Used Segmented for sale (970)

Condition: used, Year of construction: 2008, Technical data: - Manufacturer: Bütfering Lredsyh Hwujpfx Akmou - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 308, total length: 1,610 mm, total width: 890 mm, total height: 1,318 mm, overall weight: 350 kg, type of input current: three-phase, input voltage: 400 V, warranty duration: 6 months, year of last overhaul: 2026, product length (max.): 500 mm, product length (min.): 1 mm, pallet spaces: 1 euro pallets, Equipment: type plate available, Used Rheon KN-135 encrusting machine The Cornucopia KN-135 machine is an ideal tool for use in food production, ranging from the ready-to-eat food segment to the production of confectionery and bakery products. Ledpfx Akszn H Diemeru Technical data: Product weight range: 10-250 g, Capacity: standard version max. 280 kg/h; aluminum version max. 180 kg/h, Output: 20-100 pieces/min., Product length: 0-500 mm, Outer mass to filling ratio: 1:0 - 0:1, Forming: spherical, bar, and strip, Hopper capacity: 2 x 15 l, Belt speed: 2 – 35 m/min., Power: 1.3 kW. Device features: The device is made of stainless steel and other components approved for contact with food, Large and easy-to-use control system, An intuitive programming system ensures easy and user-friendly operation, Electronic memory function for storing 100 recipes, Built-in Product Memory Unit (P.M.U.) stores and retrieves production parameters for up to 100 recipes, Durable and hygienic hoppers, The innovative design of the device prevents the drive section from touching the dough.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Lodpfxszpwuho Akmjru -Top jaws: Jaw set for four-jaw chuck, 8 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 60/72/H47 mm -Total weight: 1.4 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Lrodpfx Akjzpwy Domeu -Top jaws: Jaw set for three-jaw chuck, 7 sets -Jaw width: 20 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 48/60/H40 mm -Weight/set: 0.8 kg

Condition: excellent (used), Year of construction: 2002, Technical specifications: Retrofit in 2026 Working length: 4100 mm Distance between uprights: 3700 mm Press force: 220 tons CNC control: CD2000 (new) Color screen size: 14" Controlled axes: Y1/Y2; X; R Motorized adjustable back gauge Overhang: 300 mm Stroke: 200 mm Automatic crowning Motor power: 20 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17.5 tons Lrodpsznl U Tsfx Akmsu Accessories: Segmented AMADA tools, new Lateral safety devices Condition: The machine is in very good overall condition Only approx. 7,500 operating hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, functionality: unexamined, Year of construction: 1978, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 400 mm, roller diameter: 622 mm, rotational speed (min.): 2 rpm, rotational speed (max.): 4 rpm, rotational speed (distance/time): 4,900 mm/min, pipe diameter (max.): 254 mm, tube wall thickness (max.): 10 mm, overall weight: 22,000 kg, total length: 3,900 mm, total width: 2,600 mm, total height: 3,300 mm, Equipment: emergency stop, BOLDRINI BSA 40 – Heavy-duty profile bending machine / roll for profiles For sale: a heavy-duty industrial profile bending machine, model BOLDRINI BSA 40, manufactured by BOLDRINI S.p.A., Italy. The machine is designed for bending and rolling metal profiles, tubes, angle profiles, rails, flanges, T-profiles, double T-profiles, and other structural elements with a large radius. It is suitable for the production of metal structures, halls, shipbuilding, tubular structures, tanks, flanges, and heavy industrial fabrication. Lsdpfxozilzve Akmjru Key data: Manufacturer: BOLDRINI S.p.A. Model: BSA 40 Year of manufacture: 1978 Serial number: 5936 Machine type: profile bending machine / angle bending roll / section bending machine Working system: 3 rollers Control: manual / electromechanical Drive: electric Weight: approximately 22,000 kg Condition: used, stored outside of a production line Available tools: set of rollers, dies, segments, and additional attachments, as shown in the pictures Approximate capacity according to model BSA 40: Angle profile: up to approximately 203 x 203 x 25 mm Tubes: up to approximately Ø254 mm Suitable for: tubes, L-profiles, T-profiles, double T-profiles, rails, flanges, and profiles with a large radius Equipment and features: The machine has a robust, heavy-duty construction, large working rollers, and mechanical adjustment via screw spindles. Working rollers, profile dies, additional segments, and attachments for various types of profiles are available. The electrical panel is present and includes contactors, relays, fuses, a transformer, terminal blocks, and controls. The machine has not been tested under load at the moment. Visible surface corrosion is present on some of the rollers, tools, and housing due to outdoor storage. An on-site inspection and electrical/mechanical check are recommended before commissioning.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Lredpfozw E Ilox Akmeu -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 180/135/H85 mm -Total weight: 10.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Ledpfx Akjzw E Ixsmeru -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/105/H65 mm -Total weight: 4.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm Lsdpozw E I Sjfx Akmjru -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H67 mm -Total weight: 3.7 kg

Condition: new, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2EG056013, overall weight: 120 kg, Equipment: documentation/manual, HEUFT PRIME Full-product inspection / inspection system with DELTA-FWb reject system Manufacturer: HEUFT Systemtechnik GmbH Offered are components of an industrial HEUFT system for automatic full-product inspection and defect rejection in filling and/or packaging lines. Base unit HEUFT PRIME Full-product inspection Type/Designation: HBBPRIXXX In-line inspection system for filled containers Modular system for quality control Depending on the available equipment, inspection of fill level, closures, labels, and other quality characteristics Lsdpfx Aezwmkzjkmsru Automatic product tracking Connection of reject systems for removing defective products Automatic height adjustment of the detection units for format changes Touchscreen / HEUFT-NaVi operating concept Manufacturer's stated series performance: up to 72,000 containers/h* Reject system / Rejector HEUFT HBM100036 LI16 10.05 DELTA-FWb SPECTRUM Multi-segment reject system 16 segments Design: left / Left For the automatic removal of detected defective containers Suitable for industrial filling, beverage, and packaging lines. The unit is new and unused, and has only been unpacked for a completeness check.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Lrodpezu Akrsfx Akmou Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: used, Year of construction: 1996, Working width: 520 mm Planer shaft: Tersa Number of knives: 4 Jointing table length: 2300 mm Jointing fence angle adjustable: yes Jointing tables folding: pneumatic Maximum thicknesser pass height: 250 mm Thickness table height adjustment: electric Thickness indication: digital Lrsdpfx Akoy A Hh Temsu Feed speed: 5 / 8 / 12 / 19 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 5.5 kW Motor brake: yes, automatic Extraction connection: 120 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Category type: Sander - Polisher Volume: 1 - 1 Convert Sells to: Worldwide I sell the widebelt sanding machine COSTA S CCTT 1350 Configuration 1pc. hard rubber cylinder 1pc. soft rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed Pressure shoes for short elements Lrsdpowrm Sdjfx Akmju Air-blow on all units Vacuum underpressure table with integrated ventilator Designed for the line with fixed working height and moving aggregates 4 motors total power 96kW Condition very good ! Available immediately

Condition: used, Year of construction: 2005, Technical Specifications: - Manufacturer: Costa - Model: SA TS 1350 - Year of manufacture: 2005 - Working width: 1,350 mm Lrjdpfsx Ex Tmjx Akmju - Sanding belt dimensions: 2,620 x 1,380 mm - Sanding heights: 3–160 m - Feed speed: 5–25 m/min. - 1st Unit: - Longitudinal sanding unit - Belt dimensions: 2,620 x 1,380 mm - Electronic sanding shoe, Costa system - roller spacing: 32 mm - Segment width: 32 mm - Drive motor power: 11 kW - Dust removal brush diameter: 180 mm - Operator side: left - Height adjustment: motor-driven - Vacuum conveyor belt - Total power connection: 20 kW / 43 A - Width: 1,924 mm - Length: 2,059 mm - Height: 2,185 – 2,375 mm - Exhaust connections: D 2x100 mm + 2x160 mm - Airflow: 4,830 m³/h at 24 m/s - Compressed air: 6 bar, 880 NL/min. - Volts, Hz: 400 / 50 - Voltage fluctuations: max. ±5% - Weight: 3,100 kg - Location: Blomberg warehouse

Condition: excellent (used), Year of construction: 2013, Weinig Powermat 600 automatic profiling machine, net price €68,800. Technical data: Ledeytd S Nspfx Akmeru Year of manufacture: 2013 Working width (with a cutting circle of 93 - 125 mm): 20 - 230 mm Working height (with a cutting circle of 93 - 125 mm): 10 - 120 mm 7 spindles First lower horizontal spindle: 5.5 kW (7.5 HP) motor First right vertical spindle: Shared motor with the left vertical spindle: 11 kW (15 HP) First left vertical spindle: Shared motor with the 1st right vertical spindle Second right vertical spindle: 5.5 kW (7.5 HP) motor First upper horizontal spindle: 7.5 kW (10 HP) motor Second upper horizontal spindle: 7.5 kW (10 HP) motor Second lower horizontal spindle: 5.5 kW (7.5 HP) motor Electronic feed with brake, steplessly adjustable: 5 - 30 m/min Motor: 4 kW (5.5 HP) Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors are IE2 rated. All spindles with high rotational accuracy. Standard equipment for PowerLock. Planing table length: 2 m (including a longitudinal guide) Marathon Coating for the machine table and guides Special coating for protecting the table segments and guides against excessive wear. Recommended for machining abrasive materials (e.g., tropical wood, MDF, chipboard). OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 mm Tool diameter max. 300 mm Tool length: 0 - 240 mm Radial measuring range (radius): 150 mm Non-contact measurement of tool dimensions, radius (R), and height (H), with display on electronic digital displays. Electronic digital displays indicating tool radius and height. HSK63 tool holder for PowerLock tools NEW: PowerLock HSK63 adapter, shank D=50 x 260 mm 2. ROUTER HEADS WITH POWERLOCK MOUNTING, price €7,500 Two cabinets full of router heads for various applications, approximately 45 pieces.

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR, approx. 100 cbm, 14.9 m internal length silver-grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal length of the body: +/- 14900 MM Internal width of the body: 2475 MM Volume of the body: approx. 98.6 cbm GVW: 36 T Wheelbase: 1310 MM Unladen weight: 8500 kg Saddle height: 1150 mm TECHNICAL DESCRIPTION 1. CHASSIS SADDLE HEIGHT The exact saddle height is 1150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 T Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: included Lrjdpfx Ajxplxzekmju The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a trailing steerable axle. CONNECTION BRAKE WEAR INDICATOR (BVA) Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION Lifting and lowering device. Aluminum air tank. LOCKING OF TRAILING STEERABLE AXLE Locking of the trailing steerable axle is done as follows: - via the rear lights - with a button in the truck (truck equipment not included) TIRES 6 x 385/65 R 22.5 tires for regional transport (manufacturer's choice) on aluminum rims ALCOA MATT. ET 120. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-circuit compressed air brake system acc. to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets ISO connection. Aspöck set. Orange LED lighting is mounted on the side of the trailer. Without distribution box at the rear - NORDIC. REAR LIGHTING IN THE UNDER RIDE GUARD The lighting is mounted in the fixed aluminum under-ride guard. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. HYDRAULIC CONNECTION Connection on the front wall. With additional connection option below the body in front of the support legs. ACCESSORIES RETRACTABLE LADDER REAR Retractable ladder integrated at the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking. TOOL BOX PVC tool box with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER Aluminum spare wheel holder (single) 2. TIPPER BODY FRONT WALL The front wall consists of sturdy aluminum plank profiles. SEAL BETWEEN FLOOR AND FRONT WALL Fixed seal between the floor and front wall by means of an aluminum profile and PVC seal. SIDE WALLS Side walls in smooth design, inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside. WEAR PLATES Wear plate in aluminum, rectangular, on the inside at the rear, 2000 (L) x 1500 (H) x 4 mm. TIPPER FLOOR SYSTEM CARGO FLOOR CF 500 SL-C Electric operation. 21 slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. End plate at the rear made of stainless steel. OPERATION OF FLOOR SYSTEM Electric operation - electrically with remote control (original Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation by means of a unique red Cargo rotary knob. TIPPER FLOOR FRAME Frame for wheelbase 7850 mm. 21 slats. FLOOR SLATS 21 aluminum slats - 8 mm ribbed with welded aluminum end caps. REAR DOOR 2 doors

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NCG3021L(LL) is a high-performance CNC nesting machining center engineered for automatic cutting, drilling, grooving, and part labeling, all within a fully integrated and automated workflow. This model incorporates automated loading, unloading, and labeling systems, delivering comprehensive automation, intelligent operation, and IT-driven production efficiency. Its open software interface enables seamless connectivity with furniture design suites and ERP platforms, ensuring fully optimized and data-driven panel processing. The professional FCC optimization software enhances cutting efficiency, minimizes material waste, and facilitates streamlined production management. This machine represents an ideal solution for advanced furniture manufacturing by reducing labor expenses while maintaining high standards of precision and productivity. Key Features - Automatic loading and unloading system equipped with a 3-ton lift table, pre-push device, and safety curtains for efficient material handling. - Rotary labeling system with integrated Honeywell printer, facilitating simultaneous labeling and machining operations. - Robust vacuum worktable (3100×2150 mm) segmented into 10 independently controlled zones, guaranteeing powerful and uniform vacuum suction. - Dual 7.5 kW oil-cooled vacuum pumps deliver maximum suction power at low noise levels. - High-rigidity gantry frame ensures enduring precision and operational stability at high processing speeds. - Italian-made 12 kW main spindle (HSK-63F, ATC, 24,000 rpm), featuring internal and external air blast for optimal dust extraction. - 12-position automatic tool changer (ATC) enables rapid tool changes, supporting a wide range of complex machining tasks. - 21-spindle drilling block designed for precise vertical and horizontal drilling operations. - Automated lubrication system minimizes maintenance needs and prolongs component life cycle. Ljdpfx Akexcwnbsmoru - Advanced dust extraction system with front and rear collection points maintains a clean working environment. - Comprehensive safety design includes a protective fencing system and optional optical barrier for maximum operator security. - User-friendly SYNTEC CNC control system compatible with MPR, DXF, TCN, and standard NC file formats. Technical Specifications - Working area: X: 3100 mm / Y: 2150 mm / Z: 50 mm - Worktable height: 1010 mm - Maximum traverse speed: X/Y axes 70 m/min, Z axis 20 m/min - Main spindle: 12 kW, HSK-63F, 24,000 rpm - Tool changer: 12-position servo-driven ATC - Drilling block: 21 vertical spindles, 2.5 kW, 4000 rpm, max drilling diameter 35 mm - Vacuum pump capacity: 2 × 7.5 kW, 250 m³/h - Total installed power: 47 kW - Machine dimensions: 13,800 × 3,950 × 2,600 mm - Weight: 6,000 kg - Power supply: 380V / 50Hz / 3-phase Applications - Panel furniture manufacturing (kitchen cabinets, wardrobes, office furniture) - Nesting-based cutting and drilling of MDF, particleboard, and plywood - Automated production lines with integrated labeling for Industry 4.0 smart factories Advantages - Complete solution: automated loading, nesting, drilling, grooving, labeling, and unloading in a single workflow. - Outstanding efficiency: optimized software paired with dual synchronized gantries doubles processing throughput. - Labor saving: minimal operator involvement required. - Ideal for large-scale production: stable operation, precise machining, and consistently superior product quality.

Condition: good (used), functionality: fully functional, roll diameter: 60 mm, roll width: 855 mm, total width: 880 mm, total length: 4,46,000 mm, conveying length: 4,46,000 mm, axle spacing: 145 mm, frame height: 80 mm, Pallet conveyor/roller conveyor approx. 446 meters Manufacturer: BITO Condition: Used Color: Galvanized Stock: approx. 446 meters Overall width: approx. 880 mm Roller width: approx. 855 mm Fork width: approx. 855 mm Axle spacing: approx. 145 mm Roller diameter: approx. 60 mm Material: Steel (galvanized) Frame height: approx. 80 mm System consists of 185 segments: 28 segments: approx. 2110 mm length 14 segments: approx. 2130 mm length 12 segments: approx. 2350 mm length 2 segments: approx. 2490 mm length 9 segments: approx. 2710 mm length 16 segments: approx. 2830 mm length 49 segments: approx. 2850 mm length 38 segments: approx. 3025 mm length Each segment has 1 to 2 braking rollers (roller diameter: approx. 80 mm) Price per meter, net Feet to be ordered separately Lsdpfxouh Tbms Akmsru Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) The conveying system was in operation until it was dismantled. Due to the excellent workmanship of the conveying system, your material will be gently conveyed to its destination, even under high load. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We will gladly prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trade, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers.

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. Lrjdpfx Akof Eywwjmou The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, Finger bending machine with a segmented top clamp Including a manual back stop Lredpfxjga T Dho Akmju PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 45 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. bending angle ----- 0 - 135 Weight ----- 360 KG Width ----- 1620 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: good (used), We are offering a used roller conveyor section from the manufacturer Bito for sale. The scope of delivery includes: 01x roller conveyor section, used Manufacturer: Bito Frame material color: galvanized Roller material color: similar to cream white Segment length: approx. 1,580 mm Segment width: approx. 38 mm Roller width: approx. 25 mm Pitch: approx. 25 mm Roller diameter: approx. 20 mm Frame height: approx. 25 mm Roller material: plastic Lodpog Iimfefx Akmjru Shipping costs upon request.

Condition: used, pressure 70 t chamfer lenght 2600 mm Lrodjtqqqispfx Akmeu distance between columns 2750 mm stroke 60 mm weight of the machine ca. 4,3 t dimensions of machine L x W x H 4,45 x 1,30 x 2,53 m Accessories: upper and lower die (each in segments) on 2500 mm length, 2 upper die segments each 835 mm long, back stop

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 4,020 mm, total width: 4,020 mm, Due to restructuring, we are selling a premium segment automatic screen printing press suitable for ambitious beginners and professionals, consisting of: TAS textile screen printing press, model 203 RA L (year 2001) incl. spare parts worth approx. €300 - Excellent condition / low usage - 10 pallets / 8 colors - Extra-large print area: max. 500 x 620 mm - Max. frame size: 660 x 930 mm - Incl. intermediate dryer 9.0 kW (variable application) - Drive type: pneumatic - Pneumatic screen clamping - Central lift-off device - High-quality components from renowned manufacturers used (e.g. FESTO, EBM Pabst, ...) - Two sets of pallets - Includes various print and flood squeegees Recently, a large proportion of hoses were replaced and a pneumatic cylinder was completely overhauled! Included spare parts: - 3x pneumatic cylinders for screen holders - 1x switch for screen clamping (Bosch) - 1x regulator for print and squeegee speed (Bosch) - 5x squeegee holders Lodpfx Aksz En Inemoru - 1x silencer (Riegler) - Pneumatic hose (Festo) - Various hose connectors (Festo, Riegler) - Various plugs Once correctly installed, the press delivers highly precise prints, runs smoothly, and is extremely durable by design. We are happy to answer any questions you may have! NOTE for German buyers: There is a German company specialized in servicing and supplying spare parts for these premium machines, ensuring professional maintenance and parts availability. The price is NET (excluding VAT)!

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Lrsdpownz Apofx Akmsu Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 2,480 x 1,550 mm ZHS – economical all-rounders The ZHS series features a load-dependent, hydraulically actuated pusher that feeds material horizontally to the rotor in a slightly inclined position. The material is cut between the rotor and stator blades until it passes through the screen, which is bolted and mounted underneath the rotor. The interchangeable screen determines the final particle size. The shredded material can be discharged via conveyor belt, discharge screw, or pneumatically using an extraction system. The ZHS single-shaft shredders are designed for light to medium-duty applications in the plastics industry. Lrsdpfx Aoyr I Irokmou Technical details: • Roller-mounted hydraulic pusher with horizontal movement • Bolted knives and knife holders • Optional segmented floor for particularly thin parts and materials • Rotor aggressiveness can be reduced or increased by bolting in filling pieces • Can be integrated in a two-stage system with a granulator as a pre-shredder