Used Spiral Milling Facility for sale (12,713)

Condition: used, Year of construction: 1996, fence ja ja /nein dimensions of machine 1000x1000x1300 mm Weight 800 kg Bledpfjxq Hiqex Abzjp

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Bljdpfx Aextiunjbzjp Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: used, Lot of various profile cutters from Leitz in very good used or like-new condition. diameter: up to 148 mm drilling: 30 mm Bljdpsxrdl Eefx Abzjp width: up to 80 mm Labelling: BG test

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm Bledpfx Abovkit Aszop rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Bsdpfx Aoxtmqtebzjlp Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 006724, Max width workable: 1200 mm Max length workable: 1200 mm Max height workable: 1600 mm Bljdpfx Aou A Ev Uebzop

Condition: excellent (used), x-travel 450 mm y-travel 175 mm Bsdpevwgn Defx Abzslp z-travel 400 mm spindle turning speed range 60 - 2800 U/min weight of the machine ca. 1 t dimensions of the machine ca. 1,1 x 1 x 1,5 m Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand

Condition: excellent (used), functionality: fully functional, OERLIKON (Switzerland) Model : UB2 Spindle taper : MT3 Vertical Travel : 590mm Spindle speed : 25-2560 rpm Table size : 700X880mm Bjdpfxsxgcy Rj Abzolp

Condition: used, knife: WP Z36 Bljdpfxjxrdgij Abzep flight circle (ø): 125 mm drilling: 50 mm length: 180 mm material: aluminum Labelling: MEC

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) Bsdpfx Ajxrahcsbzjlp - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Bljdpfxoxtbkus Abzop

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC Turning and Milling Center SPINNER Model: TC110 MCY Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH Year of manufacture: 2007 Machining type: Turning of medium and large batch parts Control system: CNC control Sinumerik 840D sl Programming: Shopfloor programming, software package "Turning with ShopTurn" 840D sl options: "Residual material detection and processing", "3D simulation of the finished part" Drive power: 35 kW Chuck: D = 250 mm, d = 110 mm Maximum workpiece size: L = 1,000 mm, D = approx. 300 mm Tool magazine: 12 tool stations Axes/spindles: Main and counter spindle, C-axis, Y-axis Special feature: Y-axis for drilling and milling operations, tailstock and steady rest Live tooling: available Electrical connection: U = 3/PE ~ 400 V Frequency: 50 / 60 Hz Bodexrf Alepfx Abzolp Current consumption I_B = 63 A Current consumption I_N = 80 A

Condition: used, dia. of draw-in collets 4 - 24 mm max. radius to grind 12 mm Bodpev Dxzpofx Abzjlp grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, spindle motor power: 22 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 12,000 rpm, type of input current: three-phase, bar passage: 76 mm, total height: 2,805 mm, total length: 4,850 mm, chuck outer diameter: 210 mm, total width: 2,525 mm, bar diameter (max.): 65 mm, swing diameter over cross slide: 270 mm, spindle nose: A2#6, swing diameter over bed slide: 750 mm, overall weight: 12,000 kg, swing diameter over top slide: 540 mm, spindle diameter: 110 mm, Equipment: documentation/manual, Mastercam DOOSAN PUMA MX2100ST Machine Environment Additional Mastercam Mill 3D license available for an extra price Owner sells FANUC 31i-B control 9-axis DOOSAN MX2100ST turn-mill centre was manufactured in 2020, featuring a swing over bed of 750 mm and a maximum working length of 1020 mm. It supports a bar working diameter of 65 mm and includes comprehensive Y, A, C1, C2, and B axis movements for versatile machining capabilities. Has milling spindle with Capto C6 taper, 18.5 kW and 12 000 RPM and 40 tool swing arm tool changer. Bodpfx Abexr Utmezelp A report on the maintenance and technical condition of the equipment can be received from the local dealer upon request.

Condition: new, Year of construction: 2025, Five-axis CNC milling machining center - 3D CNC machining center > The CNC milling system Basis is the optimal entry-level model for milling plastics, composite materials such as CFRP, model-making materials, or aluminum. > High feed rate, compact 5-axis milling head for spatial machining, first-class milling results: The machine is individually adjusted to the material requirements before delivery. This ensures first-class surface quality and excellent milling results for all materials. > With a fixture from HG GRIMME SysTech, the milling quality can additionally be increased considerably. Existing fixtures or tables can be reused at any time. Bedpfexdwn Rex Abzjlp > Modular expansion stages: The CNC machine can be upgraded at any time, even individual requirements can be implemented quickly. With an optional partition wall, for example, unloading and loading can take place on one half of the table while the workpiece is being machined on the second half. The production cycle is accelerated with this technology. > Safety The safety booth already has a generous access area in the basic version and can be optionally upgraded with a soundproofing package. All drives and guides are protected and above the milling area. We have about 365 possibilities to adapt your CNC machining center exactly to your workpiece and material. The basic machine can be extended at any time. > Basic version of the CNC machining center - Cabin with sliding doors, automatic opening, pneumatic - High-performance CNC control NUM Flexium+ with hand terminal (nPad) and 19`` graphic screen - Tool changing system with 13 places, can be loaded from the outside - bellows for dust protection on the Z-axis - cooling unit Cube dimensions component X/Y and Z - 2.500 x 1.000 x 600 mm (plus 162 mm base) Travels X/Y and Z - 3,100 x 1,600 x 910 mm Travels of rotary axes A and C - Rotary axis C 540° - Swivel axis A ± 110 Speeds - Rapid traverse linear axes X/Y 80 m/min - Rapid traverse linear axis Z 30 m/min - Rapid traverse of rotary axes A/C 10,800°/min / 18,000°/min Accuracies - Positioning accuracy ± 0.045 mm - Repeat accuracy ± 0.040 mm Milling spindle - High-frequency milling spindle 9 kW continuous operation (S6) - High-frequency milling spindle 8 kW continuous operation (S1) - Max. speed 36,000 rpm - Tool holder HSK E 40 Machine weight: - approx. 8,000 kg Already included optional equipment - Vacuum pump and vacuum system 1x 6-unit - knee switch 1x - Ethernet and remote maintenance - 3D spline - 3D head data - T-Box connection

Condition: excellent (used), Fully automated Loghouse milling machine Blockhausfräse BL100ADT for economic production of components used in modern log cabin construction up to maximum dimension 140 x 200mm. Due to the efficient production method with automatic Optimization and multiple lengths (Multilog System) the output from this machine is very high. During each working shift can be produced up to 1200 metres of components Bljdpfxjxtblfe Abzsp for average sized, individual houses. High performance spindle drives and climb milling ensures a clean cut milling contour without being frayed.  Belt conveyer loading system, where the operator puts onto the raw material.  Infeed table with Servo pushing system for fully automated workpiece transport and positioning.  Blockhausfräse BL100 with the working units, drill, wind notch, main notch, log dovetail / straight connection groove head, crosscut saw.  Outfeed table with the pneumatic unloading device.  Workpiece deposit support, where the operator takes off the finished Logs.  Operator panel with IPC for software and machine control.

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm Bjdpfxoxq R E Nj Abzjlp A-axis 240 (-120/+120) ° C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m

Year of construction: 2001, condition: used, Price: On request Milling machine, VMC Model: CNC Manufacturer: DMG / Deckel MAHO Type: DMU60T Year of manufacturing: 2001 Control: Heidenhain Working-hours: 26266 Travel: 630x560x560mm Spindle-speed: 10.000 rpm Table-dimensions: 1000x600mm Spindle-take: ISO40 Max. Workpiece-weight: 400kg Incl. Filter Interlit SK200-760 Incl. Automatic toolholder Incl. Documents Incl. Video available Machine-weight: 6700kg Machine-dimensions: 3500x2400x2200mm - Year: 2001 - Documentation available: No - Drive system: CNC Bedpfx Abjwng H Hozelp Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2023, Maximum sheet thickness 14 gauge Overall length 10' Technical specification: 2023 EFM-1014CNC, 10' x 14 Ga. - Sheet Metal Bending Machine | CNC Folder #7806 ESA CNC control, manufactured in Italy Large 16-inch digital touchscreen display Max. 99 bends per program Memory for up to 2,000 programs Profile library with graphics Programmable radius bending Programmable angle/angle correction 48-inch CNC backgauge with table and fingers Performance Mild/hot-rolled steel, tensile strength 60,000 PSI Stainless steel/cold-rolled, tensile strength 85,000 PSI Soft aluminum, tensile strength 28,000 PSI Closing beam Opening beam 14 Ga. 18 Ga. 10 Ga. / 1/8” thickness 26 Ga. 24 Ga. Bending length capacity 10'1" Bending angle, programmable 0-135 degrees Bending capacity, mild steel 24 Ga. Bending capacity, stainless steel 28 Ga. Large beam/clamping beam opening 4-7/8" Min. reverse bend 1/2" Max. backgauge table travel 48-3/8" Min. backgauge table distance 1/2" Backgauge repeatability 0.0039" Backgauge table height 35-3/4" Bending beam motor 4 HP, 3-phase, 35 A Wiring: 220 V AC Backgauge servo motor 2 HP, 3-phase 220 V AC Clamping beam motor 1-1/2 HP, 3-phase Wiring: 220 V AC Machine weight: Shipping weight: 9,850 lbs 10,150 lbs Blsdpfxoxtt Nie Abzsp Machine dimensions (L x W x H): Shipping dimensions: 168" x 79" x 67" 174" x 80" x 71"

Condition: good (used), functionality: fully functional, Year of construction: 2001, For sale: HACO ERM 3075 press brake in very good technical condition. The machine has been regularly serviced and is fully functional – recently fitted with new control cards, ready for immediate use in production. Comes with 1 set of upper and 1 set of lower tools, both 3 meters in length. Technical specifications: Year of manufacture: 2001 Pressing force: 75 tons Bending length: 3000 mm Control: electro-hydraulic, control system recently replaced Robust construction, precise and reliable bending Suitable for both single-piece and batch production Condition: Mechanically sound No hydraulic leaks Control electronics have been newly refurbished (control cards replaced) Machine can be demonstrated under power Reason for sale: machinery fleet renewal. Price negotiable – reasonable offers and quick negotiations welcome. Bsdpsxt Icdofx Abzjlp

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips Bljdpfx Aexdwndjbzjp - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: used, Year of construction: 2008, total height: 2,750 mm, total length: 2,900 mm, total width: 2,400 mm, Empty weight: 8.500 kg Price: On request - Year: 2008 - Documentation available: Yes - CE marking present: Yes - Serial number: MB116360 - Drive system: CNC - Number of axes [pcs]: 3 - X-axis travel [mm]: 1100 - Y-axis travel [mm]: 650 - Z-axis travel [mm]: 600 - Table length [mm]: 1300 - Table width [mm]: 650 - Tool holder: SK40 - Max. spindle speed [rpm]: 8000 Bedpfx Abexta Nijzolp - Options: Chip collection tray, Chip conveyor, External cooling, Tool magazine, Machineklem - └ Tool magazine [pcs.]: 24 - Transport dimensions: 2900mm x 2400mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2014, The machine is in good technical condition. Bledpfxoxt H Hus Abzop Pressing force 30 tons (300 kN) Sheet format 1250×2500 (processing flat bars up to 6000 mm) Control system: Siemens Accessories: multitool, round and square punching tools of various sizes. Possibility of inspection in operation by prior arrangement.

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, controller model: Simens Sinumerik 840 D SL mit Handterminal HT 2, workpiece length (max.): 3,500 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 700 mm, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Perfect for: Applications in model and mold making, but also for milling other materials – a universal powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composite materials such as CFRP/GFRP, model making materials, aluminum Industry: Automotive, aviation, transport & logistics, leisure industry, plumbing, boat building, automation Reference number: 1210 Availability from: July 2025 CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle specifications: 13 kW / 10.3 Nm; 12,000-24,000 rpm; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 3500 x 1500 x 700 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Bodpfxswdt Ezo Abzjlp Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: upon request Year of manufacture: 2025 Condition: new

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 800 mm, spindle speed (min.): 36,000 rpm, spindle speed (max.): 12,000 rpm, CNC Machines from HG GRIMME SysTech - CNC 5-Axis Milling Machine G-S-F/Universal Perfect for: Applications in model and mold making, but also for milling other materials – a universal powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composite materials such as CFRP/GFRP, model making materials, aluminum Industries: Automotive, aviation, transport & logistics, leisure industry, plumbing, boat building, automation Reference number: 1208 Availability: July 2025 CNC Machine Type: 5-Axis CNC Milling Machine G-S-F/B (25-13) Spindle specifications: 8 kW / 6.4 Nm; 12,000-36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 2500 x 1300 x 600 Control: SIEMENS – Sinumerik 840D sl with HT 8 Tool changer: 13 tools Bsdpfowdt Ipox Abzolp Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: upon request Year of manufacture: 2025 Condition: new