Used Smoke Chamber for sale (2,520)

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,300 mm, total width: 1,830 mm, total height: 2,735 mm, warranty duration: 12 months, overall weight: 950 kg, input voltage: 380 V, power: 35.5 kW (48.27 HP), pressure: 4 bar, temperature: 110 °C, Universal machine for heat treatment of all kind of meat products and fish. Heating can be realized by electricity, vapor or gas. Air circulation system provides processes steadiness and operates with two speeds 1450/2850 min-. Smoking generator can be installed to the left or to the right. Valve pneumatic control. Chamber is controlled by ADITEC. Dodpfx Aewp I Axsbzsch Control unit measures and control chamber and sausage temperature, humidity, delta t, processing time. 100 programs can be saved by 10 steps. Following sensors are used: Pt 100. Software for visual control is offered as an option. Chamber is equipped with a system for automatic washing. Each module is equipped with its own heating and circulation which ensure processes steadiness and processing time reduction.

Condition: used, For sale or free of charge are three climate smoke chambers manufactured by AUTOTHERM, including accessories. These units are ideally suited for meat and food processing, particularly for cold smoking. Technical Data / Features: Chamber 1: approx. 8 racks (W approx. 2.10 m x D 5 m) Chamber 2: approx. 10 racks (W approx. 2.10 m x D 6 m) Chamber 3: approx. 12 racks (W approx. 2.10 m x D 7 m) Cold smoke system with 2 smoke generators (Goliat, sawdust) Temperature range up to approx. +22 °C (hot water heat exchanger) Humidity control available Cooling coil (R232, R404) Some refrigerant compressors present Construction: Air ducts, wall cladding, and control cabinet made of V2A (stainless steel) Condition: Electronics/control currently non-functional Control cabinet available Condition as shown in the pictures Additional equipment / accessories: Smoking sticks (wood) 2 kettles Cooking chamber (for 2 racks) Cleaning machine (defective) Freezer Important notes: Available free of charge Dismantling and transport to be organized by the buyer Inspection possible by appointment Dcsdpfx Aboyw Hl Ijzoh

Condition: used, overall dimensions 1500x2300x3000 mm; 2 trolleys 1x1x2 m; power supply 400 V, 50 Hz; electric heating 50 kW; Dcsdpfxjyhauis Abzjh turbines 2x4 kW; control computer Mikster smoke generator: external, installed on the right side, power 2 kW, dimensions 750x1000x1400 mm.

Condition: ready for operation (used), Year of construction: 2018, FESSMANN ECO Line smoking chambers of the high-performance T3000 624 2W model. Manufactured in 2018 by FESSMANN GmbH & Co. KG, two of these chambers are equipped with an integrated cooling function, making them ideal for hot smoking, cooking, cooling, and thermal processing. These chambers belong to the ECO Line, designed with energy efficiency, reduced emissions, and optimal product quality in mind. Ideal for modern meat processors who want to reduce operating costs without sacrificing performance. Technical data: Manufacturer: FESSMANN GmbH und Co. KG Model: T3000 624 2W ECO Line Year of manufacture: 2018 Available units: 4 (2 with cooling option) Voltage: 230/400 V, 50 Hz Control voltage: 230 V / 24 V Motor power: 6.0 kW Heating power (HD + EL): 125 kW Cooking power (ND 0.5 bar): 74 kW Application: hot smoking, cooking, cooling, pasteurization Key advantages: Part of the ECO series by FESSMANN – designed with energy savings and environmental protection in mind 2 chambers with built-in cooling function Precision and durability of German engineering Versatile use in the production of sausages, hams and cold cuts Fast and even processing of products Available immediately with complete technical documentation Manufacturer FESSMANN GmbH und Co. KG Model T3000 624 2W ECO Line Year of manufacture 2018 Available units 4 (2 z opcją chłodzenia) Voltage 230/400 V, 50 Hz Control voltage 230 V / 24 V Motor power 6,0 kW Dcjdow Ew Hrjpfx Abzeh Heating power (HD + EL) 125 kW Cooking power (ND 0.5 bar) 74 kW Application hot smoking, cooking, cooling, pasteurization

Condition: good (used), functionality: fully functional, Maurer-Atmos Smoking Chamber for 3 Trolleys Manufacturer: Maurer-Atmos Device type: Smoking and cooking chamber with friction smoke generator The Maurer-Atmos smoking chamber is designed for thermal processing (smoking, drying, cooking) of meat, fish, and sausage products. Equipped with a friction smoke generator, this unit allows for both hot and cold smoking, ensuring excellent product quality, color, and aroma. Dsdpfsxtvh Iox Abzsch Capacity: 3 smoke trolleys Internal dimensions: 3100 × 1100 × 2000 mm Overall dimensions: 4000 × 1800 × 3300 mm Smoke generator type: Friction smoke generator The Maurer-Atmos chamber is a reliable, industrial solution for meat processing plants and food processors, enabling uniform smoking and thermal processing of up to three trolleys simultaneously. The use of a friction smoke generator allows for efficient consumption of smoking material and consistent, high-quality results.

Condition: excellent (used), functionality: fully functional, NESS Smokehouse Chamber Installation with Cooling Shower and Smoke Generator Complete NESS smoking installation, designed for thermal processing, smoking, and cooling of meat products. The set includes smokehouse chambers of various capacities, a cooling shower, a wood chip smoke generator, and a condensate tank with Grundfos circulation pumps. The set includes: 1. NESS Smokehouse Chamber for 2 smoking trolleys Internal dimensions: 2100 × 1100 × 2000 mm External dimensions: 2400 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm 2. NESS Smokehouse Chamber for 2 smoking trolleys Internal dimensions: 2100 × 1100 × 2000 mm External dimensions: 2400 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm 3. NESS Smokehouse Chamber for 1 smoking trolley Internal dimensions: 1100 × 1100 × 2000 mm External dimensions: 1500 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm Dsdpoxq Rt Hofx Abzech 4. Smokehouse Chamber for 1 smoking trolley Internal dimensions: 1030 × 1120 × 2000 mm External dimensions: 1350 × 1420 × 3050 mm Control cabinet: ADITEC MIC 200F, 350 × 200 × 550 mm No door 5. NESS Cooling Shower for 2 smoking trolleys Internal dimensions: 2300 × 1170 × 2060 mm External dimensions: 2400 × 1350 × 2700 mm Control cabinet: NESS Duschmatic, 380 × 230 × 380 mm 6. NESS Wood Chip Smoke Generator Dimensions: 900 × 550 × 2400 mm 7. Condensate tank with 2 Grundfos circulation pumps Tank dimensions: 1100 × 1150 × 1200 mm Pump dimensions: (2×) 250 × 200 × 600 mm The NESS installation is an advanced smokehouse system enabling a complete technological process: smoking, cooking, cooling, and drying. The chambers are equipped with independent control cabinets featuring the Digitronic RF3 D-N system for precise process parameter management. The Duschmatic cooling shower allows for rapid and uniform cooling of products after the smoking process. The wood chip smoke generator and the condensate system with Grundfos pumps ensure reliable and hygienic operation of the entire installation.

Condition: ready for operation (used), Trolley dimensions: 920x910x1950mm, connected load: 24kW, length: 1560mm, height: 2560mm, with documentation, a few years ago the electrics were completely overhauled. Dcjdon R Ngwopfx Abzeh

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Dodpfoy R Tdwex Abzsch

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. Dodpfx Absvlpctjzjch DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Dedpfx Absym U Syozsch Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm.

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Serial number: 5710JL525 Dcsdpfxeym U Ine Abzeh 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Dcodpouhmacjfx Abzsh Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: used, Very little used Antares model AKER 630/50-OO chamber type filter press. - Manufacturer: Antares - Model: AKER 630/50-OO - Type of filter press: Chamber type - Dimensions of filter plates: 630 x 630 mm Dcjdjzbua Hepfx Abzsh - Number and material of plates: (49) polypropylene chamber plates and (2) end plates - Number of chambers: 50 - Closing of filter press: Electrohydraulic - Hydraulik Vrchlabí model SHA-45, electric motor 1.5 kW - Removal of filter plates: Manual - Filtrate discharge: Open delivery - Includes: control panel (switchboard is not included) Specifications: Plate Size: 630 x 630 # of Plates: 49 Delivery: Open Eyes: 1 Plate Type: Recessed Closure: Hydraulic

Condition: excellent (used), Year of construction: 1983, Longitudinal Flow Dryer – Heating via Electricity or Hot Water Internal chamber length approx. 4500 mm Internal chamber width approx. 750 mm Internal chamber height approx. 600 mm Chamber volume 2.0 m³ Top loading – trunk design Manual / fully automatic control Electronic controller type C Longitudinal ventilation Number of fans: 1 Fan motor power 0.55 kW, 400 V, 50 Hz Electric heater: 4.2 kW INCLUDES: Aluminum stacking strips Wood moisture measuring probe Dedpfx Asy Emqgsbzoch Operating manual, electrical diagram, etc. Space requirement approx. 5600 mm x 1200 mm x 1600 mm Weight: 400 kg Note on used machinery: • Technical data subject to errors and prior sale. • Quoted prices are ex-location – free loading! • Machines have been cleaned and function tested. • All machines are bought as inspected, without any warranty claims. Buyers are free to inspect the machines on site. • Special agreements only valid in written form. (We will respond to inquiries only if your address and telephone number are provided!)

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter Dcsdpfoxxalnsx Abzeh - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: excellent (used), - for unattended operation - for temperatures from 100 °C to 300 °C - external dimensions: 1500 x 2773 x 2096 mm (W x H x L) - clear internal dimensions per chamber: 800 x 800 x 1100 mm (W x H x L), height with beams = 700 mm - maximum batch dimensions: 700 x 600 x 1000 mm (W x H x L); maximum weight: 500 kg Connection values per chamber: circulation = 3.0 kW (1 unit); electric heating = 30 kW (1 control group) Temperature accuracy +/- 5 K at 150 °C, 250 °C, 300 °C Dodpfx Abszbnnwezjch adjustable up to +/- 1.5 K temperature accuracy depending on the batch geometry 1 Protherm 500 program controller

Year of construction: 2019, condition: excellent (used), Memmert ICH 750 L eco – ex demo (2019) – L version with lighting We offer a Memmert ICH 750 L eco climate chamber, L version (with lighting), from 2019. This unit comes directly from the manufacturer's showroom and has been used very little. It is in very good technical and visual condition. Key features: * Model: ICH 750 L eco (L version – with lighting) * Year: 2019 (ex demo) * Capacity: approx. 750 liters * Temperature range: * without humidity: 0°C to +60°C * with humidity: 0°C to +60°C * Humidity range: 10–80% RH * Energy-efficient ECO cooling system * Digital controller with intuitive operation * Stainless steel chamber L version – lighting: * Integrated lighting system (light + UV) * Ideal for photostability testing (e.g., according to ICH Q1B) * Uniform illumination of samples * Possibility of operation in day/night cycles Equipment and advantages: * Precise temperature and humidity control Dedpfxoymy Ute Abzsch * Very good uniformity of conditions within the chamber * Quiet and stable operation * Reliability and high-quality Memmert construction Condition: Ex demo unit – minimal signs of use, fully functional, tested before sale. Additional information: Upon request, we can send photos, a video of the unit in operation, or conduct an online presentation. 9-month warranty on spare parts for the unit.

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Testing Device Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion testing device / salt spray chamber for salt spray, condensation water, and combined testing. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watt: 2800 W K Watt: 2150 W B Watt: 500 W W Watt: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption (humidifier): approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling volume (bottom trough system): approx. 15 liters Djdpfxjzba N Ts Abzjch Testing procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used device from industrial application. Optical condition according to the pictures. Interior with visible deposits / corrosion traces. Device can be switched on, display is active. A complete technical functional test under test conditions was not performed by us. Inspection possible by appointment. Scope of supply: see pictures. Loading can be arranged. All information provided to the best of our knowledge based on available documents, nameplates, software displays, and data sheets. Errors and changes reserved.

Condition: good (used), Weiss SC 450 Corrosion Testing Equipment Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Corrosion testing equipment / salt spray test chamber for salt spray tests, condensation water tests, corrosion testing, material testing, and quality assurance. Technical Data Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Temperature range, salt spray test: 5 K above ambient temperature to +50 °C Temperature range, condensation water test: 5 K above ambient temperature to +45 °C Dcjdpfx Abjzbatrozeh Temperature stability over time: ±1 K Brine tank: approx. 180 liters Compressed air: min. 4 bar / max. 10 bar Weight empty: approx. 180 kg Electrical Data Voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2 kW Rated current: 8.7 A Equipment Liebisch / Weiss control system S!MCON/32 control and regulation unit Color touch panel Acrylic glass nozzle in the spray channel Heated compressed air humidifier Flow and dosing device for brine Brine storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Test procedures Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Condition Used equipment from industrial use. Operating hours according to display: approx. 37,926.6 h Optical condition according to pictures. Interior with visible deposits / corrosion marks due to use. The device can be switched on, display is active. A complete technical function test under test conditions has not been carried out by us. Inspection and testing on-site are possible by arrangement. Scope of delivery: see pictures. Loading can be arranged. All information provided to the best of our knowledge based on available documents, nameplates, software displays, and manufacturer data. Errors and changes excepted.

Condition: used, filter area: 252 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Parameters: Efficiency - 12000 m3/h Filtration area 252 m2 Cartridge filter inserts - 12 pcs. 15 kW engine Dedpfx Aovzy Irobzjch inlet diameter - 500 mm Dimensions: height - 3.65 m width - 2.10 m depth - 2.10 m fan: 1.75 m x 1.50 m height 1.45 m stock no.: 0948

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature test chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (time-based): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm Width: 1100 mm Depth: 1330 mm External dimensions: Height: approx. 2050 mm Width: approx. 1300 mm Depth: approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert grid: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connector CE marking Weight: approx. 1500 kg Condition Used unit from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of supply: see pictures Inspection possible by arrangement. Dsdpfx Aeza Dv Iebzech Loading can be organized. Subject to changes and errors in the technical data.

Condition: used, Year of construction: 2015, Pfeiffer LTS-KKB/120 Helium Leak Test Chamber (2015) 3x400V/50Hz/3x100A Dsdpfx Aoy Uxncsbzech 7700kg weight

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Suction capacity approx. 2000m³ Dcsdpou Nv Afofx Abzjh mobile over 4 wheels, front braked *

Condition: used, Year of construction: 1999, Technical details: Dcedpfxeymc Txs Abzsh pass through height: 2000 mm tank capacity: 800 l cycle time: - sec Heating capacity: 45 kW electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 63 KW daylight opening: 2000 mm space requirements of the machine approx.: 3.800 m *

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw volume capacity: k.A. m³/h rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm Dsdpfx Aovdczajbzech motor capacity: 3,3 kW weight of the machine approx.: 600 kg dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *