliable German designs. TOS SUA 80/100: Complete overhauls for the heaviest shaft and large-part machining. TURMN 630/800/1100: General overhauls and “Smart Retrofit” CNC control upgrades. Our offer goes beyond selling ready-made machines. We provide full flexibility and consulting throughout the investment process: Purchase on Request: At the customer’s request, we search for the optimal machine base on European markets (e.g. Germany, Italy, Poland). We use our experience in evaluating “dead CNC” machines to buy units at a price close to mechanical scrap value, while preserving their full potential for rebuild. Evaluation and Pricing of Market Machines: If the customer finds a machine independently, we offer a professional mechanical inspection (bed geometry, spindle play) and preparation of a detailed cost estimate for overhaul and retrofit. Godev R Dlyopfx Akasug Overhauls of Customer-Owned Machines: We carry out complete modernization of machines already installed in the customer’s machine park.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages Gjdpfxjzmyvio Akaeug 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: like new (used), Year of construction: 2021, operating hours: 4,393 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 670 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, NEW: EMCO EMCOTURN E45 (Year 2021) CNC Lathe – FANUC 0i-TF, 4,393 hours, like new condition! Includes a parts collection device for the removal of finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of Manufacture: 2021 • Serial Number: S4E213351 • Control: FANUC 0i-TF incl. handwheel • Operating Hours: 4,393 hours (see image 263.599 minutes = 4,393 hours) • Machine Type: Single-spindle lathe with parts collection device • Number of Tool Positions: 12-position VDI-30 axial turret with two hole patterns • Condition: Like new, fully functional • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Additional pictures and videos of the running machine will be provided upon request. _____ Item Description For sale is a high-precision CNC turning center, the EMCO EMCOTURN E45, manufactured in 2021, with low operating hours of only 4,393, and in very good condition. Special features: • Control: Modern FANUC 0i-TF control for easy programming, including handwheel • Parts collection device: The parts collection device (parts catcher) of the EMCO EMCOTURN E45 CNC lathe gently transports finished workpieces out of the working area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with a substantial 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical Data: Working area and travels: • Swinging diameter over bed: 430 mm • Swinging diameter over cross slide: 300 mm • Distance between centers: 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travels (X / Z): 160 / 510 mm Main spindle and drive: • Speed range: 0 – 6,300 rpm • Drive power, main spindle: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / Spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two hole patterns • Tool shank according to VDI (DIN 69880): VDI 30 • Tool cross-section for square tools: 20 x 20 mm • Shank diameter for drill rods: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse rate (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm Gujdpezkhuhofx Akaog _____ Scope of supply & terms of sale: • CNC lathe EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included. • FANUC operating manuals and machine documentation • Loading by forklift on site is included. The machine is immediately available and can be viewed and tested under power after prior appointment. Subject to prior sale and errors.

Condition: used, Year of construction: 2005, machine/vehicle number: 660093, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical machining center from the manufacturer OPS INGERSOLL, model: OPS 600. MACHINE DETAILS Operating voltage: 400 V 3~ Frequency: 50/60 Hz Control voltage: 24 V DC Current consumption: 22 A Gsdszy Ukbopfx Akasug Pre-fuse: max. 32 A

Condition: used, Year of construction: 2020, operating hours: 2,000 h, machine/vehicle number: LC665, Technical Specifications & Performance DataThis Tetra Pak A3/Compact Flex aseptic carton filling and capping line is configured for Prisma Edge packaging in the 250 ml format. It combines carton filling, cap application and Helix handling equipment for compact beverage production and industrial packaging operations. The available equipment is designed around the Tetra Pak filling platform and Cap30 DreamCap closure system.Manufacturer: Tetra PakFiller model: A3/Compact FlexMaximum production capacity: 9600 BPHPack format: 250 ml Prisma EdgeAvailable configuration: filler, Cap30 capper and Helix equipmentOperating hours: 2000Machine year: 2020Advanced Automation & Control SystemsThe equipment includes line control for coordinated operation of the available filling, closure application and handling sections. A controlled line architecture supports consistent product flow through the filling and capping process while allowing the individual modules to operate as an integrated packaging system. The listed configuration includes Filler, LC40, ACHX30 and Cap30 components.Production Line Integration CapabilitiesThis equipment is suitable for integration into an aseptic carton packaging line. The available filler, capper and Helix sections can be positioned with compatible upstream product preparation equipment and downstream carton conveying, accumulation, coding and secondary packaging machinery. Its Prisma Edge format configuration makes it relevant for beverage production applications requiring 250 ml carton packs.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3/Compact Flex2020Capping MachineTetra Pak Cap30 DreamCap2020Various EquipmentTetra Pak Helix2020Machine Condition & Maintenance HistoryThe line is reported as running, with 2000 operating hours. The stated availability is limited to the filler, capper and Helix equipment. This condition provides a practical basis for buyers planning a second hand aseptic packaging installation, line extension or replacement project within an existing industrial packaging environment.Operational Performance & VersatilityThe A3/Compact Flex platform is intended for high-output carton filling and closure application. The Cap30 DreamCap system is matched with the listed carton format, supporting a consistent filling-and-capping sequence for Prisma Edge packs. With a maximum stated output of 9600 BPH, the equipment can support structured beverage production where compact retail carton formats are required.Installation Requirements & Site PreparationInstallation should be planned as part of a complete aseptic carton packaging layout, with appropriate product supply, utility connections, hygienic process interfaces and downstream pack handling. Site preparation should allow access for operation, cleaning, maintenance and format-specific material handling. Compatible line controls and conveying should be assessed when integrating the available modules into a used bottling line or broader industrial packaging... Guedpfx Ajzucgmokaog

Condition: used, mileage: 8,78,193 km, power: 220 kW (299.12 HP), first registration: 09/2010, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until conclusion of the sale, subject to errors, typos, and prior sale: Mercedes Benz Citaro NF O530 Bus, 33+57+1 (Vehicle 315) First registration: 20.09.2010 878,193 km Engine: 11,967 ccm 220 kW / 352 hp Euro 5 EEV Permissible gross vehicle weight (GVW): 18,000 / 20,900 kg Unladen weight: 11,789 kg Payload: 6,211 kg Axle load front: 7,245 kg, axle load rear: 11,500 kg Guedpfx Aozztrmekaog Overall length: 11,950 mm, overall width: 2,550 mm, overall height: 3,400 mm 33+57+1 seats (sitting/standing/wheelchair/stroller) Ramp at the second double door for strollers and wheelchairs Air conditioning, heating, auxiliary heater Double door at the front and rear Microphone Fully automatic transmission LAWO (system) Without cash register Radio/CD Electric windows Emergency exit Electric mirrors + heated mirrors Engine slightly oily, malfunction indicator for brake control, currently being investigated; either the sensor on the brake caliper is defective or the cable is defective. Various signs of wear and tear, consistent with age. Not a new vehicle; the vehicle was in regular service until it was taken out of operation. Air suspension Full automatic system Tires 275/70R22.5, front approx. 90%, rear approx. 30% Price: €7,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, Year of construction: 2007, functionality: fully functional, space requirement width: 2,300 mm, space requirement length: 3,500 mm, space requirement height: 4,200 mm, conveyor belt width: 850 mm, -WAG 916- Here, a compact shot blasting machine from the manufacturer Wheelabrator is offered for sale. The compact shot blasting machine, type MB-100, is fully functional. Operating hours: 6493.23 h Turbine power: 7.5 kW, 14.6 Amps Next inspection: 01/27 Machine control: Manual or automatic operation Feeder control: Manual or automatic operation Gjdpfjzkub Usx Akaeug Blast time setting: Fine adjustment between seconds, minutes, and hours Space requirement length: approx. 3500 mm Space requirement width: approx. 2300 mm Space requirement height: approx. 4200 mm Conveyor belt width: 850 mm The compact shot blasting machine has been completely disassembled and cannot be tested while powered on.

Condition: used, Year of construction: 2004, machine/vehicle number: 1130.2623-31, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on site for loading. For sale is a CNC lathe manufactured by VDF Boehringer, model: NG 180-2. Guodpfx Akozy Ukueaog TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Type of current: AC Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Machine number: 559969 Manufacturer: HOMAG Model: PROFI BAZ 723/42/18/KC Year of manufacture: 2004 Technical details: Weight approx.: 10000 [kg] control: PC85 [] Dimensions (l x w x h) approx.: 39000 x 3200 x 3200 [mm] c-axis: ja / yes [] software: WoodWOP [] working length x-axis: max. 4.200 [mm] working width y-axis: max. 2.075 [mm] main spindle: 2x 14,5 [kW] tool changer: 2x 18-fach / 2x 18-fold [] vacuum pump: 2x 100 [cbm/h] edge gluing unit: ja / yes 360° [] path-feed rate max. X-axis: 80 [m/min] path-feed rate max. Y-axis: 60 [m/min] path-feed rate max. Z-axis: 40 [m/min] Item Description High-End-equipped, technically well maintained HOMAG PROFI BAZ 723/42/18/KC CNC Machining Center in portal design with 360° edge glueing unit, 2 main spindle with C-axis, automatically positionable clamping consoles and HOAMG Optimat TBP 370 vacuum feeder in in portal design. The original price was approx. 620.000 EUR. Technical data and equipment of the HOMAG Profi BAZ 723 CNC: - Workpiece length for single operation max. 4.200 mm - Workpiece length cutter Ø 25 mm for pendulum operation max. 2.040 mm Gsdpfsxvy Ukex Akasug - Workpiece length glueing for pendulum operation max. 1.850 mm - Workpiece width (cutter Ø 25 mm) max. 2.075 mm - Workpiece width (glueing) max. 1.950 mm - Workpiece width (all aggregates) max. 1.850 mm - Console table KC-System 2 pieces left/right automatic positioning of the consoles and vacuum clamps - First main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Second main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Edge gluing aggregate 360° glue with butt joint mounted on the right side of the portal with Y-axis drive Drive spindle with C-axis edge height max. 65 mm edge thickness 0,4 - 3 mm pre-cutting station and 2-fold roller magazine - Chip conveyor belt for automatic disposal with ascending conveyor (The tools, the HSK holders and the units for the tool changer are not included within delivery. A transport rack from HOMAG is required for transportation of the dismantled machine. Terms of payment and delivery Delivery terms: ex foundation, unpackaged Payment terms: 100% before loading Warranty: Without any warranty

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 230 V, total width: 996 mm, total length: 1,311 mm, total height: 2,633 mm, overall weight: 250 kg, input frequency: 50 Hz, Equipment: documentation/manual, The InspecVision Planar P70.20 is a high-speed, non-contact 2D optical measurement and reverse-engineering system. Machine type: 2D optical inspection and measurement system Maximum part length: 1,000 mm Maximum part width: 667 mm Maximum part thickness/height: Up to 350 mm* Maximum part weight: 50 kg, evenly distributed Measurement accuracy – length/width: ±20 / ±40 µm Point spacing / resolution: 0.18 mm Measurement speed: Less than 0.25 seconds SurfScan resolution: 0.15 mm Camera: High-resolution industrial camera Lighting: LED Software: InspecVision inspection, SPC, reporting, and reverse-engineering software CAD comparison: DXF comparison and dimensional inspection Reverse engineering: Available Power supply: 230 V, single phase, 50 Hz Maximum power consumption: Approx. 4 A Gusdpfx Ajzvxg Eskaog Operating temperature: 10–30 °C Computer interface: USB 2.0 / USB 3.0 Approximate machine dimensions (W × D × H): 1,311 × 996 × 2,633 mm Machine weight: Less than 250 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8696, Year of construction: 2015, operating hours: 7,673 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: gas, mast type: simplex, construction height: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! Gujdpfx Ajzy U Srskaog TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,500 mm Overall height: 3,100 mm MACHINE DETAILS Mast type: Simplex ISO class: 3 (2,500–4,999 kg) Drive type: Internal combustion engine Operating hours: 7,673 h EQUIPMENT Fork positioner Heater Full cabin External reference: SL9839SP

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Gujdpfx Ajqu Sc Hskasg Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Gsdoyyz Ebopfx Akajug Subject to prior sale, modifications, and errors!

Condition: used, Year of construction: 2020, operating hours: 87 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input current: 2 A, Equipment: type plate available, Used FINIMAC blasting cabinet/shot blasting machine for sale, model V1, manufactured in 2020 (serial number 2733), by FINIMAC (Vittuone, Milan, Italy). Second-hand equipment, with very little use – the internal counter registers approximately 87 operating hours. Cabinet with inspection window, two work gloves for handling parts, control pedal, pressure gauge, and its own control panel (main switch, emergency stop button, and hour counter). 400V three-phase power supply. Internal identification "M63". Guodpezvdfmefx Akajg Condition: used equipment (not new/factory), functions normally, tested and operational.

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Guodpfxsyhcgho Akaeg Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function. Barrel and screws are in a good condition.

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Gjdpfx Ajzp Nz Tskajug Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 1.511.030, functionality: fully functional, planing width: 240 mm, spindle diameter: 40 mm, number of spindles: 6, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 6 Min. planing width: 44 mm Max. planing width: 240 mm Min. planing height: 18 mm Max. planing height: 150 mm Infeed table length: 1,150 mm Spindle 1 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 2 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 3 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 4 Spindle type: Horizontal spindle Gujdpfx Aozxch Eskasg Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 5 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 6 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Feed rate: Automatic Min. feed rate: 6 m/min Max. feed rate: 24.1 m/min Feed rate control: Stepless Conveyor motor power: 8.7 kW Conveyor drive: Cardan drive Diameter of feed rollers: 140 mm MACHINE DETAILS Control system: Schneider Voltage: 415 V Current consumption: 144.3 A Fuse rating: 200 A Connected load: 60 kW Diameter of dust extraction nozzle: 125 mm Lubrication system: Manual Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,800 mm Unladen weight: 2,000 kg Shipping packages: 1 unit

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Guedpfjy Snwnox Akasg Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Gusdpfxozl Shzo Akasg Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: used, Second-hand machine Features and technical specifications: - JN-85 PS semi-automatic pallet strapping machine - The semi-automatic pallet strapping machine is suitable for a wide range of packaging requirements, making it a versatile choice for numerous sectors, including logistics, manufacturing and retail. It meets various requirements for packing goods onto pallets. - The mobile design of this model allows for convenient operation, particularly in confined workspaces with manual lifting equipment that are inaccessible to cranes. - The compact design of this model allows for flexible use, meaning the machine can be used even in confined spaces where other machines cannot fit, thereby maximising the use of the available workspace. - The semi-automatic pallet strapping machine is an indispensable tool in the packaging industry and has been designed to optimise and streamline the process of securing goods onto pallets. Given the growing demand for efficient packaging solutions, investing in such machines can have a significant impact on productivity and operational efficiency. - Length of conveyor belt: 1000 mm (standard) - Min. packaging height: 550 mm Gedpfjzlbttsx Akajug - Motor: 1.23 kW / 230 V Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2012, The SAC F4TL window manufacturing centre is designed to meet the requirements of modern window production. It enables highly efficient, high-quality manufacturing with minimal setup time and without the need for tool changes. After machining, the workpiece is automatically returned to the operator. SAC F4TL CNC Window Manufacturing Centre – Machining Units Tenoning Side 1. Tenoning carriage 2. End trimming unit 3. Tenoning spindle Profiling Side 4. First profiling spindle 5. Second profiling spindle 6. Glazing bead notching unit 7. Hardware slot milling unit (optional) Feed System Tenoning Side 1. Tenoning carriage • Machining speed: 3–10 m/min • Return speed: 45 m/min • Table size: 290–955 mm • Motor power: 1.1 kW • Fence tilting angle: ±60° 2. End trimming unit • Saw blade diameter: 400 mm • Bore diameter: 30 mm • Motor power: 3 kW Gujdpfx Ajzl D Dnjkaog 3. Tenoning spindle • Vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 620 mm • Vertical travel: 565 mm • Motor power: 7.5 kW • Maximum tool diameter: 350 mm Profiling Side 4. First Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: left/right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 5. Second Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 6. Glazing Bead Notching Unit • Saw blade diameter: 200 mm • Saw blade bore: 30 mm • Horizontal spindle adjustment: 60 mm • Motor power: 2.2 kW Optional Unit 7. Hardware Slot Milling Unit • Motor power: 3 kW • Spindle diameter: 30 mm • Spindle length: 100 mm • Horizontal spindle adjustment: 60 mm • Vertical spindle adjustment: 60 mm • CNC-controlled with 2 vertical positions (maximum difference: 60 mm) • Maximum tool diameter: 190 mm Feed System • Feed speed: 4–20 m/min • Pneumatic workpiece clamping CNC Control and Software • 17" colour LCD monitor • 102-key alphanumeric keyboard • Operating system: Windows XP Professional Options • Hardware slot milling unit • Motorized NC-controlled stop • Return roller conveyor • Leitz IV 69 tool set • Leitz IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.