Used Slot Machines for sale (65,974)

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Laser Type: Fiber Laser Bodpehv U Uvefx Amnodd Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Bjdpfx Ashv U Swjmnodd Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 4000*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. Bjdpfehv U S Njx Amnodd The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING Bdedpeikivmjfx Amned

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. Bsdpfx Aey A Nglemnjdd The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: PZ131117, type of input current: AC, input voltage: 230 V, overall weight: 105 kg, input frequency: 50 Hz, Metrios MT11080 Optical Measuring Machine (2017) Bjdpfozhumrex Amnjdd

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Automatic Stacker: NATGRAPH Raised Bdedpfx Amjy Twkmsnjd Fully Cleaned

Condition: good (used), Year of construction: 2008, Mabeg Feeder SPS UV2 + C: UV Drying tunnel with material cooling Automatic Stacker: SPS AUTOSTACK 2 Bjdsw Eb Uaspfx Amnsdd

Condition: good (used), Year of construction: 2009, operating hours: 2,140 h, functionality: fully functional, 1 kg pouch filling machine Bsdezdf Umjpfx Amnodd

Year of construction: 2010, operating hours: 48 h, condition: good (used), functionality: fully functional, Pastry wrapping machine was purchased new in 2010 but was hardly used. Uses grease paper and PE sheets for wrapping Bsdpfx Amjzdf A Ronjdd

Condition: used, functionality: unexamined, machine/vehicle number: ML944E08, spindle speed (max.): 8,000 rpm, type of input current: three-phase, overall weight: 5,500 kg, input voltage: 400 V, CHEVALIER QP2033-L vertical machining center. Bodpfx Aozfgmxemnsdd The machine is available for inspection in Riga, Latvia. The machine is currently powered on and can be inspected by appointment. Additional photos and technical information are available upon request.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Bjdpfxshwhfij Amnedd Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Bdjdpfx Ashv U U Djmnsd Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. Bsdpfx Amohwhf Ujnedd With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. Bedpfxsh Hd A Ss Amnodd With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, total width: 780 mm, total length: 1,240 mm, total height: 1,330 mm, overall weight: 480 kg, cutting diameter: 120 mm, The CBR A3 Cable Stripping Machine is specially designed to strip the outer insulation material from cables of all sizes, making it easy to remove the conductive material inside. This series offers superior performance on; steel-armored cables (SWA), double steel-armored cables, steel tapes, PVC-coated cables, lead-coated cables, thick rubber-coated cables, Bsdsff H Imjpfx Amnsdd nylon-coated cables, low-grade cables, TT cables, and more. Specially processed blades with unique designs allow cables of any length to be cut and stripped for a long time without dulling the blades. All electrical and electronic components in the CBR A3 Series are Siemens brand. Our products are manufactured and certified in accordance with CE and EAC standards. Technical Specification POWER 5.5 KW CABLE DIMENSIONS 1-120 mm CUTTING SPEED 25 meter/min LENGTH 1240 mm WIDTH 780 mm HEIGHT 1330 mm WEIGHT 480 kg

Condition: new, Year of construction: 2022, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Pro Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Laser Head Brand: bodorgenius Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Bdodjgyw Sdjpfx Amnsd Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Condition: excellent (used), Year of construction: 2008, operating hours: 18,500 h, functionality: fully functional, controller manufacturer: Haas, controller model: haas, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 40, Haas EC500 2008 Bedoziflzepfx Amnodd ATC-40 tools . BT40. 2 Pallets spndel time -18500H Spindel rpm- 12000 rpm X-axis travel: 813 mm Y-axis travel: 635 mm Z-axis travel: 711 mm Pallet size: 500 x 500 mm Number of pallets: 2 Automatic pallet changer under power Located in Israel ready for inspection

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: OBX26601, warranty duration: 36 months, input voltage: 220 V, year of last overhaul: 2029, DGUV certified until: 12/2026, working width: 4,000 mm, conveyor belt width: 640 mm, type of input current: AC, total width: 1,020 mm, total length: 4,500 mm, total height: 1,450 mm, Equipment: CE marking, OBAKING Small & Medium Bakery idea choice equipments OBAKING automatic croissant making set OBX-C9000 Characteristics and stability of OBAKING puff pastries bread machines Croissant pastries dough sheeting and moulding machine The Dough press and puff pastry machine can achieve fully automatic computer-controlled Dough pressing speed, and the Dough pressing process is highly automated. It adopts a larger diameter pressure roller design, making the pressure surface softer and more uniform. PLC control system saves labor costs and time, simplifies storage configuration, reduces errors, and achieves large-scale standardized production. Ensure that the dough is rolled evenly and there is no uneven thickness. The thickness range of the pastry can be customized according to the flavor and taste of the product The machine is also equipped with an automatic powder spreading device, which timely spreads powder according to the dough situation and controls the amount of powder spread to avoid excessive powder spreading during the rolling of the dough, resulting in uneven baking of the croissants. OR Pastries breads ,palmier products etc Bdsdszdxwyepfx Amnsd

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), overall weight: 1,250 kg, total length: 1,300 mm, total width: 1,500 mm, total height: 2,140 mm, cutting length (max.): 500 mm, cutting diameter: 40 mm, number of blades: 5, rotor length: 400 mm, warranty duration: 12 months, MIZAR CMT Compact Series - All-In-One Copper Wire Granulator & Cable Recycling Machine The Ultimate Compact Solution for Maximum Copper Recovery The MIZAR CMT is an advanced, all-in-one cable recycling machine engineered for facilities with limited space but high-performance demands. Integrated with state-of-the-art Turbo Mill technology, it ensures the complete separation of even the finest copper wires (hair wires) from plastics, delivering maximum purity and scrap copper recovery in a single compact footprint. KEY ADVANTAGES & FEATURES • All-In-One Design: A complete, plug-and-play copper wire granulator engineered into a single, space-saving unit. • Integrated Turbo Mill Technology: Achieves exceptionally high purity by aggressively pulverizing and separating ultra-fine copper wires that standard granulators cannot process cleanly. • Optimized Input Capacity: Safely and efficiently processes scrap cables with a maximum thickness of up to 40 mm and a maximum feeding length of up to 50 cm. Bdedpjv Hbdrefx Amned • High-Efficiency Copper Recovery: Highly effective in separating copper and plastic components, maximizing your recycling profitability. • Cost-Effective Operation: Energy-efficient drivetrain minimizes daily operational costs without sacrificing throughput. PROCESSED MATERIALS • All types of scrap electrical cables, flexible wires, communication cables, and complex harnesses (Max Ø 40 mm / Max Length: 50 cm). Ready for an all-in-one cable recycling upgrade? Contact us for a customized quotation, technical details, or a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, -TFON Edge Rounding Machine Specifications: Material Compatibility: Steel, Aluminum, Stainless Steel. Process: Edge Rounding. Bsdpoui Ih Rjfx Amnodd Material Thickness: 0 – 120 mm Maximum Material Width: 1,000 mm Minimum Part Dimensions: 50 × 50 mm Maximum Material Weight: 500 kg. Conveyor Speed: 0.6 – 4.0 m/min Machine Weight: 3.000 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. Bsdotmrkrepfx Amnedd -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces: Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm. -Minimum Material Width: 250 mm. Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Bdodpfx Asrt Tpnjmned Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm. Emery Band Drum Diameter: Ø400 mm. Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency...

Condition: new, Year of construction: 2026, -TFON Edge Rounding & Surface Processing System: Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications. -Material Compatibility: -Mild Steel, Aluminum, Stainless Steel. -Working Thickness Range: -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Bjdoi E Tkaepfx Amnsdd Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation.

Condition: refurbished (used), Year of construction: 2022, -Pre-owned Surfacer Series TFON RB-2510 (M) -This TFON RB-2510 is a reliable, well-maintained pre-owned machine, ready for immediate use. Bodpfoiih Aajx Amnedd --Previously utilized exclusively in our inhouse production for deburring and edge rounding applications, this unit remains in excellent working condition and is fully operational. It has proven its reliability and durability, making it a strong choice for long-term use in your production line.