Used Snap On Solus Pro Update for sale (14,935)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Isdpfxox Uyzqo Amysat 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 755 mm, total width: 400 mm, total length: 880 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 60 kg, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 16 A, open-circuit voltage: 87 V, welding current at 60% duty cycle: 200 A, welding current at 100% duty cycle: 170 A, input current: 16 A, protection type (IP code): IP23, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: documentation/manual, type plate available, Demonstration unit, year of manufacture 2024 Including TIG torch i-LTW 3000-PM, 4 m Iajdpfxeyrttye Amyet TIG Welding Welding range 3~ 400 V: [A] 5 - 300 Voltage range: [V] 10.2 - 20 TIG duty cycle AC 400 V Duty cycle AC 100% (40°C): [A] 200 Duty cycle AC 60% (40°C): [A] 230 Duty cycle AC max. welding current (40°C): [%] 30 TIG duty cycle DC 400 V Duty cycle DC 100% (40°C): [A] 230 Duty cycle DC 60% (40°C): [A] 270 Duty cycle DC max. welding current (40°C): [%] 45 Electrode Welding Welding range 400 V: [A] 10 - 200 Voltage range: [V] 20.4 - 28 Usable electrodes: [Ø in mm] 1.5 - 5 Electrode duty cycle Duty cycle 100% (40°C): [A] 170 Duty cycle 60%: [A] 200 Duty cycle max. welding current (40°C): [%] 60 General Specifications Open circuit voltage: [V] 77 - 87 Power supply 400 V Mains voltage 3~ (50/60 Hz): [V] 400 Mains fuse 3~ (50/60 Hz): [A] 16 Positive mains tolerance 3~ (50/60 Hz): [%] 15 Negative mains tolerance 3~ (50/60 Hz): [%] 15 Mains plug: CEE 16 Standards and Approvals Protection class: IP23S Insulation class: F Standard: EN 60974-01 Markings/Certification: CE, S Cooling system Type: Gas-cooled, water-cooled Cooling capacity (l/min): [kW] 1.14 Tank capacity: [l] 3.4 Dimensions (L x W x H): [mm] 880 × 400 × 755 Weight: [kg] 60

Condition: new, functionality: fully functional, machine/vehicle number: S.-Nr,: 20135, Brand new 24-zone hot runner controller with complete accessories. Iodpfsw N Rd Dex Amyoat

Condition: used, Technical details: welding current: 500 A Length: 1200 mm height: 1260 mm connected load: 26,6 kVA connected load: 100 kW Iajdpfx Ajwrq Txemyst open-circuit voltage: 65 V machine weight approx.: 147 kg dimensions of machine: 1,2 x 0,45 x 1,2 m

Condition: new, bore capacity in steel (diameter) 30 mm throat 254 mm bore stroke 120 mm 4 Motor output 9 speeds 120 - 1810 U/min column diameter 92 mm table surface area 475 x 425 mm total power requirement 1,1 kW dimensions 915 x 450 x 1705 mm weight ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice Iedpfjq Nrmrex Amyoat

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 109292, conveyor belt width: 650 mm, total width: 1,100 mm, total height: 1,500 mm, total length: 1,800 mm, overall weight: 400 kg, input voltage: 240 V, table height: 800 mm, working height: 800 mm, input current: 3 A, ISC Recycle offers a used MOSCA Sonixs-TR-6 Pro automatic strapping machine, sold as-is. This industrial-grade machine is designed for automatic strapping of cartons, packages, and single units. It is particularly well-suited for logistics, industrial, and order preparation environments where reliability, consistency, and increased productivity are essential. - Brand: MOSCA Isdpfx Aox I Naiomysat - Model: Sonixs-TR-6 Pro - Type: Automatic strapping machine - Serial number: 109292 - Usable frame width (internal): 800 × 800 mm - Year: 2015 - Power supply: 100–240 V / 50–60 Hz - Condition: Used – sold as-is Advantages: - Fast and precise automatic strapping - Robust design for heavy-duty use - Suitable for logistics and industrial lines - Efficient solution to optimize packaging and shipping - Quantity available: 1 unit - Price: €8,500 excl. VAT Option: Rothacker MOSCA conveyor: €400 excl. VAT Availability: Immediate

Condition: excellent (used), functionality: fully functional, machine/vehicle number: fe63b5ea, Year of construction: 2022, Markforged Onyx Pro 3D Printer (2022) – incl. accessories – excellent condition For sale is a Markforged Onyx Pro (Desktop Series), delivered in August 2022, in perfect technical condition and with very little usage. The current new price from Markforged is approximately €12,538 including the service package. Here you get a well-maintained device with complete accessories at a significantly reduced price. Technical Specifications - Printing process: FFF with Continuous Fiber Reinforcement (CFF) - Plastic materials: Onyx, PLA - Fiber: Glass fiber (continuous fiber reinforcement) - Layer thicknesses: 0.1 / 0.125 / 0.2 mm - Build volume: 320 × 152 × 154 mm - Eiger software (cloud-based) - Serial number available Iodpfxeyh Hike Amyjat Ideal for functional components, fixtures, prototypes, and small series production in industrial environments. Scope of Delivery - Markforged Onyx Pro 3D printer - Dry box for material storage - Build platform - Accessory set: - 3× FFF plastic replacement nozzles - 3× CFF fiber replacement nozzles - 2 original sealed filament spools included - Original invoice from Mark3D GmbH - Professional initial installation was carried out by Mark3D Service Status - The original 3-year service plan was valid until 30.08.2025 and is now expired. - There is currently no active service contract. Condition - Very well maintained - Minimal usage - Fully functional Viewing and functional test available by appointment. Asking price €8,490 negotiable (net) Serious basis for negotiation. Significant savings compared to current new price. Other - Sale preferably to commercial buyers - Collection preferred; shipping available by arrangement All information has been provided to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: new, Year of construction: 2025, Shrink tunnel for middle sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W20L PRO-version and speed shrink W30L PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 14kW; speed: 0-30m/min; temperature: up to 175°C; max. product dimensions (mm): W370xH230; machine dimensions (mm): L1200xW670xH1290; weight (net/gross): ca. 250/300kg. Iaodpfsv Nl Uaex Amyet Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Shrink tunnel for large sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W15 4XL PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 24kW; speed: 0-30m/min; temperature: up to 175°C; max. product dimensions (mm): W940xH250; machine dimensions (mm): L2800xW1460xH1280; weight (net/gross): ca. 350/400kg. Iasdpfx Ajv Nl Umemyot Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(100-500)xH(5-180) mm; sealing blade length: 630mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L6350xW1950xH1380 mm. Iasdpfx Aev Nl Hvjmyjt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external infeed belt and side guide rails for products in multi-pack format. Different guide rail systems are available depending on product height and shape. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm; sealing blade length: 530mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L2935xW1805xH1385 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iajdpfev Nl H Asx Amyot

Condition: new, Year of construction: 2025, Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external infeed belt and side guide rails for products in multi-pack format. Different guide rail systems are available depending on product height and shape. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; max. packaging size: L(80-700)xW(80-230)xH(10-180) mm; sealing blade length: 380mm; 220V, 5 kW, 6bar, 0.6m³; machine dimensions: L2295xW1160xH1370 mm. Iajdpfsv Nl E Ssx Amyjt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; max. packaging size: L(80-700)xW(80-380)xH(5-180) mm; sealing blade length: 530mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L4755xW1660xH1370 mm. Iedev Nl Hijpfx Amysat Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical packaging machine, high speed machine with continuous reciprocating sealing jaws motion, suitable to do pillow and gusset bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(50-300)xW(50-240)mm (single pulling); film width: 130-510mm; max. speed of the machine in neutral: 180 cycles/minute; stainless steel; 380V/9.0kW; 6bar, 0.25m³/min; machine dimensions: L1700xW1300xH1700mm; weight: 700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iedpfxsv Nmyds Amyjat

Year of construction: 2025, condition: new, Vertical packaging machine, high speed machine with continuous rotary sealing jaws motion, suitable for pillow bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(80-500)xW(70-265)mm (single pulling); film width: 170-560mm; max. speed of the machine in neutral: 180 cycles/minute; stainless steel; 380V/7.5kW; 6bar, 0.25m³/min; machine dimensions: L1500xW1200xH1620mm; weight: 700 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iaedpfxsv Nmyke Amyst

Condition: new, Year of construction: 2025, Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external infeed belt and side guide rails for products in multi-pack format. Different guide rail systems are available depending on product height and shape. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; max. packaging size: L(80-700)xW(80-380)xH(10-180) mm; sealing blade length: 530 mm; 220V, 5 kW, 6bar, 0.6m³; machine dimensions: L4100xW1610xH1370 mm. Iaodjv Nl Hcepfx Amyet Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm; sealing blade length: 500mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L5405xW1780xH1380 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iaedpfjv Nl Hpex Amyot

Condition: new, Year of construction: 2025, Shrink tunnel for large sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W20XXL PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 30kW; speed: 0-30m/min; temperature: up to 175°C; max. product dimensions (mm): W700xH300; machine dimensions (mm): L2100xW950xH1315; weight (net/gross): ca. 350/400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iajdpfxev Nl Ugo Amyet

Condition: used, machine/vehicle number: 23500716, From business liquidation: Pulse welding system Kemppi Pro 4200 Evolution. The unit has been function-tested! 420 amperes power at 80% duty cycle. Welding range: 10-420A. Wire feed case Promig 530. MXE MLS control. 4-roller wire feed. Water cooling. 2/4-stroke operation. Torch 4 meters + wire, ground cable and pressure regulator. Dimensions in mm approx. 1260x440x1020. Iodpsxq Rcusfx Amysat

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. Iaedpfx Aeq N U Dujmyst - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. Iedpfx Aoq Nywxjmyoat 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.

Condition: excellent (used), Professional precision lathe from the renowned German manufacturer PROXXON. Model PD 400 is designed for precision machining of metal, aluminum, brass, plastics, as well as small steel components. The machine is in very good technical and visual condition. It operates quietly and smoothly. The package includes a comprehensive set of accessories as shown in the photos, including lathe tools, documentation, drill chuck, and BISON lathe chuck. Ideal for workshops, model making, servicing, small-batch production, and precision work. Technical data: Iasdpfx Aoy Sidpjmyjt • Manufacturer: PROXXON • Model: PD 400 • Power supply: 230 V / 50–60 Hz • Spindle speed range: 80 – 2800 rpm • Motor power: • 240 W at 1400 rpm • 550 W at 2800 rpm • Speed control: 2 ranges • Lathe chuck: 3-jaw BISON • Tailstock with drill chuck • Precision guide bed • Handwheels with vernier scale • Chuck guard • Forward/reverse spindle rotation Included: • PROXXON PD 400 lathe • BISON lathe chuck • Drill chuck • Lathe tools • Spare inserts/tools • Documentation and manual • Wrenches and accessories as shown in the photos Condition: Used, in very good condition. Shows normal signs of use. Complete machine, ready for operation. Applications: • Precision turning • Model making • Machining of small metal parts • Mechanical workshops

Condition: good (used), Year of construction: 2013, Sorter for Light Loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 Trays, with 261 Target Configuration – Used – : Sorter price incl. control system: ex-works: €99,500 (net), including dismantling, packaging and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Model: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control system: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6,000 trays/h Total system length: 53 m Total system width: 14 m Number of induction stations: 1 Induction station width: 2 m Number of trays: 200 pcs Usable size per tray: 450 x 700 mm Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 pcs Product dimensions (L/W/H): Sorter: min.: 150 / 120 / 10 mm max.: 600 / 400 / 200 mm Weight: min.: 0.25 kg / max.: 5 kg No longer available: the roller conveyors, pick-by-light system, flap elements. There were two targets per sorting station, sorted into the upper or lower target roller conveyor via tilting chutes. Total number of targets on the sorter: 261 targets in the system. Number of targets for special purposes (overflow, reject, etc.): 3 pcs. A pick-by-light system is installed on the target roller conveyor. Isdjwxu A Repfx Amysat This means all components installed downstream of the trays after discharge are no longer present and are therefore not part of the sale! Condition: good Available: immediately Location: warehouse in Frankenberg/Saxony Detailed description available on request as PDF (in English).

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Isdsx A Ia Iepfx Amyeat

Condition: like new (used), Year of construction: 2009, operating hours: 35 h, functionality: fully functional, Plug and play. Very low usage, fully equipped mobile dry ice production plant: • "Production HUB with Triventek PE80 pelletizer 80 kg/h" (Denmark) installed in a portable container, complete with lighting. Iodpfx Ajy R I Tmemyeat • ISO CO2 tank 8m3, portable and mounted on a frame, manufacturer: Wessington Cryogenics Ltd, England. • 3 pcs thermal containers, each with 200 kg capacity New price €250,000 • All equipment manufactured in 2009, but with extremely low hours (only 3 tons of dry ice produced in total). Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice production machine for sale, dry ice blasting machine for sale, buy dry ice blaster, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasters, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice