Used Short Hobler for sale (4,587)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AA10003134, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,905 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 30 m/min, TECHNICAL DETAILS Working Area X-axis travel: 3,680 mm Y-axis travel: 1,905 mm Z-axis travel: 500 mm (with H50 suction cups) Traverse Speeds X-axis traverse speed: 25 m/min Y-axis traverse speed: 80 m/min Z-axis traverse speed: 30 m/min Milling Unit Number of axes: 5 interpolating axes Rotation direction: right/left Spindle Tool holder: HSK 63F Speed range: 600 – 24,000 rpm Power (S1/S6): 15/17 kW at 12,000 rpm Axis Movement C-axis rotation angle: 640° B-axis rotation angle: 270° MACHINE DETAILS Control: NC control Software: 3D CAD system Operation: eye-M operator console with integrated PC Electrical Data Rated voltage: 400 V Number of phases: 3~N Rated current: 84.0 A Frequency: 50 Hz Short-circuit withstand capacity: 10 kA Machine weight: 5,554 kg EQUIPMENT Pendulum operation Automatic axis lubrication Additional fixed control panel TECPAD remote control of machine functions 6 carrier rails Start L1825 Prisma Q working unit Air nozzle for tool Tool length measurement device Vise preparation for worktable with 6 carrier rails Fsdpfxsxcvlls Aabjpn Front stop row H110 for worktable with 6 carrier rails First side stop row H110 for worktable with 6 carrier rails The machine will be dismantled for standard truck transport, no excess width required. The current disassembly status can be seen in the photos.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: AE/020112, total width: 1,300 mm, overall weight: 2,750 kg, number of rollers: 4, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Overall width: 1,300 mm Electrical data Rated voltage: 400 V Frequency: 50 Hz Phases: 3 ~ Rated current: 180 A Short-circuit current: 10 kA Max. load current: 420 A Weight: 2,750 kg Fpedpfx Aasxmhiwsbsn EQUIPMENT Two rollers at the top Two rollers at the bottom Note: The machine was dismantled as part of a liquidation and is loaded onto a truck. The machine was fully operational at the time of dismantling.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 320 mm, travel distance X-axis: 240 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 495 mm, bar passage: 51 mm, Lathe with LNS bar feeder & additional equipment! The machine has been completely inspected and geometrically measured by the seller. It is ready for immediate use! TECHNICAL DETAILS Travel X-axis: 240 mm Travel Y-axis: 100 mm Travel Z-axis: 495 mm Max. machining diameter: 320 mm Bar capacity: 51 mm Main spindle speed: 5,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 5,000 rpm Sub spindle motor power: 22 kW MACHINE DETAILS Control: Mazatrol640T Fpjdpfx Aexg D Amsaben EQUIPMENT 2 x 12-station turrets with driven tools CNC option package EIA / ISO programming Tool eye Partition wall Automatic parts catcher with conveyor belt LNS short bar loader Quick Load Servo III High-pressure coolant 10 bar Chip conveyor Mayfran ConSep 2000 II

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1200 units per shift! Fjdpfx Aoxdibpjabjpn TECHNICAL DETAILS Production capacity: 150 units/h MACHINE DETAILS Electrical Data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra/Thin Spacer Frame Machine i-3 - CE version Warm-edge spacer manufacturing system Production of Intercept ULTRA stainless steel, ThinPlate, or BlackLine Note: The machine is available from 02/12/2025!

Condition: new, functionality: fully functional, Year of construction: 2025, A compound cone crusher is a type of crusher used in mining and aggregate industries to break down rock into smaller pieces. It combines the advantages of both traditional cone crushers and modern technology to achieve higher efficiency, better product shape, and reliable operation. Here are its key features, working principles, and typical usages: ### Key Features: Fpsdpfstxhybox Aabsn 1. Combination of Crushing Technologies: - Integrates both spring and hydraulic cone crushers to offer improved performance. 2. High Crushing Ratio: - Capable of crushing materials into fine and uniform sizes with high reduction ratios. 3. Durability: - Built with robust materials and components for long-lasting operation. 4. Adjustable Settings: - Allows for easy adjustment of the crusher settings to control the size of the output material. 5. Efficient Crushing Chamber: - Designed to minimize material clogging and ensure continuous operation. ### Working Principles: 1. Material Feeding: - Raw material is fed into the crusher through a hopper. 2. Crushing Process: - The material enters the crushing chamber, where it is crushed between a fixed cone (outer shell) and a moving cone (inner shell). - The moving cone is supported and driven by an eccentric shaft, which rotates and gyrates to crush the material against the fixed cone. 3. Adjustment Mechanism: - The gap between the moving cone and the fixed cone can be adjusted to determine the size of the output material. 4. Discharge: - Once crushed, the material exits the crusher through the bottom discharge opening. ### Typical Usages: 1. Mining Industry: - Used for crushing various kinds of ores and rocks, particularly in secondary and tertiary crushing stages. 2. Aggregate Production: - Ideal for producing gravel, sand, and crushed stone for construction and infrastructure projects. 3. Recycling: - Utilized for crushing construction waste and recycling materials to create reusable aggregate. 4. Construction Industry: - Applied in producing concrete and asphalt aggregates, road base, and other construction materials. Types of Cone Crushers Standard Cone Crusher: Suitable for medium crushing tasks. Short Head Cone Crusher: Used for fine crushing applications. Hydraulic Cone Crusher: Equipped with hydraulic systems for improved operation. Multi-Cylinder Hydraulic Cone Crusher: Provides better control and higher productivity. Spring Cone Crusher: Uses springs to protect the machine from overloading. Applications of Cone Crushers Mining: Crushing of ores for further processing. Construction: Producing aggregates for roads, bridges, and buildings. Quarrying: Breaking down rocks for use in gravel or crushed stone products. Recycling: Processing of demolition debris and concrete. In summary, a compound cone crusher is a highly efficient, versatile, and durable piece of equipment ideal for various crushing applications in the mining, aggregate, recycling, and construction industries.

Condition: refurbished (used), Year of construction: 2017, operating hours: 2,000 h, load capacity: 200 kg, arm reach: 2,600 mm, IRB 6700-200/2.60 The 7th generation of large industrial robots. The IRB 6700 family of robots is a natural evolution following 40 years of large robot heritage at ABB. This 7th generation of large ABB robots features a multitude of next generation improvements derived from intimate customer relationships and exhaustive engineering studies. Key features The IRB 6700 family is the highest performance robots in the 150-300 kilogram class, now with a 20 percent reduction in total cost of ownership achieved through more robust design, longer service intervals, increased efficiency and simplified maintenance versus the previous generation. Multiple variants These robots enhances ABB’s portfolio by combining greater uptime, higher payloads and longer reach for use in Spot Welding, Material Handling and Machine Tending applications at the automotive and the general industries. This array of robot variants has payloads from 150 to 300 kg, reaches 2.6 to 3.2 meters, and are avalible as floor mounted and inverted versions. Robust and reliable The entire robot structure has been strengthened with higher rigidity, resulting in increased accuracy, shorter cycle time and better protection. It has been built to withstand the harshest working environments and is available with ABB’s ultimate Foundry Plus 2 protection system. The IRB 6700 has also been validated and tested with more robot prototypes than ever before to ensure that the predictions for reliability were accurate in the real world. Simplified maintenance In designing the robot, easier serviceability was identified as a critical aspect for improving its total cost of ownership. Therefor service and repair time has been reduced by 15 percent. Access to motors has also been improved and technical documentation for maintenance has become easier to read and understand through the use of improved graphics and 3D simulations called “Simstructions.” Built around LeanID Every robot in the 6700 family has been designed to accommodate LeanID—a new Integrated Dressing (ID) solution meant to achieve a balance between cost and durability by integrating the most exposed parts of the dress pack into the robot. Equipping an IRB 6700 with LeanID makes it easier to program and simulate with predictable cable movements, creates a more compact footprint, and lengthens service intervals due to lessened wear and tear. Features and benefits: Increased service intervals and decreased service times Longer uptime—mean time between failures 400,000 hours Fpodpfx Aajxdtckoben Available with Lean ID for cost effectively increasing dress pack lifetimes More robust with a rigid structure and a new generation of motors and compact gearboxes Increased speed and shorter cycle times—on average 5 percent faster Improved accuracy and higher payloads Built to operate in the harshest environments—available with Foundry Plus 2 package 15 percent lower power consumption The IRB 6700 family includes 10 variants, available as floor mounted and inverted versions.

Condition: used, Field of application: Construction ? Polygonmach PVB150 Mobile Concrete Plant | Cold asphalt plant, RCC mixing plant, soil compound mixing plant. Emulsion mixing plant ? Polygonmach PVB150 is a next-generation mobile concrete plant designed to meet the demands of modern construction projects for speed, flexibility, and cost-efficiency. It offers dual-mode production – both Volumetric and Batch type operation – on a single platform, delivering perfect compatibility for all project types. ✅ Dual-Mode Flexibility: • Volumetric Mode: On-demand, instant production up to 200 m³/hour directly at the site • Batch Type Mode: Precision recipe-based production up to 100 m³/hour ✅ Key Features: • Fully Automatic or Manual Operation: User-friendly control panel allows seamless control • Precision Weighing System: Ensures accurate dosing, minimizes material waste • Multiple Mix Recipes: Easily switch between different mix designs • Separate Storage Bins: 3x8 m³ aggregate hoppers, 5-ton cement silo, water & additive tanks • Filling Conveyor: Fast and efficient loading • Quick Setup: Ready to operate in just 10 minutes • Fully Mobile: Maximum ease in site-to-site transportation • Low Logistics & Transport Costs: On-site production eliminates ready-mix losses • Sustainable Production: Mix only what you need, when you need it • Recycling-Friendly: Supports the use of recycled materials when needed ⸻ ? Multi-Purpose Capability – One Platform, Many Solutions: In addition to concrete production, the PVB150 is engineered to serve as: • Mechanical Stabilization Plant • Cold Asphalt Mixing Plant • Emulsion Mixing Plant • Soil Compound Mixing Plant This multi-functional system makes Polygonmach PVB150 the most versatile solution on the market for road construction, infrastructure development, and short-term or small-to-medium scale projects. Fpjdpfew Hztfox Aabsn ⸻ ?? 100% Made in Turkey | Smart Technology | High Performance | Eco-Friendly Operation ✅ Replace fixed plants with a smarter solution. ✅ Reduce setup costs, increase mobility, boost site efficiency. ⸻ ? Contact us today and transform your jobsite! ? ? ?

Condition: new, These are PDC drill bits (Polycrystalline Diamond Compact) from Baker Hughes (USA), used for oil, gas, geothermal, and water well drilling. 🔧 Function • Cut rock formations with synthetic diamond cutters (shearing, not crushing). • Drilling fluid cools cutters, removes cuttings, and reduces wear. 🛠 Advantages • Durable in hard/abrasive formations • Faster drilling (higher ROP) • Stable & efficient with technologies like Zenith cutters, CFD hydraulics, LMM, Quantec Force designs Fpjdpew R Ikwjfx Aabsn 🏭 Applications • Oil & gas rigs • Geothermal wells • Exploration in tough formations 👉 In short: High-performance drill bits for efficient, durable drilling in extreme conditions.

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 160 h, bale height: 1,200 mm, bale length: 1,200 mm, bale weight: 1,200 kg, bale width: 1,200 mm, maximum speed: 80 km/h, color: blue, empty load weight: 14,500 kg, loading space volume: 1.4 m³, first registration: 02/2024, total height: 4,000 mm, total length: 14,000 mm, total width: 3,500 mm, machine/vehicle number: 1132, Equipment: additional headlights, lighting, 2023 KOMSILAJ KM X1000-1200+60 Combined Baler and Wrapper Machine -Fully automatic system -Free installation and professional technical support -Ready for immediate shipment 🔧 Key Technical Specifications Fully automatic control: Maximum efficiency with minimal labor Production speed: 1 bale per minute Bale dimensions: 1200 x 1200 mm Maximum bale weight: Up to 1200 kg (depending on material density) Special cast bearing housings: High durability and long service life Hydraulic film wrapping system Hydraulic net or film wrapping system (dual system): Flexibility for various product types Shock-absorbed conveyor system: Reduces tension and prevents chain breakage Automatic chain lubrication system Automatic grease lubrication system Smart touchscreen with advanced software 4 integrated cameras – real-time monitoring via the control panel Fjdpowlhztefx Aabepn Machine History: The machine was initially purchased for a short-term sugar factory contract. After approximately 6,000 bales were produced, the project ended and it saw no further use. The owner is a contractor, not a farmer, and is now offering the machine for sale in excellent condition. 🌍 Komsilaj Quality – 40 Years of Experience Manufacturer: Komsilaj – Türkiye’s leading agricultural machinery manufacturer with 40 years of experience KOMSILAJ machines are in operation in over 60 countries worldwide — from Japan to Ecuador. Branches in Germany and Algeria Authorized dealers in Brazil, India, Pakistan, Iraq, and Iran. Suitable for packaging more than 20 types of agricultural products and various types of industrial waste As both a manufacturer and an active operator, KOMSILAJ continuously improves its machines based on real-world field use and customer feedback. All machines are CE/ISO/TSE certified, reliable, and built for intensive professional use.

Condition: excellent (used), functionality: fully functional, nominal power at 50% duty cycle: 14 kVA, input voltage: 380 V, type of cooling: water, overall weight: 300 kg, welding power (max.): 40 kVA, arm spacing: 450 mm, total width: 450 mm, total height: 1,450 mm, total length: 1,100 mm, stroke length: 110 mm, input frequency: 50 Hz, Spot welding machine Soudometal SP14P maximum welding current at 50 ED: 14 ​​kVA max. welding power 42 kVA Electrode force: 30-200 DAN Fodpfx Aaswkr Insbopn Electrode stroke = 30-110 mm Projection: 450 mm Mains connection 380V / 42A secondary current continuous current 1.85 kA; kA short-circuit current 12.5 kV; Electrode force: 30-200 DAN foot control Cooling water volume: 3 l/min Electrode arm Ø: 45 mm Electrode holder Ø: 25 mm Machine weight: 300 kb kg Dimensions: 1250x1100x450 mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Cassioli Sares Cavity Forming Line (Amelia) and Chimney Forming Machines comprising SMC Banco Assiemaggio Camini W11091658 Long Chimney assembly Equipment Fsdpexlqkzofx Aabepn SMC Banco Assiemaggio Camini W11091655 Short Chimney assembly Equipment ROBO Tox Clinching Machine for Burner assembly

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES Fpodpfx Aspbv Hgjabjn - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: like new (used), Year of construction: 2020, TS2-40 SCARA robot Fpjdpfxjw Rl Sre Aaben Stäubli is entering a new performance class with its TS2 SCARA series. The completely redesigned 4-axis machine with proprietary JCS drive technology facilitates ultra-short cycle times and high repeatability. It also has a revolutionary encapsulated design which opens up new possibilities for use in sensitive environments. It is piloted by the generic CS9 controller that also controls TX2 6-axis robots. The fast and compact TS2-40 robot has special features, such as a maximum payload of 8.4 kg with a 460 mm reach.

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, HDC3000 with 6 axes • Travel distances X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining, 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation • Spindle 10,000 rpm, HSK100, S1=220 Nm spindle torque • Tool changer system HSK100 / 60 positions – for tools up to 800 mm length • Chip conveyor • Optimized for 5-sided machining including deep-hole drilling • Coolant supply system Fedpfsxmr T Tjx Aabopn • Internal/external air blow-off device • ICS 60 bar for deep hole drilling • Fully enclosed machine • Large interference circle 2800 mm • Includes washing gun • Short delivery time, subject to prior sale

Year of construction: 2012, condition: like new (used), Ideal Table-top combination scale to make fixed weighing packages Multihead Scale The Table-top DataweighTM TDW-205W enables even novice workers to perform fixed weighing easily. Fpodpfxekvpmde Aabjn This is an ideal combination scale to reduce weighing loss and realize optimized inventory control. Catalog Features 【FEATURES】 ■ Eliminating weight shortage in fixed weighing ■ Dramatically increasing the production speed for fixed weighing ■ Improving weighing quality and reducing weighing loss ■ Waterproof IP-65, Stainless steel construction ■ Priority head combination function This function assigns a selected weigh head priority to always be included in the combinations. ■ Weight & Quantity combination function This function allows a combination to be made by a pre-determined number of weigh heads. ■ Unit weight setting function In order to remove irregular sized items, the lower and upper limits of the unit weight can be set in advance. ■ Production goal function The combination work will automatically finish when the goal, the pre-determined number of packages is achieved.

Condition: used, Brand: SOCO MC-350 Fpedpfxogtmi Uj Aabjn Suitable e.g. for cutting aluminum, brass, copper, PVC and carbon Cutting power tube at 90 °: 101.6 mm Cutting capacity profile, 90 degrees: 76.2 x 127 mm Saw blade dimensions: 355.6 mm automatic dosing length: 685.8 mm Grades: 2 Shortest cutting length (automatic): 1/4 ”6.35 mm Saw motor: 5 HP 1750 rpm Voltage: 220/3/60

Condition: excellent (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: PT-ZNY 155, film width: 440 mm, type of input current: three-phase, pressure: 8 bar, total width: 1,400 mm, total length: 7,000 mm, total height: 1,800 mm, input voltage: 400 V, compressed air connection: 7 bar, temperature: 150 °C, operating temperature: 30 °C, Equipment: safety light barrier, Packing vacuum machine (for cheese and other food products like minced/shredded). Working principle depends on the systematic process of heating, forming, filling, sealing and cutting stations. Simply cup form is provided from pet film at heating and forming stations, final cheese blocks after molding are inserted (filled) in formed cup as demanded capacity at filling station, after providing sealing between bottoms . Foil which is pet foil and top foil which is prompt at sealing station. Then the cup is cut in width and length at cutting station. Finally finished good product blocks vacuumed are carried on product exit conveyor which is being provided by thermoform machine. This machine was designed and bought as brand-new equipment. The equipment was received in May 2021, commissioned in Oct 2021 and worked not more than 2 months and not every day. It has around 200 working hours including tests. We stopped the activities with this equipment in 2022 because it was necessary to choose for our products a new way of vacuum packing. This machine didn’t need any other specific maintenance due to the short time frame working period. As for the accessories, this have the cooling station , a conveyer for making product blocks to be easily placed in the packing forms ; and including some forms for packing. About the service history, it is not the case due to the small amount of working time. Width of film foil: Upper 370mm (thickness 0.06 mm) ; Bottom 415mm (thickness 0.25 mm) Fjdpev Sr Nvefx Aabopn Forming depth : 90mm Transporting 12 nests with 2.3kg/nest (as our product had) Machine capacity: designed for 8.000-12.000 pcs/hour (differs by model of machine) Cooling with water: 15-20°C, 100 lt/hour Air pressure: 6 bar, 1200 lt/min Electrical load: 7kw, 400v, 3 phase Dimension: 3500 x 1200 x 2000 (differs by model of machine)

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: Fpodpfx Aajxmk Ebjben MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Fpsdpfx Aaju Dnruoben Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive Fpsdpfxetrlv Se Aabsn - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Power Split S30 (30 tons) = 2.960€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Condition: good (used), Year of construction: 1991, Schröder Kombinator emulsify-kombinator, type: EMK 01/3500, building number: 119567, year of construction: 1991, dimensions: 2900 mm x 500 mm x 800 mm. Model: Crystallizer Capacity up to 2.000 kg/h depending on product Product Margarine of shortening Fpedpfxoun Tr Tj Aabsn Year 1991 Power 7,5 kW Pressure Up to 20 bar Weight ± 1500 kg

Condition: new, overall weight: 10,500 kg, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, axle configuration: 2 axles, loading space volume: 42 m³, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fodexmibnspfx Aabjpn

Condition: used, Tenoning spindle 1 St Number of milling agregates 3 St. Spindle diameter 50 mm weight ca 7.500 kg Gubisch type EST-H 2000/2 ----- Machine still in use and can be inspected! Manufacturer's description: ----- single-sided angle combination for window and door production consisting of tenoning and slotting machine, angle transfer and trimming machine cross-cut saw: ----- P = 3 kW U = 3000-1 Saw diameter: 400 mm Flange diameter: 80 mm Adjustment: horizontal: manually adjustable, readable via mechanical digital display Length stop LAS ----- Adjustment: manual Length: extended to 3.2 m Slotting unit (cross processing) ----- P = 9.2 kW U = max. 4500 but depends on your tools and is adjusted accordingly Clamping height: 300 mm Useful height: 300 mm Shaft diameter: 50 mm Largest tool diameter: 400 mm max., 240 mm min. Adjustment: vertical Adjustment range: vertical 210 mm under table Number of tools: 3 tool sets of 100 mm each provided by customer 0-height 10 mm shortest workpiece: 320 mm + tenon narrowest workpiece: 48 mm widest workpiece: 170 mm 1st profile spindle ----- Spindle position: vertical right Function: profile production and automatic synchronization P = 9.2 kW U = 6000 rpm Clamping height: 100 mm Effective height: 100 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, tool 0-height 10 mm Number of tools: 1 a 100 mm Clamping length max. 2nd profile spindle ----- Spindle position: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm 3rd profile spindle ----- Spindle position: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Effective height: 300 mm Diameter: 50 mm Flying circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm Number of tools: 3 a 100 mm clamping length max. 4th profile spindle (glazing bead sawing unit) ----- Spindle position: horizontal top, right P = 3.0 kW U = 3000 rpm Flying circle diameter: 250 mm Clamping flange holder: 60 mm diameter Hydraulic adjustment: automatic up/down, forwards/backwards for 1 basic height and 1 basic depth Further technical details ----- Clamping table Slotting unit ----- On ball guide bush and roller guides Manual swivel range: 60 degrees in both directions Speeds: 0 - 28 m/min. infinitely variable 4 speed ranges fast feed in front of slotting unit slow feed in cutting area adjustable fast feed for transfer fast return Counter beam: Counter beam changes automatically with spindle stroke Fpodsxmk Dwepfx Aabjn Transfer type to profile area: automatic Operating mode: Single part production, frame-by-frame production and series production possible Longitudinal profiling ----- Width adjustment: against man. Turret stops Differences of up to 30 mm are absorbed by the pneumatic spring-loaded fence Range: 48 - 170 ...

Year of construction: 2010, condition: good (used), Sorma CR1-104 single lane counting conveyor. Mobile. Dimensions approx. 500 mm infeed, 1.1 m outfeed. Overall length 1.8 m long.--shorter one Longer one is 3,6m long and costs +1400 eur Fodpfstq Iw Eox Aabopn

Condition: used, Year of construction: 2021, axis stroke (X,Y,Z) 4062, 2,922,660 mm Number of spindle head vertical 13 St. Number of spindles head horizontal 6 St. Number of tools 27 St. Number of milling agregates 1 St. working dimensions 3200,1500,200 mm Motor output 12 kW control BECKHOFF MASTERWOOD Project 385 (Winner) ----- Exhibition machine built in 2021, available immediately! 5-axis CNC machining center in portal design for use for Interior fittings, doors, stairs optionally expandable with solid wood clamps Frame processing and arched windows Short Summary: ----- Workspace: X = 3200mm ; Y = 1500mm; Z = 200mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F mount 1 piece of permanently installed drill head with 19 spindles with 7 individually accessible vertical drilling spindles in the X direction with 6 individually accessible vertical drilling spindles in Y direction with 2 double horizontal drilling spindles in X direction and 1 double horizontal drilling spindle in Y direction Sawing unit integrated into the drill head 27 tool changing positions: Carousel tool changer with 22 positions and 102 mm grid spacing Linear 5-fold tool magazine for large tool diameters Original SCHMALZ tubeless work table. Console table with 6 traverses Workpiece lifting device Automatic tool length measuring device. Pack of 12 original Schmalz vacuum cleaners 114 x 140 mm height = 125 mm 1 piece Becker vacuum pump 100m3/h 1 piece chip conveyor belt Construction software Masterwork: 2D-Wop for standard application panel processing/interior construction, arches, doors Master 3D Level 2: for more complex processing, Optionally also expandable for 5-axis fully interpolating Prepared for the use of solid wood tensioners (round arches), Tensioner offered as an option if needed later Technology according to the enclosed, detailed description ----- Total price in this version from the Oberkochen warehouse: on request! ----- Freight and commissioning on request! Fpjdpsxmk Atsfx Aaben Options for frame production/round arch with additional costs: ----- Reference ring for holding chip guide elements on 5-axis electrospindles with HSK 63F mounts: 410.00 euros Basic kit for clamping arch elements - 6 pneumatic tensioners with two movements for arch elements: 7,090.00 euros (technical information according to the manufacturer - no guarantee!) Chip guide elements, price per piece: 460.00 euros All prices mentioned are net, plus tax. (technical information according to the manufacturer - no guarantee!)