Used Sheet Cleaning Machines for sale (68,615)

Condition: excellent (used), functionality: fully functional, Timesavers Series 22-1050-WMDMD The Series 22-1050-WMDMD, with a working width of 1050 mm and a table opening of 0.8-100 mm, is ideally suited for processing laser-cut, stamped, water jet-cut, or plasma-cut parts, thanks to its 3 stations. The belt grinding station allows for the removal of burrs and protruding edges. Subsequently, the edge burrs are removed and the edges are slightly rounded using the disc brushes. To achieve a uniform result, we have incorporated two oscillating brush stations in which the disc brushes rotate alternately to the left and right. Thanks to the quick-change system for belts and brushes, the machine can be reconfigured in just a few steps. Bwodeznlxropfx Afgew The conveyor belt, as well as all other stations, are frequency-controlled, allowing for stepless speed adjustment.

Condition: used, B 60 W BP DOSE (ROLLER) Ride-on Scrubber-Suction Machine The B 60 W Bp Dose ride-on scrubber-suction machine is equipped with a drive system, a maintenance-free 120 Ah battery (2 units), and a user-friendly key system. This system enables simple and safe operation by regulating access and operating rights to protect against incorrect use. The machine is ideally suited for cleaning textured floors and can cover areas of up to 2,500 square meters. The brushes can be quickly and easily installed and replaced. Thanks to the eco!efficiency mode, the battery life is significantly extended, and the integrated tank flushing system makes it easier to clean the dirty water tank after floor cleaning. - Ride-on scrubber-suction machine (60 l) with drive system. - Ideal for 1000 - 2500 m². - Energy-saving eco!efficiency mode. Proven dual-disc technology ■ Brush heads can be quickly installed and replaced. Powerful drive system ■ Comfortable driving with stepless speed adjustment (forward and reverse). ■ Pre-settable maximum speed. ■ Operation via drive levers directly on the handle. With Dose detergent dosing system. ■ With on-board detergent dosing. ■ Precise and even dosing (adjustable up to 3%). ■ No contamination of the tank, as it is only filled with fresh water. Technical data Power supply V / Hz 100 – 240 / 50 – 60 Working width, suction mm 850 Tank, fresh/dirty water l 60 / 60 Brush speed rpm 600 – 1300 Brush pressure kg 37 Battery Ah 120 Battery type maintenance-free Battery charging time h 4.7 Sound pressure level dB(A) 71 Water consumption l/min 3.6 Drive type battery Drive drive motor Mains connection, charger V / Hz 100 – 240 / 50 – 60 Dimensions (L × W × H) mm 1520 × 748 × 1160 Item condition: used, the pictures may differ, as the item is available in multiple units. Quantity: 1x Kärcher ride-on scrubber-suction machine B 60 W Bp Dose General signs of wear include all damage that can be expected due to age and operating hours. You can find more cleaning machines - new and used - in our shop! International shipping costs on request! Bwjdpfex Hvvzjx Afgjw

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 601 PVC Köşe temizleme makinesi ( 3 Bıçak), - Complies with CE standards. - Cleaning the corners of PVC profiles after welding Bedpfjrbid Ijx Afgjww - Cleaning the upper and lower surfaces of the corners - Possibility to separate surface and corner cleaning for acrylic profiles - Fully automatic operation with PLC - 3 different blade attachment possibilities - Automatic case wing profile separation feature - Ability to automatically center and square the profile

Year of construction: 2019, condition: excellent (used), 2-tank metalparts-cleaning machine Bwjdpfxjzndnlo Afgsw usable length: 800 mm usable width: 600 mm usable hight: 400 mm loading capacity: 150 Kg. volume of washing-tank: 1.100 Ltr. volume of flush-tank: 1.100 Ltr.

Condition: good (used), Year of construction: 2019, operating hours: 5,800 h, Timesavers 42 Series WRBW (Belt Sander / Rotary Brushes / Belt Sander) Model: A Rrez A Ucmonjlp Year of Manufacture: 2019 Only 5,800 operating hours! Includes an ATEX exhaust system from Ulmatec, including an H14 filter. Completely overhauled. Bwodpfe Ahwtcsx Afgjw

Condition: used, Year of construction: 2008, working width: 800 mm, Grinding machines TimeSavers are designed for surface processing of parts up to 800 mm wide. Product fixation - vacuum. The machine is equipped with 2 stations: abrasive belt / brush. The equipment is suitable for grinding, edge rounding, oxidation and slag removal, final grinding. Bjdpfovyhttjx Afgoww Technical specification: Model: Timesavers 41 series 900 WRD Year: 2008 Max. part width: 900 mm Max. part height: 80 mm Min. part height: 15 mm Speed: 1 - 10 m / min (adjustable) CNC controller: adjustable speed, part dimensions, grinding pressure and more. Other: heater, can work in cold conditions If you have more questions, we will be happy to answer.

Condition: used, RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and finishing line The system consists of three high-quality industrial components: Bedpfszklb Ejx Afgeww 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpieces up to a maximum length of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” More new and used items can be found in our shop! International shipping costs upon request!

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 110 kg, tank capacity: 10 l, machine/vehicle number: CARBON-973, Equipment: CE marking, It performs in-engine carbon and soot cleaning using hydrogen technology in all gasoline, diesel, LPG, and hybrid engine vehicles. It has a hydrogen gas production capacity of 1,500 liters per hour, and the gas duration can be adjusted as needed. Bsdsz D Sw Dspfx Afgeww It can clean engines up to 3,500 cc in diesel vehicles and up to 6,000 cc in gasoline vehicles. It operates with a 220V / 230V – 10 Ampere electrical infrastructure. It provides effective cleaning of air intake pipes, throttle body, injector nozzles, piston oil rings, intake and exhaust valves with their lower surfaces, piston surface, and the upper surfaces of intake valves. It helps to clean carbon and soot buildup in critical engine components such as MAF and MAP sensors, cylinder head air passages, EGR valve, turbocharger, and manifold. Without requiring disassembly and reassembly, it cleans in-engine soot and carbon deposits with high efficiency in a maximum of 1.5 hours. After an approximately 45-minute process, it supports engine performance and helps to achieve up to a 10% improvement in lost horsepower. It contributes to the optimization of fuel consumption, supporting the achievement of performance close to factory specifications. It offers an economical and efficient solution with a high price-performance advantage. It contributes to bringing exhaust emission values closer to ideal operating levels. It supports the engine running quieter, smoother, and with less knocking. It helps to reduce potential engine failures and maintenance costs caused by carbon buildup.

Condition: new, diameter 150 mm Workpiece thickness max. 100 mm work height max. 960 mm Bwjdpfx Afo Ahki Degew

Year of construction: 2005, condition: used, Chamber spray cleaning system Bjdpfx Aoz E I Syofgsww Basket usable dimensions, loading basket: L x W x H 842 x 659 x 512 mm Maximum loading weight: 100 kg; loading unit in front of the system included 2-tank design: Cleaning (1,200 liters) Rinsing (1,200 liters) System with electric heating - Cleaning process: Spraying - Basket remains stationary, swings, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) - Vacuum drying - Full filtration of the cleaning solution (Tank 1), 2x bag filters, filter fineness freely selectable - Automatic water refill for each tank - Coalescence oil separator External dimensions: 4,300 x 4,360 x 4,020 mm System weight: 5 tons Connection power: 110 kVA Fuse: 250A Control: Siemens S7 The system is fully functional, but with the limitation that operation via the panel is only partially functional. This is a consignment sale; the system must be dismantled and collected on-site by the buyer.

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Bedpfswb E S Isx Afgoww

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Bodpozwt Rbofx Afgsww

Condition: used, Cleaning washing defatting machine PERO type ROBOMAT 7A Useful length: 1600 mm Bjdpfez Nydkex Afgjww Useful width: 1040 mm Useful height: 960 mm Loading height: 800 mm Maxi load weight: 1500 kg

Condition: used, see website text Year of manufacture 2026 or Year of manufacture 2025 New floor scrubber, DAEWOO type DAFR70 Electric, battery-powered ride-on floor scrubber Serial no. 25DW07004ALE01 Year of manufacture 2026 Theoretical cleaning capacity approx. 3500 m²/h Working width 560 mm Cleaning brush / scrubbing brush Ø 560 mm Brush speed 200 rpm Suction nozzle width: 800 mm Fresh water tank volume: 70 liters Dirty water tank volume: 70 liters Travel speed 0-5.5 km/h Working time per battery charge approx. 3.5 hours Noise level 65 dBa Climbing ability max. 10% Bwsdjz Ek R Ejpfx Afgow Battery voltage 24 volts Mains connection to the charger 230 volts, 50 Hz, with Schuko plug - Battery charger 24 volts, permanently installed in the cleaning machine - 2x drive battery 12 volts, 100 AH = 24 volts, 100 AH - one cleaning brush Ø 560 mm - two separate tanks for fresh and dirty water - electric motor-driven drive on the front wheel - very maneuverable due to 3-wheel chassis Machine length: 1265 mm Machine width: 600 mm Machine height: 1150 mm Machine unladen weight approx. 200 kg Transport dimensions L x W x H 135 x 98 x 140 cm Transport weight approx. 250 kg New machine, from stock New - Original packaging - unused, from stock

Year of construction: 2015, condition: good (used), machine/vehicle number: 31650, Used cleaning machine Make: MTM Type: RoJet Bwsdpfx Afov Htn Asgsw Year of manufacture: 2015

Year of construction: 2016, condition: ready for operation (used), A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible. Bwsdpfx Afsxd Awdjgow

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, - Laser slag cleaner for laser cutting machines - 1.1 kW motor - Video demonstrating working principle available Bwjdsx E Srcjpfx Afgjw

Condition: used, Year of construction: 2012, For sale: a four-roll CNC-controlled rolling machine, VBM 2000 / 130. The machine is used, has seen little operation, and is in very good condition. It is currently operational and can be inspected and tested on-site. The four-roll rolling machine from the Italian manufacturer PARMIGIANI is designed for precise sheet metal rolling and the production of cylindrical and conical parts. The four-roll construction ensures high accuracy, rapid workpiece positioning, and efficient operation. Technical specifications: Manufacturer: Parmigiani Model: VBM 2000/13 Year of manufacture: 2012 Made in: Italy Type: Four-roll rolling machine Control: CNC Working length: 2050 mm Maximum pre-bending thickness: 3 mm Maximum rolling thickness (for sheets with Kr=40kg/mm2): 4 mm Diameter of center rolls: 130 mm Bwedezd T N Depfx Afgsw Diameter of side rolls: 140 mm Overall length: 3300 mm Overall width: 900 mm Overall height: 1200 mm Table height: 950 mm Main motor power: 3 kW Motor power for raising the rolling roll: 1.1 kW Working speed: 5.5 m/min Pre-bending speed: 140 mm/min Supply voltage: 380 Volts Frequency: 50 Hz Weight: 1900 kg Hydraulic drive Industrial heavy-duty construction Suitable for forming cylindrical and conical products Application: Ideal for the production of metal structures, tanks, containers, pressure vessels, ventilation systems, and other metalworking products in the energy sector. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Corner notching machine URBAN SV530 4B with turning station and transport system. Bodpfozfvgujx Afgjww The direction of travel is from left to right. Fully equipped tool heads at the top and bottom for processing all door and window profiles.

Condition: reconditioned (used), Year of construction: 2001, Riehle cleaning machine. Year of manufacture: 2001 Bwsdpfsz Ia Ixox Afgsw Power: 17 kW Used and refurbished. Price on request.

Condition: used, Year of construction: 2016, Operating hours of the machine: 1271 h Maximum feed width: 600 mm Processable sheet thickness: 1-120 mm Working height, constant: 850 mm Voltage: 400 V (50 Hz) / 480 V (60 Hz) Rated current: 30 A Rated power: 17 kW Protection class: IP 42 Feed rate, continuously adjustable: 1-4 m/min Depth: 1930 mm Width: 1600 mm Height: 1550 mm Machine weight, approx.: 2200 kg With the Pluto, you are opting for a compact machine for deburring parts cut with oxy-fuel and plasma processes. Features: - Tolerance and distortion compensation up to 6 mm Bwedezg U Slspfx Afgjw - Durable steel wire brushes for edge finishing - Magnetic clamping system across the entire working width - Heat-resistant conveyor belt made of chrome leather - Incl. extraction system

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, The Wattsan 100W is a brand-new portable laser metal cleaning machine. This model has 1 mirror and 1 seam type. Due to its air cooling system, the machine is quite small in size. It’s quiet, fast and easy to use. It is ideal for removing rust, paint, petrochemicals, oxide layers, welding scales, carbon deposits, etc. from metal items. This portable machine can also clean adhesive and galvanised materials as well as plaster and stone products. Thanks to pulse cleaning, this machine can clean thick layers of rust, paint, petroleum products, oxide films, scale and carbon deposits from metals without heating or damaging it. You can give our managers a call for additional details! Wattsan Cleaning 100 W machine characteristics: Cooling: Air Laser power: 100 W Machine size: 750x600x680 mm Laser source: JPT Weight: 46 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Bwsdpfer Hbwkex Afgsw Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm Bsdpoxz Ayyefx Afgoww - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 - Touch screen panel - Easy memorization process - Comfortable user-adjustable processing speeds Bwodpfx Aferbf R Togsw - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system

Condition: good (used), Year of construction: 2007, Workpiece height – max. 100 mm Workpiece width – max. 1300 mm Feed rate 0.4 – 2.6 m/min Number of spindles 6 pcs Bwjdpj Ahxp Hsfx Afgsw Spindle length 6 x 350 mm Total power consumption 7.5 kW Machine weight approx. 2.3 t Space requirement approx. 2.07 x 2.3 x 2.21 m Additional information Includes a circulating conveyor system for workpiece carriers and an extraction/filtration system.