Used Smoke Chamber for sale (2,643)

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Lsdpfx Afoygultsaohc 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Lhodpfxsygulmo Afaoc Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), CTS Type: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Cooling unit: water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Rack: Stainless steel, support surface 620 x 600 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Control system: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numeric input of setpoints Plain text fault messages RS 232 interface Ethernet interface Free switching channels for user-side test item control Lsdsygui Sspfx Afaehc Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Sound pressure level

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Ljdsyguh Ijpfx Afaohc Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: new, # suitable for treatment under inert gas # with rapid cooling by fan Lhjdjcdi R Ejpfx Afaec external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg

Condition: used, Electric heating: 18 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: integrated indoor the chamber Lhedpfx Aof U Tb Rofaoc Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 130 Lenght: 120 Height: 230 Trolley dimensions in cm: 90*90*160 height Delivery time: 30 working days after advanced payment

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Ljdpfoyglb Sjx Afashc Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Condition: excellent (used), 293 USED WP Garstop refrigerated proofers. EXTERNAL DIMENSIONS (in cm): - Width 180, - Depth 270, - Height 256 (including electrical system: 276). INTERNAL DIMENSIONS (in cm): - Width 148, - Depth 240, - Height 187. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile. Ljdpfx Afsygv Snsaohc

Condition: excellent (used), 292 USED WP Garstop refrigerated proofers. EXTERNAL DIMENSIONS (in cm): - Width 180, - Depth 270, - Height 256 (including electrical system: 276). Lhedpfjygv I Aox Afasc INTERNAL DIMENSIONS (in cm): - Width 148, - Depth 240, - Height 187. NOTE: Price is for one unit. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 21 kg, Auction of a Plymovent KUA-2/H! Lhodpfsyf Dnhex Afasc MACHINE DETAILS Net weight: 21 kg

Condition: used, -Controlled fermentation chamber: -Dimensions: 1150x3750x2225 mm -External chamber width: 1,150 mm Lhedpsyman Tsfx Afajc -External chamber depth: 3,750 mm -Type of fermentation chamber: BFC -Trolley dimensions: 600 x 800 (overall 670x825) -Number of trolleys: 4 -Usable chamber depth: 3,600 mm -Usable cell width: 1,000 mm -Door frame type: Single door 1,000 mm -Evaporator side: Left -Control panel: OPTICOM -Electrical connection BFC: P6: 400-440V / 3PH + N + PE / 50-60Hz -Tunnel-type chamber: No -Year of manufacture: 12/2014 -Refurbished equipment: Equipment is prepared upon order. Lead and return times are agreed at that moment (please request the price after refurbishment). -Automatic fermentation cycle management -Temperature management -Manual and automatic mode -30 programmable cycles -Automatic end-of-cycle date management -Fault management -Smooth keyboard, scratch-resistant finish.

Year of construction: 2016, condition: used, NARDI INTERNATIONAL K 200 WOOD DRYING CHAMBER – 2016 The machine is in very good technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. ⸻ 1. Basic parameters Load capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Lhodpfsygcwkex Afajc Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water at 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (controls) ⸻ 2. Construction Chamber made entirely of oak acid-resistant aluminium. Aluminium panels insulated with 140 mm glass wool. INOX screws eliminate thermal bridges. Exterior sheathing made of trapezoidal sheet metal with air ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h ⸻ 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures even and energy-efficient drying. ⸻ 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts This system significantly reduces energy consumption. ⸻ 5. Control system CE control cabinet, IP55. PC computer with LEONARDO 3.0 software (Windows 7). Features: • multi-stage cycle programming, • parameter archiving, • graphic process visualization, • control of up to 32 chambers. ⸻ 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module ⸻ 7. Commercial information • Price: EUR 50,000 / unit • Available: 4 units (4-chamber module) • Module price: EUR 200,000 • Sale only of complete module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If you are interested, please contact us by email or WhatsApp.

Year of construction: 2021, condition: used, For sale: NARDI INTERNATIONAL K 200 industrial timber drying kiln, year of manufacture 2021. The kiln is fully operational and available for inspection (start-up possible). The offer concerns 1 unit from a modular kiln system (5 units from 2021 available). NARDI INTERNATIONAL K 200 TIMBER DRYING KILN – 2015 For sale: NARDI INTERNATIONAL K 200 industrial timber drying kiln. The machine is in very good technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. — 1. Basic Specifications Batch capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading side): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control system) — 2. Construction Chamber made entirely of oak acid-resistant aluminium. Aluminum panels insulated with 140 mm glass wool. INOX screws, thermal bridge elimination. External skin made from trapezoidal sheet metal with integrated ventilation ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind load up to 100 km/h — 3. Air Circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 rating • High-temperature bearings • Individual inverters Ensures uniform and energy-efficient drying. — 4. Heat Recovery • Centrifugal fan • Dual heat exchangers • 6 Belimo dampers Lodpfjygcwdsx Afaohc • PLC control • Acid-resistant INOX ducts System significantly reduces energy consumption. — 5. Control System CE control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Capability for: • multi-stage cycle programming, • parameter archiving, • graphical process visualisation, • control of up to 32 chambers. — 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module — 7. Commercial Information • Price: 72,000 EUR / unit • Available: 5 units (5-chamber modular system) • Sale only as a 5-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us via email or WhatsApp.

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser unit The KKM 110/45 model is part of the TKM/KKM modular system by RS Simulators—a modular climatic chamber that is assembled on-site. This design offers: Modularity: Individual segments are preassembled and set up at the customer’s location. This makes retrofitting (adding depth or expansion modules) and later relocation straightforward. Technical specifications climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H), incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) in side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in front chamber door, heated 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temperature fluctuation: ± 0.8K – 1.5K as per DIN 50011 with empty test area Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Lhodpfjwwg Uvjx Afajc Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are always carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Condition: good (used), operating hours: 75,383 h, Espec PR-3KP Environmental test chamber -20 to +100 °C Features: Manufacturer: Espec Lhjdpowbz Hhefx Afaec Type: PR-3KP Temperature range: -20 to +100 °C Humidity: 20 to 98 % rH Refrigerant R-404A:- CFC-free - ozone-friendly Operating hours: 75383 Dimensions: External dimensions: HxWxD= 1680 x 1050 x 1200 mm Chamber dimensions: HxWxD= 850 x 600 x 800 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1996, Vötsch VTR 7033/S Temperature test chamber Manufacturer: Vötsch Type: VTR 7033/S Item no.: 60885637 Temperature chamber Temp. range: -70°C to +180°C Mains voltage:400V Rated current:24A Rated output: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of manufacture: 1996 TK 07 Financing through our bank is also possible. Ledpfxewbpzms Afajhc komplett-konzept.leasingo.de You will find further articles - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 Environmental Test Chamber is designed for laboratory applications that require testing of materials and components in a known environment. With its versatile capabilities and easy-to-use controls, this programmable unit can be used to simulate a variety of environmental conditions for scientific studies, product testing and process control. Data for temperature tests in single chamber operation Hot chamber: Temperature shock test chamber Test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation in space ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber Test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation in time in the middle of the usable space ± 1 K Temperature deviation in space 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air) Heating 1.5 K/min Cooling 4K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 % , 50 Hz Rated power: 30 kW Rated power: 50 A Refrigerant: R-404a /R-23 Lhedpowbdv Sofx Afaec Chiller: Water-cooled Weight: approx. 940 kg Year of construction. 1998 Test room dimensions: Width 770 mm x depth 650 mm x height 610 mm Housing dimensions: Width 1200 mm x depth 1800 mm x height 2050 mm TS 05 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1999, Nema NCG 4390 S Temperature shock chamber -40°C to +180°C Lhsdpsuzgt Esfx Afaoc Manufacturer: Nema Type: NCG 4390 S Temp. range: -40°C to +180°C Dew point range: +5 °C to +89 °C Mains voltage: 400 V Rated current: 32 A Nominal output: 15 kW Refrigerant: R 404 A Year of construction: 1999 Weight: 2720 kg External dimensions: W 3950 x D 1700 x H 2280 mm Chamber: W 3000 x D 1300 x H 1170 mm WLG STEAM-O-MAT Electric automatic steam humidifier and producer of mineral-free and odorless steam Manufacturer: WLG STEAM-O-MAT Type: EDB 8 Heating voltage: 400 V Output: 6 kW Steam quantity: 8 kg/h Water-cooled condenser Manufacturer: Bitzer Water-cooled Mains voltage: 400 V Rated current: 13 A Nominal capacity: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With exhaust system and table Upward opening door keeps hot surface away from user Soft self-closing door (for 5, 13, 21 & 23 liter models) Standard start delay and process timer function Durable aluminum oxide support plates for the heating elements; sturdy door surround and base plate High quality fiber insulation with low thermal mass Powerful heating elements on both sides provide very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles new and used - you will find in our store! International shipping costs on request! Lhjdpfx Afopygpfjaec

Condition: excellent (used), Heraeus Vötsch VT 7100 Temperature test chamber -70°C to +180°C Heraeus Vötsch Temperature test chamber VT 7100 Lhedpfxeph Uzxs Afaec -70°C to +180°C 1035 liters Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Lodpfx Afjd Spx Doaehc Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Lodpfx Ajd Srlrefaohc Year 1992 3 x 380 volts 41 kW Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 1996, Overview  This chamber pasteurizer was manufactured in 1996 by German company JOHA (Johannes Arno Hartenstein). According to available documentation, the machine was acquired in 2021 as a unit described as overhauled and partially renewed, and the control system was renewed in 2020. The machine is immediately available and can be viewed in person. Technical data  Type: Chamber pasteurizer Heating: Steam Capacity / Content: Total chamber volume: approx. 10.3 m³ Net usable volume: approx. 5,850 L Electrical connection: 230 / 400 V, 50 Hz Installed power: approx. 5.2 kW Current: approx. 10.5 A Fuse: 3 × 35 A (slow-blow) Protection class: IP54 Steam connection: DN 80 Condensate connection: DN 50 Max. steam pressure: approx. 0.2 bar Steam consumption: approx. 300 kg/h Noise level: < 70 dB(A)   Lhsdsyb Subjpfx Afasc

Year of construction: 1995, condition: ready for operation (used), Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible. Lhsdpfx Aeyit Hbofaoc

Condition: used, tank capacity: 1,800 l, GENERAL Design: rectangular Remarks: Double-chamber tank 1800 liters (1 x 1300 liters, 1 x 500 liters); each chamber has a manway, diameter approx. 415 mm; each chamber has 1 outlet (1 x internal pipe diameter approx. 35 mm, 1 x internal pipe diameter approx. 38 mm); 2 welded reinforcements made of V2A in one of the chambers (see photos) Total width: 2,080 mm Total height: 1,500 mm Total length: 1,100 mm Location: Bremen Volume: 1,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: Food products TANK Mounting: Feet Number of feet: 4 pieces EQUIPMENT Lhsdpfx Ajyck Tfsfajc Manway / Dome: on the tank MATERIAL CHARACTERISTICS Outer surface: marbled Feet material: stainless steel