Used Soldering for sale (103)

Condition: used, Year of construction: 2023, 2 systems available, one 2019 and 2023. Kodpfxowcrdts Adwewt Ask for additional information!

Year of construction: 2002, condition: ready for operation (used), A soldering system SMT with pin chain conveyor for the printed circuit board industry is available. Temperature: 300°C, heating time: approx. 30min, convection zone: 1660mm, cooling zone: 1030mm, process length: 2780mm, usable width range: 10mm-460mm, clearance height top/bottom: 30mm/30mm, max. speed: 1.8m/min, machine dimensions X/Y/Z: approx. 3300mm/1350mm/1550mm, weight: approx. 1100kg, operating hours (estimated): approx. 55000h. Documentation available. An on-site inspection is possible. Expected to be available from Q1 2026. Kwodpfjxn Aatjx Adwjt

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Kjdpfx Adoxp H Ttjwowt Model: V250 (Bofa) | WLA250 (Weidinger) Voltage: 230V (50Hz) | 1.1A Including power cable.

Year of construction: 2019, condition: used, 0 300 x 300 x H50 mm process temperature 100 - 260 °C cycle time 6 min. total power requirement 2,00 kW weight of the machine ca. 0,10 t dimensions of the machine ca. 0,60 x 0,60 x H0,60 m The main target areas of application for the vapor phase soldering system VP 310 series are labs, and prototype and small series manufacturing operations. Due to the compact dimensions and the fact that no stationary supply systems are needed for operation, it is perfect for troublefree application at Kwsdpfexh Nu Rsx Adwet many different sites. 240V power supply are all that is needed. Typical application areas - Lab usage for qualification and test of soldering processes - Secure SMT reflow soldering of single PCB assemblies - Quality control and assurance of soldering pastes and printed circuit boards - Rework and repair of PCB assemblies with safe and reliable desoldering and resoldering of components.

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Ksdpfx Adsn Htktjwswt

Year of construction: 2017, condition: used, functionality: unexamined, SMT reflow oven Condition as follows: - Transport OK - Needs cleaning - Basic functionality OK - Forced cooling not tested - Seals should be replaced and a new lambda probe is required Immediately available Ksdpfx Adjxbp Nbewewt

Year of construction: 2016, condition: used, MYCRONIC MY600JP Solder paste jet printer Year of construction 2016 JPSys version: 2.6.3.0 Kjdot E Srajpfx Adwowt

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Ksdpjxdantjfx Adwjwt

Year of construction: 1997, condition: ready for operation (used), Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 31,000W, total connected load: 18.5kW, compressed air connection: R 1/4 inch (6 bar), nitrogen connection: R 1/4 inch (6 bar). With microprocessor control PCS 96, alphanumeric display & membrane keypad (16 lines of 40 characters), 100 soldering programs, interface for host computer with visualized machine overview & BDE data backup, interface for BDE data acquisition via serial printer, control loop for transport and heating. Length: 2300mm, width: 825mm, height: 1615mm, weight without solder filling: 400kg. Kodpfx Ajw Uk Aqjdwswt

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Kedpfx Adeud Svzswswt

Year of construction: 2010, operating hours: 63 h, condition: used, functionality: fully functional, incl. Chilly 45-S cooling unit Kwjdpfx Adswtnxzswot

Year of construction: 2019, operating hours: 46,318 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 19051296729, No minimum price – guaranteed sale to the highest bidder! EQUIPMENT - Fixed double-lane pin chain conveyor module - Gripper head with rotation and tilt function - Workpiece carrier EDH-ER + G08 - Double preheating cassette, 8 × quartz radiators - Pyrometer control for quartz preheating Additional equipment details can be found in the attached PDF. Operating hours: 46,318 (as of 10.07.2025) Further information according to manufacturer – without guarantee. TECHNICAL DETAILS - Repeat accuracy: ± 0.1 mm - Rotation function: 0–270° - Soldering angle adjustment: 0–12° by tilting the gripper - Max. workpiece size: 500 × 500 mm - Max. solder tip temperature: up to 350 °C MACHINE DETAILS - Rated voltage: 230/400 V - 50 Hz - Rated power: 18,000 W Dimensions & Weight Installation dimensions (W x D x H): 2,170 x 2,110 mm Nitrogen and compressed air connections - Nitrogen connection: R 1/4″, min. 4 bar - Nitrogen consumption (single nozzle): approx. 1.5–2.0 m³/h - Recommended nitrogen value: 5.0 - Compressed air connection: R 1/4″, min. 6 bar - Exhaust: 1 × 500–600 m³/h Kwjdpfxjwzu Uro Adwot Commissioning note: The machine must be connected to the manufacturer via VPN once in order to reactivate the control system.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Kwedpev Ta Hlefx Adwst Lifting and lowering station Spray fluxer Dynamic preheating at the bottom Convection heating

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics. Ksdpfoxtfqxjx Adwjwt

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Steel and metal bandsaw machine / Brand: MÖSSNER REKORD / Type: SSF 801 / Year of construction: 1972 TECHNICAL DATA: - Roller diameter: 800 mm - Outreach: 785 mm - Maximum clearance height: 720 mm - Working table: can be swiveled on two sides Swivel range: right: approx. 45°, left approx. 10° - Band saw length: min. 5.650 mm, max. 5.800 mm - Saw band width: 10/20 mm - Cutting speed range, stepless: 15 - 940 m/min in 3 cutting speed ranges: I: 15 - 79 m/min II: 67 - 305 m/min III: 207 - 940 m/min IV Rapid speed: 4.000 m/min - Drive: 11kW - Power supply unit: 500 V, 50 Hz - Machine weight: approx. 2,3 tons - Space requirement (width x height x depth): approx. 1,6 x 2,9 x 1,9 m Additions / accessories: - Hot-knife cutting: For hot-knife cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25 - 30 mm, the machine has a direct high gear with a cutting speed of 3.000 or optionally 4.000 m/min. - Band filing device - Belt grinding device - Circular cutting device: The circular cutting device is attached to the guide arm directly above the clamping plate. With its help, circular saw cuts from 40 - 290 mm radius can be made. - Choice of saw bands Minimum radii that can be cut: Radius: Band width: 6 mm 3 mm 10 mm 4 mm 17 mm 6 mm 30 mm 8 mm 45 mm 10 mm 140 mm 16 mm The number of teeth on the saw band depends on the types and thicknesses of the materials to be cut. Steel: 5 - 20 mm material thickness 14 Z" over 20 mm " 8 - 10 Z" under 5 mm " 18 - 22 Z" Gray cast iron: 5 - 20 mm " 10 - 14 Z" over 20 mm " 6 - 8 Z" Brass, copper, zinc: over 5 mm " 8 - 10 Z" under 5 mm " 10 - 14 Z" Aluminum and plastics: over 5 mm " 7 - 10 Z" Soft solder: 8 - 14 Z" Kwjdjvx Hugjpfx Adwot - Saw guides The machine has two different saw guides: * 1 x precision saw band jaw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8 and 10 mm saw band width. * 1 set of guide rings for 20 mm wide saw blades for working with metals and plastics at higher cutting speeds and for hot cutting. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: used, Empty weight: 75 kg - Documentation available: No - CE certificate present: No Kwjdpsybb D Sjfx Adwjt - Transport weight [kg]: 75kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Precision metal lathe TYTAN 750S 230V with spindle speed control on a DC voltage converter (inverter). Operating parameters: turning diameter 220 mm, turning length 750 mm, 1 kW motor at 230 V. The machine is designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking and reaming holes. Ideal for use in small production plants, workshops or garages. Machine description The TYTAN 750S 230V universal lathe, thanks to the smooth adjustment of the spindle speed, is an ergonomic machine that responds to the needs of the user. Reducing the time for setting the machine when machining parts with a wide range of dimensions translates into efficiency and ease of use. Version S - electronic and stepless spindle speed control, via a DC motor and voltage regulator. This ensures the best rotational accuracy of the lathe chuck, which gives better quality of machining of the manufactured elements. Main advantages: Modern DC motor with smooth spindle speed control ensures comfort of use and shortens calibration time. LCD screen – with spindle speed display allows you to control and quickly modify spindle speed when setting cutting and threading modes. Two ranges of spindle speeds: reduced (50-1125) for machining hard steels and increased (100-2500) for precision turning at high speeds. Cut threads – metric - 12 degrees (0.4-3.5), inch - 12 degrees (8-44), possibility of cutting left and right threads. Automatic feed – in compliance with EU directives (CE) and Polish regulations and DIN standards. The machine is fully compliant – easy and convenient machine operation. Kodpfsv Uplasx Adwjwt Machine base optionally available Technical parameters Turning diameter over bed 220mm Turning diameter over cross slide 110mm Spacing of fangs 750mm Bed width 100mm Hole through the spindle 38mm Cone at the end of the spindle MK5 Number of spindle speeds liquid Spindle speed range 50-2500 rpm Number of metric threads 12 Metric thread range 0.4~3.5mm Number of English (inch) threads 12 English (inch) thread range 8-44 threads per inch Longitudinal feed range 0.15 - 0.25 mm/rev (2) Maximum travel of the chuck slide 70mm Maximum travel of the cross slide 80mm Maximum longitudinal carriage travel 630mm Tailstock sleeve travel 60mm Taper in tailstock spindle MT2 Main engine 1000W Tailstock bearing liner travel distance 60mm Tailstock sleeve end MK2 Main engine 1000W Dimensions L/W/H (without base) 1250x380x1100mm ​ Weight (without stand) 95kg standard equipment 3-jaw chuck (125 mm) Fixed and movable rest Change wheels MK2 permanent fang MK4 permanent fang Lubricator Shavings tub Chuck and chuck key Complete set of service tools Safety guards compliant with CE standards User manual in Polish CE Declaration of Conformity optional equipment Machine base Set of lathe knives 12 x 12 (11 pcs. with soldered plate) MK2 live center MK2/B16 drill arbor HSS-CO5 Cobalt Drill Bit Set / 1-13 Universal cooling system Emulsifying oil, cutting fluid ES-12 1L

Condition: good (used), Year of construction: 2008, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, small dust collectors, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, mobile welding fume extraction system type 62150 Kwsdpfx Adsx Swkkswjt -Drive: 1.5 kW -Volume flow rate: 1000 m³/h -Extraction arm: Ø 155 mm x 4200 mm -Transport dimensions: 770/690/H1455 mm -Weight: 186 kg

Year of construction: 2021, condition: used, Serial number: mz20210422xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21665 Specifications: 2021 model Weight: 1011 kg S60 attachment Ready for delivery Kwsdpfx Adexq Dmmowot Description: We have a 2021 Hardlife 100-SC-NL Hydraulic Solder Bucket w/ S60 Attachment for sale. Everything works as it should and the drawer has been used little according to the owner. Ready for delivery Own weight: 1011 Model: 100-SC-NL hydraulisk soldeskuffe m/ S60 feste

Condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Esta: Small dust extractor OM-8 -Drive: 0.37 kW -Extraction arm: 3400 mm -Dimensions: 500/1330/H1550 mm -Weight: 76 kg Kedpefkzbdefx Adwjwt

Condition: used, Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys Kedpfx Ajcbkkbjdwswt -Net weight: 10.9 kg -Number: 1x package available -Price: per package -Weight complete: 11.5 kg/package

Condition: good (used), Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h Kwodjpxq Ugopfx Adwjt -Dimensions: 425/420/H845 mm -Weight: 35 kg

Condition: used, Year of construction: 2010, Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor Kodpfx Aerzvw Tedwewt -Manufacturer: Euromate, mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg

Year of construction: 2012, condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Manufacturer: Kemper, mobile welding fume extractor type 82150 -Drive: 1.5 kW -Volume flow: 1000 m3 / h -Extraction arm: O 160 mm x 4200 mm Kedpjhmqm Ijfx Adwjwt -Transport dimensions: 655/910/H1470 mm -Weight: 194 kg

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction Kodpfeqwprgsx Adwewt -Type: "Fumatech" MF 1100 -Drive: 1.1 kW -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm -Weight: 84 kg