Used Slitting Mashine for sale (249)

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, • Model: SIAT L33 150 TC • Machine in very good condition, completely overhauled in 2022. • Machine type: Semi-automatic, three-color flexographic printing press • Color printing: Up to 3 colors • Web width: 150 mm • Printing width: 150 mm • Suitable for: PVC, OPP, Acrylic OPP, cellophane, paper, and reinforced films • Applications: Primarily for printing on self-adhesive tapes • Central impression drum: Heated, with ceramic drums Itsdpfx Aexznwksdwsb • Rewind: Automatic rewind turrets with automatic coupling of printed tape to empty cores • Corona treatment: Yes • Slitting: By razor blades • Drying: 3 hot air drying tunnels • Speed control: Up to 160 m/min, adjustable via inverter • Maximum roll diameter (unwind): 360 mm • Maximum roll diameter (rewind): 300 mm • Unwinder shaft diameter: 3 inches

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Isdpfx Adjvakdzjwstb Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: excellent (used), Year of construction: 1984, Ref:11030 . 1984 Kolbus KS Cloth Cutter For slitting & cross cutting of various materials including calico, linen, gauze, PVC, etc. Equipped with: Ijdpexyim Rjfx Adwetb Double friction rewinder Extended delivery table Specification: Max. width of material: 1400 mm

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Isdpexw Uqvofx Adwotb Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: excellent (used), Year of construction: 2018, Ref: 11032 . 2018 MBO K8-RS.6/SKTL Latest model, 16pp+ High speed combination folding machine Equipped with: FP130 Pallet loading flat pile feeder with ‘Vaculift' and 120 cm pile height. ‘M1 Advanced’ intuitive operator guidance system with adjustable 15.6” touchscreen RAS (remote maintenance software) & sheet tracking Datamanager 4.0 software package for production planning Automatic adjustment of buckle fold combi-plates with deflectors Automatic adjustment of folding rollers Slitter shaft cassette for quick make-ready Sheet stop in the crossfold can be used as waste paper ejector without stopping production Total & batch counter Sound hoods with inspection windows Palamides Alpha 500 Plus presser-stacker delivery Including integral compressors, tools & manuals. Folding configuration: 6 Parallel plates in the first unit with slit/score shafts 1st Knife at 90° with slit/score shaft & single plate fold to side 2nd Knife to the left of the first knife. Specification: Sheet size, Max: 80 x 120 cm Ijdpsxx Uxvsfx Adwstb Min: 15 x 25 cm parallel fold Min: 15 x 20 cm cross fold Min: 20 x 30 cm three fold Sheet thickness: 35 – 250g Mechanical speed : 230m/min

Condition: excellent (used), Year of construction: 2012, Ref:11028 . 2012 Heidelberg Stahl KH82/6KTL-RFH Combination Folder High performance digital folding machine with computerised auto set-up. Comprising: • RFH82 continuous feeder designed for short to high run lengths • Sheet ejection facility with contactless double sheet detection for continuous high- speed running and instant problem detection to minimise paper wastage. • Digital microprocessor control with touch screen display for automatic setting of fold plates & rollers. • DAC total & batch counter with memory • KH-82 Buckle station • Cross-fold station Itodexx Uvnspfx Adwjb • Single sound hood covering buckle unit and knives • SBP 46 Presser-stacker delivery unit. Including compressor, tools, spares & manuals. Folding sequence: 6 Parallel plates in the first unit with pre & post slit/score shafts 1st knife at 90° with slitter shaft 2nd knife to the left of first knife. 3rd knife to the left of second knife Specification: Sheet size, Max : 82 x 120 cm Min : 14 x 18 cm Fold length, Min : 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: L36/150, product height (max.): 25,000 mm, input voltage: 380 V, L36/150/TC/CE Itsdpowq Ay Iefx Adwob Years: 2023 Flexografic Printing Press 3 colours - 150 mm. width -Automatic twin turret re-winders rotating at the pre-selected tape roll length. - The operator will cut the tape, discharge the printed rolls and load the empty -380V. 50Hz 3phase Cast Iron Support Frame MACHINE DESCRIPTION 3" i.d. frictioned un-winder for tape Noise reducer & Low Tape alarm pressure roller Corona Treatment unit - Corona Treatment proportionally adjusted on the tape speed - Ventilation & Suction system for Corona Treatment - Primer Station before printing for tape printing preparing - Ventilation & Suction system for Primer Station 3 Printing Stations complete with metal screened rollers and printing cylinders with gears for 150,7 mm print repeat -Release Station after printing - Ventilation & Suction system for Release Station -Pressure roller for Release Station - Slitting station with razor blades on the adhesive size - Twin furrets re-winders with 2 mandrels for 3" i.d. cores - Pneumatic pump for automatic Primer and Release feeding - 9 additional different cliché cylinders with gears 3 x 260 3 x 280 3x Z100 - Cliché mounting device - Set of spacers for slitting blade holders setting - 152 mm rubber roller for full coating - 50 mm. paper tab dispenser + 30.000 paper tabs - Set of spare parts + Bonus Flexo plate Machine (water based) Price: €74.000

Condition: good (used), You are bidding on: a branded machine from the market leader Schlebach – RBM Round Arch Machine Device features: RBM Ijdjx A H Htepfx Adwstb Data – see photo We have a large selection of folding benches (press brakes) from Schechtl and Schröder in 2m versions with 1.5 mm and 2 mm capacity. Please inquire for offers as a set!!!! If you are interested, please let us know briefly so we can adjust the offer for you! This machine is unique and can be combined in various sets. Optionally, you can find and purchase many more machines and machine accessories such as various rails, depth stops – everything you need for sheet metal and steel processing, including press brakes, guillotine shears, drilling machines, slip rollers, slitting and profiling machines; accessory parts (beading equipment, round rolls for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available for questions. You will receive an invoice according to §25a of the German VAT Act; VAT is included in the invoice amount (differential taxation). Free loading available – total weight approx. 1000 kg Inspection and testing are possible and encouraged by appointment – call 0175 248 1975 Payment in cash upon collection. Take advantage of our experience and expertise. We are happy to advise you at 0175 248 1975. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approximately 3 minutes from the A3 and A81 motorways. Item number: RBM

Condition: used, Year of construction: 1980, sheet width 1000 mm Itodpfxewz Rvxe Adwsb plate thickness 125 mm

Year of construction: 2009, condition: used, Two-colour rotary flexographic printer with integrated slotter and stacker. TECHNICAL DATA: Iodpfx Aehbvq Hsdwotb Year of production: 2009 Factory number: 0904K02 Max speed: 70 pcs/min Economical speed: 50 pcs/min Max. sheet: 3000 x 2000 mm Min. sheet size: 600 x 350 mm Max. print: 2900 x 1900 mm Cardboard thickness: 2-10mm Film thickness: 4-7mm Axial correction: ± 8mm Max slot length: 350mm Slit width: 7mm Main motor: 7.5 KW Total power: 15 kW Overall dimensions: 6000mm x 3050mm x 1900mm Weight: 28000 kg DESCRIPTION: Includes commissioning, technology, training, start-up warranty.

Year of construction: 2023, condition: new, We offer brand new roll former automatic line for corrugated metal sheet production. Depends on customer preferences we can produce line for 10, 20, 35, 44 or 57mm profile high. Some of lines we have ready on stock. Line is equipped with electric uncoiler up to 10t coils, roll forming part, cutting shear, sheet stacker for 10m length. Also we produce customized roll forming lines, metal tile lines, cut-to-length lines, slitting lines etc. Iedpfx Adskhaadowstb To get more information about our machinery please contact our sales department

Condition: used, Year of construction: 2014, TECHNICAL DATA: Type: 5-color digital UV inkjet press with separate white printing unit Length: 4550 mm Width: 1750 mm Height: 2200 mm Weight: 3000 kg Connected load: 39 kW / 60 A Power supply: 400 V, 3-phase, 50 Hz Auxiliary power: 230 V, 50 Hz (chiller) Compressed air consumption: 100 NL/min Required cooling capacity: 18 kW (60,000 BTU/h) Data interfaces: USB 2.0, Ethernet COOLING UNIT (RECOLD RE-C 160 INERT) Cooling capacity: 16,000 W Refrigerant type: R134a Refrigerant charge: 4.5 kg Power consumption: 8.5 kW Max. current: 15 A PRINTING TECHNOLOGY: Process: Piezo DOD Printheads: Xaar 1001 Resolution: 720 × 360 dpi UV DRYING SYSTEM: UV lamps: • 1× Hönle UV GOZ, 7.2 kW • 1× Hönle UV FOZ, 7.2 kW Pinning: LED pinning after print units 1 and 5 Exhaust: Integrated lamp cooling and odor reduction INERT GAS CURING SYSTEM: Type: Oxygen-reduced curing unit Gas consumption: < 6 m³/h WEB AND PRINT PARAMETERS: Process: Roll-to-roll Web width: 350 mm Print width: 330 mm Repeat length: 10–1000 mm Register accuracy: ± 50 µm Print tolerance: • Single distance: ± 0.2 mm • Cumulative per meter: ± 1.5 mm Speed: • 4-color mode: up to 48 m/min • With white ink: up to 30 m/min • Adjustable speed range: 18–48 m/min WEB TREATMENT AND HANDLING: Corona station: 1500 VA Web cleaning: Polymer roller LC 350 Antistatic units: 3 pieces Edge guiding: Before print module Roll diameter (unwind/rewind): max. 610 mm Roll weight (unwind/rewind): max. 120 kg Shafts: Pneumatic expanding shafts, 76 mm core Splice table: Integrated slitting and splicing table SUPPORTED SUBSTRATES: • Coated and uncoated paper • PP, PE, PVC, POPP (white or transparent) • Aluminum foil (coated or uncoated) • PET films • Acrylic coatings • CN-based primers • PET-based primers • Hybrid dispersion primers INK SYSTEM: Ink type: UV-curable, low migration Food & pharma compliance: Indirect contact Free monomers: < 10 ppb Ink laydown: 8.2 g/m² at 100% area coverage Cartridge change: Possible during operation Empty cartridge signal: Optical or acoustic PRINTHEAD MAINTENANCE: Ink recirculation system: Enclosed design Automatic daily cleaning: Suction cleaning before operation Manual cleaning: Lint-free cloth SOFTWARE: • RIP software: Esko Artwork • ICC profile management Ijdoxzrvdspfx Adwstb • Supported data formats: PDF-X1, PDF-X3, EPS, AI • Internal storage for designs • Unlimited substrate recipe storage • Touchscreen operator panel CONTROL AND SAFETY: • UV lamp overheat and operational monitoring • Machine interlock in event of UV system failure • Ink level warning system • Emergency stop

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: K10027, control type: CNC control, degree of automation: semi-automatic, throat depth: 1,000 mm, bending angle (max.): 140 °, Equipment: CE marking, emergency stop, foot remote control, Jorns Long Folding Machine for folding Sheet Metal I have operated this machine from new. It is a very capable and reliable machine made by Jorns of Switzerland who are known to be at the very top of their game. It is capable of folding 1.2mm in steel and 2mm in aluminium. Itjdsx Ilx Iopfx Adwjb The machine has a 1m insertion depth and four backstops which are adjustable. (there is an option to add more, but we never needed to.) The machine also has a slitter installed for slitting sheets along the full length of the machine to desired width. This is all controlled from the CNC. The machine was manufactured in 2010. It has the Jorns CNC50 control system which can be programmed with 100 different programs. The machine is very easy on power as all folding movements are hydraulicly driven. Overall the machine is in extremely good condition and can be seen operating until Mid January. Machine comes with safety light curtains. Machine will be ready for collection middle/end of January. I would prefer buyer to collect but if delivery is necessary, it could be arranged as an extra charge. Machine is approx 8m long x 2m wide and weighs approx 7 Tonne. New Jorns machine forces sale.

Condition: new, Year of construction: 2024, functionality: fully functional, -Yaskawa GP50 robot with YRC1000 Controller -Laserline LDF6000-60 power unit; •Maximum continuous wave power output 6000W • Emitted light wavelength range 900-1070nm • Air to water with 6kW cooling capacity cooling with the help of cooler • 600μm in diameter and 20m in length optical fiber • Annular slit laser coating nozzle water-cooled working optics OTZ-5 • COAX-8 type. The optics specified has a zoom mechanism. • Focus point from 2.28 mm to 7.32 Allows continuous change to mm • CMOS attached to optics for process monitoring camera • Water-cooled side panel that can be installed on OTZ-5 coating nozzle Itodporwwzyofx Adweb -PF2/2 Power Feeder; •Electronic control • Remote control with robot controller • 2 chambers with a capacity of 5 liters • Heater -Slider; • For Y-axis movement of the robot group Provides linear movement suitable for the process. • 1x Yaskawa Servo Motor, • 1 x Linear (6m), Rack and Pinion • Automatically by the carrier robot will be checked -Two Axis Positioner; • Max. 5,000 kg carrying capacity, • Rotation Axis Servo with Yaskawa Robot and Synchronous motion, • Tilt Axis Servo Motor index control • Movement Range of Tilt Axis +/- 90°, • Rotation Axis Movement Range +/-360° • Max. Product diameter 800mmand max. Product weight is 8 tons. • Positioner as single axis support and hydraulic tailstock when used with carrying capacity max. 8 tone • Positioner can be used as two axes If desired, the carrying capacity is max. 3 is the tone -5T Tailstock; • Max. 5,000 kg carrying capacity • Hydraulic -Two Axis Positioner 5T Support; • 4 m long for cylinder supports a rail base • 1 5 ton roller support • Different sizes from 200 mm to 800 mm Suitable and adjustable for diameters. • Maximum Load 5,000 kg

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Itodpfx Adexcal Aewjb

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Iedoxcalcopfx Adwetb The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work, we have one more if you need 2 in your factory, price for two machine could be under negotiate. Itodefn N U Hspfx Adwsb The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. We make sliding clip formers for 25, 27 or 39mm clip highs For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Maximum metal thickness you can work with -1mm. Itedpfx Aeqxalxsdwob To get more information about sliding clip former we produce please contact our sales department.

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Itjdpfx Adsm Twnlewsb Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: used, Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Mechanical decoiler max. 1000kg Coil inner diameter 400/508mm Straightening machine with 9 straightening rollers and 2 feed rollers and film unwinder The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private customers! Itsdpfovk D Aljx Adwsb

Condition: good (used), Year of construction: 2004, functionality: fully functional, + Version VARN KOMPAC film dampening unit Itodpfoxy N Dcox Adwob Laser slit ink knife Powder sprayer approx. 94 million impressions

Year of construction: 1996, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Iedpjxxzizefx Adwstb

Condition: new, Year of construction: 2024, COIL PROCESSING MANUFACTURER IN TURKIYE. Our cut-to-length line Our roll cutting lines that you need for cut-to-length sheets with a sheet width of 200 mm -2000 mm and a roll weight of 6,000 kg to 30,000 kg. Iodpsh E Sh Hsfx Adwstb Until recently, the iron and steel enterprises were producing sheet metal, since the coil sheet opening systems were not sufficiently developed. The developments in the coil sheet opening sector in recent years have led iron and steel businesses to produce coiled sheets. As a result of these changes in sheet metal production, the demand for coil sheet slitting and cut-to-length lines has started to increase and businesses have started to prefer the way of plating their own products. This situation also eliminates the cost of plate sheet stocking. At this stage, BOSPORAS offers solutions from A to Z, including cutting-to-length systems, uncoiling, straightening, feeding, guillotine shearing, conveyor and stacking of coiled sheets. The most distinctive feature of our Cut-to-Length Line is the cutting feature with the Rotary or Fly Guillotine shear system. It is a professional straightening thanks to the high quality and powerful Leveler Machine. And Cut to Length Line offers the possibility of automatic stacking of the materials. This is provided by the leveler cassette system.Suitable for all sheet material types from 0.3 mm to 10 mm. General features of the systems; Easy operation and maintenance with high level of automation Easy roll loading thanks to hydraulic uncoiler with loading trolley Maximum surface smoothness thanks to multiple straightening rollers Protecting sensitive surfaces with high quality rollers and carriers Burr-free and high-quality cutting automatic stacking system Compact design that takes up little space compared to its capacity Low cost, high quality, maximum efficiency

Condition: like new (used), Year of construction: 2025, coil weight: 30,000 kg, number of straightening rollers: 9, conveyor belt width: 2,000 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness steel (max.): 10 mm, sheet thickness copper (max.): 20 mm, inner diameter: 508 mm, sheet thickness (max.): 10 mm, sheet thickness brass (max.): 20 mm, product height (max.): 10 mm, outer diameter: 2,000 mm, roller diameter: 156 mm, coil width: 2,000 mm, coil outer diameter: 2,000 mm, cutting length (max.): 6,000 mm, working width: 2,000 mm, stack height: 400 mm, Coil Cut to Length Line with Stacking ( 2 - 10 mm x 2000 mm x 30 Ton) TFS Coils, Tin Plate, Galvanized, Stainless Steel, CR, HR, Brass, and Copper to be Cut to the length Teneke Sac, Aluminyum, Galvanizli Sac, Paslanmaz Çelik, HRP, DKP. Hydraulic Expansion Motorized Decoiler with Transmission Box Hydraulic Coil Car Servo Feeder Hydraulic Shear Automated Stacker COIL PROCESSING MANUFACTURER IN TURKIYE. Our cut-to-length line Our roll cutting lines that you need for cut-to-length sheets with a sheet width of 200 mm -2000 mm and a roll weight of 6,000 kg to 30,000 kg. Until recently, the iron and steel enterprises were producing sheet metal, since the coil sheet opening systems were not sufficiently developed. The developments in the coil sheet opening sector in recent years have led iron and steel businesses to produce coiled sheets. As a result of these changes in sheet metal production, the demand for coil sheet slitting and cut-to-length lines has started to increase and businesses have started to prefer the way of plating their own products. This situation also eliminates the cost of plate sheet stocking. At this stage, BOSPORAS offers solutions from A to Z, including cutting-to-length systems, uncoiling, straightening, feeding, guillotine shearing, conveyor and stacking of coiled sheets. The most distinctive feature of our Cut-to-Length Line is the cutting feature with the Rotary or Fly Guillotine shear system. It is a professional straightening thanks to the high quality and powerful Leveler Machine. And Cut to Length Line offers the possibility of automatic stacking of the materials. This is provided by the leveler cassette system.Suitable for all sheet material types from 0.3 mm to 10 mm. General features of the systems; Easy operation and maintenance with high level of automation Easy roll loading thanks to hydraulic uncoiler with loading trolley Maximum surface smoothness thanks to multiple straightening rollers Protecting sensitive surfaces with high quality rollers and carriers Burr-free and high-quality cutting automatic stacking system Lec Edpbveh E Sh Hovsac Compact design that takes up little space compared to its capacity Low cost, high quality, maximum efficiency. Itodjwutp Uepfx Adwsb

Year of construction: 1999, condition: excellent (used), Citizen M20-C CNC Swiss type lathe Technical Data Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Iodpfx Ajktfiasdwjtb Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Tool Holder: Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.