Used Size Press for sale (27,567)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Dcjdpfswypp Iox Aa Neg Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: ready for operation (used), Year of construction: 2005, Bobst SP 104 ER Die-cutter Diecutter with stripping and blanking station Technical specifications: Paper min. 90 g/m2 Dcjdpowgz H Eefx Aa Njg Cardboard max. 2000 g/m2 Corrugated board max. 4 mm Min. sheet size: lxw 350 x 400 mm Max. sheet size: lxw 740 x 1040 mm Max. dimensions of cutting die: Max. lxw 725 x 1040 mm Cutting force: 250 tons Running speed: max. 8.000 s/h. Centerline for job quick-change Adjustable centering at the stripping and at the delivery, Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic) Non Stop Feeder, Steel plate, Double Sheet Sensor, Left hand pull lay, Right hand pull lay, Micrometic adjustment, Centerline, Double Action Stripper, Blanking Station, Quick lock stripping frame,

Condition: ready for operation (used), Year of construction: 2006, Bobst SP102-BMA Foilmaster Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Dsdpfx Aaewgz Rks Njcg Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: excellent (used), Year of construction: 1987, Universal non stop Feeder In line pile preparation 4 fron lays Pull guide OS 16 INDEPENDENT HEATING ZONES Honeycomb Dodpjvyn Ttsfx Aa Nocg Leteral guiding device for foil Motorized foil tension, air cooling Size 102x72 cm Min size 40x35 cm Speed with hot stamping 5000 per hour max Speed for die cutting 7500 per hour max

Condition: ready for operation (used), Year of construction: 1983, BOBST SPO 1600 Djdpfxexcayys Aa Necg Max Speed 5000 per hour Year 1983 Max lenght 1075mm Max width 1580mm Fully reconditioned by Bobst 2015 Central line

Condition: excellent (used), Year of construction: 1960, Format (cm): 54x72 Dedpfsy Nmhmex Aa Njcg Number of Colors : 2 (round+flat)

Year of construction: 2026, condition: new, High precision servo feeder solutions for press lines, punching systems and automated metal forming applications. Bosporas Machinery is a manufacturer of coil processing, press feeding and automation systems, delivering high-performance and customized industrial solutions worldwide with strong R&D capabilities. Our servo feeder systems are designed for accurate, synchronized and repeatable material feeding in press lines, punching operations and automated production systems. Equipped with advanced servo motor technology, the machines provide precise feeding length control, high-speed response and stable production performance. Suitable for both standalone use and complete line integration, Bosporas servo feeders can be customized according to material width, thickness, feeding length and production requirements. Whether for new investments, line upgrades or replacement projects, we provide reliable and efficient feeding solutions for modern manufacturing environments. ⚙️ AVAILABLE SOLUTIONS Standalone Servo Feeders Press Integrated Feeding Systems Coil Line Servo Feeding Units Custom Feeding Automation Solutions 📊 TECHNICAL RANGE Feeding Length: Customized according to production needs Working Width: Customized according to material width Material Thickness: Based on application requirements High feeding accuracy and repeatability Continuous industrial duty operation 🔧 ENGINEERING FEATURES High-performance servo motor driven system Precise feeding length control Fast response and synchronized operation Programmable feeding parameters Multi-job memory capability PLC & HMI control interface User-friendly operation panel Heavy-duty industrial machine structure ⚡ OPERATIONAL ADVANTAGES Improved production accuracy Faster setup and job changeover Reduced material waste Stable and repeatable feeding performance Easy integration with presses and automation lines Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Press feeding lines Punching systems Stamping operations Roll forming pre-feeding systems Automotive suppliers White goods industry General sheet metal processing 🧩 OPTIONAL CONFIGURATIONS Dedpfxjy E Hnrj Aa Nocg Different feeding widths and capacities Custom control software Automation upgrades Press synchronization packages Turnkey integration solutions 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar servo feeder systems successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, videos and technical details can be provided upon request.

Condition: used, Year of construction: 1997, machine/vehicle number: 150069, Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Dcjdpfouqdhwjx Aa Njg Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton Standard configuration electrical overload protectionpneumatic clutch2 connecting rodsPLC Siemens S5 Extended machine accessories Strip shear AI 40max. shear force 10tSheet thickness max. 4 mmSheet width max. 400 mmCross section 600 mm2 Automation Kaiser Feeder KWV 400max. sheet width 400 mm

Condition: excellent (used), C-Frame Press, Electric Press, Servo Press, Electric Press Tox Ecoline CMB008.407.A.001, Tox Ecoline CMB008.407.A.001, Used Machine Manufacturer: Tox Model: CMB008.407.A.001 (Ecoline) Year: 2011 Weight: 900 kg Overall Dimensions: 1250 x 1400 x 2610 mm Pressure: 5500 kg Stroke: 300 mm Max Speed: 200 mm/s We are offering a high-quality servo press that is the ideal solution for all precision and high-performance industrial tasks. This press provides exceptional advantages in both productivity and quality, making it the perfect choice if you are looking for a reliable, energy-efficient, and cost-effective solution. High Precision: The servo press ensures precise control, allowing for repeatable and accurate operation, with tolerances down to micrometers. Energy Efficiency: It consumes significantly less energy compared to traditional hydraulic presses, enabling more cost-effective long-term operation. Quiet Operation: Operates with low noise levels, creating a more pleasant working environment. Flexible Application: Versatile use across various industries, from automotive to fine mechanics. Programmable motion profiles allow for quick and easy reconfiguration for different tasks. Dsdpfxjuccicj Aa Necg Maintenance-Friendly: Minimal maintenance requirements, a reliable, long-lasting machine that leads to less downtime.

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Dcedpsy Ehnasfx Aa Neg Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Power supply: 380V Flexible temperature control. Dcjdpsy Ehm Njfx Aa Nsg

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Dcedpfx Aey Ehmpea Nog Book press with groove cutter. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Power supply: 380V + compressed air.

Condition: used, Year of construction: 1962, pressure 060 t throat 220 mm stroke 6 - 94 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 340 mm table surface area 680 x 400 mm hole in the table 120 x 70 mm table height over floor 750 mm passage to the back 290 mm ram surface 240 x 240 mm Dedpsyq Sl Sofx Aa Necg ram adjustment 57 mm power requirement 3,7 kW weight 2,8 t dimensions (WxDxH) 1,5 x 1,5 x 2,2 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: good (used), Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Dodpfx Aasy Nkuws Necg Weight kg 5500

Condition: used, Year of construction: 1985, pressure 6,3 t Dsdpoyfwvlofx Aa Njcg stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,8 x 1,3 x 2,4 m with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation as is where is, WITHOUT additional work, free loaded to truck

Condition: ready for operation (used), Year of construction: 1985, Bobst SP 102 CER - Perfect condition available immediately Year 1985 Max.Size: 1020x720 mm Min.Size: 400x350 mm Dodpfjwathhjx Aa Nscg Max.Speed: 8000 Sh/h Max. Cutting force: 250T Paper: min. 80 gr/qm Cardboard: max. 2000 gr/qm Centerline Feeder Non-Stop Autom. Non-Stop with Sheet inserter Side guide Quick Lock system

Condition: ready for operation (used), Fully Automatic Flatbed Die-Cutter, Dcedpfowly D Hex Aa Neg Non-Stop Feeder, Automatic Vacuum Plate, Double Sheet Cleaning Station, Turn Die Cutting Frame, (Batch Delivery) Non-Stop Delivery With Belt, Cutting Force 300 TON, Up to 4.500 Speed/H, Working With Corrugated Cardboard Of Thickness Max. 9mm, Min. 0,9mm, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories Bobst SPO 1575 EG 1980, fully rebuilted 2015, chain changed 2024.

Condition: excellent (used), Year of construction: 1992, Arpeco Impressionist 420mm web width unwind with roll lift and pneumatic 3” mandrel Dedjrrvzrepfx Aa Nscg splice table web guide Sherman corona treater 7 x print units 7 x double UV dryers 7 x chill rolls all UV lamps are BRAND NEW ! 1 x 9.5kW chiller IR dryer Hot Air end of press double size chill roll 2 x rewind mandrels pneumatic 3” many print cylinders and anilox rollers

Condition: excellent (used), Year of construction: 2004, Gallus EMS 410, 2004 Unwind unit E L electronic web guide Dcsdev E Rizspfx Aa Neg Arcotec Corona Treatment unit 7 servo-driven flexo print stations 7 IST UV dryers 7 servo-driven water-cooled chill rolls rail system delam/relam rotary die station with K&B Gapmaster Matrix rewind Magnetic die crane und hoist BST video control Sensotec automatic register control Exit die with nip Rewind touch screen control panel 21 anilox rollers 9 magnetic cylinders 84 print sleeves Tooling: 12x7 Printing cylinders: 89; 96; 102; 104; 106; 108; 116; 117; 121; 168; 9x Magnetic Cylinders: 89; 96; 102; 104; 108; 112; 116; 117; 120. 1x rubber roller for varnishing. 21x Anilox rollers Good working condition In production, can be inspected at any time

Condition: ready for operation (used), Year of construction: 1984, Heidelberg SM 102 Z Straight machine Powder sprayer Dsdpfx Aaexqv Ayj Nscg Year: 1984 Max format: 72 x 102 cm Conventional dampening Under Power Available immediately

Condition: ready for operation (used), Year of construction: 1999, operating hours: 45 h, Man-Roland 204 E OB age 1999 Only 45 Mio RCI 2 - remote controlled inking Rolandmatic continuous dampening Easy plate Blanket washing device - automatic Stream feeder, Powder sprayer Antistatic feeder Technical Data: Dcsdpfx Aewarb Hja Nog Maximum sheet size: 52 x 74 cm (20.5 x 29.1 inches) Minimum sheet size: 26 x 40 cm (10.2 x 15.7 inches) Maximum printing area: 51 x 72 cm (20.1 x 28.3 inches) Maximum printing speed: Up to 13,000 sheets per hour Plate size: 605 x 745 mm (23.8 x 29.3 inches) Substrate compatibility: Paper, cardboard, light packaging materials Number of colors: Available in two-color configuration Power requirements: 400V, 50Hz, 42 kW Machine weight: Approximately 13,000 kg (28,660 lbs)

Year of construction: 2016, condition: ready for operation (used), This SCHMIDT Electric Press 343 was manufactured in 2016. It features a stroke of 100 mm, tool dimensions of 150 x 100 mm, and a maximum speed of 150 mm/s. The press force monitoring and two-hand operation ensure safety and precision. Ideal for tasks requiring up to 2.5 kN pressing force with a maximum of 4 kN. The machine is in very good condition, almost like new. Contact us for more information about this machine. Additional information • Condition: Very good, almost like new • Features: Dsdpfxox D Ncao Aa Nocg • Press force monitoring • Two-hand operation • Electronic rack and pinion drive • Sensors for force and displacement measurement • Press force: 0.5 tons, 2.5 kN at 100% duty cycle, 4 kN max • Stroke: 100 mm • Max speed: 150 mm/s • Tool dimensions: 150 x 100 mm • Pam stroke: 0-100 mm • Pam speed: 200 mm/s max • Working height: 1080 mm • The machine operates reliably via safe two-hand control and has only been used for testing purposes.

Year of construction: 2023, condition: used, Used machine Year of manufacture: 2023 Equipment and technical data: - Machine frame: robust, torsion-resistant steel construction Dodjyf R Alopfx Aa Necg - Membrane frame: opening/closing with gas pressure cylinders - Swivel castors: removable, 360° rotatable - Vacuum pressing pressure: 0.85 kg/cm² (8.5 t/m²) - Vacuum table: 3.68 m²; 31.28 t - Membrane: natural rubber 3100 x 1500 mm - Usable area: 2920 x 1320 mm - Material thickness: 2 mm - Colour: grey - Material hardness: 53 Shore A - Tear strength: 26 MPa - Elongation at break: 690% - Temperature resistance: up to +130°C - Pressing area: 2920 x 1320 mm - Power requirement: 1.25 kW Options: - Membrane quick-change system - 200 l tank with digital pressure control, operating modes: automatic and manual - Additional vacuum outlet for further applications: vacuum bag, vacuum clamps - Becker pump 40 m³/h Dimensions: 3200 x 1400 x 1000 mm Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series Dcedpfx Aaoyrhyue Nsg with material support table no. 513, dimensions 630 x 535 mm

Condition: good (used), Year of construction: 2016, operating hours: 1,060 h, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Year: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: triple, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The baler is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or YouTube channel. The hydraulic hoses should be replaced. Dodpfsy Ni Shjx Aa Necg If you have any questions about the machine, we are also happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any possible errors. The offer is subject to change, prior sale, and withdrawal at any time. Viewings are possible by appointment. Sale is ex-works, subject to prior payment, without warranty or guarantee.