Used Shears for sale (1,567)

Year of construction: 1975, condition: ready for operation (used), Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible. Redpfx Abexc Nikspocf

Condition: ready for operation (used), A hydraulic AMADA NC guillotine shear is offered. Cutting length: approx. 3050mm, max. sheet thickness: approx. 6mm, min./max. cutting angle: approx. 0.4°/2.2°, backgauge travel: approx. 1000mm, backgauge traverse speed: 100mm/s, max. stroke: approx. 160mm, max. stroke rate: 45strokes/min, control: AMADA NC control. Including sheet handling system. Machine dimensions X/Y/Z: approx. 3800mm/2250mm/2100mm, weight: approx. 6500kg. Inspection by appointment possible. Rcodpfozlt Susx Abpof

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Rsdpfxsy U Nqbo Abpjcf

Year of construction: 2008, condition: ready for operation (used), A CNC punching and cutting system Finn-Power in need of repair, including an automation and stacking system STR 6, is available. Punching force: 300kN, cutting force: 250kN, max. operating pressure: 300bar, max. material thickness: 8mm, max. punching diameter: 89mm, turret stations: 20, axis speed: 150m/min, positioning speed: +/-0.1mm, repeat accuracy: +/-0.05mm, machine weight: approx. 28000kg, operating hours: approx. 40342h. The thread-cutting unit is non-functional. Documentation available. An on-site inspection is possible. Rcedjzcp T Repfx Abpjf

Year of construction: 1990, condition: ready for operation (used), A guillotine shear is offered. Cutting length: 3000mm, cutting capacity steel: 2mm - 6mm, cutting capacity stainless steel: 3mm. Equipped with back gauge, front support tables, finger protection guard. Inspection possible by arrangement. Rsdpjy Tat Dofx Abpocf

Year of construction: 1989, condition: ready for operation (used), Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment. Rcjdpfx Aozukrqsbpef

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Rcsdpfxozt Sxvo Abpsf Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: new, Year of construction: 2026, Hydraulic Guillotine Shears Hydraulic guillotine shears are advanced machines designed for precise cutting of sheet metal with various thicknesses and hardness levels. Thanks to the use of a hydraulic drive system, they provide high cutting force, enabling efficient processing of even the most demanding materials. The robust construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable equipment in industrial plants and workshops involved in metal processing. Technical Specifications Max. sheet thickness (S235): up to 8.0 mm Maximum cutting length: 3200 mm Cutting angle: 1.5° Number of strokes per minute: 10–15 Back gauge travel: 600 mm Motor power: 11 kW Length: 4300 mm Width: 2000 mm Height: 2100 mm Weight: 7800 kg Equipment Motorized rear back gauge (driven by ball screws) Hydraulic sheet metal clamps along the entire cutting length Blade gap adjustment Ball transfer guides on the worktable Working area illumination Rsdpfx Ajych Iaebpjcf Front support arms Mobile foot pedal controller Hydraulic Guillotine Shears NC 8x3200 ESTUN E21S Control System Control: Precise positioning of the rear back gauge Program memory: Ability to save up to 40 programs, each with a maximum of 25 steps Retract function: Automatic back gauge retraction after cutting Parameter saving: One-button saving of settings Data protection: Retention of parameters in case of power failure

Condition: used, functionality: fully functional, Year of construction: 2000, For sale: CIDAN HSM-F electric guillotine shear with an automatic back gauge. The machine was manufactured in Sweden and is in full working order and good technical condition. It has undergone a complete service, has been recently repainted, and is ready for operation. The machine is connected and can be inspected and tested at our warehouse. Technical specifications: Manufacturer: CIDAN Model: HSM-F Year of manufacture: 2000 Made in: Sweden Working length: 3050 mm Rcsdjzhk U Sopfx Abpsf Maximum cutting thickness: 2.5 mm Automatic back gauge: 750 mm Manual back gauge adjustment Sheet metal discharge system under the machine Adjustable extension of the front table for cutting longer sheets. Application: Ideal for sheet metal processing companies, sheet metal workers, ventilation manufacturers, roof and facade manufacturers, and other metalworking workshops where precise and reliable sheet metal cutting is required. If you have any further questions, we will be happy to answer them.

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Rcedszud Ekspfx Abpof

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Rcsdpoqzky Esfx Abpof Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials. Rcodpfx Abey Uquhjpsf

Year of construction: 1990, condition: ready for operation (used), Offered for sale is an Atlantic guillotine shear. Cutting length: 3000mm, max. cutting thickness: approx. 6mm. Documentation available. An on-site inspection is possible. Rcedpfxeztzrfj Abpsf

Condition: good (used), Year of construction: 1986, Max. working width: 4000 mm for sheets with tensile strength of 40 kg up to: 3 mm Table width: 470 mm Rcodpfx Abey A Eg Ujpsf Backgauge adjustment: 1000 mm Fixed cutting angle: 1°30' Frame throat depth: 200 mm Hydraulic drive: 380 V, 7.5 kW Required space: 4650 x 1830 x 1420 mm (height) Weight: 5.7 t

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Shearing tool: Knife plate punch die for profile steel, 6 pieces Sizes: see photos -Submission/Price: complete -Dimensions each: 188/188/H40 mm Rjdeznkxwopfx Abpjcf -Weight: 10 kg/pc.

Condition: good (used), punching/shearing machine GEKA Hydracrop 80/A Rcodpfx Ajzurz Hsbpjf Angle 130 x 130 x 13 mm Flat bar 450 x 15 mm Round bar 45 mm Square bar 45 mm Punch ø40 x 14mm Double-acting Equipped with an automatic side stop Weight approximately: 2500 kg

Condition: new, Year of construction: 2026, Guillotine-style sabre shears for cutting sheet metal, soft materials, linoleum and plastics. The solid construction and use of high-quality steel blades ensure precise cutting of various materials. The machine requires little physical effort during operation. Machine features The machine is designed for fast and precise cutting of various materials Indispensable shears for every workshop, hobbyist and DIY garage Rodpovzqlujfx Abpscf The machine can be fixed to the floor Lever handle equipped with a comfortable rubber grip Stable and robust machine construction Blade made of high-quality steel Base included as standard Technical data HS-1000 Cutting length 1000 mm Sheet thickness 1.5 mm Dimensions 1365 × 500 × 1700 mm Weight 70 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, Manual shears designed for cutting sheet metal, flat bars and steel rods. Made from steel plates, these shears are characterised by high reliability and simple operation. Manual shears designed for cutting sheet metal, flat bars and steel rods. The individual models differ in blade length. Universal sheet metal shears – an ideal solution for locksmith workshops and construction sites Favourable geometry allows cutting without excessive force Secure material clamping ensured by an adjustable hold-down clamp Machine body made of robust steel plates Special shape facilitates sheet movement Reliable contour cutting thanks to good knife visibility Rcjdpfsvzqmfex Abpjf Technical data Model HS-12 Blade length [mm] 304 Cutting capacity: sheet metal [mm] 6 Cutting capacity: flat bar [mm] 70 × 6 Cutting capacity: round bar [mm] 13 Weight [kg] 26 Dimensions (L × W × H) [mm] 740 × 160 × 440 Manufacturer: Cormak

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Manufacturer: Mubea, cutting plate shearing tool for square steel / round steel -Item No.: Square steel: 27x27 mm / 50x50 mm -Round steel: Ø 31/56 mm -Number: 2x shearing tools available -Price: per piece -Dimensions: 185/185/H40 mm Rcodpfx Aeznadvsbpef -Weight: 8.8 kg/pc.

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel Rcsdpjznngxjfx Abpjf - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 32231, control type: CNC control, sheet thickness (max.): 6 mm, LVD MVS 6/4050 Guillotine Shear / Sheet Metal Shear – Year of Manufacture 2008 For sale is a robust and reliable guillotine shear from the renowned manufacturer LVD. Technical Data: Manufacturer: LVD Company n.v. Model: MVS 6/4050 Year of Manufacture: 05/2008 Maximum Cutting/Pressing Force: 197 kN Max. Sheet Thickness / Capacity: approx. 6 mm (typical for the model, depending on material) Working Length: approx. 4050 mm Max. Force: 10,000 daN Connection: 400 V / 50 Hz Power: 10.1 kW Description: The machine is in good used condition and is fully functional. It is ideally suited for precise cutting operations in steel and metal construction as well as industrial sheet metal processing. Its solid construction ensures high cutting quality and long service life. Rsdpfx Aeywpkajbpjcf Features / Highlights: Industrial design High cutting accuracy Easy to maintain Proven LVD quality Fields of Application: Metal construction Sheet metal processing Workshops & production Viewing by appointment. The machine is currently inbound from England. Export, import, and transport can be arranged by us for an additional fee.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 38461, Offer 26186 Technical data: - max. working width 1275 mm - max. material thickness (at 40 kg tensile strength) 3 mm - front angle stop - front material supports approx. 300 mm - rear stop, manually adjustable 5 - 650 mm - stroke rate approx. 32 /min - cutting angle 1.9 ° - preselection for single stroke / continuous stroke - drive 400 V / 3.0 kW - E – foot switch - protective guard on the rear of the machine - space required, including rear stop, without front support arms Rcsdpoztvn Uefx Abpof - approx. W 1500 x H 1150 x D 1450 mm - weight approx. 1200 kg

Condition: good (used), Year of construction: 1996, sheet width 3050 mm plate thickness 6.5 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW Rodpszndq Tjfx Abpecf weight of the machine ca. 5000 kg range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear - HACO NC control, Model SC 5, front left * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws - Hydraulic sheet metal hold-down devices - Front finger guard - 1x long side stop - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: good (used), Brand: HM Model: WKS 1000/4.0 Cutting length: 1000 mm Cutting capacity (steel): 4 mm Cutting capacity (stainless steel): 2 mm Redpfxsw Hydve Abpjcf Back gauge: 750 mm CNC controlled Hold-downs: 1 piece Table height: 780 mm

Condition: good (used), Year of construction: 1993, Manual lever shear, manufactured by Schartmanns, model WST 1, 1.5 mm, year of manufacture 1993, with side stop. Rcsdpfx Aozmmvpsbpjf