Used Veneer Shears for sale (2,058)

Condition: used, Stack paper cutting machine, guillotine cutter, flatbed cutter SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Rubber, paper and veneer shear Machine no. 60178 Year of manufacture 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Feed height: 140 mm Back gauge: max. 1550 mm Knife drive motor power: 5.5 kW Power supply: 380 Volt, 50 Hz Laodpfx Aasdzqnysnjk - Two-hand operation for blade stroke release - Automatic pressing by pressure clamp holds the paper stack on the table - Manual clamp and stroke release via foot pedal (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electrical control unit (not operational), no wiring diagrams, no user manual - Back gauge adjustment via servo motor (motor, controller, and control unit present, not operational) Required space (L x W x H): 325 x 270 x 165 cm Space required for transport without disassembly: length 330 cm x width 270 cm x height 175 cm Space required for transport with disassembly: length 550 cm x width 220 cm x height 175 cm (machine + separate table) Machine: length 270 cm x width 190 cm x height 175 cm Side table: length 240 cm x width 170 cm x height 120 cm Weight of assembled machine: approx. 5000 kg (excluding the transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sale price does not include the 20 mm steel plate the machine is stored on. (Price for the steel plate: 900 EUR net)

Condition: good (used), cutting length (max.): 3,600 mm, overall weight: 4,000 kg, Cutting length (max.) 3600 mm Lodpfx Aajwv Eiisnsak

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm Lsdpfxoxgbwzj Aansak FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: excellent (used), Year of construction: 1997, still a very nice veneer guillotine from the renowned manufacturer Langzauner max. cutting length: 3100 mm with programmable width stop Lodjxvlluopfx Aanoak with CE marking

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 241 143, cutting length (max.): 3,600 mm, Veneer shears with one blade; length: 3.60 m Ljdpswql N Sefx Aanoak

Condition: used, functionality: fully functional, cutting length (max.): 1,000 mm, This manual veneer shear is in very good condition and fully functional. It is currently located in Plankstadt near Heidelberg, but will be relocated to Bisperode near Hameln on 19.07.25, unless sold earlier. Laodpfewylhgox Aanjk

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Lodewmxmvjpfx Aanoak Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: good (used), Year of construction: 1994, functionality: fully functional, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, overall weight: 2,300 kg, Veneer shears with a maximum cutting length of 3100 mm Lodpfx Aev Nzpmoansak Maximum thickness 45 mm Built in 1994 With spare blade

Condition: ready for operation (used), Year of construction: 2014, Additional Equipment Feeding device for efficient and comfortable semi-automatic feeding of veneer strips. Lasdpfx Aox Nkm Tsanjk Panel automatic for component-matched faces with pre-sorted components and pre-selected number of veneer strips. This FISCHER & RüCKLE FZR15 / DAR 12 was manufactured in 2014. It's a used veneering machine designed for efficient crossfeed glue splicing of veneer strips. Features include a feeding device for semi-automatic feeding, a panel automatic for component-matched faces, and a direct stacking device for gentle discharging. Ideal for applications requiring precise veneer splicing. Contact us for more information about this machine. Application Types Veneering

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Very good condition. Lajdpfx Aex Ncxhoanok Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. High knives, in very good condition. Weighs over 400 kg

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Lajdpfx Aouvdzuoanjk

Year of construction: 2013, condition: ready for operation (used), - USED - CNC HYDRAULIC SHEAR WITH DRIVEN BACK GAUGE CUTTING LENGTH: 3100 mm MAX CUTTING THICKNESS: 6 mm THROAT DEPTH: 500 mm BACK GAUGE TRAVEL: 1000 mm MOTOR POWER: 15 kW CONTROL UNIT: DURMA D-TOUCH7 No OF PLATE HOLDERS: 16 Lodjtqgd Tspfx Aanjak WEIGHT: 7830 Kg OVERALL DIMENSIONS: 4200 x 2200 x 2100 mm NOTE: WITH PNEUMATIC REAR SHEET SUPPORT

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Lajdpfxog Nn E No Aansk • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2025, overall weight: 990 kg, opening width: 788 mm, total width: 920 mm, total length: 2,072 mm, cutting force: 40 t, pressure: 220 bar, operating pressure: 220 bar, warranty duration: 12 months, Hydraulic car body removal shears Weight: 990 kg - Total length: 2072 mm Laodpfox Hwblox Aanek - Width: 920 mm - Rotation: 360 degrees - Cutting power: 40 tons - Oil flow: 50-70 l/min - Oil pressure: 220 bar - Excavator weight: 18-24 tons

Condition: ready for operation (used), Year of construction: 2009, Additional Equipment Feeding device for efficient and comfortable semi-automatic feeding of veneer strips. Panel automatic for component-matched faces with pre-sorted components and preselected number of veneer strips. This FISCHER & RÜCKLE FZR15 / DAR 22 was manufactured in 2009. A used veneering machine, it excels in efficient crossfeed glue splicing of veneer strips. It features a semi-automatic feeding device, a panel automatic for component-matched faces, and a direct stacking device DAR-22 for gentle discharging and stacking. Ideal for high durability and ease of operation. Contact us for more information about this machine. Application Types Veneering Laedpex Nkndsfx Aanek

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Laedpfsvvkazex Aanjk Storage location: Nattheim

Year of construction: 1999, condition: ready for operation (used), - USED - MECHANIC GUILLOTTINE SHEAR WITH DRIVEN BACK GAUGE CUTTING LENGTH: 3050 mm MAX CUTTING THICKNESS: 4 mm THROAT DEPTH: 500 mm No OF PLATE HOLDERS: 17 WEIGHT: 7200 Kg Ljdpemyc I Tjfx Aanjak ACCESSORIES: DIGITAL READOUT SYSTEM

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: Lasdpfxewd N Rmo Aanok • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: ready for operation (used), Year of construction: 2015, Additional Equipment Feeding Device: Efficient and comfortable semi-automatic feeding of veneer strips Panel Automatic: For component-matched faces with pre-sorted components and pre-selected number of veneer strips This Fischer & Rückle FZR 21 was manufactured in 2015. A used veneer crossfeed splicing machine, it efficiently splices parallel jointed veneer strips into endless or component-matched veneer faces. It handles veneer strip lengths from 350 to 2150 mm and widths up to 600 mm, with a thickness range of 0.3 to 1.5 mm. Features include a semi-automatic feeding device and a horizontal pressing system for tight glue joints. For more information about this machine, please reach out to us. Application Types Lodpfox Nknkjx Aansak Veneering

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Lajdpfxsvvi Ude Aanok

Condition: excellent (used), Hot Platen Press with Medium Heating Platens Laedsvzq Rkjpfx Aanok Pressing area 2750 x 1300 mm Number of press cylinders #6 Total pressing force 100 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load approx. 3.0 kW Space requirement (L x W x H) approx.: 3300 x 1450 x 1950 mm Weight: approx. 3700 kg Hydraulic Hot Platen Press Down-piston design Medium heating plates - for connection to the central hot water supply Pressure continuously adjustable via pressure switch Central control panel Analog temperature display for heating plates Safety ripcord Rack compensation Main switch Automatic opening Stroke limiter CE NEW AL cover plates

Condition: ready for operation (used), Year of construction: 2017, Additional Equipment Hydraulic unit with pump, oil tank, and valves for operating the pressure and auxiliary cylinders Hydraulic control unit located at the upper part of the press for maintenance ease Control panel with buttons, selector switches, and a pressure control gauge This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information. Application Types Lodpfx Aaox Nkm Hsnoak Pressing / Laminating

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Storage location: Nattheim Laodpfjvvkblox Aanok

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Laedev D I Uxopfx Aanjk Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Year of construction: 2003, Veneer Composing Machine Electric motor, separate for chains and glue application Glue is applied to the edge of the newly inserted veneer strip, which increases the strength of the glue joint. Robust, durable stainless steel conveyor chain with flexure joints Separate controls for temperature, speed, and pressure Quick and easily accessible glue tank for fast and convenient refilling or cleaning Multiple heating zones for individual temperature adjustment Extended glue tank lifetime due to integrated cooling unit Continuously adjustable feed speed INCLUDES GLUE COOLER Technical Data: Throat depth: 1200 mm Veneer strip width: 45–1200 mm Veneer strip length: 300–3200 mm Veneer strip thickness: 0.4 – 3.0 mm Veneer moisture content: max. 8–12 % Working height: 900 mm Ledpoxgg Hhsfx Aansak Feed speed: 5–50 m/min Heating zone length: 1000 mm Max. heating temperature: 250 °C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg SPARE PARTS VALUED AT EUR 3,500 HAVE BEEN INSTALLED