Used Sheet Metal Hole Punch for sale (38,322)

Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle. Max. sheet length: 3,048 mm Max. sheet width: 1,524 mm Max. bending length: 2,500 mm Sheet thickness (steel ~410 MPa): 2.5 mm (90°) Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°) Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°) Max. bending angle: +135° / -135° Max. flange height: 165 mm Max. diagonal (rotatable sheet): 2,800 mm Min. sheet thickness: 0.5 mm Max. pack height (incl. pallet): 350 mm Max. load capacity: 5,000 kg Vertical stroke (loading table): 550 mm Rotation capability: 0°, 90°, 180°, 270° Automatic loading system with scissor lift table () Conveyor–destacker (PCD3015) for automatic feeding Fpedjyr Ackepfx Adrok Automatic panel bending center P4X-2516 Upper bending blade (LS1) Lower bending blade (LI) SiX CNC control system SOLE.P4 production management software OFFICE.P4 offline programming software ABA automatic blankholder (automatic length adjustment) CLA-A asymmetric auxiliary bending system UC1000-G13 gooseneck tool set Eroded clamp (for coated / special materials) PSE automatic cleaning & lubrication system SAP panel unloader / accumulator Spare parts kit (approx. €7,000 value)

Condition: used, Year of construction: 2003, XXL-Center RAS 75.06-2 long bending center for fully automatic positive and negative bending, Fodpezru Nzefx Adropk where it is not necessary to turn the sheet metal. Usable length 6400 mm Maximum sheet metal thickness (400 N/mm²) 1.5 mm Four motorized and extremely fast axes controlled by CNC (no hydraulics) For: • Upper and lower bending beam speed: 126 degrees/s • Upper beam speed: 60 mm/s • Back gauge travel: 12-750 mm • Back gauge speed: 350 mm/s • Bending accuracy (depending on the quality of the sheet metal): up to +/- 1 degree

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Fpodpfx Adjzryy Sjrok Technical data: - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: good (used), Motorized Swivel Bending Machine TOS Processing length: 2050 mm Maximum bending capacity (steel): 4 mm Fpjdpfozrgu Njx Adrjk Motorized back gauge Motorized clamping and bending Clamping height approx. 200 mm Bending radius adjustment manually from 0-100 mm The machine is in good condition and fully functional.

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. Fpsdpfszix Atjx Adrsk The line includes: Decoiler Feeder Perforating press - 1,200 mm width 2 punching dies: Die 1: 3×300 (2 mm hole diameter) Die 2: 1×1,200 (3 mm hole diameter) Pull-through cutting table Recoiler

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Fedpfxezrvdgs Adrjpk Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: new, Year of construction: 2026, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, SUMMER DISCOUNT DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic Fsdpfx Adegmhxaeropk LAN & Wi Fi communication Offset angle adjustment SPRING DISCOUNT

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. Fjdpfxjk D Nt Ds Adrspk -Punching capacity: see photo of nameplate -Projection: 360 mm -Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: good (used), Number of guide rollers: 5 Sheet width: 430 mm Fpsdegvl U Rjpfx Adrek Sheet thickness: 1 mm Top roller diameter: 2 top rollers - Ø 60 mm Bottom roller diameter: 3 bottom rollers - Ø 60 mm

Condition: used, Year of construction: 2005, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Empty weight: 7.000 kg Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 - └ Station type 1: Abrasive belt - └ Station type 2: Rotary brush - └ Station type 3: Rotary brush - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fedpfx Ajxwnbuodrjpk Lukas van Rossum

Condition: used, Year of construction: 2009, functionality: fully functional, working width 1100 mm 3 internal operator groups 1 external operator group Fpsdpfoznm S Tex Adrok belt cooling via liquid

Condition: used, functionality: fully functional, Year of construction: 1989, control type: CNC control, Hydraulic Swivel Bending Machine Manufacturer: RAS, Type: 74.40, 4060 x 3 mm Year of manufacture: 1989 Technical data Manufacturer: RAS Year of manufacture: 1989 Type: 74.40 Working length: 4060 mm Capacity: 3 mm Motor power: 7.5 kW Upper die stroke: 400 mm Back gauge adjustability: 80 mm Bottom die adjustability: 80 mm Bending angle: 0 – 180° Dimensions: approx. L 5.40 x W 1.90 (plus control arm) x H 2.50 m Weight: approx. 7 t Fodpszp Nu Hsfx Adropk Equipment • Controlled rear stop with sections: 10 – 1500 mm • CNC control: Multibend 8000 • Motorized bending die adjustment • Various bending tools: - Gooseneck die, H 130mm, length = 4060mm, segmented - Bending die 30 mm - Sharp die 45°, length = 4060mm - Sharp die 45°, length 4060 mm, raised by 20 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1964, Sheet width: 1650 mm Sheet thickness: 4 mm Straightening roller diameter: 45 mm Support rollers: 140 pieces Straightening rollers: 17 pieces Fodpfozty Dtox Adrepk

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Fpsdpoztp S Hefx Adrek Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm Fedpfx Aoztp Stjdrepk min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: new, Year of construction: 2026, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Your description for this machine will be as follows: "We offer a brand new 2026 model Ayba longitudinal and cross-cutting machine." If you have any questions or require further information, you can send us a message or call us. Fpedpfx Adoy Hi Nnerok

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2030.05.356, BIRLIK BK 1.25 X 63 – Heavy-Duty Swaging & Beading Machine A professional, motorized swaging and beading machine designed for forming, flanging, and reinforcing sheet metal components. Manufactured by Birlik Makina, this robust system is an essential tool for ventilation duct production. This machine comes as a complete production package, including a comprehensive set of various forming and profiling rolls as shown in the picture. Specifications • Manufacturer: BIRLIK Makina (Turkey) • Model / Typ: BK 1.25 X 63 Fodszbh U Repfx Adrepk • Year of Manufacture: 2005 • Serial No.: 2030.05.356 • Application: Beading, flanging, swaging, and crimping of round ducts, tubes, and fittings. • Shaft Center Distance: 63 mm • Maximum Sheet Thickness: ~1.25 mm (for standard galvanized steel) Key Features & Components • Extensive Tooling Package Included: Sold with a wide variety of interchangeable roll sets, allowing the operator to perform multiple operations including standard beading, crimping, flanging, and specialized profiling. • Motorized Operation: Equipped with a powerful motor and foot pedal control for hands-free operation, ensuring precise material feeding and high productivity. • Adjustable Bottom Shaft: Features easy alignment and depth adjustment of the rollers to achieve the exact profile depth and sharpness required. • Robust Industrial Build: Rigid cast iron frame and induction-hardened shaft components ensure stability and long-term geometric accuracy under continuous workshop loads. • Forward / Reverse Function: Convenient control system for versatile material processing directions. Condition & Availability • Status: Fully operational, well-maintained, and in good working condition. • Ready for delivery

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Fpjdohmmfkepfx Adrjk Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Sheet metal cabinet with hinged door, LID Original lid for the accessory cabinet Lid for FP1 / FP2 / FP3 with 2 sliding shelves without contents Length: 1000 mm Width: 750 mm Fedpfx Ajznn Hxodrepk Height: 960 mm

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, controller model: BMS 9, working width: 6,200 mm, Equipment: CE marking, documentation/manual, foot remote control, Used Biegemaster press brake, model BM 6.1,25 -- available from September 2026 -- Year of manufacture: 2002 Working length: 6200 mm Max. insertion depth: approx. 1130 mm Bending capacity, steel 400 N/mm²: 1.25 mm Bending capacity, aluminum 190 N/mm²: 2.00 mm Stands + clamping arms: 5 pieces Incl. electric shearing device Incl. manual and wiring diagrams Weight: approx. 3 tons Operating modes: - manual - Automatic operation with 9-fold program control BMS9 (description see PDF) Fpodpfx Aezkav Rsdrok The machine has been used little and is in good condition.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 29,658 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, controller model: Sinumeric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS 3000, laser power: 3,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 7 bar, cutting range flat at 90° (X-axis): 3,010 mm, cutting range flat at 90° (Y-axis): 1,510 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, AMARON has nothing to do with the machine. Fpsdpfx Adjyx Iqzjrek

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, 4 mm bending capacity, manual operation with a large counterweight, large protective housing, additional bending tools. Fpsdpfx Adezr Nrqorok

Condition: ready for operation (used), Year of construction: 1979, Available immediately ex-works: Swivel bending machine, Lotze Type 161 / 2500 / 6 Year of manufacture 1979 Bending length 2550 mm Material thickness up to 6 mm Drive power 7.5 kW Weight 6 tons Price: EUR 6,750.00 plus VAT, ex-works. Fpodpfxozr T A Tj Adrok

Condition: excellent (used), 305 USED Jeros Sheet Metal Cleaner for 58x78 sheets (sheets without edges or with two edges on the short sides) TECHNICAL DATA: - Power: 1.5 kW EXTERNAL DIMENSIONS (in cm): Fodpoyi Eqljfx Adrspk - Working width: 78. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: electric, For sale: lightly used sheet metal rewinding machine SVM-100, designed for automatic rewinding of sheet metal from large coil rolls into smaller rolls of 25m2 (1250*20,000 mm). The machine was manufactured in 2024, has been used very little, is in excellent technical and visual condition, and is fully ready for operation. It is an excellent solution for companies that produce roofing materials or other sheet metal products supplied in rolls. The machine automatically: - Unwinds the sheet metal from the coil up to 1 ton. If you want to rewind from 2-5 ton coils, an automatic unwinding unit is required to feed the sheet metal. - Winds the sheet metal into a roll. - Cuts the sheet to a specified length. - Allows the roll to be wrapped with stretch film. - Applies protective film to the surface of the sheet metal. The machine is connected – it can be inspected and tested. Technical specifications: Manufacturer: Foldsolutions / UAB Pakservisas Model: SVM-100 Year of manufacture: 2024 Made in: Lithuania Operating parameters: Sheet metal width: 1230–1260 mm Sheet metal thickness: 0.4–0.6 mm Maximum roll length: 20 m Roll diameter: approx. 300 mm Equipment: Automatic sheet metal winding Sheet metal cutting to a specified length Automatic roll packing process with stretch film Option to use protective film on the sheet metal Integrated length measuring encoder Touchscreen control panel Manual and automatic operating modes Pneumatic cutting system Adjustable operating speeds Length calibration function for precise production Emergency stop system Technical data: Electrical power: 400 V / 50 Hz / 3 phases Power: 2.6 kW Required compressed air pressure: 0.65 MPa Air consumption: 0.3 m³/min Dimensions (L × W × H): 2555 × 1730 × 1800 mm Weight: approx. 600 kg Fsdpfezibwgjx Adropk Application: Ideally suited for roofing materials, facade, sheet metal products, sheet metal processing companies, and other manufacturers who require fast, accurate, and safe preparation of sheet metal rolls for transport or storage. If you have any further questions, we will be happy to answer them.