Used Solvent Recovery for sale (1,022)

Condition: used, mileage: 3,45,779 km, power: 368 kW (500.34 HP), first registration: 11/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, Chassis and Powertrain: * Engine: D2676LF51, 500 hp / 368 kW, EURO6 SCR, 2500 Nm * Transmission: MAN TipMatic® 12 28 OD with Profi software (for on-road use) * Front axle: VH-09, hydrostatically driven (MAN HydroDrive) * Rear axle: AP HP-1352, differential lock ----Cab and Comfort: * Cab 'L', 2240 mm wide, 2280 mm long, raised by 80 mm * Driver's comfort seat: air-suspended, lumbar support, shoulder adjustment, seat heating * Passenger seat: static, longitudinally, backrest, and height adjustable * Storage box accessible from inside and outside * Sleeper cab with storage space and mattress underneath * Air conditioning with automatic temperature control (CFC-free) * Auxiliary heater EBERSPÄCHER D4S * Interior design in sand color, carpet on the engine tunnel * Cool box under the sleeper cab, fully retractable * Electric windows, central locking with remote control * Multifunction steering wheel, instrument panel km/h 'High-Line colored' ----Safety and Assistance Systems: * Electronic Braking System (MAN BrakeMatic) * Emergency Brake Assist 2 (EBA2, non-deactivatable) * Anti-lock Braking System (ABS), Anti-Slip Regulation (ASR) * Electronic Stability Program (ESP) * Lane-Guard System IV (LGS IV) * Adaptive Cruise Control (ACC) Gkodpfj Adm Tyox Adkjd * Emergency Brake Signal (ESS) * Basic safety package * Disc brake front, drum brake rear ----Electronics and Communication: * Digital tachograph (CONTI), preparation for remote download * MAN Tronic (on-board computer), connectivity board module (RIO Box) * Radio MAN Media Truck Advanced with 7" color display * Navigation SD card Europe * Hands-free function for 2 mobile phones (Bluetooth®) * AUX-in/USB in the dashboard * TollCollect pre-equipment ----Lighting and Visibility: * Halogen double headlights H7, LED daytime running lights * High and low beam headlights with cornering lights * 2 work lights on the cab roof * Interior lighting red/white, reading lights for driver and passenger * Sun visor and sunblind, tinted windows * Mirrors electrically adjustable and heated, curb mirror, EU front mirror ----Other Equipment: * Air suspension rear (ECAS), parabolic springs front * Work platform with step and handrail * Stabilizers on front and rear axle * Jack 12 t, fire extinguisher, first aid kit, warning triangle, hazard warning lights * Various storage compartments, cup holders, drawer in the dashboard * Decorative trim brushed aluminum on the dashboard ----* Fifth wheel coupling JOST JSK 37 C, overall height 250 mm, fifth wheel size 585 mm * MEILLER hydraulic system ----* Tire dimension: 315/80R22.5 * Fuel tank: 390 liters * AdBlue tank: 60 liters * Technically permissible gross weight: 20500 kg * Tare weight: * Permissible trailer load: * Overall length: * Wheelbase: 3600 mm * Next inspection due: ----Vehicle number/Vehicle: 12631----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge: ----Trade-in of your old vehicle TÜV/main inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460042, Technical Specifications: # Machining Area: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexable divider head, featuring direct angular measuring system, rotational speed up to 50 min⁻¹, accuracy +/- 5” # Maximum Part Clamping Dimensions: Ø 575 x 830 mm; Maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1-17,500 rpm # Spindle Taper: DIN69893-HSK-A63 (with internal coolant) # Automatic Tool Changer: 2 x 32 tool positions / chip-to-chip average 2.5 seconds # Maximum Tool Diameter: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Connection: Gjdpfjxwvlnox Adkekd # Voltage: 3x400V/50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Extractor: Knoll Type 550 K-1 # Oil Cooling System # Oil Filtration System, max 80 bar: Knoll 550 K-1 450_2450 (can serve 2 machines simultaneously) # Shaft, Guideways, and Switchboard Cooling System # 2 Oil Lubrication Units # Oil Vapor Absorption/Recovery Unit: IFS Vario E2000 (2,000 m³/h) # Fire Suppression: Kraft & Bauer # Part Presence P/Y: low pressure air detectors # In-process Gauging: Marposs T25 # Tool Breakage Detection System: BRK and length check via inductive sensor # Tool Support Detection System in Working Spindle # Documentation: Only manuals available Machine Condition: Fully operational

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460065, Technical specifications: # Machining Workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotational table axis (A) and 2 rotational axes (B) with indexer head - Direct angular measuring system, maximum rotational speed: 50 min⁻¹, accuracy: +/- 5" # Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum workpiece weight: 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle taper: DIN69893-HSK-A63 (internal coolant supply) # Automatic tool changer: 2x32 tools, chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / max. length 275 mm / 7.5 kg Gkodpjxw Ttijfx Adkjd Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring device: Heidenhain linear scales # Chip conveyor/extractor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max 80 bar: Knoll 550 K-1 450_2450 (can service 2 machines simultaneously) # Shaft cooling system, guideways, and control cabinet # 2 oil lubrication units # Oil vapor absorption/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire protection: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process control: Marposs T25 # Tool breakage monitoring and length measurement: inductive sensor # Toolholder detection system in working spindle # Documentation: Manuals only (printed) Machine condition: Operational / In working condition.

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-06, Technical Specifications: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + 1 rotary axis (rotary table A) and 2 rotary axes (B, indexer head) with direct angular measuring system, maximum 50 rpm, accuracy +/- 5 seconds # A axis swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1–10,000 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max tool diameter: Ø82 mm / max. length 250 mm / 5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation area: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Powerline # Chip conveyor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, max. 80 bar: Knoll HL 450/1200 # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery: LTA AC3002 # Fire protection: Kraft & Bauer # Presence detection: with low pressure air sensors (part present) # In-process control: Marposs T25 # Tool breakage monitoring: Blum Novotech # Tool presence detection system in spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Cover for tool magazine Gsdoxxivcepfx Adkskd # Tool magazine presence sensor (BERU)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-89, Technical characteristics: - Machining workspace: X 550 mm; Y 400 mm; Z 360 mm - Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary divider head axes B, equipped with direct angular measuring system, max rotation speed 50 rpm, accuracy +/- 5" - Axis A swivel range: +/- 110° - Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg - Rapid traverse rate: X/Y/Z 40/40/40 m/min - Distance between divider heads B1/B2: 250 mm - Spindle speed: 1–10,000 rpm - Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) - Automatic tool changer: 1x48 positions / chip-to-chip average 2.5 sec - Max. tool diameter: 82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical specifications: - Supply voltage: 3x400V/50Hz - Installed power: approx. 45 kVA / 80A Dimensions: - Installation space: approx. 4.4 x 2.3 x 3.1 m - Weight: approx. 8,500 kg Equipment includes: - CNC control: Siemens 840D Power Line - Chip conveyor: Spring Knoll - Oil cooling system - High-pressure oil filtration system (max. 80 bar): Knoll HL 450/1200 - Shaft cooling system, guideways and control cabinet - 2 oil lubrication units - Oil mist extraction/recovery: LTA Gedpfx Ajxxi Rmjdkjkd - Fire protection: Kraft & Bauer - Part presence P/Y detection: with low-pressure air sensors - In-process inspection: Marposs T25 - Tool holder presence detection in spindle - Documentation: incomplete Machine status: NOT OPERATIONAL: Hydraulic power unit motor burned out.

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 2560001, Technical specifications: # Machining workspace: X 600 mm; Y 525(890) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis (A, rotary table) and 2 rotary axes (C, indexer head) with direct angular measurement system, 50 rpm, accuracy +/- 5 arcseconds # Maximum clamping/part dimensions: Ø 600 x 1420 mm; max weight 600 kg # Rapid traverse speeds: X/Y/Z 50/60/50 m/min; positioning accuracy Tp: 0.02 mm # Distance between spindles: 600 mm # Spindle speed: 1–6000 rpm # Spindle taper: DIN69893-HSK-A100 (with internal coolant supply) # Automatic tool changer: 2 x 20 tools, average chip-to-chip time 4.25 s Gsdpfjxxkd Ujx Adkjkd # Tool maximum: Ø75 mm / length max. 275 mm / 7.5 kg Electrical specifications: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space (W x H x L): approx. 5.8 x 3.3 x 5.05 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring devices: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # High-pressure oil filtration system, up to 80 bar: Knoll KF200/1200 # Shaft, guideway, and electrical cabinet cooling systems # 2 oil lubrication circuits # Oil mist absorption/recovery system # Tool breakage and length measurement: Blum Novotec # Work spindle tool presence detection system Machine condition: NOT OPERATIONAL # Automatic operator doors # Tool magazine # Axis protection covers for work area # Z-axis ballscrew and # Z-axis linear guides # Hydraulic overheating # Hydraulic pump (250 bar)

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: P177ZG753, Technical characteristics: # Machining Workspace: X 500 mm; Y 400 mm; Z 330 mm # Axis Description: 3 LINEAR AXES (X, Y, Z) + 1 rotary table axis (A-axis) with index dividing head, direct angular measurement system, number of revolutions 50 min⁻¹, accuracy +/- 5" # A-axis Swivel Range: +/-170˚ # Maximum Clamping/Workpiece Dimensions: 650 x 400 mm; max. weight 300 kg # Rapid Traverse: X/Y/Z 54 m/min # Spindle Speed: 100–10,000 rpm, spindle motor power 11 kW # Spindle Taper: BBT30 (with internal cooling) # Automatic Tool Changer: 1x21 tools, chip-to-chip average time 1.5 sec # Maximum Tool Size: Ø40 mm / length max. 200 mm / 2 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 20 kVA / 22A Dimensions: # Installation space: approx. 1.65 x 3.2 m (with chip conveyor) x 2.8 m # Weight: approx. 8,500 kg Equipment includes: # This 4-axis FANUC Robodrill α-D21LiB5 was manufactured in 2016. Ideal for precision machining, this vertical machining centre offers robust performance and reliability. # CNC Control: Model 31i model b5 # 4th axis and tailstock: Fanuc DDR-TiB 178DU039 2017/08 and TSUDAKOMA tailstock # Chip extractor & coolant filtration unit max. 40 bar: Mosnic model 1641/2010 # Spindle, Guideways, and Electrical Cabinet Cooling Systems # Oil Vapor Absorption/Recovery System: Bristol model B 1000 EF # Fire suppression: Kraft & Bauer # Part presence detection: with low pressure air sensors # Automation: Lateral door automatic and interface ready for automation # In-process inspection: Renishaw TRS2 # Documentation: incomplete Machine condition: NOT WORKING # Hydraulic unit defective # Two emulsion pumps # Guideway lubrication pump # Safety switch Euchner Gedpfx Adoxxt Ehokskd

Condition: used, Binder Type: BD 115 Key Features Model BD 115 | Standard incubator with natural convection Technical Data BD 115 External Dimensions: Width (net) 835 mm Height (gross, including feet/castors) 705 mm Depth (net) 645 mm Depth (gross, including door handle and exhaust pipe) 750 mm Wall Clearance (rear, minimum) 100 mm Wall Clearance (side, minimum) 160 mm Exhaust Pipe, Outer Diameter 52 mm Doors Number of Doors 1 Internal Dimensions: Width 600 mm Height 480 mm Depth 400 mm Internal Volume 115 liters Steam Chamber Volume 142 liters Drawers Number of Drawers 0 Maximum Number of Drawers 5 Maximum Load per Drawer 20 kg Permissible Total Load 50 kg Weight (empty) 61 kg Temperature Data Temperature Range, 5°C above ambient temperature to 100°C Temporal Temperature Deviation at 37°C ± 0.1 K at 50°C ± 0.1 K Spatial Temperature Deviation at 37°C ± 0.4 K at 50°C ± 0.8 K Heating Time to 37°C 70 minutes to 50°C 90 minutes Recovery Time after 30 sec door open at 37°C 10 minutes at 50°C 12 minutes Electrical Data: BD115-230V IP 20 Rated Voltage (+/-10%) at 50 Hz mains frequency 230 V Rated Voltage (+/-10%) at 60 Hz mains frequency 230 V Type of Current 1N~ Rated Power 0.20 kW Gkjdpezgaicjfx Adksd Condition: used Scope of Delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 08/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * TGE 3.180 4X2F SB Panel Van * 8-speed automatic transmission, front-wheel drive * Reinforced suspension/damping and reinforced stabilizer bars * Disc brakes front, 16" * "ergoActive" driver's seat with suspension * "Comfort" passenger seat * Seat covers in synthetic leather "Mesh" * Heated driver and passenger seats, separately adjustable * Stone chip protection without Efficient Line (no CO2 optimization) * Comfort Package Plus * Daytime running lights with assistant driving lights * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Fog lights incl. cornering light * Side marker lights * Heated windshield washer nozzles front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting * Headliner in the passenger compartment as a molded headliner * Entry handle made of plastic on the B-pillar in the passenger compartment * Child safety lock, electrically operated * Side interior paneling in the cargo area made of hard fiberboard, half-height, with partial window paneling * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assist front and rear * Cruise control * Traffic sign recognition Gsdpfezc Dgxsx Adkskd * Rear view camera system with dynamic guide lines * Driver alertness and fatigue detection * Side wind assist * Active lane keeping assist * Intelligent speed assist * With multifunction camera * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and KFG with ABH programming * Alternator 230 A * Air conditioning system "Climatic" in the cab * 2nd battery (AGM battery) with separator relay and battery monitoring * 2nd heater and 2nd evaporator * One towing eye front * Trailer hitch, fixed * Wheelbase standard 3,640 mm (L3) * Mud flaps front and rear * Fuel tank 75 l * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony with inductive charging function, without external antenna connection * Fire Red (R3000) * Exhaust system, EU6e (EC) * Front-wheel drive * 4-cylinder diesel engine 2.0L, aggregate 03N.G * Automatic transmission, 8-speed * 4-cylinder turbo diesel engine 2.0 l/130 kW (4V) BIT * Start-stop system with brake energy recovery * Country cluster "WLTP EU approval" * Airbags for driver and passenger, with passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Safety interior mirror, anti-glare * Leather multifunction steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners front * 12-V sockets in the cab * Belt warning system, E-contact in the belt lock, driver and passenger seat * 2 remote key fobs * Keyless start * Auxiliary water heater, with remote control * Chrome package * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * Exterior mirrors, electrically adjustable and heated * Exterior mirrors left and right convex, with integrated LED turn signal and wide-angle area * High roof, painted in vehicle color (H3) * Rear step, over half the width

Condition: used, mileage: 30,000 km, power: 130 kW (176.75 HP), first registration: 07/2023, fuel type: diesel, next inspection (TÜV): 12/2024, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,051 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Exterior mirrors, electrically adjustable and heated * Double passenger seat on the right with storage compartment and folding backrest with stowage table * Air conditioning with manual control in the cab * Seat covers in fabric, "Austin" design * Central locking with remote control and interior operation * 2 USB ports (Type C) in the dashboard * 4 speakers: 2 tweeters, 2 woofers * Car-Net App-Connect * Mobile phone interface * Multifunction display "Plus" * Radio "Composition Colour" with a 16.5 cm (6.5 inch) touch display * Airbag for the driver * Hill start assist * Electronic stability program and ABS * Cruise control system incl. speed limiter * Engine start-stop system with brake energy recovery * Emergency call system eCall * Rear view camera "Rear View" * Side wind assist * Daytime running lights * 12V socket and 4 cup holders in the dashboard * 4 steel wheels 6.5 J x 16 with 1,050 kg load capacity, in silver * 4-cylinder turbo diesel engine 2.0 L / 130 kW (4V) TDI, basic BIT common rail engine: TK1/TK4/T4G/T6X * 6-speed manual transmission * Emissions standard Euro 6d ISC-FCM * Trailer hitch, fixed (incl. trailer stabilization) * Exterior mirrors on the left and right, convex, with integrated LED turn signal and wide-angle area * Battery 520 A (92 Ah) * Component set without country-specific construction regulations * Lighting in the cargo area: 2 spotlights * Operating permit addendum * Operating voltage 12 V * Floor covering in the cab made of rubber * Alternator 140 A * Three-point automatic seat belts with height-adjustable belts in the front and electric belt tensioner for the driver * One towing eye in the front * Vehicle registration with a permissible total weight of 3.5 t * Glove compartment with lockable flap, illuminated * Premium interior noise damping measures * Panel van Plus, 4-seater bench seat in the 2nd row of seats with integrated plastic partition * Child safety lock in the passenger compartment * Fuel tank with 75 l tank capacity * Radiator protection grille, unpainted * LED headlights with LED daytime running lights * LCV version with up to 7 seats * Radio "Composition Colour" with 4 speakers * Long wheelbase (LR) - 4,490 mm * Tires 235/65 R 16 C 115/113 R, optimized for rolling resistance * Disc brakes in the front, 16" (diameter 303 mm) * Sliding door, right, in the cargo/passenger compartment, with intermediate locking for opening limitation * Suspension seat "ergoActive" left, in the 1st row of seats * Security & Service (with OCU) Gkedpfx Ads Af D R Sekod * Side windows in the front and rear and rear window in heat-absorbing glass (if available) * Service indicator 50,000 km or 2 years (variable) * Special equipment through "Customized Solution" * Stone chip protection for the front underbody * Laminated windshield in heat-absorbing glazing * Tie-down eyes for securing the load * Prepared for "We Connect" and "We Connect Plus" * Preparation for 4-seater bench seat, in the 2nd row of seats * Front axle, reinforced (axle load 2,100 kg, with twin tires 2,200 kg) * Approved as a truck with an N1 approval (up to and including 3.5 t permissible total weight) * Permissible total weight 3,500 kg * Electrical connection terminal and preparation for function control unit

Condition: used, mileage: 3,42,555 km, power: 315 kW (428.28 HP), first registration: 09/2015, fuel type: diesel, empty load weight: 14,000 kg, maximum load weight: 18,000 kg, overall weight: 32,000 kg, axle configuration: 8x2, wheelbase: 5,800 mm, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, Sleeper cab, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, auxiliary drive, frame fairing, differential lock, fog lights, tool compartment, leaf/air suspension, last axle liftable and steerable, trailer coupling air/light/hydraulic, 2-axle front axle steering, U-shaped protection, hydraulic cross-locking, sunroof, green environmental badge. Wheelbase: 5800 mm, Body: Nencki roll-off system with push and swivel hook for containers up to 7.5m, 9t front axle, rear axle bevel gear 440 hypoid 13t, 7.5t front axle steerable/unloaded, 7.5t rear axle steerable/unloaded/liftable, electronic braking system with ABS and ASR, disc brake on front and rear axle, secondary water retarder, stabilizer front axle, additional stabilizer rear/trailing axle, front underrun protection made of aluminum, smoker's package, waste heat recovery, PSM, communication interface (KOM), hill start assist, reversing warning, ClassicSpace, comfort locking system, Power driving program, Mercedes PowerShift 3, LED daytime running lights, transmission oil cooler, auxiliary drive MB 131-2c pump, engine drive rear c hydraulic pump ISO 7653D. Roller height approx. 1130mm! Gjdpfj Ag Tmzsx Adkskd The vehicle received a replacement engine in 2021 at 221,600 km! The retarder was renewed in 2018! Operating hours: 12,928 h Matching crane container -9462- available at an additional cost of €29,900.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Overall weight: 1,200 kg, construction height: 695 mm, total length: 2,425 mm, total width: 1,360 mm, total height: 695 mm, battery capacity: 100 Ah, load capacity: 1,000 kg, battery voltage: 24 V, condition: used, Year of construction: 2020, functionality: fully functional, control type: PLC-controlled, drive type: electric, maximum speed: 4 km/h, operating speed: 1,200 mm/s, reverse speed: 1,200 mm/s, brakes: engine braking, conveyor belt length: 1,701 mm, conveyor belt width: 1,380 mm, Equipment: documentation/manual, emergency stop, Logistics FTF / AGV with Roller Conveyor For sale are ten compact, driverless transport vehicles (FTF/AGV) from the manufacturer DS AUTOMOTION. These vehicles were used for automated in-plant material transport and are equipped with an integrated roller conveyor for the automatic pick-up and transfer of transported goods. The FTFs feature automatic operation with a central control system and can also be moved manually via a hand control for service and shunting operations. Thanks to their compact design, integrated roller conveyor, and safety technology, these vehicles are particularly suitable for automated material flow and logistics applications. • Manufacturer: DS AUTOMOTION GmbH • Type: Logistics FTF / AGV, smaller design • Quantity available: 10 units • Load capacity/payload: approx. 1,000 kg • Vehicle dimensions: approx. 2,425 × 1,360 × 695 mm • Length of roller conveyor on the FTF: 1701 mm • Width of roller conveyor on the FTF: 1380 mm • Weight including battery: approx. 1,200 kg • Load handling device: integrated roller conveyor • Roller conveyor height: approx. 475 mm • Max. forward/backward speed: 1.2 m/s • Max. lateral/turning speed: 0.3 m/s • Max. acceleration/deceleration: 0.4 m/s² • Drive: 2 drive units + 3 non-driven support wheels • Brakes: with energy recovery/regeneration • Operating modes: automatic and manual operation Gkodpfx Adj Ad Hhkokod • Operation: vehicle terminal and hand control • Communication: WLAN / connection to a central control system • Navigation: path-based with magnetically assisted position correction • Safety: personnel protection scanner and emergency stop • Battery: removable from the underside of the vehicle • Load handling device: detachable and height-adjustable • Interface to the load handling device: CAN bus via connector plates • Recovery: drive units can be lifted for towing • Documentation: operating/vehicle documentation available If you have any questions or require further information, please send us a message or call us.

Condition: used, mileage: 1,16,700 km, power: 460 kW (625.43 HP), first registration: 05/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2027, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Long-distance cab BigSpace with a flat floor and 2 beds, secondary water retarder, automatic climate control, hot water auxiliary heater, waste heat recovery, comfort driver and passenger seats with air suspension and heating, seat upholstery in leather, driver airbag, electric windows 2-way, Mirror-Cam (camera-based exterior mirrors), LED ambient lighting, sun visor exterior, sun blind windshield, electric, sun blind side, driver and passenger side, sliding/lift roof electric, glass version, roof and side spoilers, electronic braking system with ABS and ASR, high-performance engine brake, turbocompound, parking brake electronic, disc brakes on front and rear axles, safety package "Top" with Active Brake Assist 5, stability control assistant (ESP), lane keeping assistant, distance keeping assistant, attention assistant, traffic sign assistant and turning assistant (BlindSpot), 12-speed MB gearbox G 330-12 / 11.63 - 0.77 with PowerShift transmission 3, auxiliary drive single with 2-circuit tipping or sliding floor hydraulic system (switchable from low to high pressure), predictive powertrain control, 60 l AdBlue tank left, 290 l aluminum tank left, digital tachograph, LED main headlights, fog lights, LED daytime running lights, automatic high beam/low beam and cornering lights, work lights, LED taillights, illuminated Mercedes star, light and rain sensor, side marker lights flashing, LightFix roof bar with LED power bar and flashing lights yellow, air horns on the cab roof, multimedia cockpit, interactive (MBUX) with digital radio, navigation system, preparation for FleetBoard management, etc., multifunction leather steering wheel, Bluetooth hands-free system, comfort central locking with remote control, refrigerator, external storage compartment left + right, storage box left under the cab, front and rear axles with air suspension and lifting/lowering device, axle load measuring device, ALCOA Dura-Bright high-gloss polished aluminum rims, differential lock rear axle, fifth wheel coupling Jost JSK 37E with sliding device, drawbar coupling with 2-line braking system, GGW 26,000 kg, technically permissible total weight 68,000 kg, wheelbase 3250 mm, 1st owner, well-maintained in the workshop, ATS guarantee according to general terms and conditions, 3 years / 450,000 km, very good overall condition, original mileage (verifiable), not a rental vehicle! Euro 6E engine, low noise, German vehicle with German documents, not a low-liner and not a mega semi-trailer! Sale only to commercial businesses! All information without guarantee! Errors and prior sale reserved! Gsdpfo Agxtqox Adkekd

Condition: used, mileage: 5,19,563 km, power: 353 kW (479.95 HP), first registration: 08/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: mechanical, emission class: euro5, total length: 9,110 mm, total width: 2,550 mm, total height: 3,800 mm, loading space volume: 13 m³, loading space length: 6,000 mm, loading space width: 2,380 mm, loading space height: 917 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, The vehicles have been fitted with new engines!!!! Cab & Comfort Cab M (2240 mm wide, 1880 mm long) Gjds Agyahjpfx Adkskd * Air-suspended cab mounting * Comfort seat covers * Driver comfort seat, air-suspended, air-conditioned, heated, with lumbar support * Passenger seat, static * Instrument panel "Base-Line" * MAN Tronic on-board computer * Display languages: German & English * Adjustable steering wheel3 * Car phone antenna * CB radio antenna * Radio MAN BasicLine * Radio system * 12V/24V sockets in the cab * Hydraulic/electric cab tilting mechanism ----Heating & Climate Control Auxiliary heater Eberspächer D4S * Air conditioning with automatic control ----Brakes & Safety Engine brake EVBec * Flame starter system * Immobilizer * Emergency steering pump * Multifunction steering wheel * ABS * Drum brakes front and rear * Pneumatic parking brake, front ----Lights & Visibility Additional long-range and fog lights * Halogen twin headlights H7 * Headlight range adjustment * Work light, left * Position and marker lights * 2 halogen rotating beacon lights * Insect screen * Rotating beacon lights, yellow * Access steps on fenders * Entry lighting * Reading lights * Cargo area lighting * Central locking * Electric two-tone horn * Heated and electrically adjustable mirrors ----Safety Reversing warning, can be switched off * Electronic speed limiter 89 km/h * Cruise control * Boost pressure indicator ----Engine & Transmission Engine D2676LF07, 480 hp, EURO 5 SCR, 2300 Nm * Manual transmission ZF 16 S 252 OD * Front axle VOG'09 / VP'09, driven * Parabolic springs, front, 9.5 t * Water cooler & charge air cooler for high temperatures * Switchable front-wheel drive * Transfer gearbox G172 * MAN BrakeMatic * Rear differential lock * Front differential lock with warning buzzer ----Hydraulics & Body MEILLER axial pump 296/54 * PTO parameterization * PTO without flange * Tipper operation in the cab * Plastic fenders, MEILLER * Trailer coupling RINGFEDER 5050 A * ABS trailer socket * 24V 7+7-pin trailer socket * Folding underrun protection, rear MEILLER D421 three-sided tipper, 6000 x 2300 mm, floor 7 mm * Fixed corner posts * Side panels M-JET 4 mm * Side panels, 900 mm * Right side panel, oscillating (Bordmatik, left) * Front wall, 1100 mm * Deflector plate, 500 mm * Rear panel, 900 mm * Oscillating rear panel with automatic latch * Chute, 350 mm * Hydraulic connection for trailer operation, rear * Bordmatik, left ----* Tire size, front axle: 385/65R22.5 * Tire size, rear axle: 315/80R22.5 * Fuel tank: 400 liters * AdBlue tank: 35 liters * Technical total weight: 37000 kg * Unladen weight: 16050 kg * Permissible trailer load: 24000 kg * Overall length: 9110 mm * Wheelbase: 1795+2980+1400 ----Vehicle number/Vehicle: 11802+11798----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We are happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer the following services for an additional charge: ----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport YOUR VTS TEAM

Condition: repair required (used), Year of construction: 2001, functionality: not functional, machine/vehicle number: 1640137, Technical characteristics: # Machining workspace: X 400 mm; Y 450 (700) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 2 twin horizontal spindles + 2 rotary tables A1/2 NC (33.3 rpm), with hydraulic clamping mounted on indexable rotary table A3 (0 to 180° in approx. 4 sec). # Rapid traverse speed: X, Y, Z 1–40,000 mm/min # Positioning accuracy Tp: 0.01 mm # Distance between spindles: 400 mm # Spindle speed: 50–12,500 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x30 tool positions / chip-to-chip time 4.5 sec # Maximum tool diameter 75 mm / Maximum tool length 275 mm / 10 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 68 kVA Dimensions: Gsdpsxvyfvsfx Adkjkd # Installation footprint: approx. 6.35 x 4.5 x 4.2 m # Machine dimensions: approx. 4.6 x 3.0 x 3.0 m # Weight: approx. 13,800 kg Equipment includes: # CNC controller: Siemens 840C # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll 400K-1/950 RSF100 # Oil cooling unit # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil vapor extraction/recovery system # Tool presence detection system in spindle

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Gkedpfx Ajvuhumedkjd Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: new, Year of construction: 2026, Type designation and technical data The outstanding advantages: Space-saving compact design – comfortable and high-performance. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air guide plates – also suitable for larger workpieces. Separation rate for paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Simple and quick filter change on the front side. Cost-effective replacement filters. Low initial costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a post-filter unit. Ex-fan including throttle valve mounted on the left side. Do not compromise on the quality of the surface finish. Easy Paint extraction walls are the ideal, cost-effective solution for the effective capture and filtration of paint mist and the extraction of solvent vapors. Robust and high-performance, yet economical in consumption. Standard extraction capacity Easy Paint 3500 Article No. 600025 Airflow rate in standard configuration * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW Connection for extraction pipe D = 300 mm Width in mm 2750 Overall height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine available at a special price. Gedpfxjb R D U Se Adkekd

Condition: good (used), functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, total width: 600 mm, total length: 820 mm, total height: 1,600 mm, input voltage: 400 V, Used Liebert NX 40kVA / 32kW 3-phase UPS battery backup system (tested and includes good batteries) Rated power: 0.8 PF: 40 kVA Output power 32KW Battery Battery type VRLA 40x YUASA NPL24-12 I 12V 24 AH Width mm 600 Depth mm 825 Height mm 1600 Weight (approx.) without battery kg 341 Input Parameters Rectifier Type IGBT-based Vector Controlled PFC (PF Corrected) Input Voltage to Rectifier Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 3-w Input Voltage to Bypass Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Permissible Input Voltage Range for Rectifier Vac 305 to 477 Input Frequency Hz 50 or 60 Permissible Input Frequency Range for Rectifier Hz 40 to 70 Gkjdpfxot H Irlj Adkjd Input Current THD at nominal voltage % < 3* without any Filter Input Power Factor at nominal voltage ≥ 0.99* without any Filter Flexi Power Walk-In seconds 5 to 30 (selectable) Output Parameters Inverter Type IGBT-based Vector, Repetitive & PI Controlled Output Power kW 24 32 48 64 Output Voltage Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Output Voltage Regulation % +/- 0.5 (3-phase RMS average) Output Frequency Hz 50 or 60 Output Frequency Regulation % +/- 0.05 Output Voltage THD at nominal voltage % 1% (max) Capability to handle High Crest Factor Load 3 : 1 (compliant with IEC 62040-3) Capability to handle Step Load 0-100 or 100-0 Transient Recovery mseconds < 0.5 (recovery to 95% of the voltage level) 10 (recovery to 99% of the voltage level)

Condition: used, functionality: fully functional, machine/vehicle number: 33528, mileage: 1,79,900 km, power: 315 kW (428.28 HP), first registration: 02/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6d, suspension: steel-air, loading space volume: 13.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class FL and OX (including EX/II, EX/III and AT), weight variant 28 t, engine OM470, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, regulated water pump, gearbox lock for auxiliary drive, daytime running lights, trailer coupling Ringfeder (D40), tires: front axle 385/65R22.5, rear axles 315/80R22.5, fuel tank 290 liters + 60 liters AdBlue, length/width/height/mm: 9,100/2,550/3,550 Gkodpo Af Ux Uefx Adkjd Cab: ClassicSpace (width 2300 mm, tunnel 320 mm), tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, driver comfort suspension seat, passenger functional seat, multifunction steering wheel, reversing warning system combined with hazard warning lights, radio-Bluetooth with navigation, digital tachograph VDO, trip computer, 24 V socket in the passenger footwell, circuit breaker, battery main switch, pre-installation for toll collection, air conditioning, cruise control, attention assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Body: ADR with piston tank coding L4BH, total volume approx. 13.5 m³, usable volume sludge chamber approx. 11.5 m³, water chamber approx. 1.0 m³, tank wall thickness 6 mm, hydraulically opening full-height hatch with pneumatic hammer head lock (galvanized) and a suction connection at the bottom and top, suction connection for trailer operation at the rear left, 1 x piston lock, piston with 2 piston seals and seal pressure regulation, tank content indicator - scale division every 500 liters, tank content indicator of the water chamber made of plexiglass tube on the right side, impact protection for the tank at the rear, vacuum pump CVS Vacustar W1300L (1200 cbm/h) hydraulically driven, over-suction protection by 2 PVC balls, centrifugal separator with stainless steel brush insert and a stainless steel protective filter in front of the vacuum pump, high-pressure pump Speck NP 25/50-120 (approx. 50 l/min at approx. 120 bar) hydraulically driven, manually operated small winch with 40 m (designed for 60 m) HD hose DN13 and spray gun, filling device for the water chamber consists of a Storz-C coupling, 4 x LED work lights 2x on the right and 2x on the left on the tank, 1 x LED work light detachable and swiveling with 20 m cable, control cabinet made of stainless steel with louvered panel mounted on the right rear, discharge flap (aluminum), hose box on the right and left (aluminum), additional hose rests for hoses running around the tank welded to the tank lid, lockable plastic toolbox, waste container mounted at the rear (galvanized steel), ladder bracket and aluminum ladder, burst disc with pressure relief valves on the tank, 2 fire extinguishers, 15 m grounding cable, rotating beacon, trailer suction line, trailer hydraulics.

Condition: excellent (used), mileage: 31,506 km, power: 121 kW (164.51 HP), first registration: 06/2022, fuel type: diesel, axle configuration: 4x4, wheelbase: 4,040 mm, fuel: diesel, fuel tank capacity: 100 l, color: black, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: air, number of seats: 3, total length: 7,380 mm, total width: 2,090 mm, total height: 3,500 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,000 kg, loading space length: 4,800 mm, loading space width: 2,150 mm, loading space height: 750 mm, Equipment: ABS, air conditioning, central locking, electric window regulation, fog lights, navigation system, power mirror, - Low noise - Enclosed cab - Cab - Air suspension - Tool box General Information Number of doors: 2 Year of construction: 2022 License plate: VTF-27-N Technical Information Gkjdpfxezy Hyno Adked Number of cylinders: 4 Engine displacement: 2,179 cc Maximum front axle load: 1850 kg Rear axle: Max. axle load: 2000 kg; Suspension: Air suspension Weights Unladen weight: 2,080 kg Payload: 1,420 kg GVWR: 3,500 kg Functional Body manufacturer: VERHAEGH SPECIALS OPRIJWAGEN Loading platform height: 75 cm Maintenance, History and Condition APK (Technical Inspection): valid until 07/2027 Technical condition: very good Optical condition: very good CITROËN JUMPER CAR TRANSPORTER / TOW TRUCK VERHAEGH SPECIALS BODY • SUPERWINCH WINCH • AIR SUSPENSION • ONLY 31,406 KM Very nice and professionally built Citroën Jumper car transporter / tow truck, equipped with a high-quality Verhaegh Specials transport body. Due to the low loading platform height, the ramps, and the Superwinch winch, this vehicle is ideal for transporting cars, light commercial vehicles, machinery, and other equipment. The vehicle comes from the first owner and has only covered 31,406 km. VEHICLE DATA * Brand: Citroën * Model: Jumper * Version: Car transporter / Tow truck * License plate: VTF-27-N * First registration: 06/30/2022 * First registration in the Netherlands: 11/15/2023 * Mileage: 31,406 km * Fuel: Diesel * Displacement: 2,179 cm³ * Cylinders: 4 * Seats: 3 * Transmission: Manual transmission * Cab: Day cab * Wheelbase: 404 cm * Vehicle class: N1 Commercial Vehicle * Gross vehicle weight: 3,500 kg WEIGHTS & DIMENSIONS * Unladen weight: 2,080 kg * Ready-to-drive weight: 2,180 kg * Permissible total weight: 3,500 kg * Technically permissible total weight: 3,500 kg * Overall vehicle length: approx. 738 cm * Wheelbase: 404 cm VERHAEGH SPECIALS TRANSPORT BODY The Citroën Jumper is equipped with a professional and robustly built Verhaegh Specials car transporter body. The loading platform has a durable hardwood floor and ramps at the rear. Loading platform dimensions: * Length: 480 cm * Width: 215 cm * Loading platform height: approx. 75 cm * Hardwood floor * Ramps at the rear * Robust and professional construction The low loading platform height of only approx. 75 cm, combined with the ramps, provides a favorable approach angle and makes loading and unloading considerably easier. SUPERWINCH WINCH A Superwinch winch is located at the front of the transport body. This allows vehicles or machinery that cannot be driven onto the loading platform to be easily and safely pulled up. Ideal for car transport, vehicle dealerships, workshops, roadside assistance services, recovery companies, and machine transport. AIR SUSPENSION The vehicle is equipped with air suspension. This is a major advantage, especially for a car transporter, and ensures...

Condition: good (used), mileage: 9,33,548 km, power: 330 kW (448.67 HP), first registration: 11/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, parking heater, power mirror, seat heater, soot filter, spoiler, - Aluminum fuel tank - Brake booster - EPS - Air horn - Particulate filter - Radio/CD player - Sleeper cab - Side door - Seat heating - Auxiliary heater - Toolbox - Xenon headlights Year of construction: 2017 Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 7,905 kg Payload: 11,595 kg GVW: 19,500 kg Technical condition: good Optical condition: good Reference number: 79 Vehicle number: 79 Mercedes Benz Actros 1845 Big Space / Stand-alone air conditioning / Euro6 .: WDB96340310179577 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater Distance warning assistant Gjdpfoz H Ty Ssx Adkskd Lane keeping assistant Emission standard EURO 6 Special equipment: Lockable storage compartment above the windshield, axle load - measuring device, front axle load 8.0 t, airbag driver side, bi-xenon headlights, headlight cleaning system, CB radio, air horn, suspension: front springs 8.0 t, 2 leaves, parking brake additionally on the front axle, info display 12.7 cm with additional display, integral rear, upper comfort berth, narrow, fuel tank: combination tank aluminum - 820 liters diesel + 90 liters urea solution (AdBlue), cooler box / refrigerator, light and rain sensor, air intake behind the cab, storage compartment outside right, air deflector roof (lockable) and side, engine brake reinforced, parameterizable special module, premium comfort mattress bottom, spare wheel, reversing warning audible (warning signal outside), interface fleet management system, drawers under the dashboard, circuit breaker, seats in the cab: armrest passenger seat, seats in the cab: driver's seat comfort suspension seat, sun visor outside, 24V socket in the passenger footwell additionally, additional thermal insulation Additional equipment: Emission standard EURO 6, axle configuration: 4x2, Actros 4, trailer socket 24V / 15-pole, work lights, audio system: radio with USB connection, exhaust to the right outside, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air tank steel, compressed air unit medium, cab: L BigSpace, cab version: BigSpace, cab floor level, cab: mounting height 765 mm, cab: tilting device electro-hydraulic, carpet on the engine tunnel, sun protection roller side window, driver's door, cab: width 2.50 m, 12V socket additionally, compressed air connection in the cab, lift roof electrically, preparation for upper comfort berth, wide, cab: steel sprung, comfort, suspension: leaf / air, suspension: front spring support aluminum, power windows, windshield tinted, generator 100 A, transmission 12-speed - Type: G 211-12, rear axle bevel gear 440, body/superstructure: semi-trailer tractor, lower comfort berth, comfort locking system, communication interface, fender 3-part, radiator grille, power steering pump regulated, air compressor 2-stage, engine 12.8 L - 330 kW R6 Diesel (OM 471), engine compartment encapsulation, ramp mirrors, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger function seat, seats in the cab: driver's seat backrest foldable, voltage converter 24V / 12V 10 A, splash guard front, stabilizer front axle, storage compartment outside left, socket cab 24V, tachograph / EC control unit, door extension for...

Condition: excellent (used), mileage: 3,78,028 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,750 mm, first registration: 11/2018, loading space length: 5,530 mm, loading space width: 2,180 mm, loading space height: 100 mm, fuel tank capacity: 100 l, emission class: euro6, color: yellow, driver cabin: day cab, suspension: steel-air, tire size: 225/75R16, Equipment: ABS, air conditioning, central locking, cruise control, onboard computer, power assisted steering, traction control, trailer coupling, General information Number of doors: 2 Year of construction: 2018 Cab: single Registration number: 606705 Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Transmission Transmission: 6 gears, Manual gearbox Axle configuration Tyre size: 225/75R16 Brakes: disc brakes Front axle: Max. axle load: 2700 kg; Steering; Tyre profile left: 90%; Tyre profile right: 90% Rear axle: Max. axle load: 5350 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Measures Dimensions (LxBxH): 852 x 220 x 236 cm Weights Empty weight: 5.210 kg Carrying capacity: 1.990 kg GVW: 7.200 kg Functional Max. number of cars: 1 Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Air suspension - Bluetooth - Climate control - Electrically operated windows - Elektric mirrors - Heated door mirrors - Liftforks - Multifunctional Steering Wheel Gjdpfx Adj Ahtqqokokd - PTO - Radio/Cd/Audio system - Spare wheel - Speed limiter - Tachograph - Toolbox - Twin wheel axle - USB Connection - Winch = Remarks = VIDEO: Very nice and well-maintained Iveco Daily 70C18 3.0D 180 hp Euro 6 Recovery vehicle / Tow truck with wheel lift (underlift) Fiault PP30 body Slide-bed dimensions: L 5.53 m / W 2.18 m Winch: VIME EPH 4500 kg capacity Both the slide-bed and the winch can be operated via wireless remote control or manually Wheel lift (underlift) is operated manually Tires in good condition; equipped with beacons (warning lights) and work lights 378,000 km; in very good condition

Condition: used, mileage: 2,28,225 km, power: 103 kW (140.04 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, next inspection (TÜV): 10/2028, CO₂ emissions: 215 g/km, fuel consumption (urban): 10 l/100km, fuel consumption (extra-urban): 8.2 l/100km, fuel consumption (combined): 8.8 l/100km, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, trailer coupling, Trailer hitch, fixed, air conditioning, heated front seats, cruise control, Bluetooth interface, "RSD 2000" radio (2-DIN) with 4.3" monochrome display, front speakers, Bluetooth interface, multifunction steering wheel, rearview camera, Climatic air conditioning, digital tachograph (Smart TCO), double passenger seat on the right, rear wing doors without windows, RSD 2000 radio, EcoProfi, panel van, 6-speed manual transmission, rear-wheel drive, reinforced front axle, ABS, ESP, ASR, EDS, MSR, driver and front passenger airbags, knee airbag for driver, without front passenger airbag deactivation, hill start assist, front and rear parking sensors, electronic stability program, ABS, ASR, EDS, MSR, and trailer stabilization, ParkPilot, front and rear, including preparation for rearview camera, daytime running lights, electrical interface for external use, electrical interface for external use (CAN bus technology), RSD 2000 radio including 4.3" monochrome display and Bluetooth, exterior mirrors, electrically adjustable/heated, power windows, power windows front, front headrests, height and tilt adjustable, multifunction display with outside temperature display, hinges for rear wing doors with increased opening angle (max. 270°), sliding door on the right, power steering with safety steering column, steering wheel adjustable in height and reach, start/stop system with recuperation, start-stop system with brake energy recovery, central locking with remote control, double passenger seat, electric windows, ABS & immobilizer, multifunction display/on-board computer, seat covers in fabric, design "Austin", seats in the cab: driver's seat adjustable, two 12V sockets in the cab, rear wing door without window opening, steel wheels, diesel particulate filter, high roof in vehicle color, truck registration, medium wheelbase 3,640mm, reinforced rear stabilizer, BlueMotion Technology, ESP, tire pressure monitoring system, electronic immobilizer, 12-volt socket, seat covers in fabric, rubber floor covering. Gksdpjz Hgbcjfx Adkod

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MF01/2012, METRON AIR Heated Spray Booth / Extraction Wall for Sale For sale: a METRON AIR spray booth/extraction wall, manufactured in 2012 and equipped with a heated drying function. It is designed to extract and filter paint overspray during painting and to allow for solvent evaporation and drying of workpieces. The equipment was manufactured by the Hungarian company METRON Hungary Kft., which also provides installation services. Key specifications: Dimensions: 3.6 × 4.0 × 2.8 m Supply airflow: 14,000 m³/h Extraction airflow: 14,000 m³/h Power supply: 400 V, 32 A, 50 Hz Fan motor power: 4.0 kW Riello Gulliver BS 3 burner; maximum burner and heat exchanger output: 120 kW Painting temperature: approximately 25°C; drying temperature: 60°C Dry filtration system with EU3 filters 85–90% air recirculation in drying mode Gksdpfxo Ab Huxo Adksd The operating manual and a 2023 fire safety compliance inspection report for the METRON Air product family are available. Please contact us for information about the condition, included accessories, or to arrange a viewing.

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Gkodpegwqk Sjfx Adkod Conveyors system between the machines included.