Used Segmented for sale (863)

Condition: used, tank capacity: 4,000 l, Location: Bremen Condition: used Volume: 4,000 litres Tank Bottom: flat bottom Top: bolted lid with hinged segment Design: vertical Internal diameter: 1,590 mm Cylindrical height: 2,000 mm Total height: 2,200 mm Lodpfxoxqdnqj Aaboah Technical Data / Dimensions Bottom wall thickness: 3 mm Cylinder wall thickness: 3 mm Top wall thickness: 1.5 mm Nameplate: Equipment Outlet: available Outlet (alternative specification): 48 mm Note: slight adhesions Remarks: Tanks slightly out-of-round; outlet is positioned lower than tank bottom (consider during installation); sheet cutouts in the lid; nameplate available on only 2 tanks; 1 tank fitted with ball valve (see photos) Last application: cosmetics (shampoo) Product-contacting material: V2A 1.4301 (AISI304)

Condition: excellent (used), Year of construction: 1992, width 52 cm age 1992 flat pile feeder with suction head counter MCS 106 4 folding pockets in the parallel fold section Ljdpjkxcv Aefx Aabjah segmented folding rollers following knife shaft 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold stream delivery delivery time: immediately from stock

Condition: used, Year of construction: 1985, Table length: 2500 mm Spindle adjustment travel: 120 mm Table width: 760 mm Design: tiltable Tilting angle forward: +45° Tilting angle backward: -5° Extendable frame support: Yes Speed selection: belt change + pole switching Spindle taper: MK 5 Column material: cast iron Control panel position: top Spindle height adjustment: handwheel and electric Spindle tilt adjustment: handwheel with dial gauge Spindle locking: manual Spindle braking: electric Spindle rotation direction: left/right Motor power: 4.7 / 5.7 kW Table opening closure: insert segment Lsdpfx Ajw Aihpeaboah Fence jaw design: Aigner jaws Fence adjustment: manual Milling fence scale display: analog scale Cutter jaw adjustment: manual Power feed: yes, 4 rollers (Haffner) Feed adjustment: fixed speeds Dimensions: 2500 x 1500 x 1900 mm Location: Nattheim

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Quantity: 3x set of interchangeable jaws available -Price: per set -Total dimensions: 70/60/H50 mm / 70/60/H54 mm Lajdpfxsq Ei Ekj Aabsh -Total weight: 1.1 kg/set

Condition: new, Year of construction: 2025, functionality: fully functional, 1.86 m Roller Conveyor with Measuring Guide – Precision Roller Table for Cutting and Transporting Metal Materials The 1860 mm roller conveyor with an integrated measuring guide is an advanced solution for supporting material cutting and feeding in industrial settings. Thanks to its high load capacity, sturdy construction, and precise length measurement system, this conveyor is perfect for use with band saws, circular saws, and other metalworking machines. Seven steel rollers ensure smooth movement of workpieces of various shapes and sizes. Key Features Built-in measuring guide – precise length control without the need for additional tools 7 steel rollers (60 × 360 mm) – even weight distribution and smooth transport High load capacity of 900 kg – suitable for heavy pipes, profiles, bars, and shafts Adjustable height (650–1100 mm) – easy integration with different machines Modular extension capability – for building multi-segment roller tables Construction and Technology The CORMAK roller conveyor is made of deformation-resistant steel profiles. Stability is ensured by reinforced legs with crossbars. Each of the seven rollers is mounted on ball bearings, providing smooth and secure material guidance. The integrated measuring guide with a scale allows for quick length setting without the need for additional stops or measuring instruments. Precision and Work Efficiency The roller table with a measuring guide significantly shortens material preparation time by eliminating the need for manual measuring of each piece. Thanks to the precise measurement system, repeatable production can be carried out with high accuracy. Accurate material positioning improves cut quality, reduces material waste, and enhances workplace safety. Applications The 1.86 m roller conveyor with measuring guide is designed for production facilities, metalworking workshops, and companies involved in steel structure prefabrication. Especially recommended for: Precision cutting of pipes, bars, and steel profiles Lasdpfxsxp Iy Uj Aabsh Operation with band saws and circular saws Feeding and receiving parts during batch processing Creating linear transport systems Standard Equipment 7 steel rollers with ball bearings Steel frame with cross reinforcements Height adjustment system (650–1100 mm) Integrated measuring guide Adjustable leveling feet Technical Specifications Roller diameter 60 mm Roller length 360 mm Number of rollers 7 Conveyor length 1860 mm Conveyor width 450 mm Height adjustment range 650–1100 mm Maximum load capacity 900 kg Weight 50 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Lasdpoxpxhvofx Aabsh Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, tank capacity: 25,000 l, Location: Bremen Condition: used Volume: 25,000 liters Tank Lasdpjxqc T Ejfx Aabjh Specific gravity of the medium (t/m³): 1.4 (t/m³) Design: vertical tank Support: height-adjustable feet Number of feet: 3 units Internal diameter: 2,600 mm Cylindrical height: 4,500 mm Total height: 6,250 mm Technical data / Dimensions Wall thickness, bottom: 4.0 mm Wall thickness, cylinder: 3.0 mm Wall thickness, top: 3.0 mm Equipment Manhole/dome: in the cylinder Nameplate: Features: Venting/inlet, spray head, crane lifting lugs Equipment Outlet: pipe end approx. Ø 100 mm Note: Outlet pipe cut off Remarks: Manhole approx. 345 x 440 mm; Wall thickness, lowest cylinder segment: approx. 4.0 mm Previous application: fruit juice industry Product-contact material: V2A 1.4301 (AISI304) Material properties Feet material: stainless steel Agitator: agitator flange Agitator arrangement: eccentrically mounted in the top

Condition: used, Year of construction: 2019, operating hours: 6,680 h, functionality: fully functional, overall weight: 19,000 kg, power: 390 kW (530.25 HP), Equipment: Basic Package AK560 Eco-Power: Lodpfjw Swpfsx Aabeah - Central axle trailer chassis with 2 axles, 80 km/h road approval - Brake system incl. ABS and lighting according to EC directive - 50 mm EC towing eye with bolt-on shoe - Tyres 385/65 R22.5 - Hydraulically adjustable support leg - Splash guards (inner and side-mounted mudguards) - Permissible total weight 19,000 kg - Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT IV emission standard - Load-dependent feed control incl. automatic reversing scraper floor - Fuel tank 450 litres - Feed roller: length 1,690 mm, diameter 510 mm, fitted with tooth segments - Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Standard: "Streusel" flail tip - Centrally positioned lubrication strips - Electric pump for operating cylinder functions (e.g. raising/lowering support foot and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off - 24 V electric control system - Separate control box at the rear of the machine - Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, graded on request) incl. tailgate - Scraper floor with 32 slats - Complete remote radio control - Preparation for travel drive - Acoustic start-up warning - Paint finish: RAL2011 deep orange Optional Equipment: - Hydraulic travel drive - Drawbar extension 400 mm - Fuel tank 600 l - Additional hydraulic connection 20 l/min - Flail tip C1 bear paw with tungsten carbide - Fine shredding basket - Impact plate with strike bar - Rear conveyor 4 m - Separate drive for feed roller/scraper floor "Twin Drive" - Reinforcement plates in the loading hopper

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, overall weight: 10,000 kg, input current: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base Conveyor unit with a single transport belt, adjustable feed speed from 3 to 15 m/min by frequency inverter, including transport belt cleaning device. Constant working height of 920 mm. Automatic adjustment for various workpiece thicknesses (3 - 80 mm) via motor-driven movement of the upper machine section. The lifting gear’s toothed belt is dust-protected, and its operation is monitored via the integrated control cabinet. 1. Cross Sanding Unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt with additional blast tube for belt cleaning, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning system, and belt alignment control. Includes a door with glass window. 2. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Belt with double cleaning nozzles, wear-resistant brake unit, automatic belt length compensation, sanding belt operation counter to feed direction, intermittent belt cleaning, and infrared belt control. The front roller (steel) has an eccentric bearing for light calibrating, controlled from the operator terminal. 3. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Belt speeds: 0.5 – 18 m/s Drive power: 17 kW with frequency inverter Continuously adjustable sanding belt speed, double cleaning nozzle setup, wear-resistant brake unit, automatic belt length compensation, counter-feed direction sanding, intermittent belt cleaning, and infrared belt control. 4. Brush Roller Unit Centrally height adjustable, includes extraction hood and press-on roller. Laodpoxp Hvnefx Aaboh Roller diameter: 150 mm Drive power: 1.5 kW Bristles: fiber 5. Workpiece Suction Device Ensures safe transport of workpieces shorter than 500 mm in the feed direction, with integrated extractor fan. Voltage: 400 V, 50 Hz Belt exchange: left Operator terminal: left 6. Ionization Bar (from above) Removes static electricity, including high-voltage transformer. 7. Workpiece blow-off device with rotating compressed air nozzles inside the frame. The machine is ready for operation at your facility after mechanical and electrical overhaul by an authorized Heesemann service partner. Fitted with a new conveyor belt. Commissioning and training at your site may be arranged subject to negotiation. Transport costs negotiable – loading included in the price. If you have any questions, feel free to contact me. Paweł Szczepański +48 795 517 258

Condition: like new (used), Binder MKF 115 E5 Chamber has only 485 operating hours One-year warranty on spare parts Description MKF 115 Binder MKF climate chambers with temperature control (-40°C to 180°C) and humidity Binder MKF series environmental simulation chambers are ideal for all cold and heat testing carried out according to recognized temperature and climate testing standards compliant with DIN and IEC norms. The high level of user comfort and comprehensive standard equipment offer clear advantages in daily operation. Ledpfxsw U Sw Nj Aabjah Key features: - Temperature range: -40 °C to 180 °C - Humidity range: 10% to 98% RH - Built-in 20 L water reservoir (models 115, 240, 720) - 4 volt-free relay connectors - 1 stainless steel wire shelf - Preheating chamber technology e™ - Intuitive touchscreen controller with segment programming and real-time software - Built-in data logger, measurement values in an open format readable via USB - Programmable anti-condensation protection for samples - Heated viewing window with internal LED lighting - Humidity control with capacitive humidity sensor and steam humidification - BINDER Multi Management Software APT-COM™ Basic Edition - Diagnostic system with visual and audible alarms - Access port with silicone plug (model 56, 115, 240: 50 mm, left side) - 2 access ports with silicone plugs (model 720: 80 mm, left and right) - Independent, adjustable class 2 (DIN 12880) temperature safety device with optical alarm - 4 castors, two with brakes - Computer interface: Ethernet - 230 V socket on the right side panel (models 115, 240, 720) - Ramp function setting - Built-in chart recorder - Real-time clock - Door heating - Alarm message in case of missing water in the fresh water tank (models 115, 240, 720) - Hose leakage protection including supply and drain hoses up to 1 m - Stainless steel interior - Halogen-free refrigerant R-452A - Cooling provided by compressor unit One-year warranty on spare parts.

Year of construction: 2025, condition: new, functionality: fully functional, Corrugated box making machine is a machine designed for the production of cardboard boxes. Boxmaker is very easy to operate and adjust. It is characterized by very fast and precise work as well as the possibility of very easy adjustment of the machine. Technical details:  working width: 2400mm  large touch screen 15" Ledpfx Aowt S Dzeabjah  all settings for box production is controlled from touch screen  all set up is automatically simultaneously, 1 minute set up  capacity: ≈ 800 boxes per/hour  minimum board size (WxL): 200 x 400mm (minimum box 100x100x100mm)  maximum board size (WxL): 2400mm x unlimited  table feeding  segment slotting knives: 600mm (200 + 4x100mm)  slot width: 8mm  4 scoring wheels  3 circular knives for longitudinal cutting  cross cutting  multi cutting  gluing unit (cold glue by Robatech)  VPN connection  preprogrammed FEFCO styles (more than 40 fefco codes)  self design option  catching table  voltage: 3x380V  installed power: 10.85 kw

Year of construction: 2013, condition: excellent (used), The Tona Rapid is used to produce slices, segments or sticks from vegetables and fruits or to core products. The product holders ensure optimum alignment of the products and thus excellent quality of the cut. Ledpfsxgv D Nsx Aabeah

Condition: used, tank capacity: 10,500 l, Location: Bremen Condition: used Volume: 10,500 liters Max. overpressure: 1.5 bar Tank Max. operating temperature / °C: 20 °C Design: vertical Laodpfx Aexqcn Noaboh Tank Support type: height-adjustable feet Number of feet: 3 pcs Internal diameter: 1,500 mm Cylindrical height: 5,500 mm Total height: 6,800 mm Technical data / Dimensions Bottom wall thickness: 2.5 mm Shell wall thickness: 2.5 mm Technical data / Dimensions Top wall thickness: 2.1 mm Technical documentation: drawings, TÜV documents, various papers Features Manhole / Dome: in cylinder (approx. 350 x 450 mm) Nameplate: Equipment: spray head, crane lugs Features Outlet: DN80 DIN 11851 Note: pressure marks on cylinder Remarks: 1 stainless steel sheet inside lower base (see photos); wall thickness of lowest cylinder segment: 3 mm Previous use: brewery Product-contact material: V2A 1.4301 (AISI304) Material properties Foot material: stainless steel

Condition: good (used), Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Equipment: Basic package AK 315: - Central axle trailer chassis with 2 axles, 80 km/h road approval - Braking system incl. EBS and lighting according to EC directive - Tires: 385/65 R22.5 - 50 mm EC towing eye incl. slip-on shoe - Hydraulically adjustable support leg - Splash protection (inner and side mudguards) - Permissible total weight 16,000 kg - MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emission standard - Load-dependent control of material feed incl. automatic reversing of drag floor - Hydraulically foldable green waste screen basket with tailgate - Impact plate with teeth - Fuel tank 300 liters - Infeed roller: length 1,420 mm, diameter 510 mm, with attached tooth segments - Two-row flail drum with 16 freely swinging cast steel flail holders and replaceable flail tips and 28 fixed ripping teeth - Standard: "Streusel plus" flail tip Lsdpfx Aswvub Ioabsah - Centrally arranged lubrication strips - Electric pump for actuation of cylinder functions (e.g. lifting/lowering support leg and opening/closing tail basket, folding/unfolding rear conveyor, releasing travel drive) when the engine is off - 24-V electrical control system - Separate control box at the rear of the machine - Drag floor with 29 slats - Chain drive for infeed roller and drag floor - Extended radio remote control with 2 foot switches - Acoustic start-up warning - Rear conveyor 6 m, 1,500 mm wide with anti-magnetic center section - Reinforcement plates (Hardox) on the feed hopper sides (loading edge) on both sides - Travel drive preparation - Fire extinguisher - Doppstadt telematics system - Paint finish: RAL2011 deep orange Optional equipment: - Hydraulic travel drive - Extended radio remote control with foot switch - Flail tips "Bear Claw" - Fine shredding basket - Water spraying system - Lighting package: engine compartment and rear conveyor

Condition: used, Bütfering Optimat SCO 111 - Diamond C + LACQUER CONSTANT TABLE MACHINE / automatic head adjustment Robust frame construction with consistent workpiece infeed height of 900 mm by adjusting the machine top section. Workpiece thickness settings from 3 - 160 mm 1st unit: combined steel contact roller and electronically controlled segmented sanding shoe unit CPS II system with variable sanding pressure Stable VACUUM TABLE for large area support Extendable workpiece support Working width 1110 mm Lodpfx Aajxlzpzobeah Additional outfeed table – foldable Feed speed steplessly adjustable from 2.5 - 13 m/min. LACQUER SANDING PACKAGE: Vacuum table with lacquer carpet and 3 kW vacuum generator Stepless belt speed for lacquer sanding 2 - 18 m/sec. Oscillating belt cleaning across a working width of 1100 mm Motor power 1st unit 15 kW 14'' touchscreen control panel for automation and management of all work programs Machine is FULLY REFURBISHED and in TOP CONDITION Ex stock Lieboch

Condition: used, Year of construction: 1996, Working width: 1100 mm Working height: 140 mm Min. workpiece length: Height adjustment: electric Workpiece thickness display: digital Units: 1 1st unit: Combination unit (roller - pad) with electronic segmented sanding pad Electronically controlled segmented pressure beam: CPS system, element width 50 mm Cleaning brush: Yes Feed speeds: 2 Sanding belt dimensions: 1120 mm x 1900 mm Lajdpfx Aaexnhptsboh Sanding belt motor power: 11 kW Extraction connection: 160 mm, 140 mm Machine length: 1800 mm Machine width: 1800 mm Weight: 1500 kg

Condition: excellent (used), Wide Belt Sander SCM Sandya 20 3M 135 Working width: 1350 mm Working height: 3-170 mm Number of sanding units: 3 Steel calibration roller: 18.5 kW Rubber roller: 12 kW Combi unit with segmented pad: 11 kW Cleaning brush at outfeed Vacuum pump Feed speed adjustable via frequency inverter Optical oscillation Sanding belt: 1370x2620 mm Lajdpfx Aaoxhgr Hobsh

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 27 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Price: per set -Dimensions total: 90/80/H65 mm Lsdpfxjrh Nh Se Aabjah -Total weight: 2.4 kg/set

Condition: new, The SSB 40 Xn, a high-performance Column Drilling Machine from KNUTH, is designed for both repair and production environments. This universal drilling machine boasts a robust and thick-walled column, powerful drives, and dependable gearboxes for spindle and feed operation. With a substantial work area and large universal clamping tables, it handles a variety of workpieces effortlessly – from small parts to large, heavy assemblies. Key features include a tilting table for angled drilling, an automatic drilling feed, and a 12-step main drive that ensures a finely segmented speed range. Moreover, the machine integrates a powerful coolant system and a modern LED light for improved visibility and operator safety. You can also easily switch the automatic feed on and off, and the simple design of the machine facilitates quick tool changes. For a reliable drilling solution, you can request a quote for the SSB 40 Xn today. Experience the precision and robustness of KNUTH’s Column Drilling Machines to enhance your workshop's productivity. Lodouyg Igjpfx Aabeah

Year of construction: 2013, condition: ready for operation (used), The Tona Rapid XL processes larger fruits and vegetables with a maximum diameter of 130 mm and a maximum height of 220 mm. It can be used to efficiently cut products such as pineapples, beets, oranges or eggplants/aubergines into slices, segments or cubes. The cutting machine is particularly suitable for fruit and vegetables that must remain in a certain alignment during the cutting process in order to ensure perfect cutting results.   Laodpjwdpmujfx Aabsh

Condition: like new (used), functionality: fully functional, Year of construction: 2013, AEOLUS Municipal Solid Waste Treatment Line – 25 t/h Modular Sorting and RDF Production Plant System for production of residual material derived from municipal solid waste “AEOLUS” The “AEOLUS” system is the complete, future-oriented solution for the treatment of municipal solid waste with a view to the optimum use of energy and the resources contained in the waste. The modular technology consists of proven procedures comprising mechanica; treatment and sorting of waste, but it also includes pretreatment through pneumatic air classification in order to produce fractions. The segments (modules) of the system’s technology were designed so as to allow the expansion of the system with additions (via interfaces) whenever this is necessary. The key factors of technology are: - The recovery degree of, ie. The amount and - The quality of recovered materials The selection and prioritization of all the above processes vary in each unit depending on the composition of household waste and the potential absorption of individual components from the local market. By this way, the method of the system is characterized by flexibility and adaptability to the specific features of the unit installation area, which is also a significant advantage over other methods of waste utilization. The “AEOLUS” system consists of the following subsystems: No. Machine/subsystem name 1. Regulated feeding system of continuous flow 2. Rotating Drying and Separation Unit of organic and inert materials up to 60 mm 3. Pneumatic air separator for materials classification and size control based on specific weight (heavy and light fraction) 4. Horizontal conveyor belt of hand sorting 5. Inclined cleated elevator of close type 6. Rotaru shredder crusher for the homogenization-smoothing of materials Ledpexlcx Rsfx Aabjah 7. Magnetic metal separator TECHNICAL SPECIFICATIONS TABLE Capacity – 25-30 t/h Operation voltage – 380 V Electropneumatic operation – 6 atm Power – 200 KW Final product dimensions – 3-25 sm Main equipment of “AEOLUS” – Metal SOUKOS ROBOTS construction (LxWxH) = (27,7x9,5x10,5m), which consists: - All the necessary mechanical equipment - Control and programming central electrological panel: S Auto mode S Manual mode (by selection) S Indication of voltage and current S Emergency stop 5 Display of individual parts function via LEDs and section indication Main metal construction properties – 5Watertight and airtight construction S Soundproof overlay S Robust metal construction with enhanced sides and floors S Multiple open able ports of controlled function, for easy access to the various stages Necessary staff (8 hour operation) – Two (2) people and the necessary number for hand sorting.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 80042, grinding wheel diameter: 500 mm, total width: 3,500 mm, total length: 8,500 mm, total height: 2,900 mm, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: SERIES OI-TD, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 3 x 125 A Grinding wheel: Lsdpoxm T Ewsfx Aaboah Segment width: max. 32 mm Cutting disc: Permissible diameter: max. 520 mm Segment width: max. 3 mm Segment height: max. 5 mm Workpiece clamping: Left workpiece spindle, chuck type: hydraulic actuation Right workpiece spindle, chuck type: hydraulic actuation Including bar feeder from manufacturer FMB Type: MINIMAG 20 Year of manufacture: 2016 NOTES ON COLLECTION: Attention: only available from week 3 of 2026 FCA Winterlingen, loaded onto truck

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND bending length: 1020 mm bending capacity: 2,5 mm Ljdpfxepgmtwe Aabsah max. bending angle: 0 - 135°. segmentation of the upper beam: 270; 200; 150; 100; 75; 50; 45; 40; 35; 30; 25 mm opening width of the upper beam: 45 mm backgauge manually adjustable up to: 540 mm weight: 285 kg

Year of construction: 2018, condition: excellent (used), The wedging and coring machine OS12 for citrus has been designed to core and slice oranges into segments. The structure consists of a rotating plate with 8 workstations for fruit. Above the plate, on the opposite side to the loading side, we find the mechanisms for the two operations. The first mechanism moves up/down by means of a pneumatic piston and allows rotation of the coring tube by means of a three-phase electric motor. Lsdswdgp Tepfx Aaboah The core tubes are interchangeable. The second mechanism always moves up/down by means of a pneumatic piston and is equipped with pads that push the fruits through the die-cutters, allowing them to be cut into wedges. The plate rotates at regular intervals and at the speed chosen by the customer; when the plate stops, the three work operations take place at the same time: the operator loads the fruit and the two mechanisms perform the coring and cutting operations. The OS12 machine consists of welded tubes, on wheels (with brakes) to allow easy movement. The machine is equipped with a stainless steel electrical panel with PLC and inverter for the synchronization of operations. Advantages: • High cutting quality • Very robust machine structure • Compact size • Simple and fast maintenance of the machine • Easy sanitation • Electrical panel built according to EEC/IP 65 standards • Option: self-locking rotating wheels It is equipped with: 2 Slides for the product and for the waste.

Year of construction: 2014, condition: refurbished (used), The Tona Rapid is used to produce slices, segments or sticks from vegetables and fruits or to core products. The product holders ensure optimum alignment of the products and thus excellent quality of the cut. Lsdpspyhtaofx Aaboah 4,500 pieces/h   Max. capacity