Used Segmented for sale (840)

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table Iedpfew T Sc Aox Abcstd A good selection of tooling, segmented and full length

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Iodon Tnzfjpfx Abcetd Complete with segmented and straight tools

Year of construction: 2010, condition: like new (used), Used Trumpf Trubend Series 3000 CNC pressbrake for sale VIDEO BELOW: Used Trumpf Trubend 3120 for sale 3metre x 120ton 6 axis plus pressbrake for sale. Brand/make: TRUMPF Model: TRUBEND 3120 Type: CNC hydraulic Press Brakes New 2010 Location: United kingdom Low hours – 14,000 Specification Convert Specs to Imperial Tonnage 119.749 t / 120ton Type: hydraulic downstroke Overall Length 3.1 m /3metre BH 2.7 m Stroke 199.9 mm Number of axis: 7 axis 5 axis back gauge Weight 18298 (LBS) Control CNC (T3000) 132 Ton X 10′ Trumpf TruBend 3120 CNC Press Brake Year: 2010 Specification from new: Machine – Stable machine frame as welded all-steel construction – Ram, highly resistant to torsional forces – Spherical ram suspension, with ram tilt – Electro-hydraulic downstroking drive with 4-cylinder technology – Proportional valve technology – Modern block hydraulics – Electronic pressure balance – Measuring system with glass scale and frame deflection compensation – Hydraulic oil filled in the machine (lifetime lubrication) – Oil cooler Backgauge System – Backgauge system 2-axes with rack and pinion-drive for X- and R-axis, – 2 pieces back gauge fingers with safe adjustment in front of the machine Itjdpfx Aehtm Ikobcjd Tool Holder – TRUMPF Upper tool clamping, manual and hardened – Lower tool clamping, manual and hardened Crowning – Self-regulating crowning system – Additional hydraulic CNC-crowning Control – Machine control: T3000 colour, DELEM based on Real Time for Windows – USB interfaces for keyboard, mouse, etc. Safety – Footswitch for Emergency up, down and emergency stop – Safety equipment: Side doors and manual shutter roller at the rear Services – Installation, start-up and instruction Options for Backgauge System – Back gauge system 5 axis Options for Tool Holder – Amada US Style fast clamping of upper tool holders (segmented, on entire working length) Options for Safety Device – BendGuard Options for Material Handling – Support bracket (2 pc) Delivery – June 2011 Video below: Used Trumpf V and C series cnc pressbrakes also available in stock for sale. We are always interested in buying used Trumpf pressbrakes and machines such as: TruBend 3066 TruBend 3100 TruBend 3170 TruBend Series 5000 TruBend 5085 Trubend 5130 TruBend Series 7000 TruBend 7050 TruBend 7036 TruBend 7050 TruBend Series 8000 TruBend 8230 Trubend 8400

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 1000x40, working width: 1,000 mm, overall weight: 1,850 kg, total length: 2,300 mm, total width: 1,950 mm, pressing force: 40 t, working range: 1,000 mm, Equipment: safety light barrier, Used Like New Ermaksan 1metre x 40ton 3axis cnc downstroke pressbrake for sale Complete with Cybelec Cybtouch 12 Control Year 2020 Specifications Max. bending length 1metre /1000 mm Distance between column 800 mm Max. pressing force 40 Ton Beam stroke 100 mm Table Width 90 mm Load more specifications Dimensions (Estimate) Length 2300 mm Width 1950 mm Ijdsvy Ewispfx Abcotd Height 1860 mm Weight 1850 kg Complete with lower multi v tooling and segmented upper tooling

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like New Morgan Rushworth Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Morgan Rushworth Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Isdpfjvgc Rtjx Abcetd Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process.

Condition: as good as new (ex-display), Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch Itodpjxab Hvsfx Abcjd - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: new, Year of construction: 2026, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW weight 140 kg Itjdpfx Asxabu Hebcod range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: used, Year of construction: 1990, Technical details: plate thickness: 8 mm cutting range: 300 x 300 mm table-size: 1100 x 900 mm voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch Itjdpou Ictbsfx Abced *

Year of construction: 2012, condition: good (used), Temperature control unit GWK integat it40E-3 Stock no.: 503198 Machine type/ Device type: Temperature control unit Manufacturer: GWK Type: integat it40B-2 Year of manufacture: 2012 Itsdpjyknrhofx Abcjd The gwk integrat 40 is a modular multi-circuit temperature control system that can be integrated into the overall process for segmented mold temperature control. - The component consists of: - Central module integrat 40 B2-WZ2 (year 2012) - Electrical mold module W1 (year 2012) - Hydraulic mold module W1 (year 2012) - Temperature control module it40 T1 (FY 2012) - Electric mold module W2 (FY 2012) - Hydraulic mold module W2 (FY 2012) - Temperature control module it40 T2 (FY 2012) Connected load: 63 A Max. operating temperature: 95° C Heating capacity: 3 kW / segment Cooling capacity: 27 kW Pump output: 0.5 kW Interface: VARAN Voltage: 400-415V 50Hz Circulation medium: Water/water

Condition: used, functionality: fully functional, Year of construction: 1986, Hydraulic Press Brake Make: LVD Model: PPBL 135/40 MNC Year of manufacture: 1986 Technical Details Manufacturer: LVD Model: PPBL 135/40 MNC Year: 1986 Usable bending length: 4000 mm Stroke: 120 mm Press force: 135 t Dimensions: approx. L 4.20 x W 1.40 x H 2.65 m Weight: 8.7 t Equipment • Motorized backgauge 500 mm • Motorized adjustment of bending beam via +/- buttons with digital display Iodeyilu Iopfx Abcstd • Upper tool straight, H 100mm, R 0.65/30°, L = 4000mm, segmented • Lower tool 2-V die V 12/30° + V8/30°, L = 4100mm All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, axle configuration: 3 axles, first registration: 03/2019, total length: 9,500 mm, total width: 2,450 mm, total height: 1,400 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2019, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Unladen weight: 5,400 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Fifth wheel size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year of manufacture: 2018, Turning direction: 2x20 + 1x30 + 1x40 + 1x45 high cube, Extendable chassis: middle / rear, Axle type: SAF = Further Information = General information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 7 mm; Tyre tread right: 6 mm Axle 2: Tyre tread left: 7 mm; Tyre tread right: 5 mm Axle 3: Tyre tread left: 12 mm; Tyre tread right: 12 mm Weights Unladen weight: 5,400 kg Payload: 33,600 kg GVW: 39,000 kg Isdpfx Abexupbdscjtd Functional Loading platform height: 115 cm Environment Emission class: Euro 0 Maintenance APK (MOT inspection): valid until 09/2026 Condition General condition: fair Technical condition: fair Visual condition: fair Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent traders in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, model years, and price segments. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Competitive prices • Professional trading conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of ‘recognizable quality’ • And much more…. Please visit our website for special offers and the complete stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request on our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2014, WEINIG GRECON HS 120 – FINGER JOINTING LINE Basic information: Model: GRECON DIMTER HS 120 LI Manufacturer: WEINIG (Germany) Type of machine: finger jointing line Year of manufacture: 2014 Year of last upgrade: 2022 (addition of ABB automatic feeding system) Net price: €399,000 A) Specification of the finger jointing line - WEINIG GRECON HS 120 finger jointer (year 2014) with brush feeder for wooden components - Two through-feed milling machines for finger joint profile cutting - Automatic glue applicator with quality control (GlueEye Vision system) - Pre-jointing station for aligning elements - Press for joining, with pressing length approx. 6.1 m (6100 mm) - Integrated ABB robotic line – automatic feeding of the finger jointer - Automatic glue suction from a 1000 l IBC with agitator Robotic loading: - ABB IRB 6640 four-axis robot - Two palletizing cells for continuous operation - Maximum length of elements picked by robot: from 110 to 600 mm - Year of robotic cell construction: 2021 Material handling and discharge: - Roller conveyor system with rotators for feeding battens into robot cell - FAMAD DBNA-40T DUO scissor lift at the press (automatic height adjustment, table size 6.0 x 1.3 m) - Roller storage buffer for batten stacks after joint cutting – storage space 82 liner meters B) Technical parameters Material dimensions and range: - Incoming wood length: 110 – 900 mm - Max material width: 150 mm - Max material thickness: 50 mm - Pressing segment length: approx. 6100 mm - Number of milling stations: 2 - Number of scoring units: 4 Isdjyk E H Njpfx Abcstd Drive and power: - Total connected power: 75 kW - Machine weight: approx. 12,800 kg Space and installation requirements: - Required floor length: approx. 14 m - Required width: approx. 10 m Media supply requirements for the line: - Electrical power supply 400 V / 3-phase - Compressed air - Chip and dust extraction - Internet access (control and diagnostics systems) C) Application of the GRECON HS 120 line The GRECON HS 120 line is designed for through-feed finger jointing of short wooden segments into endless slats of up to approx. 6,100 mm in length. Used in the production of: - furniture boards - countertops - structural components - battens and solid wood semi-finished products D) Personnel and number of operators The GRECON HS 120 line with ABB robotic feeding (2 pallet cells, alternating operation) requires only one operator. E) Production process 1. Pallets with pre-sorted wooden elements are delivered to the robot loading cell. 2. The ABB robot picks items from the pallet and loads them onto the belt magazine of the GRECON HS 120 line. 3. The line mills male and female finger joints in a through-feed process. 4. The automatic glue applicator applies adhesive (monitored by the GlueEye Vision system). 5. The pre-jointing station assembles elements to the pre-set length. 6. The cross-cut saw cuts the endless batten to the desired size and feeds it into the press. 7. The press clamps the element until the glue fully sets. 8. Finished slats are placed on the scissor lift, undergo quality control, and are transported to the roller storage buffer.

Condition: new, Year of construction: 2025, New machine immediately available Isdpfx Abjh S Uirocotd Capacity: 1520 x 2.25 mm segment-split upper cheek rail -tool rest -Adjustment of the upper beam by hand lever left/right

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Itodpsfifbbjfx Abcsd Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails Itodpfjfifa Ajx Abced RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control Itedpfx Abjdzp T Nscsd - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Itsdpfxji D Di Se Abcod Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Folding machine with exchangeable segments. Its simple construction ensures comfortable handling. Machine characteristics The folding machine has exchangeable segments on the upper and lower part. It gives extremely broad use for big elements as well as details folding. The segments are made of pressure iron castings, resistant to deformations and of exceptionally high strength. A simple construction secures high operation comfort and a broad range of practical use. The smallest segment possible to clamp is of 25 mm size and the biggest is of 270 mm size with a possibility of place change enable folding of any shape in the quality to be achieved. The sheet metal maximum thickness is 2 mm and the possibility of opening adjustment up to 48 mm make that there is practically no limits for this model. Segment dimensions 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 75 mm 100 mm 150 mm 200 mm 250 mm 270 mm Technical data WORKING WIDTH 1270 mm MAXIMAL SHEET METAL THICKNESS 2,0 mm MAXIMAL OPENING LENGTH 48 mm BENDING ANGLE 0° - 135° Isdpfx Ajmtwtmjbcjtd NUMBER OF SEGMENTS 12 pieces DIMENSIONS 1710 mm x 750 mm x 1420 mm WEIGHT 422 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, Professional Grinding Table for Wood and Metal A filtration device that works well in any environment where grinding operations take place. THE TABLE IS EQUIPPED WITH 2 FANS ON THE RIGHT AND LEFT SIDES. The table features an independent dual filtration system, ensuring the air is thoroughly cleaned of all contaminants! A special high-efficiency radial fan guarantees long operation without the need for frequent replacement of filtration materials. Iodpfsvugxwex Abcstd The eleven-segment worktable makes it easier to position the workpiece and clean the filters. Quick and easy filter replacement. Ventilation system located at the bottom and the side of the table. Separation of "large" and "small" grinding waste. Heat-resistant filter (not fireproof). Spacious metal drawer on the right and left sides of the table. High vacuum (dust filtration efficiency > 99.9%). Technical Parameters: Worktop dimensions: 2060 x 530 mm Motor power: 2 x 1 kW Airflow capacity: 2 x 4000 m³/h Filter dimensions: 493 x 395 x 20 mm Voltage: 230V Overall dimensions: 2160 x 600 x 870 mm Weight: 120 kg Note: The price quoted is the net price. It does not include transportation costs.

Condition: new, Year of construction: 2026, Professional Table for Sanding Wood and Metal. A filtration device that is suitable for use wherever sanding operations are performed. RADIANT FAN, HIGHER VACUUM PRESSURE. Our equipment is installed in carpentry workshops, furniture workshops, and industrial paint shops. Designed for sanding wood and metal. The table is equipped with an independent dual filtration system, ensuring precise air purification from all contaminants! A special high-efficiency radial fan guarantees long operation without the need to change the filtration materials. The five-segment work table makes it easier to position workpieces and clean the filters. Quick and easy filter replacement. The table is equipped with pins and clamps for mounting workpieces. Ventilation system at the bottom and on the side of the table. Filter resistant to high temperatures, but not fireproof. Segregation of "large" and "small" sanding waste. Spacious metal drawer. High vacuum pressure (dust filtration efficiency > 99.9%). Technical Specifications: Work surface dimensions: 1000 x 550 mm Working height: 850 mm Airflow capacity: 4000 m³/h Filter size: 2 x (395 x 495 x 24 mm) Ijdpfx Ajv R Tihebcstd Motor power (S1): 1.0 kW Voltage: 230V Weight: 70 kg Dimensions: 1050 x 600 x 850 mm

Condition: new, Year of construction: 2023, functionality: fully functional, FPT INDUSTRIE GANTRY MILLING MACHINE TECHNICAL SPECIFICATIONS Brand: Fpt Industrie Model: Dinox 350 (IAT) Itodpfx Ajytpfnsbced Year: 2023 2-position PickUp Automatic millesimal head (2 segments) Tool changer CNC: Heidenhain PRICE AND FURTHER INFORMATION UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: excellent (used), total width: 36,000 mm, total length: 90,000 mm, total height: 9,500 mm, For Sale: High‑Quality Steel Warehouse Hall Structure – ASTRON LINDAB Iedjylc Uyspfx Abcstd Good morning, We are offering for sale an exceptionally solid and durable ASTRON LINDAB steel warehouse hall structure with a total area of approximately 2,800 m² and a height of over 8.5 meters. This structure was originally erected in Warsaw for the renowned company PURMO RETTIG HEATING, a global leader in the heating industry. A few years ago, the entire property on which the hall was located was sold and redeveloped into a new residential complex. As a result, the warehouse hall was fully dismantled under the supervision of ASTRON LINDAB representatives. All structural elements were then transported and reassembled on another of our properties, strictly in accordance with ASTRON LINDAB guidelines. The dismantling and reassembly were carried out by a professional, specialized company. Every structural element has been catalogued, labelled, and numbered. Technical Specifications: Total area: approx. 2,800 m² Span width: 36.6 meters Total length: 90 meters Height: 8.64 meters (maximum height 9.36 meters) Number of segments: 14 No internal support columns Modular Sale Option The hall can be sold as two or three smaller modules, for example: 1,500 m² / 1,000 m² / 800 m² Please note: the price of smaller modules is 25% higher. The current market price of a new, identical structure is approximately: PLN 1,700,000 net / EUR 400,000 net Important Information: We are selling only the steel structure, including all steel tension elements and structural bracing, steel structures of the side walls and roof. Roof and wall cladding panels are not included and must be purchased new and installed after erecting the structure. Additionally, we have all original bolts, nuts, and dismantled components, carefully sorted and stored in two large maritime containers. We also possess the original hall design documentation and can provide access to a structural engineer if a new adaptation or a building permit design is required for this structure. This offer represents a unique opportunity for anyone planning to construct a similar warehouse hall at a significantly reduced cost. PRICE: EUR 179,000 netto (750.000zł netto) We invite serious buyers to contact us.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 107/50, The machine is in fully operational condition. Multibend 2000 RAS 74.30 folding machine by RAS Reinhardt Maschinenbau GmbH — a universal folding machine with a swing beam, CNC control, a wide selection of segmented tools, and a working length of 3200 mm, designed for bending steel sheet (400 MPa). A manual or intelligent crowning system is integrated directly into the folding beam to ensure precise and uniform bends along the entire length. Elastic deformations of the folding beam depend on the sheet thickness, strength, properties, processed length, and positioning on the support beam. Sensors integrated into the folding beam detect its actual deflection during the first 10 degrees of bending, and the system sends commands to the actuators, which adjust the convexity of the beam, thus compensating for beam deflection. The control system stores all parameters for each new bend and uses them for subsequent operations. The bend line is always perfectly straight with the set radius, regardless of the metal thickness, length, ductility, strength, or the height and positioning of segments in the bending zone on the beam. Technical specifications: Working length: 3200 mm Max. sheet thickness: 4 mm Minimum bending radius: 1.25 mm × sheet thickness Minimum flange height: approx. 6 mm × sheet thickness Max. opening width of upper beam: 400 mm Adjustment range of folding and lower beam: 80 mm Bending angle: 0–180 degrees Max. bending speed: 70 degrees/sec Max. upper beam speed: UP 44 mm/sec DOWN 90 mm/sec Electrical connection: 7.5 kW Iedoyfm Udjpfx Abcotd Backgauge depth: 10–1550 mm Backgauge adjustment speed: 200 mm/sec Pneumatics: 6 bar CNC control: MULTIBEND 2000 Machine dimensions (L × W × H): 4.5 × 2.1 × 2.65 m Machine weight: 5590 kg Total weight of basic configuration: 5890 kg Year of manufacture: 1997

Condition: used, Nikon Type: VMZ-S3020 XYZ Traverse Paths: 300 x 200 x 200 mm *Type TZ with Objective Lens for Low Magnification: 250 x 200 x 200 mm Display Resolution: 0.01 μm Isdpfx Abeyiy Hbecotd Maximum Permissible Error (MPE): EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum Sample Weight: 20 kg (Guaranteed Accuracy up to 5 kg) Camera: Black & White / Color 1/3 CMOS Camera Working Distance: Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High Mag.) 11 mm / (Low Mag.) 32 mm Type A: 73.5 mm (63 mm with Laser AF) Laser AF Repeatability Range 1),3): 2σ ≦ 0.5 µm Illumination: Type 1, 2, 3, and 4: Incident, transmitted, and 8-segment ring illumination with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left Lens: Episcopic, dark field; Right Lens: Incident, transmitted, dark field Type A: Incident, transmitted, and 8-segment ring illumination with 1 angle of incidence *white LED Power Supply, Power Consumption: AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & Weight: Base unit with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D) 4): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), The minimum order quantity is 8 stations, with the price per station being €4,000. The stations are new. The line consists of stations for profiling shafts with a diameter of 50 mm and an 8 mm keyway. Material feed thickness ranges from 0.4–2.5 mm, with a strip width of 320 mm. There are 8 stations per table, driven by a 15 kW motor with a reduction gearbox. Four sets of stations are mounted on robust steel beams measuring 45 x 700 x 1,500 mm. This allows for quick changing of rollers fitted with various spare modules for finished profiling station segments. This configuration includes two table segments with 8 stations each, providing a total of 16 profiling stations. Isdpfxewxv Nlo Abcjtd The specified price applies per set of stations on a given table. These tables can be configured and assembled according to the required profile—e.g., with 8, 16, 24, or 32 stations. The table features a strip guide and a turk's head, a straightening head, and a profile output device before the guillotine shear, a flying saw, or a fixed take-off table. We offer various configurations of such solutions for these tables. By exchanging the shafts, we can achieve a maximum input width of 550 mm.