Used Slitting Mashine for sale (227)

Condition: new, Year of construction: 2024, functionality: fully functional, -Yaskawa GP50 robot with YRC1000 Controller -Laserline LDF6000-60 power unit; •Maximum continuous wave power output 6000W • Emitted light wavelength range 900-1070nm • Air to water with 6kW cooling capacity cooling with the help of cooler • 600μm in diameter and 20m in length optical fiber Godsrwwzyepfx Aabjuh • Annular slit laser coating nozzle water-cooled working optics OTZ-5 • COAX-8 type. The optics specified has a zoom mechanism. • Focus point from 2.28 mm to 7.32 Allows continuous change to mm • CMOS attached to optics for process monitoring camera • Water-cooled side panel that can be installed on OTZ-5 coating nozzle -PF2/2 Power Feeder; •Electronic control • Remote control with robot controller • 2 chambers with a capacity of 5 liters • Heater -Slider; • For Y-axis movement of the robot group Provides linear movement suitable for the process. • 1x Yaskawa Servo Motor, • 1 x Linear (6m), Rack and Pinion • Automatically by the carrier robot will be checked -Two Axis Positioner; • Max. 5,000 kg carrying capacity, • Rotation Axis Servo with Yaskawa Robot and Synchronous motion, • Tilt Axis Servo Motor index control • Movement Range of Tilt Axis +/- 90°, • Rotation Axis Movement Range +/-360° • Max. Product diameter 800mmand max. Product weight is 8 tons. • Positioner as single axis support and hydraulic tailstock when used with carrying capacity max. 8 tone • Positioner can be used as two axes If desired, the carrying capacity is max. 3 is the tone -5T Tailstock; • Max. 5,000 kg carrying capacity • Hydraulic -Two Axis Positioner 5T Support; • 4 m long for cylinder supports a rail base • 1 5 ton roller support • Different sizes from 200 mm to 800 mm Suitable and adjustable for diameters. • Maximum Load 5,000 kg

Year of construction: 2023, condition: new, We offer brand new roll former automatic line for corrugated metal sheet production. Depends on customer preferences we can produce line for 10, 20, 35, 44 or 57mm profile high. Some of lines we have ready on stock. Line is equipped with electric uncoiler up to 10t coils, roll forming part, cutting shear, sheet stacker for 10m length. Also we produce customized roll forming lines, metal tile lines, cut-to-length lines, slitting lines etc. Gujdpfxekhaadj Aabeh To get more information about our machinery please contact our sales department

Condition: used, For sale in excellent condition, Kramer SBMM 70 edging machine, slitting machine, roller Manufacturer: Kramer type: SBMM 70 max. plate thickness: 1.75 Cylinder center distance: 70 mm Maximum working depth: 280 mm Drive power: 1.1 kW Gsdpfoufyw Nex Aabeuh Operating speed: 4.5/9 meters/minute constant. Operating speed with stepless drive: 2.5-21 mm Shaft diameter: 28mm Weight: 190 kg

Year of construction: 1999, condition: excellent (used), Citizen M20-C CNC Swiss type lathe Technical Data Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gusdpfx Asktfiaoaboh Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Tool Holder: Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: L36/150, product height (max.): 25,000 mm, input voltage: 380 V, L36/150/TC/CE Years: 2023 Flexografic Printing Press 3 colours - 150 mm. width -Automatic twin turret re-winders rotating at the pre-selected tape roll length. - The operator will cut the tape, discharge the printed rolls and load the empty -380V. 50Hz 3phase Cast Iron Support Frame MACHINE DESCRIPTION 3" i.d. frictioned un-winder for tape Noise reducer & Low Tape alarm pressure roller Corona Treatment unit Gsdpfx Aajwq Ay Ijbouh - Corona Treatment proportionally adjusted on the tape speed - Ventilation & Suction system for Corona Treatment - Primer Station before printing for tape printing preparing - Ventilation & Suction system for Primer Station 3 Printing Stations complete with metal screened rollers and printing cylinders with gears for 150,7 mm print repeat -Release Station after printing - Ventilation & Suction system for Release Station -Pressure roller for Release Station - Slitting station with razor blades on the adhesive size - Twin furrets re-winders with 2 mandrels for 3" i.d. cores - Pneumatic pump for automatic Primer and Release feeding - 9 additional different cliché cylinders with gears 3 x 260 3 x 280 3x Z100 - Cliché mounting device - Set of spacers for slitting blade holders setting - 152 mm rubber roller for full coating - 50 mm. paper tab dispenser + 30.000 paper tabs - Set of spare parts + Bonus Flexo plate Machine (water based) Price: €74.000

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: Gsdpjuhm E Sjfx Aabouh - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: used, Year of construction: 1973, machine/vehicle number: 2007, Short description: - Including splicing table - Machine documentation available Last intended use (Jan. 2024): - Application-based product testing of polyester slitting converter cable assortments - For assessing running characteristics under constant machine settings - 1.9-6.7 dtex - 2x80ktex-2x120ktex - Collection in can - Accessories/spare parts partially available The machine has been dismantled and stored, but can be inspected on site. Collection only in 14727 Premnitz by the buyer, no shipping. If interested, we look forward to your offer. Guedpfx Asw Rlnajabjh Enquiries in writing only, please.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material Gsdpfx Aaouiq Dhsbeuh 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Gjdpoxfl Izsfx Aabouh Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: like new (used), Year of construction: 2015, Reel width: 2000 mm Slitting width 300 – 1700 mm Guedpowvv Hfsfx Aabsh Max unwind diameter: 800 mm Max. rewind diameter: 600 mm Slitting method: Razor Rewind shafts: Dual rewinding shafts Max mechanical speed: 400 m/min AC Servo motor with tension control Web guiding Material types BOPP, PET, PE, laminated film, foil, paper

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1250 SC L 112, cutting speed: 30,000 mm/min, number of straightening rollers: 3, - 5 pairs of slitting knives – fully automatic positioning - Cross-cutting by means of a guillotine shear - Sheet width: 250 – 1250 mm - Sheet thickness, steel: 0.4 – 1.25 mm (400N/mm²) - Sheet thickness, stainless steel: 0.4 – 0.9 mm (550N/mm²) Godpfx Aaoxl U Uwebouh - Sheet thickness, aluminium: 0.5 – 1.50 mm (AlMg3) - Min. strip width: 60 mm / 15 mm from sheet edge - Straightening unit: 3-roll, progressive, 180° swivel - Power supply: 3PH 400–488 V AC/N/PE - Compressed air supply: 25 l/min at 6 bar (short-term) Total run time: Length: 19,415 m Cuts: 6,852 -> Values may slightly change as the machine is still in use.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work, we have one more if you need 2 in your factory, price for two machine could be under negotiate. Gedpsfn N U Hjfx Aabeuh The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Guodpfx Aaeu Tg I Djboh Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Trumpf TruTool C160- 2 Plus electric slitting shear Gujdpeuhm Rbsfx Aaboh Shears very good condition.

Condition: used, Year of construction: 2009, Ref:10924 . 2009 Heidelberg Stahl KH82/4KL-PFH Combination Folder. High performance digital folding machine with computerised auto set-up. Comprising: • PFH82 pallet loading pile feeder designed for medium to high run lengths with low operator strain, laser guided positioning of the stack, double wheel suction head for wide format sheets. Max. pile height 1.2 metres. • Sheet ejection facility with contactless double sheet detection for continuous high- speed running and instant problem detection to minimise paper wastage. • Digital microprocessor control with touch screen display for automatic setting of fold plates & rollers. • DAC total & batch counter with memory • BUH-82 Buckle station • CAH-82 Cross-fold station • Single sound hood covering buckle unit and knives • (2000) SBP66 Presser-stacker delivery unit. Including compressor, tools, spares & manuals. Folding sequence: 4 Parallel plates in the first unit with pre & post slit/score shafts 1st knife at 90° with slitter shaft 2nd knife to the left of first knife. Specification: Sheet size, Max : 82 x 120 cm Min : 14 x 18 cm Fold length, Min : 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Stahl VFZ 52 Knife folding unit. Mobile electronic 32pp knife fold unit. Godpfx Aaovzyzrebjuh Additional Price: EUR 9,000 LOT.

Condition: ready for operation (used), Year of construction: 1996, Immediately available from site: CNC Punching – Nibbling Machine Trumpf Model: TC 500 R SM 1306 Year of manufacture: 1996 Operating hours: 81,000 CNC control: Sinumerik 840 D TrumagraphCC 220 S Working area: 2535 x 1280 mm Punching force: 22 tons Sheet thickness up to 8 mm Workpiece weight up to 150 kg Max. positioning speed (simultaneous X – Y axis): 108 m/min Continuous C-axis rotation: 360 degrees Maximum stroke rate: 900 strokes/min Max. number of tools: 18 Automation components: Standard configuration CheetMaster 1306 Sheet Master Grip Master Cassette with multitool for numbers 0 – 9 Cassette with multitool for diameters 1.0/2.0/3.0/4.0/5.0/6.0 mm Each 1 cassette with thread former M3, M4, M5, M6 Truma Grip Truma Sort L Chip conveyor with container Equipment: Multitool actuation Thread forming function Marking function Slitting function 3 clamps Scratch arm machining Small part sensor with part chute Part blowing device Pneumatic follow-up cylinders Softpunch Memory expansion to 256 KB Vibration-damped installation Supplied tools: Multitool 6-station Multitool 12-station Guedpfexld Tpsx Aaboh Price: €8,000.00 ex site, plus VAT Alternatively, price: €12,000.00 plus VAT, including dismantling, removal, and loading

Year of construction: 2014, condition: used, functionality: fully functional, Type of machine REWER Manufacturing year 2014 Weight 2000 kg Power supply 14 KW Voltage 3x400 V Air pressure 7 bar Rewound material foil: OPP, PET, PVC, OPS, LDPE: 40-50 mkm. cardboard Width of material 500 mm Max. winding diameter 800 mm 1 shaft core 76 Guedpfx Aokw Ufzsaboh Max unwinder diameter 800 mm 1 shaft core 76 Winding speed 0-400 m/min Max weight 400 kg Wind direction right to left or left to right (both side) Lay-on shaft 2 psc. Rewinder and unwinder separate Web guide system with ultrasonic sensor 1 psc. Waste winder with splice table 1 psc. Slitting module rotary knife Control panel touch screen Adapter diameter 152 mm. 2 psc. Stroboscope with tape control sensor

Year of construction: 2004, condition: like new (used), CODIMAG VIVA 340 Year 2004 Semi Rotary Waterless Offset Press Screen | 6 x Offset | Flexo Varnish I HOTFOIL 8 x UV Chiller Max Web Width 340mm Max/Min Repeat Length 150mm/6" up to 305mm/12" GAP-MASTER Unwind Unit Splice Table Web Guide Rotary Screen Unit 6 x Print Units Hot Foil Unit Flexo UV Varnish Unit Technotrans Ink Temp Distribution Unit Full IST UV Drying Semi Rotary Die Station Slitting Unit Waste Matrix Rewind Product RewindMachine are Complete and in very good Condition. Gujdpfxjh S U E Rs Aaboh Available : Immediately in Printingshop

Condition: excellent (used), functionality: fully functional, DGUV certified until: 11/2026, year of last overhaul: 2025, Bread roll machine for square special rolls Model: Quadro Fit incl. 3 slitting rollers Belt mistake for infeed belt LED control, Stainless steel version Machine mobile with lock Connection 400V, 16ACEE plug Used machine is cleaned and workshop checked with 6 months warranty Guedpfxofimgls Aabjh Visit our Milbrandt Qutlet with a sample bakery for bakery machines!

Condition: used, Year of construction: 2002, KAMPF Slitting and Winding Technology Model: Conslit 17 Year of manufacture: 2002 Web width: from 500 to 1750 mm 2x web side guides / 2 edge position control systems Friction and air shafts: 70, 76, 152 mm Gusdpoxgr R Esfx Aabjh

Condition: used, Year of construction: 1975, functionality: fully functional, Paper Cutting and Rewinding Machine – Goebel Robust industrial equipment, manufactured in Germany, specifically designed for slitting and rewinding paper rolls. Delivers high precision in processing large reels and is ideal for preparing material for printing houses, packaging production, and other applications in the paper industry. Its solid construction and proven reliability ensure successful operation even after decades of use. Gusdpfexcxluex Aabeh

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 20051619, Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm *Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Guodpfjhii Swex Aabsh Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 083, Excellent condition/ready to work different model of Ceetec mashines (P40, A250, IP250). Guedpfexc Dtqsx Aabjh

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Gedpfxjwck U Rj Aabsuh Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: used, Year of construction: 1996, Year: 1996 / overhauled in 2008 Technical specifications and equipment: • 8 printing units Material width: 620 mm Printing width: 600 mm Print repeat lengths: 250 – 520 mm Materials processed: • PA: 20 – 60 µm • LDPE: 20 – 150 µm • HDPE, OPP and similar films: 12 – 80 µm, max. 120 µm • Laminated films • Paper: 25 – 120 g/m² Mechanical machine speed: up to 200 m/min (depending on substrate) Main equipment: • Impression cylinder with new nickel-plasma coating • Impression cylinder temperature control unit • Non-stop unwinder with web tension measurement and control, including splice table, roll diameter 600 mm, core ID 76 mm • Nip roller before 1st printing unit • 8 doctor-blade printing stations • Speed assist system • Drive elements from the printing unit to the bridge • Intercolor dryers • Web guiding before printing • Bridge with bridge dryer • Web video inspection system • Edge guiding before rewinding with 3 slitting discs and suction • Non-stop rewinder with pneumatic slitting and web tension measurement and control, roll diameter 600 mm, core ID 76 mm • 8 chamber doctor blades plus 8 additional coated doctor blades • 8 electric pumps, new • 8 ink vessels (10 L each) with hose connections, new • 8 ink catch trays plus 4 extra trays • 1 service trolley for anilox roll and sleeve handling • 1 service trolley for chamber doctor blade and ink tray handling Godpfxoxfvrwj Aabsuh • 8 printing sleeves, new, print length 320 mm, make: Rotec Conductive Blue Light • 8 format gears, new, print length 280 mm • 8 ceramic anilox sleeves, new. Base bodies ordered from Apex. Company Wareg will obtain required sleeve type directly from Apex; only for UniFlex sleeves will Wareg incur the additional costs. • ATEX-compliant • New Siemens S7 control system