Used Sleeve for sale (847)

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 125 mm, 27 pieces -Sizes: Ø 0.7 - 17 mm, see photos / parts list -Price/Fee: complete Bdjdjyzyiujpfx Abtjg -Transport dimensions: 195/180/H130 mm -Weight: 4.7 kg

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. Bedpfszfyu Aex Abtjdg The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, number of axes: 3, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 Bsdpfsyffgrex Abtjdg • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 1996, general overhaul in 2005 Number of spindles: 2 Drilling capacity/spindle, steel: 1-6 mm Drilling depth: max. 350 mm Z-axis travel: 350 mm X-axis travel: 350 mm Drive power/spindle: - 100% duty cycle 3.7 kW - 50% duty cycle 5.5 kW Spindle speed: 3,000 - 27,000 1/min Spindle mounting: Ø 10 - 60 mm Coolant pressure: max. 150 bar Bjdpjy Eykgjfx Abtodg Coolant flow: 48 l/min Coolant volume: 1,000 l Compact band filter High-pressure pump Accessories included: - 29 drilling sleeves - Drilling sleeve holder - Taper chucks - Tapers - Drill chucks Optional accessories - € 5,500 - 137 drills - List available in PDF

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Ø23 x 33 mm, 81 pieces Sizes: Ø 4/5/6/8/10/12 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 555/205/H190 mm Bodpfx Aeyknlhsbtjdg -Weight: 15.2 kg

Condition: used, Year of construction: 2015, Special feature: Higher splash guards and splash protection under the linear guide 4 pieces of grinding wheel holders Bedpjzwm Erefx Abtjdg Sleeve with partial disc Shaft 30 mm PLUS: Grinding spindle 40 mm

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Bjdjzxdqzepfx Abtodg Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: good (used), clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 80 mm, 23 pieces -Sizes: Ø 8 - 40 mm, see photos -Price/Delivery: complete -Transport dimensions: 360/260/H80 mm -Weight: 19.2 kg Bjdpfeu T Tpnsx Abtedg

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MZWP01, Equipment: CE marking, Automatic shrink sleeve labeling machine, this series of equipment is a fully automatic intelligent packaging line that integrates bottle feeding, bottle sorting, labeling, and shrink label functions. The design spirit of this equipment is true high speed, precise positioning, streamlined manpower, and perfect packaging. It is suitable for beverage and health food factories and has the functions of beauty, easy cleaning, and maintenance. The new steam shrinkage tunnel greatly improves the thermal shrinkage efficiency. It is easy to adjust and maintain for different and irregular bottle shapes such as round bottles, square bottles, and flat bottles, with smooth shrinkage. The steam spraying method adopts a separate steam drum design, and the pipeline is smooth and does not occupy space. The spraying outlet is divided into three sections on each side, and the height, front and back, and gas output of each section can be adjusted separately to achieve the most perfect shrinkage effect. Bdedpfx Aoxum Tqebtjg

Condition: used, functionality: fully functional, Radial Drilling Machine WRA 40 x 1250 – used For sale: radial drilling machine WRA 40 x 1250 in good working condition. The machine is fully functional, connected to power and available for inspection under power. 🔧 Condition used (not overhauled) fully operational ready for testing inspection possible Bdedpfoyy Rcpox Abtog ⚙️ Technical data Drilling capacity steel/cast iron: 40 / 50 mm Arm reach: 250 – 1220 mm Spindle distance: 380 – 1580 mm Spindle stroke: 355 mm Spindle taper: MT4 Speed range: 20 – 2500 rpm Number of speeds: 15 Feed range: 0.063 – 2.5 mm/rev Motor power: 4 kW Machine weight: approx. 3600 kg 🧰 Equipment coolant system 24V lighting drilling table Morse sleeves tools and documentation 📦 Terms price: on request location: Poland loading possible transport can be arranged

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Bdjdpfx Aovv Uy Sjbtog -Clamping sleeves: Length 85 mm, 79 pieces -Sizes: Ø 1 - 20 mm, see photos -Price/Sale: complete -Dimensions: 310/200/H150 mm -Weight: 13 kg

Year of construction: 2021, condition: excellent (used), Insert nut (insert sleeve) machine, Stafast HFM-CF. The machine is configured for M8 nuts with a large flange. The machine is in very good condition. Bdsdjy Ui Tijpfx Abteg Ready for use.

Condition: used, Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 800 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 382 mm, travel distance Y-axis: 65 mm, travel distance Z-axis: 2,100 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 20 rpm, torque: 2,200 Nm, overall weight: 12,800 kg, CNC FANUC 180i with 3D software WORK AREA: Maximum turning diameter: 800 mm Turning diameter above the cross slide: 500 mm X-axis travel: 382 mm Bodpszuy H Djfx Abtjdg Y-axis travel: ± 65 mm Z-axis travel: 2,100 mm MAIN ELECTRIC SPINDLE: Spindle housing: 300 mm high, 5 mm Bar capacity: 121 mm Power (40/100% ED): 43/33 kW Torque (40/100% ED): 2,200/1,700 Nm Rotation speed: 20 - 2,500 rpm AXIS FEED RATES: Rapid traverse speed X/Z: 60/35 m/min TOOL TURRET: Number of tool stations: 12+6 Number of powered tools: 12 Tool holder according to DIN 69880: 50 mm Power (40% ED): 15.7 kW Torque (40% ED): 50 Nm Rotation speed: 3,500 rpm Maximum clamping collet diameter: 26 mm TAILSTOCK: Sleeve travel: 150 mm Center mounting: CM 5 Maximum sleeve thrust: 1,800 daN Machine weight: 12,800 kg Machine complete with: -Steady rest -Set of fixed and powered tool holders -Operating manuals and CE declaration Year of manufacture: 2005

Condition: used, Cut-to-length and separating machine Manufacturer: Pfister AG Type: DUOSCHLIFF 2200 Year of manufacture: 1995 Max. workpiece length: 500 mm For the production of: - Cylindrical ejector pins with a stepped design - Flat ejectors - Profile and hole punches Bdedpezxrwpefx Abtsg - Ejector sleeves

Condition: used, ESTEVE double interior silo unit 2 independent storage cells Capacity 2 x 1,500 kg, totaling 3,000 kg Dry bulk product, likely flour Dimensions: 5300 x 2580 x 2630 mm Electrical supply: 380 V Common support frame for both silos Two metal silo bodies 1 - Filling: connection and piping Ø 80 mm Cell feeding via filling circuit 2 - Storage: 2 cells of 1,500 kg Separation of 2 batches or compatible products Graduated level indicators on both cells Front inspection ports 3 - Discharging: hoppers at the bottom Bdodpfx Aszx Thcsbteg Product directed towards the extraction system 4 - Extraction: mechanical system with rollers Product extraction at the outlet of the cells 5 - Screening: integrated sifter Sifter motor 0.75 kW according to installation sheet 6 - Transfer: pneumatic system RBL 10 Transfer motor 3 kW according to installation sheet Piping circuit of approximately 25 m Distribution piping included 7 - Filtration: textile filter sleeves Motors installed at the bottom Integrated storage, extraction, screening, and transfer Brand: ESTEVE, now integrated into Shick Esteve The ESTEVE JE 2500 double interior silo unit is a professional, used equipment designed for storing dry bulk ingredients. It includes two independent 1,500 kg cells each, for a total capacity of 3,000 kg. The identified use is likely related to flour or compatible powdered dry products. The unit combines storage, mechanical extraction, screening, filtration, and pneumatic transfer in a single installation powered by 380 V. Why this model stands out The JE 2500 is not limited to storage; it brings together several functions necessary for handling a bulk ingredient. Its two cells allow for the separation of two batches or two compatible products, while extraction via rollers ensures the mechanical removal of the product. The integrated sifter and RBL 10 pneumatic transfer system complete the installation for organizing its flow. This configuration is particularly advantageous when a project requires a professional interior flour silo with several pieces of equipment already grouped on the same frame. Key advantages Two independent 1,500 kg cells Total storage capacity of 3,000 kg Mechanical extraction via rollers Pneumatic transfer system type RBL 10 Sifter integrated into the unit Filtration with textile sleeves Filling via Ø 80 mm connection Front inspection ports Graduated level indicators on both cells Unit installed on a common support frame

Condition: good (used), clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 70 mm, 17 pieces -Sizes: Ø 10 - 40 mm, see photos -Price/Delivery: complete -Transport dimensions: 300/170/H70 mm Bsdpeu Uwwljfx Abtsdg -Weight: 9.3 kg

Condition: used, clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Clamping sleeves: length 80 mm, 5 pieces Bjdpfxsu S Tbzs Abtedg -Sizes: Ø 15/16/20/25/30 mm -Price/Delivery: complete -Transport dimensions: 140/90/H80 mm -Weight: 1.8 kg

Year of construction: 2007, condition: used, Europack Compact RTSW 2007, automatic sleeve wrapper, powered belt infeed, variable belt speed, adjustable tunnel & sealing temperature, teflon coated sealing jaw, aperture 350mm x 200mm, 3Ph Bdodpfsdbqxzex Abtog

Condition: used, Flange connection, V-flange, Sleeves, double nipples -Sleeves/double nipples: 1 to 3" 183 pieces Bodpeq N E Risfx Abtedg -Type: 20 different versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H350 mm -Weight: 183 kg

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 3,000 mm, overall weight: 22,000 kg, spindle speed (max.): 16,000 rpm, tool weight: 8,000 g, This 3-axis SAMAG MFZ 2-2 was manufactured in 2007, featuring a line voltage of 400V, frequency of 50 Hz, and a control voltage of DC 24 V. With a power consumption of 72kW and a weight of 700kg, it includes optional 3D data of the clamping tower. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information about this machine. • Tool storage • Type: Decagon • Number of storage locations: 100 (2x50) • Number of cassettes: 10 • Cassette locations: 10 • Cassette pitch: 90 mm • Max. cassette magazine speed: 8.3 min • Delay time from max. cassette magazine speed to standstill: 300 ms • Max. tool load mass: 280 kg • Max. tool weight/plastic collet: 6 kg • Max. tool weight/steel collet: 8 kg • Max. tool diameter with free adjacent locations: 160 mm • Rotation axis: 10x36 • Time to change from nearest cassette (left/right): 1.5 s • Tool change on spindle, average chip-to-chip (VDI 2852), without wheel rotation: 4.5 s • Axes and travel paths • Travel paths • Y-axis (vertical) working stroke: 500 mm • Y-axis (vertical) total stroke incl. tool change: 775 mm • Axis acceleration X/Y: 0.6 xg / 0.8 xg • Main spindle drive • Spindle unit: GMN high-frequency spindle HCS 220-16000/28 • Spindle spacing: 450 mm • Sleeve diameter: 220 mm • Weight: 110 kg • Drive motor: 1FE1 083-4WN11-1BA2 • Torque (S1): 65 Nm • Torque (S2): 74 Nm • Workpiece carrier unit • W-axis swivel unit • Swivel time 180°: 4.5 s • Faceplate/counterbearing diameter: 500/345 mm • Drive/counterbearing speed (max.): 15/20 min • Mass moment of inertia: 140 kgm² • Permissible tilting moment: 8,000 Nm • Permissible tangential moment of drive/counterbearing: 10,000/5,000 Nm • Locking force of Hirth gearing at 100 bar/counterbearing: 190/175 kN • Workpiece holder A1/A2 axis • Parting angle: 3 • Swivel time 180°: 3.5 s • Faceplate/counterbearing diameter: 345 mm • Speed (max.): 20 min • Mass moment of inertia: 20 kgm • Permissible tilting moment: 3,000 Nm • Permissible tangential torque drive/counterbearing: 5,000 Nm • Line voltage: 400 V • Frequency: 50 Hz • Control voltage: DC 24 V Additional equipment • Cooling lubricant system (scraper belt conveyor) • Dimensions (L x W x H): 2885 x 1095 x 1830 mm • Discharge height: 1020 mm • Gap screen: 500 μm • Filling volume: 100 l • Wastewater pump: 380 l/min at 1.6 bar • Central cooling unit • Type: DK 160-V/SO • Cooling capacity: 1900 W Bdjdpfozvvnmox Abtog • Min./Max. ambient temperature: 10/40 °C • Max. water outlet temperature: 20 °C • Condensation temperature: 40 °C • Refrigerant: R134a, 2 kg • Connected electrical power: 5.1 kW • Clean water tank (empty): 930 kg • Chip conveyor (empty): 450 kg Dimensions Machine Depth 5500 mm

Condition: good (used), Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves Bdjdpeztwgljfx Abteg -Tool holder: Adjusting sleeves Ø28 mm 9 pieces -Recording: 5x MK2 / 4x MK1 -Submission/Price: complete -Transport dimensions: 200/90/H120 mm -Total weight: 3.6 kg

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 3,000 mm, overall weight: 22,000 kg, spindle speed (max.): 16,000 rpm, tool weight: 8,000 g, This SAMAG MFZ 2-2 was manufactured in 2006. A robust horizontal machining centre, it features a power rating of 72 kW and operates on a 400V mains voltage with a 50 Hz frequency. Weighing 700 kg, it includes optional 3D data for clamping towers and spare parts. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information. • Tool storage • Type: Decagon • Number of storage locations: 100 (2x50) • Number of cassettes: 10 • Cassette locations: 10 • Cassette pitch: 90 mm • Max. cassette magazine speed: 8.3 min • Delay time from max. cassette magazine speed to standstill: 300 ms • Max. tool load mass: 280 kg • Max. tool weight (plastic collet): 6 kg • Max. tool weight (steel collet): 8 kg • Max. tool diameter with free adjacent locations: 160 mm • Rotation axis: 10x36 • Time to change from the nearest cassette (left/right): 1.5 s • Tool change on the spindle (avg. chip-to-chip without wheel rotation, VDI 2852): 4.5 s • Axes and travel paths • Travel paths: Y (vertical) working stroke 500 mm; Y (vertical) total stroke incl. tool change 775 mm • Axis acceleration (X/Y): 0.6 xg, 0.8 xg • Main spindle drive • Spindle unit: GMN high-frequency spindle HCS 220-16000/28 • Spindle spacing: 450 mm • Sleeve diameter: 220 mm • Spindle unit weight: 110 kg • Drive motor: 1FE1 083-4WN11-1BA2 • Torque (S1): 65 Nm • Torque (S2): 74 Nm • Workpiece carrier unit (W-axis swivel unit) • Swivel time 180°: 4.5 s • Faceplate/counterbearing diameter: 500/345 mm • Drive/counterbearing speed (max.): 15/20 min • Mass moment of inertia: 140 kgm² • Permissible tilting moment: 8000 Nm • Permissible tangential moment (drive/counterbearing): 10,000/5,000 Nm • Locking force of Hirth gearing at 100 bar (drive/counterbearing): 190/175 kN • Workpiece holder A1/A2 axis • Parting angle: 3 • Swivel time 180°: 3.5 s • Faceplate/counterbearing diameter: 345 mm • Speed (max.): 20 min • Mass moment of inertia: 20 kgm • Permissible tilting moment: 3,000 Nm • Permissible tangential torque (drive/counterbearing): 5,000 Nm • Mains voltage: 400 V • Frequency: 50 Hz • Control voltage: DC 24 V • Power rating: 72 kW Additional equipment • Cooling lubricant system (chip management) • Type: Scraper belt conveyor • Dimensions (L x W x H): 2885 x 1095 x 1830 mm • Discharge height: 1020 mm • Gap screen: 500 μm Bdedozvvntopfx Abteg • Filling volume: 100 l • Wastewater pump: 380 l/min at 1.6 bar • Central cooling unit • Type: DK 160-V/SO • Cooling capacity: 1900 W • Min./Max. ambient temperature: 10/40 °C • Max. water outlet temperature: 20 °C • Condensation temperature: 40 °C • Refrigerant: R134a, 2 kg • Connected electrical power: 5.1 kW • Peripheral masses • Mass of clean water tank (empty): 930 kg • Mass of chip conveyor (empty): 450 kg • One slaughter machine (optional) • 3D data/CAD of the clamping tower (possibility for 3 clampings) (optional) • 2 replacement towers and spare parts package (optional) Dimensions Machine Depth 5500 mm

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: WP - Flight circle (ø): 150 mm - Bore: 40 mm - Marking: MAN - Length: 8–15 mm - Material: Steel Bdodpezryn Nefx Abtsg

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutter head drive motor: 22kW - Smooth feed rate adjustment + forward/reverse via inverter - Feed motor: 1.5kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-cutter head - 6 smooth draw rollers - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES Bjdpfx Aezrui Ijbtsdg - Manufactured by the Polish brand SAFO - DTR+CE documentation - Includes sleeves - Used chamfering machine, very good condition Net price: 98900 PLN Net price: 23548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Bsdpfxjyx I Awe Abtsdg Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h