Used Services for sale (14,510)

Condition: used, functionality: fully functional, power: 35 kW (47.59 HP), fuel type: diesel, empty load weight: 5,635 kg, Year of construction: 2022, operating hours: 956 h, total length: 4,000 mm, construction height: 2,550 mm, drive type: Diesel, construction width: 1,970 mm, Mini excavator Hodpo Ahvdmsfx Accefp Condition: Like new Technical condition: very good Description: Kubota KX excavator, year of manufacture 2022 - - 956.4 operating hours - - 5635 kg operating weight - - - MARTIN power tilt - - - hydraulic quick coupler - - 3 pcs. digging buckets, 30 cm - - 1 pcs. ditching bucket, 140 cm - - cabin, heater, work lights - - AIR CONDITIONING - - - 4-cylinder Kubota diesel engine, 47 hp - - - major service performed - - - simple, robust mini excavator - - like-new machine in SUPER CONDITION - - incl. operating manual, spare key, etc.!! Price 69,000.00 EUR incl. VAT. DIFFERENTIAL TAXATION (VAT cannot be shown separately) Quick coupler, buckets, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, CE certificate.

Condition: used, mileage: 50,130 km, power: 350 kW (475.87 HP), first registration: 06/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2027, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter, Mercedes Benz AROCS 5 1848 AS 4X4 Registration (optional) as a forestry tractor with a speed of 60 km/h First registration 06/2024 Mileage only 50,130 km StreamSpace cab, 2,300 mm wide, 1 bunk, cab air suspension, light sensor, rain sensor, electric lift roof, air horns, driver’s comfort suspension seat with seat heating and seat climate control, comfort lower bunk, leather steering wheel, digital DAB+ radio, sound system, refrigerator on the engine tunnel, interactive multimedia cockpit, STABO CB radio, hot water auxiliary heater, waste heat recovery, additional cab insulation, air conditioning, construction site interior filter, FULL-LED lighting, LED headlights, LightFix roof lamp bar with 2x triple-LED spotlights and 2x LED rotating beacons, Hsdpfx Acs Aiymgjcofp Mercedes PowerShift3 12-speed, PowerShift Advanced, OffRoad driving program, Transmission oil cooler Tires 385/65 R 22.5 and 315/80 R 22.5 (also available with agricultural tread/low-pressure tires 445/65 and 600/50 R 22.5) Fifth wheel height approx. 1,320 mm Wheelbase 3,600 mm Aluminum tank on the left, 290 L. 2-line tipping hydraulics MEILLER high-pressure and low-pressure system, large oil tank 200 L. Electronic braking system, ABS can be deactivated RETARDER Predictive Powertrain Control RENTING is the new BUYING; with us, a full-service rental is immediately available.

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Hjdpozil R Rjfx Accofp Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Vötsch Temperature shock chamber / Thermal shock chamber Vötsch ShockEvent T/120/V2 temperature shock chamber Hot chamber up to +220 °C / Cold chamber up to -80 °C Workshop-checked – water-cooled version with 120-liter test chamber volume For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature shock chamber is suitable for thermal cyclical testing, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system has a hot chamber and a cold chamber. The test item is transported between the two temperature zones using a mobile test trolley. This allows for rapid temperature changes to test the thermal resistance. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: ShockEvent T/120/V2 Device type: Temperature shock chamber / Thermal shock chamber Year of manufacture: 2018 Hot chamber: up to +220 °C Cold chamber: up to -80 °C Two-chamber temperature shock system Humidity control: not available Water-cooled version Temperature data according to manufacturer's brochure: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +100 °C Temperature change by transporting the test item between the hot and cold chambers Temperature change rates according to manufacturer's brochure: Heating rate, hot chamber: approx. 18 K/min Cooling rate, cold chamber: approx. 7.5 K/min Refrigerant 1: R449A Refrigerant quantity: 1.70 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.30 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 14 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Test chamber volume: 120 liters Internal dimensions (H × W × D): 410 × 470 × 650 mm External dimensions (H × W × D): 2,450 × 1,000 × 2,530 mm Weight: approx. 1,000 kg Dimensions and weight according to manufacturer's brochure for the basic unit of the T/120/V2 model series. Deviations due to equipment features are possible. Equipment: Two separate temperature chambers Hot chamber and cold chamber Mobile test item trolley Digital control and operating unit Temperature control Water-cooled version Cooling water connections for supply and return Temperature shock operation Temperature change between hot and cold chambers Electrical connection: 400 V / 50 Hz Refrigeration system with R449A and R23 Temperature monitoring Test item support in the mobile trolley Application areas: Temperature shock testing Thermal cyclical testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to pictures Hodpo Ah Shwsfx Accefp Scope of delivery: 1x Vötsch ShockEvent T/120/V2 temperature shock chamber Accessories according to pictures The table shown in the photos, or any other items not explicitly mentioned, are not part of the sale. Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / corrosion testing cabinet Weiss SC/KWT 450 salt spray chamber Testing system for salt spray, corrosion and coating tests For sale is a used salt spray chamber from Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, as well as industrial testing and development applications. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Device type: Salt spray chamber / corrosion testing cabinet Size: 450 l Test chamber volume: approx. 360 l Brine reservoir: approx. 180 l Test chamber dimensions: approx. 850 × 570 × 740 mm (W × D × H) External dimensions: approx. 1,930 × 800 × 920 mm (W × D × H) Weight (empty): approx. 140 kg Max. test part weight: 100 kg Max. load per rod: 8 kg Brine consumption: approx. 0.5–1 l/h Compressed air consumption: approx. 1.5 Nm³/h Demineralized water consumption: approx. 0.4 l/h Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Permissible operating overpressure: 6 bar Equipment: Programmable control unit Test chamber with sample holders Brine supply system Compressed air treatment Connection for demineralized water Exhaust connection Hfjdpfszzzpgjx Accjp Brine drain Documentation / operating documents available Accessories according to the pictures Areas of application: Corrosion testing Salt spray testing Coating testing Material testing Quality assurance Automotive industry Research and development Scope of delivery: 1x Weiss SC/KWT 450 salt spray chamber Sample holders according to the pictures Original operating/service documents Accessories according to the pictures Condition: Used Optical condition according to the pictures Normal signs of wear and tear due to age and use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Hodpszcn Efefx Accsfp Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of manufacture: 2015 Machine type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser system: Dual Laser Material processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototyping, and industrial series production. BC2 upgrade / modernization The system has been upgraded to the newer BC2 system standard. According to the available documentation, a comprehensive retrofit was carried out, involving the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system standard compared to earlier X Line 2000R models. Technical data Build volume (X x Y x Z): 800 x 400 x 500 mm Mains connection: 3P/N/PE AC 400 V ±10 % Frequency: 50 / 60 Hz Max. current consumption: 17 A per phase Compressed air supply: 7 - 8 bar Inert gas supply: 5 bar Cooling: water-cooled system Machine dimensions approx.: 5,300 x 2,700 x 2,760 mm (L x W x H) Weight approx.: 13,400 kg Equipment Dual laser system Powder handling system Material conveying system Filter units Process gas supply Control cabinet technology Operating and control system Work platform with access ladder Water-cooled laser system Existing peripherals as shown in the pictures Documented service work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-box replaced Functional test performed No error messages documented after completion of the work Operating data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Application areas Additive manufacturing of metal components Aerospace industry Automotive industry Tool and mold making Research and development Prototype manufacturing Industrial series production Scope of delivery Concept Laser X Line 2000R BC2 main unit Powder handling components Filter technology Existing peripherals as shown in the pictures Further accessories according to the existing scope of delivery Condition Used Machine from industrial production Laser window clean and clear Optical condition as shown in the pictures Inspection possible by appointment Availability: upon agreement. Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: good (used), Year of construction: 1999, For sale is a water treatment plant of make ENVOTECH and type 0320 from 1999. In 2016 a new reaction tank of the brand Leiblein, made of stainless steel, with the dimensions of 500*500*400 mm was added. The plant is fully functional and the contact details of the competent service technician are available and can be forwarded at the time of purchase. Technical data & information: - Executed in stainless steel - Including oil separation by coalescence principle - Including automatic cleaning - Built-in pump for waste water, concentrate and distillate - Frequency control of the compressor motor - Type: 0320 - Rated capacity l/h: 320 Energy consumption - In operation: 25 kW - Maximum power: 35 kW Supply voltage: 3*400 V - 50 Hz Dimensions lxwxh: 245x155x265 Face: ca 2600 kg Sound pressure level: 75 dB All data refer to operation with water On request, loading and shipping can be organized throughout Europe. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Ch3mj0l3eg Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Hfedpfx Acjpl Tqtecjp Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 153888, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 20 kg, total height: 1,770 mm, type of input current: DC, total width: 1,351 mm, total length: 1,055 mm, year of last overhaul: 2022, ambient temperature (max.): 35 °C, ambient temperature (min.): 17 °C, Equipment: lighting, For sale: Optical-Tactile Measuring Machine Hfodpfxjylkfao Accjp The device is in excellent condition and has been serviced regularly and professionally. Calibration certificates are available. Technical data: Measuring range: 400 mm x 400 mm x 400 mm Year of manufacture: 2011 Sensor technology: Optical: ZEISS Discovery zoom lens Tactile: VAST XXT probing system Software: ZEISS CALYPSO Additional software: CALYPSO Freeform Surface BasLic; dongle-based basic license for the current software version Accessories: • Computer, mouse, keyboard, monitor • Smooth calibration sphere (for tactile probe) • Matte calibration sphere (for white light interferometer) • Calibration standard – optical • Calibration standard – tactile • 3 probes: reference probe, 3x50, 1x20 with 30 mm extension • DAkkS calibrated in 2022 • Software: Calypso 2019 dongle license • Tactile probe head • Optics • White light interferometer • 3-position probe change rack • Operating manual • Additional software: CALYPSO freeform surface, BasLic, dongle-based basic license for the current software version Transport and loading can be organized on request, at an additional cost, Europe-wide. Prices are subject to VAT. Viewing by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Gjbn N Ay Dowza Dxogoil Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1, power: 30 kW (40.79 HP), overall weight: 2,450 kg, fuel type: electric, Agro Bio Brichet Energy Solutions – A Leader in Biomass Processing Technologies Since 2010, Agro Bio Brichet Energy Solutions has been transforming biomass into energy and value. We provide complete, turnkey briquetting, pelletizing, and granulating lines, including consulting, design, delivery, commissioning, servicing, and technical support. We represent more than 25 European brands with a long history, strong values, and proven reliability, including Robust, MÜNCH-Edelstahl, La Meccanica, BS Bollareto, AM Tehnolog, General Dies, Gama Pardubice, Radviliskis Machine Factory, NPT Nawrocki, and Labora Energy. Because we work with many brands, we can choose the right technology for each client’s raw material and goals, without being limited to a single manufacturer. We have completed more than 135 projects in Romania and across Europe, including France and Austria. We have converted straw, sawdust, compost, and agricultural residues into briquettes, pellets, organic fertilizers, animal feed, and bedding. Our portfolio also includes equipment for drying, shredding, carbonization, fermentation, and recycling. Our machines are automated and energy-efficient, with low power consumption. In addition to the manufacturer’s warranty of 1 to 2 years, depending on the product, we offer an additional 3-year dealer warranty, so our clients receive up to 5 years of coverage. We also provide consulting on accessing EU funds and financing options. ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile, etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor that helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal, and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: 1 Shredder 30 kW 2 Equipment: Secondary cutting blade HARDOX® 450 3 Equipment: Pusher rack 4 Equipment: Hi-Lo "TURBO" hydraulic aggregate 5 Equipment: Heavy-duty gearbox (30 kW) 6 Equipment: Remote access 7 Equipment: Conveyor belt RZC 350-6500 "Z" Type 8 Equipment: Frequency converter RZC 350-6500 Shredder 30kW: ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Weight: 2450 kg Hfjdpfx Aco Airfrscsp RZC 350-6500 - Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator - belt magnet – additional cost ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0.5 kg/s ✔ Power: 0.25 kW ✔ Transport wheels 2 years warranty or 2000 operating hours.

Condition: like new (used), Year of construction: 2023, operating hours: 180 h, functionality: fully functional, machine/vehicle number: ITR1822394, total height: 1,800 mm, space requirement length: 800 mm, space requirement width: 800 mm, space requirement height: 1,800 mm, motor manufacturer: Otto Klein, power: 52 kW (70.70 HP), operating pressure: 30 bar, type of cooling: air, For sale is a professional high-pressure compressed air station from Atlas Copco, model LT7-30UV BM. The unit was manufactured in 2023 and is in excellent, almost as-new condition. With only 179.9 operating hours, the machine is barely broken in. The LT series from Atlas Copco is the benchmark for industrial high-pressure applications and is renowned for its extreme durability, low operating temperatures, and long service life. A particular highlight is the premium, hot-dip galvanized 350-liter air receiver, specially designed for high-pressure use (up to 36 bar operating / 51.5 bar test pressure) to offer maximum corrosion protection. Technical Data Hodpfoy Anb Iex Accofp Manufacturer: Atlas Copco Model: LT7-30UV BM Year of manufacture: 2023 Condition: Excellent / Nearly new Operating hours: approx. 180 h Max. operating pressure: 30 bar (435 psi) Free air delivery: 6.4 l/s (~ 23 m³/h) Motor power: 5.16 kW 400V / 3 phase / 50 Hz Speed: 1,500 rpm Receiver: 350 liters, hot-dip galvanized Certifications: CE, EAC, UKCA Reference number: 8115460928 Serial number: ITR1822394 On request, transport and loading can be arranged Europe-wide for an additional fee. Price plus VAT. Inspections available by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or would you like to sell your equipment? For further information or to get in touch, please visit our website.

Condition: used, Stäubli Type: Stäubli Robot RX160 and CS8C controller with handheld device, software, and PC. Measuring Robot Measuring robotics for measuring, analyzing, and evaluating quality characteristics. RobFlow (measuring robotics software) Full version and dongle on an integrated Siemens industrial PC. 6AG4114-1NC22-4EX0 Laser Distance Sensor Model ILR 1181-30 Technical Data: Measuring range 0.1 … 50 m on natural, diffusely reflecting surfaces, 50 m up to a maximum of 150 m on a reflector panel. Linearity ±2 mm (+15°C … +30°C), ±5 mm (-10°C … +50°C) Resolution 0.1 mm Repeatability ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at a distance of 10 m Beam diameter < 35 mm at a distance of 50 m Beam diameter < 65 mm at a distance of 100 m Hfedpfx Acjzdyt Aocjp Laser divergence 0.6 mrad Operating temperature -10°C … +50°C Storage temperature -20°C … +70°C Applications: RobFlow is a modular system. The scope of functions of the standard package can be expanded with additional plugins for specific tasks and customer-specific extensions. With the available functions, the following applications can be implemented, for example: Infotainment testing: Optical and haptic tests Individual operations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column testing: Haptic tests along complex paths Large measuring range thanks to a multi-calibrated force/torque sensor Easy to program thanks to RobFlow Air vent end-of-line testing: Haptic and optical tests Interchangeable test adapters for a variety of devices Automatic testing, evaluation, and labeling including integrated leak test Vehicle seat testing: Functional and haptic tests Headrest distance measurements Comfort and stiffness assessments Service life and fatigue tests The advantages of RobFlow at a glance: User-friendly operation No programming language skills required Variable and dynamic test sequences Branching sequence control Easy exchange of test programs between development and production Extensive analysis and evaluation functions Graphical measurement data display and report generation Flexible and expandable through plug-in architecture Stäubli Robot RX160 with 379 operating hours Controller CS8C RX160 Lifting capacity (nominal load - kg) 20 kg and handheld device SP1 Total weight 500 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Werth Werth Messtechnik Scope-Check 650×750×500/MB/Z – 3D CNC Coordinate Measuring Machine For sale is a high-quality 3D CNC coordinate measuring machine from the renowned company Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This machine is impressive due to its precision, reliability, and versatility in industrial metrology. Features & Properties: CNC-controlled 3D coordinate measuring machine Hsdpszii Dzefx Accjfp Multi-sensor capable (optical and tactile measurements possible) Version with Moving-Bridge system (MB/Z) for high stability and flexibility High precision in measuring complex workpieces Robust design, intended for continuous industrial use Suitable for quality assurance, production monitoring, and development areas Additional equipment – Renishaw TP200 probe system The highly precise, tactile Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It enables quick probe tip changes and precise measurements with long probes. Key features: Strain gauge technology: Minimal deflections are registered with high accuracy – typical errors such as "lobing" are eliminated. High precision: Repeatability up to 0.4 µm, 2D probing uncertainty ±0.8 µm. Fast changeover: Automatic probe tip changeover with SCR200 changeover magazine, no recalibration required. Robust: Service life of the probe tip modules over 10 million probing operations. Flexibility: Standard (SF) and low-force modules (LF) for sensitive materials. Compatibility: Can be used with Renishaw PH10 probe heads and extensions up to 300 mm. Technical specifications (excerpt): Connection: M8 connector, Interface PI200 Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) Probing force XY: 0.02 N, Z: 0.07 N Overload force XY: up to 0.4 N, Z: up to 4.9 N Weight (sensor + module): 22 g Probe tips: M2 Technical data: Manufacturer: Werth Messtechnik Model: Scope-Check 650×750×500/MB/Z Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm Supply voltage: 115–230 V AC Power consumption: max. 10 A Weight: 1360 kg Scope of delivery: Werth Scope-Check 650×750×500/MB/Z Renishaw TP200 probe system incl. probe tip modules Accessories as shown in the attached pictures Important note: "The table shown in the photos is not included in the sale." (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4 C) High-performance disk laser with up to 6.6 kW   Type: TruDisk 6602 (4 C)   The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser with approximately 6.6 kW continuous power – perfectly suited for welding, cutting, and surface treatment processes on metals such as steel, aluminum, copper, etc.   System type: TruDisk 6602 (4 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5   Hfodszii D Ijpfx Accop No further testing was carried out in-house. The operating hours could not be read. The laser ran perfectly until the end.   Key technical features: Power: 80 W to 6600 W continuously adjustable, max. 6.6 kW machine tools Beam quality: < 2 mm·mrad for excellent focus handling Wavelength: 1030 nm (infrared), also adapted for green wavelength in special models Output options: Up to 4 laser outputs (4C) for simultaneous supply to multiple process cells Cooling system: Integrated heat exchanger (up to 28 °C inlet temperature), optional compressor cooling (up to 38 °C) Modular and service-friendly: Compact design (< 1 m² footprint), modular components for fast service   Advantages & Applications Maximum process stability: Real-time power control ensures reproducible results Reflection resistance: Patented resonator design allows welding of reflective metals such as copper/aluminum Industry 4.0-capable: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance Energy efficiency: Up to 50% less power consumption thanks to intelligent pulse control and energy-saving modes Versatility: Applications range from welding (also BrightLine for virtually spatter-free results) to cutting, hardening, casting processing, additive manufacturing, laser wire arc welding, etc.   Suitable applications: Ideal for industrial high-power laser applications: Application Features Manufacturing of automotive structural components Deep welding with high reproducibility Copper welding Particularly suitable with green wavelength (> 95 % spatter reduction) Remote hybrid welding Fast processing of large areas with a robust beam Additive manufacturing & hardening Suitable due to beam quality & compact design   Key technical data Property Laser power Up to 6,600 watts (6.6 kW), continuous Beam quality < 2 mm·mrad Wavelength 1030 nm (infrared) Number of outputs (4C) Up to 4 parallel usable fiber outputs Fiber connection diameter 100–600 µm (depending on configuration) Beam guidance Fiber-based, passive (no beam steering mirrors required) Cooling Water/air-cooled, internal or external chiller Dimensions Approx. 1000 × 800 × 2100 mm (W×D×H, depending on the version) Weight ~800–1200 kg (without cooling) Power supply 380 V - 10 % ... 460 V +10 %, 3AC + PE 38 kW / 41kVA 59 A / 400 V 50... 60 Hz Control TruControl 1000/3000, OPC-UA interface Safety standards Laser protection class 4 according to EN 60825-1   Weight: approx. 1200 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: good (used), functionality: fully functional, mileage: 21,865 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,400 kg, empty load weight: 1,560 kg, maximum load weight: 840 kg, first registration: 03/2025, next inspection (TÜV): 07/2028, loading space length: 1,800 mm, loading space width: 1,300 mm, loading space height: 1,100 mm, emission class: euro6e, color: white, number of seats: 3, number of previous owners: 1, machine/vehicle number: EULW2488, Equipment: ABS, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, seat heater, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, Special equipment: Infotainment system "AIO" with a 10" touchscreen, DAB, Bluetooth interface, Magic Cargo seat package Additional equipment: Airbag for driver/front passenger, rear parking assistance, rear hinged doors without glazing, body/superstructure: van, load compartment partition, model revision, engine 1.5 L - 96 kW diesel, wheelbase 2975 mm, tire repair kit, tire pressure monitoring system, low emissions according to emission standard Euro 6e, Eco-LED headlights, sliding door on the right, black side protection strips, service system: Connect Box (microphone, speakers, SOS button, SIM card), front left seat adjustment (4-way), front right seat adjustment (4-way), start/stop system, lashing eyes in the cargo/load compartment, auxiliary heater. Hfodj Ai Shhopfx Accep Load compartment length: 180 cm Load compartment width: 130 cm Load compartment height: 110 cm Distance between wheel arches: 114 cm

Condition: good (used), functionality: fully functional, mileage: 21,865 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,400 kg, empty load weight: 1,560 kg, maximum load weight: 840 kg, first registration: 03/2025, next inspection (TÜV): 07/2028, loading space length: 1,800 mm, loading space width: 1,300 mm, loading space height: 1,100 mm, emission class: euro6e, color: white, number of seats: 3, number of previous owners: 1, machine/vehicle number: EULW2488, Equipment: ABS, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, seat heater, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, Special equipment: Infotainment system "AIO" with a 10" touchscreen, DAB, Bluetooth interface, Magic Cargo seat package Additional equipment: Airbag for driver/front passenger, rear parking assistance, rear hinged doors without glazing, body/superstructure: van, load compartment partition, model revision, engine 1.5 L - 96 kW diesel, wheelbase 2975 mm, tire repair kit, tire pressure monitoring system, low emissions according to emission standard Euro 6e, Eco-LED headlights, sliding door on the right, black side protection strips, service system: Connect Box (microphone, speakers, SOS button, SIM card), front left seat adjustment (4-way), front right seat adjustment (4-way), start/stop system, lashing eyes in the cargo/load compartment, auxiliary heater. Load compartment length: 180 cm Load compartment width: 130 cm Hfedpfx Ae Ai Simsccsp Load compartment height: 110 cm Distance between wheel arches: 114 cm

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, controller model: FSCUT 4000E, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber 6001 G, laser hours: 1 h, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, type of cooling: water, overall weight: 8,000 kg, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, The JFY BFC+ is a new fiber laser cutting machine featuring a high-quality TRUMPF laser source. It enables fast, precise, and efficient cutting of various materials. The machine combines a robust design with high beam quality, stable processes, and reliable performance in daily production. It is particularly suitable for companies in the sheet metal processing, steel, and mechanical engineering industries, as well as for the production of housings, industrial components, and ventilation elements. Key advantages of the machine: * Laser source power: various * TRUMPF laser source * Fiber laser technology * High cutting speed * Stable cut edge quality * Precise cutting head with autofocus * Robust machine design * Intuitive operation * Fast production preparation * Cutting of various materials possible * High repeatability accuracy of parts * Excellent price-performance ratio * Technical support and service in Poland Hfedsz Eq H Hspfx Accop Application areas: * Cutting of mild steel * Cutting of stainless steel * Cutting of aluminum * Cutting of structural elements * Manufacturing of housings and machine elements * Production of ventilation elements * Series and single-item production * Job-order cutting !!!Individual configuration of the machine is possible according to customer requirements, including table size, loading and unloading system, and additional equipment!!! We are happy to provide you with detailed offers, technical specifications, and delivery terms at any time.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, throat depth: 450 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, oil tank capacity: 200 l, overall weight: 8,350 kg, total length: 3,980 mm, total width: 1,820 mm, total height: 2,880 mm, input current: 380 A, pressing force: 100 t, clearance between the columns: 2,700 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine’s pressing force ranges from 60 to 320 tons. The TPM8 is designed for maximum productivity and ease of operation. Its robust and rigid frame construction, combined with automatic job preparation, ensures that you achieve precise results quickly. In addition, customizable tooling kits enable a fast start-up, ensuring that you get the best value for your investment. Hsdpfx Ajz Eq Nzsccsfp * Best price-performance ratio * Easy operation * JFY BEND – Offline programming * Maximum safety * Application and local service * Bending tools 2D graphic programming 3D graphic programming 3D bending simulation !!! Individual machine configuration is possible according to customer requirements, as well as additional equipment !!! We are always available to provide detailed quotes, technical specifications, and delivery conditions.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Excellent technical condition. Not much used machine. Serviced by Elumatec Austria. Hfodpfjwrpwijx Accjp

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,556 h, load capacity: 4,000 kg, lifting height: 4,350 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, battery capacity: 930 Ah, battery voltage: 80 V, DGUV certified until: 11/2027, fork length: 1,200 mm, tire condition: 90 %, total height: 2,350 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following technical specifications: Lifting capacity: 4,000 kg Lifting height: 4,350 mm Overall height: 2,350 mm Year of manufacture: 2019 Operating hours: 4,556 Still 4.0-ton electric forklift with full cabin and heating, air-sprung fabric seat, very good battery, very good front tires, new rear tires, triplex mast with full free lift, side shifter, 4th valve, pre-installation for road traffic regulations, one-pedal operation, joystick 4+, charger. Additional attachments such as fork positioners, fork adjusting device, rotating device, etc. available upon request. Price ex works, including 1,000 hours of service according to Still manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive available upon request by telephone appointment. Sale is exclusively to commercial enterprises; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-type low-loader (transport costs upon request). Hjdpfx Ao Akkgdeccjfp Further information about us and additional offers can be found on our newly designed website!

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), Year of construction: 2025, Impact Crusher: Structure, Operation, and Technical Specifications An impact crusher is a high-efficiency crushing machine widely used in mining, cement, construction, and recycling industries. It is designed to crush materials by utilizing the energy of impact rather than pressure, making it ideal for medium-hard and soft materials such as limestone, gypsum, coal, and concrete aggregates. Its ability to produce uniform, cubic-shaped particles makes it a preferred choice for aggregate production and fine crushing applications. Working Principle The impact crusher operates on a simple yet powerful principle: material is fed into the crushing chamber and struck by high-speed rotating blow bars mounted on a rotor. The kinetic energy from the rotor transfers to the material, causing it to break upon collision with the impact plates (also known as breaker plates). The crushed material rebounds within the chamber for secondary impacts until it reaches the desired size and exits through the discharge opening. The process involves: Primary Impact: Material is hit by blow bars and thrown against the impact plates. Secondary Impact: Rebounded fragments collide again with the rotor or other particles, achieving finer crushing and better shape. Structural Composition An impact crusher consists of several key components that ensure efficient operation and durability: Rotor Assembly: The core component, equipped with blow bars that deliver high-speed impact energy. Impact Plates (Aprons): Adjustable plates that control the crushing gap and final product size. Feed Inlet and Discharge Outlet: Designed for smooth material flow and uniform discharge. Frame and Housing: Heavy-duty welded structure providing stability and vibration resistance. Adjusting Device: Hydraulic or mechanical system for controlling the gap between rotor and impact plates. Safety Mechanism: Hydraulic opening system for easy maintenance and overload protection. Technical Highlights Feed size: ≤500 mm Discharge size: 0–60 mm (adjustable) Capacity: 30–800 t/h Motor power: 45–560 kW Rotor speed: 500–1500 rpm Performance Features: High Crushing Efficiency: The high-speed rotor and optimized chamber design ensure strong impact force and high reduction ratio. Excellent Particle Shape: Produces cubic, uniform aggregates suitable for concrete and asphalt production. Adjustable Output Size: Hydraulic or mechanical adjustment allows precise control of product size. Easy Maintenance: Replaceable blow bars and liners with quick access doors simplify servicing. Versatile Applications: Suitable for primary, secondary, and tertiary crushing in various industries. Types of Impact Crushers Hfodpfxov E Ddle Accop Horizontal Shaft Impact (HSI) Crusher: Uses a horizontal rotor to deliver impact energy. Ideal for soft to medium-hard materials and widely used in aggregate and recycling applications. Conclusion The impact crusher combines high-speed impact energy with a robust structural design to deliver efficient, reliable, and versatile crushing performance. Its ability to produce well-shaped aggregates, adjustable output sizes, and low maintenance requirements make it indispensable in modern crushing systems. Whether in mining, construction, or recycling, the impact crusher remains a key machine for achieving high productivity and superior material quality.

Condition: used, empty load weight: 7,592 kg, maximum load weight: 31,408 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, color: other, Year of construction: 2021, gearing type: mechanical, EU-vehicle, Tare weight: 7592kg, GVW: 39000kg, Loading area (L W H): 13,620 mm x 2,480 mm x 2,750 mmTyre size: 385/65 R22.5, Loading area volume: 92 m³, 1st axle: , 2nd axle: , 3rd axle: , Pneumatic air suspension, Rear underrun, Lift axle, Electronic Brake System EBS, Spare wheel carrier double, Ferry lashings, Barn doors, Double deck, 1x15 and 2x7 pin plug, Customs seal, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Hfodj Ahz Azjpfx Accjp

Condition: excellent (used), Year of construction: 2008, TECHNICAL SPECIFICATIONS • Brand: Daikin (McQuay) | Model: ALS393.4 • Product type: Air-cooled chiller • Year of construction: 2008 • Condition: Used • Cooling capacity: 1,400 kW | approx. 1,204,000 kcal/h • Evaporator: Shell & tube • Condenser: Aluminium fins | copper tubes • Condenser fans: 20 • Refrigerant: R-134a • Compressor: McQuay HSA220 • Controller: Carel • Dimensions: 10100 x 2230 x 2500 mm Hfodpfx Asilcqaeccop • Empty weight: 10,348 kg • Water flow: not verified • Power supply: not verified DESCRIPTION Offered with the assurance of Özsayın Soğutma, active in industrial refrigeration since 1982. The unit offered is a Daikin (McQuay) ALS393.4 air-cooled screw chiller with 1,400 kW cooling capacity. McQuay is a Daikin brand. Suitable for process and comfort cooling. DEVICE CONDITION • Condition: Used • Ready for sale • Condition details and available documents are shared at the quotation stage TECHNICAL ADVANTAGES • 1,400 kW cooling capacity • Air-cooled design: no cooling tower required • R-134a refrigerant • Carel controller APPLICATION AREAS • Industrial process cooling • Plastic injection and extrusion lines • Food processing and cold storage • Chemical and process plants • Office and commercial buildings (comfort cooling) OZSAYIN DIFFERENCE At Özsayın Soğutma we offer complete solutions, not only equipment sales: • Chiller sales and rental • Overhaul and remanufacturing services • Compressor maintenance and overhaul • On-site service and technical support • Spare parts supply • Project and engineering support SALES & TRUST • Ready for sale • Technical details are shared at the quotation stage • Commissioning support available DELIVERY & PROCESS • Shipment across Türkiye • Export and customs process support • Delivery time and scope stated in the quotation

Condition: excellent (used), Year of construction: 2021, operating hours: 1,400 h, TECHNICAL SPECIFICATIONS • Manufacturer: i-Tech (as listed) | Product code: MCC 700 • Product type: Air-cooled chiller • Year of construction: 2021 • Condition: Used • Application: Comfort and process cooling • Cooling capacity: 700 kW | 602,000 kcal/h • Water flow rate: 120.40 m³/h • Sound power level (Lw): 105 dB(A) • Water connection: 6" | Ø150 mm • Compressor: Bitzer CSH7583-100 | 2 pcs | screw • Refrigerant: R407C • Evaporator: Shell & tube • Condenser: Microchannel • Power supply: 400 V AC | 3 phase | 50 Hz • Maximum current: 330 A • Control panel: Eliwell • Dimensions (L x W x H): 6,530 x 2,200 x 2,550 mm • Weight: 4,211 kg DESCRIPTION Offered with the assurance of Özsayın Soğutma, active in industrial refrigeration since 1982. The unit offered is an MCC 700 air-cooled screw chiller with 700 kW cooling capacity, listed under manufacturer i-Tech. Suitable for process and comfort cooling. DEVICE CONDITION • Condition: Used • Ready for sale • Condition details and available documents are shared at the quotation stage TECHNICAL ADVANTAGES • 700 kW cooling capacity • 2 x Bitzer CSH7583-100 screw compressors • R407C refrigerant • Microchannel condenser | air-cooled: no cooling tower required • Eliwell control panel APPLICATION AREAS • Industrial process cooling • Plastic injection and extrusion lines • Food processing and cold storage • Chemical and process plants • Office and commercial buildings (comfort cooling) OZSAYIN DIFFERENCE At Özsayın Soğutma we offer complete solutions, not only equipment sales: • Chiller sales and rental • Overhaul and remanufacturing services • Compressor maintenance and overhaul • On-site service and technical support • Spare parts supply • Project and engineering support SALES & TRUST Hfsdpfeikz Hxsx Accop • Ready for sale • Technical details are shared at the quotation stage • Commissioning support available DELIVERY & PROCESS • Shipment across Türkiye • Export and customs process support • Delivery time and scope stated in the quotation

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls Hfjdeyzylvepfx Accop 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: used, maximum load weight: 32,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, loading space length: 7,600 mm, loading space width: 2,190 mm, loading space height: 1,500 mm, loading space volume: 25 m³, total length: 8,700 mm, total width: 2,550 mm, total height: 3,560 mm, Year of construction: 2026, Equipment: ABS, 3-axle tipping semi-trailer, MEILLER HardoX steel, 25 cbm, complete thermal insulation First registration 05/2026 Dimensions (L x W x H) 7,600 x 2,190 x 1,500 mm Unladen weight 6,580 kg Saddle height 1,220 to 1,270 mm Load volume 25 cbm MEILLER tipping cylinder, high-pressure version, 250 bar THERMO insulation: floor, sides, front, and rear Preparation for temperature measurement system Tipping body floor: HardoX steel HB 450, 5 mm Rear gate: HardoX steel HB 450, 4 mm Externally mounted, angled, pivoting rear gate Side walls: HB450 HardoX steel, 4 mm Electric sliding cover with wireless remote control; cover opens automatically when tipping process is initiated 2x LED reversing lights BPW axles, reinforced "Off-Road" version, with large disc brakes, 430 mm 1st axle: LIFT AXLE WABCO trailer EBS with RSS stability program WABCO Smartboard with axle load display Tire size: 6x 385/65 R 22.5 Retarder (can be deactivated) Automatic tipping and lowering Hodo Aimk Repfx Accsfp RENTING IS THE NEW BUYING; available from us with full-service rental.