Used Shot Blasting Machine for sale (65,267)

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, Kolbus DA 270 Used hardcover production machine for book covers, file cases, calendar backs, or games Year 2010 Standard equipment Cardboard pre-stacking belt Sheet feeder for non-stop operation Fault monitoring during gluing Utility cylinder with grippers and interchangeable die plates External glue application Unit for padded covers Automatic cover counter Programmable automatic settings, motor-driven adjustments Speed up to 65 cycles/min Unit for processing roll spine material Bodozxdhmepfx Abtell Heated glue application rollers and doctor blade Viscosity control unit for automatic water supply to ensure consistent glue viscosity Unit for mirror gluing with hotmelt Board spine magazine Small format unit Large format unit (height) for open cover format of max. 670 × 405 mm Large format unit (width) for open cover format max. 678 × 390 mm, width max. 718 mm Corner trimming device (manual operation) Unit for processing asymmetric covers and sheets Unit for processing thin boards Optional equipment for viscosity control unit Available in stock

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Bsdezw Tw Uopfx Abtell Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: good (used), Polar Mohr N 78 Plus Paper Guillotine Machine serviced and ready to work. Like new. Manufactured in 2018. Technical specifications: Cutting width: 780mm Stack height: 120mm 21.5″ LCD display 400V power supply Weight: 1400kg Enlarged side tables. Chrome table surface Table lighting and optical cutting line Continuously adjustable clamping force Additional rear table guards. Spare knife, cutting sticks, tapping block, and operating tools. Blsdpozw Ty Aofx Abtsl

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Blodpfxjzw Tzmj Abtsl Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Year of construction: 2021, condition: ready for operation (used), For sale is a professional sharpening machine, the Forestone 2, specifically designed for the precise and automated sharpening of TCT saw blades (Tungsten Carbide Tipped). This machine is ideal for restoring the geometry of band saws with carbide-tipped teeth, ensuring maximum tool life and clean cutting quality. Blodpfx Abezxpr Rjtol

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Bledpfx Aszv Nkbjbtsl Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: good (used), Used milling machine, Huron model NU 4. Its robust construction and precise design enable accurate metalworking. The machine is in good working condition and ready for operation. We provide on-site machine loading. Net price, 23% VAT applicable. Feed rate: 1.6-820 mm/min Spindle speed: 30-2066 27 spindle speeds Travel: Y: 700 X: 1100 Z: 470 Work surface of the table: 455x1435 Spindle taper: ISO 40 Bodpozvuyusfx Abtjll

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) Bodezwuu Ujpfx Abtsll -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3649.63 € 15 mm B 16 214 mm 40 - 4000 U/min 0,54 kW Bledozv Ey Sepfx Abtol M10 355 mm 485 mm 1027 mm 70 kg 125 - 490 mm 300 x 250 mm 82 mm THE HEIGHT-ADJUSTABLE HEAD MAKES IT IDEAL FOR SHORTER USERS, E.G., FOR TRAINING WORKSHOPS AND SCHOOLS PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 13 / 15 (in E335/ST60) Manal feed Tapping device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front Head height adjustment via toothed rack LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation Art. - No. 212.650 with B16 spindle Art. - No. 212.655 with MK 2 spindle (price on request) OPTIONS: Machine cabinet Drill package

Condition: new, total height: 2,600 mm, overall weight: 7,000 kg, Main technical indicators: 1. Maximum processing width: 1300mm 2. Processing thickness: 0.5-100 mm 3. Minimum processing size: ≥50×50 mm 4. Feeding speed: 0.5-6m/min 5. Roller brush speed: 8-20r/s 6. Revolution speed: 8-12r/s Blsdpfxozwmpko Abtol 7. Rated power: about 88KW 8. Abrasive belt size: 2200×1620 mm 9. Sand roller size specifications: Φ300×400 mm 10. Worktable height: 900-980mm 11. Equipment noise: ≤ 85 dB 12. Dust removal efficiency: ≥ 85% 13. Required vacuum air volume: 5000 cubic meters/hour 14. Control system: Siemens PLC CNC

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, overall weight: 250 kg, coolant pump power: 1 W, working width: 80 mm, grinding wheel diameter: 125 mm, number of planer blades: 5, input voltage: 400 V, type of input current: three-phase, operating speed: 15 mm/s, grinding length: 630 mm, warranty duration: 12 months, input current: 2 A, spindle speed (max.): 3,000 rpm, spindle speed (min.): 3,000 rpm, input frequency: 50 Hz, spindle height adjustment: 125 mm, AUTOMATIC PLANING KNIFE GRINDING MACHINE Knife Grinding Length is 630 mm AVB-PGM630 is specially designed to grind the planer knives up to 630 mm in length for wood, metal, and paper industries. It is constructed with a linear rail block system for high efficiency and long life. Knives mounted on the plate could be rotated +/- 90 degrees. Also, complete with its multiple knife mounting attachment, it is possible to grind at most five pieces of planer knives at one time. There are 11 various speeds up to 11 mt/min with a microprocessor control coolant ready system. AVB-630PGM AUTOMATIC PLANER KNIFE GRINDER Equipped with a CNC linear Bearing system AVB-630PGM is specially designed for grinding the planer knives up to 60 cm in length. Complete with a multiple knife mounting attachment system. It is possible to grind at most five pieces of planer knives at one time. GENERAL FEATURES • Automatic planer knife grinding up to 600 mm • Speed control between 0-11 Mt/min. • Mechanical knife attachment • Microprocessor Controlled • Grinding Head riding on linear rails • High precision of 0,02 mm infeed amount • Non-corroding and hardening plating on all mechanical components • CNC bearing system extends machine lifetime and enhances the grinding quality • Possibility to attach a maximum of 5 pieces of blades on the same plate • Rigid machine base • Production confirmed with CE standards TECHNICAL SPECIFICATIONS • Grinding Length 600 mm • Plate dimensions 60*80*600mm • Grinding Wheel Diameter Ø100/150mm • Motor Quantity 3 • Grinding Speed 0-11m/min. • Automatic Infeed 0,02mm • Operating Voltage 380 V ,50-60 Hz, 3 Phase • Coolant Tank Capacity ͠ 30 Lt. • Net/Gross Weight 430/450 kg • Dimensions 60*160*140 cm MOTORS on THE MACHINE Grinding Wheel • Grinding Wheel 1,1 KW- 2800 rpm D:Ø100/150 mm • Coolant 0,09KW-2800 rpm d:Ø20 mm • Grinding head horizontal movement 0,37KW-2800 rpm H:60-80mm Bledozwm Duepfx Abtel

Condition: excellent (used), CATALOG NO. 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between outermost spindles: 900 mm - Spindle pitch: 32 mm - Table surface: 700x1220 mm - Table height: 930 mm - Pneumatic clamps: 3 pcs - Drilling vertically, horizontally, and at an angle - Vertical/horizontal operation – pneumatic table adjustment - Pneumatic lifting of drilling head - Dimensions (L/W/H): 1400/1050/1400 mm - Weight: 744 kg ADVANTAGES – Manufactured by Italian brand SCM – For 29 drills – Not repainted – Very good condition – Used drilling machine Bledpfx Aezwpaxobtsl Net price: 5,900 PLN Net price: 1,400 EUR at an exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: Bjdpfx Ajzwpxnobtell – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 83670 € 1581.36 € 810 mm 610 mm 800 x 400 mm 800 x 400 mm 5 - 25 m/min 0 - 2.250 mm/min 450 mm 0 - 675 mm/min 480 mm 500 - 2200 1/min 3,75 (optional 5,5 / 7,5) kW 1.5 kW 3250 mm 3075 mm 2250 mm 2900 kg 175 kg 350 kg 355 x 50 x 127 mm 1,1 kW Fully enclosed splash guard 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Bledpfszwqa Hsx Abtsl Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list automatic vertical feed servo drive for grinding wheel feed and table cross feed heavy duty spindle with 2 sets (4) of class P4 super precision angular contact ball bearings hardened and ground C2 grade ballscrew on crossfeed and elevation hardened slide ways electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation grinding wheel grinding wheel flange grinding wheel balancing stand LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH OPTIONS (PRICES ON REQUEST): autom. dressing attachment mounted over the wheel version without fully enclosed splash guard

Condition: used, Year of construction: 2005, Manufacturer: KRAUSS MAFFEI, Type: 1600-8100-1400MX, Year of manufacture: 2005, Serial No. 61007140, Control system: Krauss Maffei MC5, Clamping force: 1,600 t, 2 injection units, Minimum/maximum mold height: 700/1,600 mm, Platen spacing: 3,400 mm, Clear opening horizontal/vertical: 1,850/1,400 mm, 12 cascades, 48 hot runner nozzles, Core pulls hydr. 5 (DS) 5 (AS), Screw diameter: 105/60 mm, Injection weight: 4,100/600 g, Part removal robot, Manufacturer: Krauss Maffei, Belt conveyor, approx. 5,000 x 1,400 mm Blodpfx Ajzn Aqfsbtol +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2000, Machine is with SK 30 Bodsznmqispfx Abtoll 20.000 rpm Parts shown by hand not come.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: G3640-0539, nominal power (apparent): 93 kVA, rotational speed (min.): 11 rpm, rotational speed (max.): 8,000 rpm, overall weight: 12,000 kg, spindle speed (min.): 11 rpm, spindle speed (max.): 8,000 rpm, input voltage: 220 V, type of input current: AC, We offer this used Hyundai WIA KH50G horizontal machining center, year of construction 2011. (German template: "Wir bieten diesen gebrauchten Hyundai WIA KH50G Horizontal-Bearbeitungszentrum, Baujahr 2011, an.") Model: KH50G Serial number: G3640-0539 Voltage: 220 V Frequency: 60 Hz Rated power: 93 kVA Full load current: 87 A Control voltage: AC 110 / DC 24 V Electric diagram: 2010-H3 AY1 Spindle speed: 11-8000 min^-1 Ultimate breaking capacity: 50 kA Service breaking capacity: 25 kA Weight: 12000 kg Produced date: 2011.06 Bjdpfx Abjzxiz Sstell If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2008, condition: like new (used), functionality: fully functional, Elumatec SLK 118 3-axis CNC profile machining center. Bjdoyr Ai Depfx Abtjll Bar processing center with 3 controlled axes; designed for machining aluminum and thin-walled steel profiles and extrusions, as well as aluminum, PVC, and lightly alloyed steel. Especially suitable for companies processing Neher insect screen profiles or those looking to automate their door production. Machining from above; workpiece rotation for processing the opposite side. Technical Data: Travel range X-axis: 2450 mm / max. speed 36 m/min Travel range Y-axis: 350 mm / max. speed 15 m/min Travel range Z-axis: 280 mm / max. speed 15 m/min Spindle speed: 18,000 rpm. 6.5 HP (4.5 kW) motor-driven spindle Minimum quantity cooling system Dimensions: 3100 x 1850 x 2250 mm (122" x 73" x 89"). Weight: 1,400 kg (3,087 lbs). Equipment: PC touchscreen control with Windows software, 4 material clamps The machine is in exceptionally good condition.

Condition: used, Year of construction: 2006, Equipment: documentation/manual, Control Fanuc 0M Two palletes Table dimensions – 650x420 mm Axes: X 580mm, Y 420 mm, Z 490 mm Spindle 12 000 rpm, SK40 Machine dimensions 2500 x 2100 x 2500 mm Blsdezxxv Espfx Abtjl Machine weight 3900 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11045529844, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 20,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 20,000 mm, nominal power (apparent): 50 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,700 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 50 EVOLUTION CNC Universal Machining Center - Tool holder: SK 40 - Resolution of the linear measuring system X/Y/Z: 0.001 mm - Positional tolerance in X/Y/Z: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool change: 6 kg - NC rotary table with swivel axis, clamping area: 500 x 380 mm - Distance between T-slots: 63 mm 14 H 7 - Centering bore: 30 mm - Swivel speed: 26 rpm - Swivel range: 180° - Input and display resolution: 0.001° - Max. weight: 330 kg - Includes three-jaw chuck, diameter: 250 mm - Includes the tool holders located in the tool changer Bodpezxyuisfx Abtsll - Includes chip conveyor and coolant system Note: the machine can be transported on a standard truck! FCA D-63843 Niedernberg - loaded onto a truck

Condition: used, Year of construction: 2017, Overview This Gruber KombiKEG is a semi-automatic combined keg cleaning and filling machine for kegs and one-way kegs, rated at approximately 30 kegs per hour. Cleaning, sterilisation and filling run as one automatic cycle: interval cleaning of keg wall and down tube with caustic and acid, steam sterilisation, and counter-pressure filling with differential pressure control. The machine was installed in 2017 by BRAUKON and is fed by stainless steel roller conveyors on the infeed and outfeed side. The machine is built entirely in stainless steel and carries one cleaning head, one sterilisation station and one filling head. Filling runs with CO2 or nitrogen. Control is a Siemens SIMATIC PLC with a colour touch panel for settings, temperature and differential pressure control, error messages and counters. It is still installed, connected and in production, and can be visited in operation on request. Technical data - Manufacturer: Gruber (Alfred Gruber GmbH, Austria) - Model: KombiKEG - Year of manufacture: 2017 - Machine type: semi-automatic combined keg washer and filler, one cleaning head / one sterilisation station / one filling head - Capacity: approx. 30 kegs/hour - Kegs: stainless steel kegs with "A" type head and one-way kegs, all common fitting systems Bledpfszxt Atsx Abtjl - Functions: interval cleaning (caustic and acid), steam sterilisation, automatic filling - Filling gas: CO2 or nitrogen - Control: Siemens SIMATIC PLC, colour touch panel HMI - Detergent tank: 175 l, insulated, integrated, with steam heating coil, control valve and steam trap - Pump: 1.1 kW with electronic dry-run protection - Construction: stainless steel 1.4301, stainless steel switch cabinet, no electrical components in the wet area - Pneumatics: Festo multipole valve block, pneumatic piston valves - Dimensions: approx. 140 x 126 x H 230 cm (machine without conveyors) - Installed footprint: approx. 449 x 98 cm including the infeed and outfeed roller conveyors - Power supply: 7.5 kW max. - Air supply: 2-3 bar, approx. 0.35 m³ per keg - Steam supply: 3-4 bar Equipment - Stainless steel roller conveyors, infeed and outfeed - Steam generator - Two vent valves for fast and complete filling - Pressure switch flow line monitoring and electronic return line probe - Keg valve open control, work tables with keg stop logs - Front panel to switch between filling and CIP cleaning - Technical documentation, conformity certificate and machine layout drawing - Spare parts Condition Used, in production and still installed under power. Approximately 3,000 operating hours, around 90,000 kegs filled and 75,000 kegs cleaned. Last production April 2026, last maintenance January 2026. The machine is clean, maintained and ready to produce. It is being replaced by a higher capacity machine. Availability Immediately available. Location: France. Dismantling, handling and truck loading are included by the seller (EXW loaded).

Condition: excellent (used), 527 USED Krumbein KSSM V0.1D pastry slicer. TECHNICAL DATA: Bljdpfx Ajzxrw Ajbtsl - max product dimensions: 600 x 400 x 55 mm - adjustable cutting width - two-stage cutting: crosswise and lengthwise - power supply: 400V 3Ph 50/60Hz - weight: 165 kg EXTERNAL DIMENSIONS (in cm): - W: 85 cm - L: 112 cm - H: 154 cm The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. 2 pcs. Götzinger drilling and milling centers ----- For sale on behalf of a customer! 2 identical machines: One machine for "left" parts and one for "right" parts. The machines can also be used individually. The machines were controlled via window manufacturing software, but can also be operated via the machine software. Blsdpfx Aov N N Spebtol Both machines are equipped identically: - Left and right drilling units for front-end drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once, and the unit carrier then moves for the various machining operations. Installation length per machine approx. 6 m. Individual sale possible: Price per machine 10,000 Euro See the enclosed PDFs for more information.

Condition: ready for operation (used), - USED - PILLAR-TYPE DRILLING MACHINE POWER SUPPLY: 400V-50Hz MAX DRILLING DIAMETER: 25 mm SPINDLE: CM3 TABLE SIZE: 350 x 350 mm WEIGHT: 250 Kg Blodpfxezxu Nue Abtjl OVERALL DIMENSIONS: 550 x 850 x 1700 mm NOTE: ROTARY TABLE WITH CLAMP

Condition: used, functionality: fully functional, Robust Polar quick cutter 80 cm cutting width Blsdpfxszx Dknj Abtol 12 cm cutting height Hydraulic clamping Includes 2 blades 1500 kg Collection only