Used Signa Station for sale (8,127)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Bodpemck Ryjfx Abzsdi Weight approx. 1000 kg good condition

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Available immediately Bsdpfx Abslhqdmezjdi

Condition: excellent (used), Year of construction: 2014, This unit is in almost as new condition, has come from a closed protein powder facility. Bdsdpfsw R Ec Djx Abzji

Year of construction: 2014, condition: used, JetPetroClean container washing station Producer: OU Dontal, Estonia The installation is used to clean the inside of petroleum products tanks, especially railway cisterns. The cleaning process takes place in a closed system using hot water or hot water with detergents. Washing consisted in introducing a washing head through the upper hatch of the tank, and then washing the inside of the tank under a specified pressure. Dirty water was drained to the container tank by means of the lower inlets of the cistern, by means of diaphragm pumps. There, after the separation of impurities, the water returned to the circulation and was reused for further washing. It took about 1 hour to wash one tanker. The next step was to dry the inside of the tank and remove solid waste from the inside of the tank using exhaust fans. After the washing process was completed, the installation was blown through and dried using compressors. 1. Main container unit: Bodpfxohgimdo Abzodi 20-feet container - year of production 2014 two main Lowara pumps - year 2014 hydraulic system with pressure gauges washing water tank (water tank 5770 L, waste tank 2540 L) Control cabinet compressed air tank 2. Auxiliary unit: 20-feet container - year of production 2012 two compressors GD ESM 11-7.5A - year of production 2013 gas generator - year of production 2015 control cabinet Meganex 15 kW electric heaters - year of production 2014 four Soler & Palau CBRT / 2-502 5.5 kW fans - year 2014 two diaphragm pumps compressed air tank 3. Waste container in a container construction 4. Rigid steel pipes and plastic hoses 5. Structures, platforms, stairs and railings for handling tanks 6. Washing heads, knees, valves and other elements of the hydraulic system. . Technical condition: used installation, for technical inspection before restarting.

Condition: used, Double storage station stacker. Designed to serve production lines for drilling, squaring, edging, squaring, pantographing, sanding and painting without operator supervision. Fully automatic not need for manual adjustments during the manufacturing process. Bodjqvt D Uspfx Abzodi Working dimensions: * Maximum length: 3000 mm * Maximum width: 1300 mm * Automatic double station panel unloading system. * Work capacity 13 minute cycles * Panel gripping system via motorized arm with suction cups with vacuum drive system TECHNICAL DETAILS TO BE CHECKED

Year of construction: 2016, condition: used, functionality: fully functional, The Vetaphone Corona Treatment System is used to boost surface energy before winding on film extruders, or prior to a laminating, printing, or coating process, in order to ensure good adhesion and high quality on the final product. Station VE1C-A(C4) 1920 QC, generator iCorona2-6kW, remote control TF415, ventilator RD62, transformer iHP200 6kW, 4 ceramic electrodes (not included). Bdjdpfow I D Uyox Abzoi

Condition: used, mileage: 2,29,530 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, overall weight: 1,975 kg, empty load weight: 1,435 kg, maximum load weight: 540 kg, first registration: 07/2007, emission class: euro5, color: silver, tire size: 205/55 r16, machine/vehicle number: 247, Equipment: ABS, airbag, fog lights, trailer coupling, CD player power steering Electric windows Soot particle filter Black fabric interior air conditioning Steel rims 5 seats cubic capacity 2.000 cm³ Bdsdpjqu Rnkjfx Abzji Errors excepted

Condition: good (used), Good condition. Bodpfx Asxbpgyobzedi

Condition: used, Year of construction: 2018, functionality: unexamined, machine/vehicle number: 87874 DS, power: 10 kW (13.60 HP), Arnold stapling station: Bsdjrvyrbspfx Abzsdi Max. Back-up fuse: 63 A Mains connection: 3 x 400 VAC + N + PE Power: 10 kW Control voltage: 24 VDC Incl. KLH Kältetechnik W05.HL3 and Trumpf TruPulse 103

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Sportsman "EX" 10 Station 8 Color Press with (8) Wing-Tip Flood Bar 10 Deg 16", (1) Ext. Communication Cable 20' long, (1) Non-Adj. Tri Loc 23x31 (1) M&R Red Chili "D" 20x24 Flash Cure Used for very short period of time. Counter total is 27868. Working perfectly. Price: $42,000 Terms: Sold EXW Balıkesir, Turkey Buyer is responsible for all additional costs, including pickup, crating, international shipping, freight forwarding, customs clearance, duties, taxes, and insurance. Bsdpfx Absupqmqjzsdi The equipment is in excellent condition and ready for immediate transport. Full payment via international bank wire (SWIFT) is required before release.

Condition: used, Double picking station feeder. Designed to serve production lines of drilling, squaring, edging, squaring, pantographing, sanding and painting without operator supervision. Fully automatic not need for manual adjustments during the manufacturing process Working dimensions: Bdsdpfxjqvt Ecs Abzei * Maximum length: 3000 mm * Maximum width: 1300 mm * Automatic double station panel unloading system. * Work capacity 13 minute cycles * Panel gripping system via motorized arm with suction cups with vacuum drive system TECHNICAL DETAILS TO BE CHECKED

Condition: used, Used surface plate with stand Bsdew Tdfvepfx Abzsdi

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Bdjdpfx Abeh Akm Tjzji

Condition: good (used), functionality: fully functional, Offered is a boot cleaning system for cleaning boots and work shoes. Further details on request. Payment in cash or in advance! Bedpsw Tm Hiefx Abzsdi Sale only to businesses. No guarantee, no warranty.

Year of construction: 2013, condition: not inspected (used), functionality: unexamined, controller manufacturer: Siemens, controller model: SIMATIC, No minimum price – guaranteed sale to the highest bidder! Submitting a bid constitutes an obligation to collect the item within the specified timeframe, no later than 31/07! TECHNICAL DATA Joining force: max. 60 kN MACHINE DETAILS Dimensions & Weight Machine complete, operational: 22,000 kg Base machine: 20,000 kg Pure water tank: 1,500 kg Chip conveyor: 500 kg Machine with coolant tank and chip conveyor (without chip bin) W × D × H: approx. 5.40 m × 5.95 m × 3 m Machine during maintenance (space required to open control cabinet doors): approx. 6.0 m × 6.55 m × 3 m Storage conditions Temperature: -10°C to +50°C Relative humidity: max. 80% (non-condensing) Operating conditions Bjdpfx Ajwyldnsbzedi Temperature: 15–35°C Temperature fluctuation max.: ±2°C/12 h and 2°C/h Relative humidity: max. 80% (non-condensing) Dust content at installation site: 1 mg/m³ Installation: in a closed, draft-free room Connection rating: 63 A EQUIPMENT With SIEMENS SIMATIC touch panel With partial conveyor belt

Condition: used, Year of construction: 2010, overall weight: 30 kg, System for argon/gas External dimensions: Width: 500 mm Bedpsw Sdk Nofx Abzsdi Depth: 500 mm Height: 600 mm Weight: approx. 30 kg Condition: good, second-hand

Condition: used, Automatic double cell unloader without pit for use in a squaring and edge banding line Motorized panel introduction transfer Bodpfxorzhfts Abzsdi Double automatic panel unloading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Martyr panel management system Programming and control system

Year of construction: 1998, condition: excellent (used), sheet cutting station and printing boxes 8" and 8"1/3 Bedpeiywg Iofx Abzsdi

Year of construction: 2019, condition: ready for operation (used), Used for autoclave sterilisation, an on-site inspection is possible. Bedpfx Ajq Rfl Njbzedi

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: JZ1030) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms Bdsdpfxsl Hyfcj Abzoi N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: used, Automatic double cell loader without pit for use in a squaring-edging line Motorized panel introduction transfer Double automatic panel loading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Bdjdporzhfhsfx Abzsi Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Programming and control system

Year of construction: 2018, condition: ready for operation (used), A hand sanding station from Aurtec is available. Sanding belt width: 150mm, belt length: 3500mm, belt thickness: 4mm, speed: 500rpm. Documentation available. On-site inspection is possible. Bjdpfx Aev Np U Dobzsdi

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Bdedot Ty A Aopfx Abzei No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: used, Multi-station bridge unloader for unloading panels from an angle saw Panel Size: * Maximum length: 3200 mm (4200 – 5600 mm) * Minimum length: 300 mm * Maximum width: 1300 mm * Minimum width: 200 mm Bdodjrzhd Sopfx Abzoi * Maximum thickness: 150 mm * Minimum thickness: 10 mm * Maximum height from the ground: 1850 mm * Minimum height from the ground: 250 mm * Maximum working height: 1600 mm Load capacity: * Maximum weight per cycle: 250 (350 – 500 – 700) kg Work rate: * Charger: 8-10 cycles/minute * Unloader: 8-10 cycles/minute This unloader is particularly suitable for moving significantly heavy boulders in various product double beam structure and the Brushless motors make it fast and suitable for the automation of high-performance lines productivity []

Year of construction: 2008, condition: ready for operation (used), A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible. Bdodevvwn Sjpfx Abzsi