Used Staircase Formwork for sale (89)

Condition: used, approx. 300 pcs. Hsdpjy Rvrqjfx Acbsfg

Condition: good (used), functionality: fully functional, 5 pieces 150 × 45 cm, 2 pieces 150 × 50 cm, 16 pieces 150 × 80 cm, 47 pieces 100 × 75 cm, 9 pieces 100 × 50 cm, 58 pieces 150 × 75 cm, 9 pieces 300 × 75 cm, 6 pieces 150 × 60 cm, 4 pieces 150 × 25 × 25 cm, 6 pieces 100 × 25 × 25 cm, 1 piece L 150 cm. Hfodpjy Sn N Rjfx Acbsg

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Weight: 40 kg Width: 1510 mm Depth: 1510 mm Hjdpfx Aoyctvcjcbsfg Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Weight: 40 kg Hfjdjyylugopfx Acbjg Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: new, Year of construction: 2025, functionality: fully functional, Stair milling machine for mortising treads and risers into stringers and posts. The machine is equipped with a high-frequency milling motor. The machine is brand new. 400 V, 50 Hz. Hfodpfeyxzacox Acbjg

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have Hedpfx Asvnr Rrocbofg scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Hjdpfxsvntb Sj Acbefg Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Hjdpfx Acovntmnebofg Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Steel staircase, exterior staircase, extension staircase -Steel staircase: Add-on staircase with treads and railings on both sides -Width: 880 mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm Hfjdpfx Acsrg Ivbobsg -Weight: 150 kg

Condition: good (used), Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform Hfedpfsikwgnox Acbsg -Manufacturer: Günzburger, Machine stairs, Machine access -Step size: approx. 600 x 260 mm -Height: upper step 685 mm -Permissible load: 200 kg -Number: 1x staircase available -Dimensions: 650/980/H210 mm -Weight: 14 kg

Condition: used, Formwork nail, formwork nails, concrete nails, head bolts -Manufacturer: Würth, shuttering nail in magazines box with 100 pcs. -Type: SMA 106/10 54mm long -Number: 61x box available Hsdpfx Asiqu R Sscbjfg -Price: per box -Dimensions cardboard: 120/100/H55 mm -Weight: 0.5 kg/box

Condition: new, Year of construction: 2018, Thyssenkrupp Velino xtra Escalator Escalator Description Manufacturer: Thyssenkrupp Model: Velino xtra FT 923 Type: 5 EK 30 Year of Construction: 2018 General: Travel height: 4.129 m Step width: 1.000 m Step length: 0.203 m Handrail length: 2 x 24.967 m Nominal speed: 0.5 m/s Incline angle: 30°C Number of steps that can be used simultaneously: 24 Total number of steps: 58 Safety features: Start-up switch, up/down, top, bottom Emergency stop switch, top + bottom Handrail retraction switch, right + left, top + bottom Chain tension monitoring switch, right + left Speed monitoring Phase control device Control cut-out switch, top + Below Thermal motor protection switch Brake function monitoring Handrail speed monitoring Fault step monitoring Cover plate switch Drive: Single drive with duplex chain reduction Motor make: emod Hodpfxow Hcvue Acbsfg Motor type: 5CNR112L/4-20 Motor power: 7.5 kW Rated speed: 1500 rpm Connection voltage: 230/400 V Gearbox type: auma FTS 125 worm gear Covering: Interior: Glass balustrade Exterior: Galvanized sheet steel The escalator was manufactured in 2018 and has never been used. Item location: Bottrop Availability: 4 units Disassembly and removal by buyer. Disassembly by us is also possible for an additional charge. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, Universal solid wood boring machine with stepless turnable drilling unit for universal applications like e.g. staircases, entry doors, windows, winter gardens as well as useable as horizontal mortiser. Short introduction: • Universal application: staircases, frames, entry doors, windows, winter gardens as well as useable as horizontal mortiser, ... Hsdpfxodx R E Tj Acbofg • Steppless turnable drilling unit: 65° - 0 - 65° • Drilling depth up to 200 mm (larger drilling depths optional) • Position height adjustment for 2 levels, pneumatically, 0 - 100 mm • Drilling in two levels through pneumatic raising and lowering of the drilling motor at a single workpiece clamping position • Pneumatic clamping cylinders • Multi spindle drillheads (option) • Pneumatic feed (option) • Mobil through castors (option) or with pallet trucks

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other variants on request - 5 tiers Hodpjgu D Rmefx Acbjfg - clamping depth 1050 mm - 1 pressure beam -1500 mm long, 60 mm high, per tier - 3 infinitely adjustable pendulum counter bearings, 400 mm long, per tier - 2 hold-downs with handwheel, per tier - 5 support arms, per shelf - all support arms with plastic supports (glue-repellent) - maximum pressing length 1600 mm - powder coated (glue repellent): grey white RAL 9002, moving parts light blue RAL 5012 - the presses are delivered ready for operation with pressure regulating valve + air standard connection.

Condition: new, functionality: fully functional, Year of construction: 2022, A mobile, diesel-powered construction concrete pump used to transport and convey liquid concrete or similar materials (such as micro-concrete, structural mortar or shotcrete) on a construction site — especially where it is difficult to place the concrete manually or where the concrete must be transported over long distances to the formwork or structural site. Hfjdpfjy It Udex Acbjg

Year of construction: 2001, condition: used, Crate washer for PETCYCLE plastic crates Additional title: Crate cleaning system Capacity: 2950 crates/h Power: 18 kW Current: 38 A Voltage: 230/400 V Frequency: 50 Hz Hfodpfx Asx T Avnecbog Length: 7300 mm Width: 1570 mm Height: 1710 mm Weight: 1900 kg Formats: plastic crate: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Running direction: transverse Material: stainless steel Position: free standing Base construction: Self-supporting machine housing in block construction on spherical feet Features: Caustic, hot water and fresh water spraying, inspection window, platform with staircase and railing, crate turner,

Condition: used, Year of construction: 2001, Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner. Additional title: PET bottle ejection system Capacity: 4000 crates/h Power: 2,8 kW Current: 8 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar, 1 m³/h Length: 3000 mm Width: 1910 mm Hfsdpfx Acex T Ayyjbsg Height: 3830 mm Weight: 2500 kg Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Operation / Control: Simatic S7-300 Material: stainless steel Position: free standing Base construction: Stainless steel square tube construction on spherical feet Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

Condition: used, Year of construction: 2021, functionality: fully functional, 3 colour flexo with slotter, rotery die cutter and folder-gluer SERIAL WORK(mm): 1290x2600 HOPPER OPERATION(mm): 1550x2600 MIN. CARTON WIDTH(mm): 350x750 MAX. PRINT AREA(mm): 1290x2350 CHANNEL WIDTH(mm): 9 CLICHE THICKNESS(mm): 3.9 MAX. CARDBOARD THICKNESS(mm): 10 CAPACITY (PCS/HOUR): 6000 MAX. ROTERY CUTTING AREA(mm): 1240x2350 CUTTER TIRE THICKNESS(mm): 10 PRESSURE TURN DIAMETER(mm): 399 CLICHÉ PRINT ROLLER DIAMETER(mm): 407 ROTERY FORMWORK ROLLER(mm): 360 ROTERY RUBBER REDIAMETER(mm): 292 Hfodjw Rya Djpfx Acbsg MAIN MOTOR POWER(kw): 15

Condition: used, Year of construction: 2005, Make: ARISA, Model: LD8-4-2000-470-230-LDE, Year of manufacture: 2005, Serial No.: 820016341, Press control system: Siemens, Type: Sinumerik 840D, Pressing force: 1,800 t, Table clamping surface: 4,500 x 2,300 mm, Ram clamping surface: 4,500 x 2,300 mm, Ram stroke: 750 mm, Ram adjustment: 400 mm, Die height min.: 900 mm, Die height max.: 1,300 mm, Strokes per minute: 8 - 24 spm, Cushion force (table): 2x 300 - 200 t, Cushion stroke (table): 250 mm, Cushion force (ram): 2x 5 - 55 t, Cushion stroke (ram): 150 mm, Coil feeding line, Max. coil weight: 25 t, Coil width: 300 - 1,800 mm, Sheet thickness: 0.5 - 3.0 mm, Consisting of decoiler and loading cart, Straightening machine, Oiling station, Transfer system, Switch and control cabinets, Platform system with staircase, Conveyor belt L 10,000 mm, Workbench system with undercabinets and vise, Quality control workstation. Hfsdpfsx Ry Dqox Acbog +++ Note: Machine is part of an online auction! +++

Year of construction: 2023, condition: new, Machine equipped with complete formworks (rotating hade, 5 steel rings, outer formwork) for pipe with diameters: Dint=1000mm si Dint=800mm; - The equipment can manufacture unreinforced concrete pipes with connection sockets: Dint=1000mm; Dint=800mm; Dint=600mm; Dint=500mm; Dint=400mm; Dint=300mm; - Maximum height of pipe: 1000mm; minimum height of pipe: 250mm - Vertical translation of the rotating head – electric engine - Variable revolution of the rotating head (frequency converter) Hfodpfx Acoiy Dl Hjbjg - Sizes: 2.0x2.0x4.2 meters - Mass≈2000 kilograms - Power: 16 kW (supply voltage: 380V) - Average productivity: 1 pipe / 6 minutes - Loading of the machine with concrete: manual; (optional – by conveyor belt) - Manipulating the formwork with the concrete pipe inside: with the forklift; - Recovery of the formwork: immediately. - Recovery of the ring: after 2-3 days, depending on the ambient temperature. - The frequency converter allows adjustment of speed according to the inside diameter of the pipe. - Changing the rotating head is simple and fast. - Rotating heads are lined with interchangeable wear resistant steel sheets. EQUIPMENT REQUIRED: - MX500L Concrete Mixer with aggregate loader: concrete preparation - Conveyor: transport of concrete from the mixer to the formwork. Steel rings for the lower plug - The production surface must be perfectly flat!

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Hodpfevvi Iqox Acbofg

Condition: excellent (used), Year of construction: 1986, operating hours: 60,000 h, functionality: fully functional, This offering comprises a complete production line for manufacturing Rubber and EVA foam. The line features machinery by leading manufacturers, including German brands such as Fecken Kirfel, Boge, and Wesero; Italian companies such as Moderne Meccaniche, Mapelli, Terenzio, Vigevano, and FGB; as well as Taiwanese manufacturer Kim Ho Sheng, among others. The production line consists of several large industrial machines, each equipped with operator platforms, intuitive control panels, heavy-duty metal rollers, and exhaust hoods. Most machines have a green finish and are fitted with prominent blue motors. Elevated sections are accessible via staircases, and control panels and electrical cabinets are mounted conveniently on the right side of certain units for streamlined operation. Production line components include: - 1 Italian 40-liter Banbury mixer (Moderne Meccaniche) - 1 Italian open mixing mill (Moderne Meccaniche) - 4 Taiwanese open mixing mills (Kim Ho Sheng Industrial Co., Ltd.) - 1 Greek-built conveyor belt with integrated automatic cutting system - 1 large Italian vulcanization press (Terenzio, 6 plates) - 2 medium-sized Taiwanese vulcanization presses (DAH TYAN HYDRAULIC MACHINE INDUSTRIAL CO., LTD, 6 plates each) - 1 small Greek vulcanization press (MIEL, 2 plates) - 1 German rubber buffing machine (Wesero) - 4 German bandknife horizontal splitting machines (Fecken Kirfel: 2 x K11, 2 x G1) - 1 Greek strip cutting machine - 1 Greek granulator (MIEL) - 1 Italian thermoforming machine (Vigevano) - 2 Italian semi-automatic travelling head cutting presses (MAV-2, Vigevano) - Approximately 100 iron chrome-plated moulds suitable for rubber and EVA foam Hjdeyrbybopfx Acbefg - 1 German industrial screw compressor (Boge C30) with a 1,000-liter tank and Omega dryer - 1 Greek oil steam boiler, 800 kg capacity (PROODOS) - 1 Italian burner (Riello RL70) - 1 Greek-manufactured industrial chiller, 174 kW capacity - 1 German industrial air heater (Wolf) - 1 heating chamber - 1 French PVC mixer (Lancelin) - 1 Greek floor-standing electronic weighing scale, 1,500 kg capacity (LION ENGINEERING) - 1 German industrial aluminium scaffolding (Krause, 6 meters) - 4 Italian trimming machines (FGB) - 10 assorted scales This comprehensive production line offers a turnkey solution for rubber and EVA foam processing.

Year of construction: 2017, condition: ready for operation (used), Used door panel production - consisting of: Double-End Profiler Brand: Kraft Technical Specifications - 2 scissor lift tables - 2 vacuum grippers - Feed roller conveyor with belt conveyor - New Siemens touch control system 13 roller conveyor sections Brand: Kraft Technical Specifications - Powered, approx. 3000 mm each Continuous Inlay Special inlay line Gantry loader Brand: Kraft Year of manufacture: 2023 Technical specifications - For separating, aligning, and placing HPL Glue applicator Brand: Bürkle Year of manufacture: 1990 Glue applicator Brand: Kuper Year of manufacture: 2018 Laying table Technical data - Work platform for glue tanks, including staircase - Lifting station - motor-driven - Includes PVC conveyor belt Continuous-feed platen press Brand: Bürkle Hodoy Dutmepfx Acbofg Optima 1428/50 Year of manufacture: 2017 Technical data - Start of series production in 2023 - 2 x 4 levels with a pressing area of 1400 x 2800 mm - With automatic feeder (manufacturer: Bürkle) - Removal device (manufacturer: Bürkle) Hedgehog buffer Technical specifications - For temporary buffering of semi-finished door panels - Total length approx. 14,000 mm - Solid steel construction - Approx. 200 individual compartments Storage and transport system Brand: Kraft Technical data - Powered storage and transport roller conveyor - Roller width 1000 mm - Total length approx. 120 running meters 3 automatic cross-transfer carriages Brand: Kraft Year of manufacture: 2018 Technical data - Roller width approx. 1400 mm - Transfer length: 2900 mm Horizontal shredder Brand: Reinboldt Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. • Offer: Used door leaf production line • Main machine: Continuous-action stack press • Technical specifications: • 2 x 4 tiers • Pressing area: 1400 x 2800 mm Additional equipment • Automatic Bürkle feeding system (for the press) • Bürkle removal device (for the press) • Panel rack • Manufacturer: Robering • Model: Dexion P90 Plus • Year of manufacture: 2021 • Technical specifications: • 8 uprights • Height: approx. 6000 mm • Max. permissible shelf load: 3000 kg • 2x Tilting hoppers • Manufacturer: Bauer • Model: WU-R1500 • Year of manufacture: 1998 • Technical specifications: • Capacity: 1.5 m³ • Hedgehog buffer • Technical specifications: • Solid steel construction • Approx. 200 individual compartments • KRAFT storage and transport system • Roller conveyor: • Roller width: 1000 mm • Total length: approx. 120 running meters • 3 automatic cross-transfer carriages (built in 2018): • Roller width: approx. 1400 mm • Transfer length: approx. 2900 mm

Condition: used, maximum load weight: 28,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model / Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPN * Country of registration: Germany * Unladen weight: approx. 7,924 kg * Gross vehicle weight: 36,000 kg * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions Exterior length: 13,670 mm * Exterior width: 2,550 mm * Exterior height: 4,000 mm * Interior height front: 2,690 mm * Interior height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st-2nd axle: 1,310 mm * Axle spacing 2nd-3rd axle: 1,310 mm ----Axles & Chassis 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control unit on the left in front of the axles * Axle as lift axle, fully automatic via EBS * Includes traction assistance (3x braking) * Radio remote control for lift axle ----Tyres & Rims* Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels complete * No spare wheel ----Body Closed side walls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with exterior locking bars * One lock rod per door * Upper belt made of steel, swiveling left and right * Platform at the front wall * Ladder at the front wall left and right * Standard cross beams Ø 60.3 mm (4 pieces) * Cross beam compartment: 3 x approx. 4,100 mm * Tarp 680 g/m² (RAL 9006 white aluminium) * Tarp supports with 3 positions (4 pieces) * Lashing straps (4 pieces) ----Floor / Moving Floor Cargofloor System CF-500 SL-C * Electric control * Corrugated aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under the floor ----Attachments JOST landing legs with sliding compensation * Plastic toolbox left in front of axles (1000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Closed side underrun protection * Swiveling mud flaps * Anti-spray mat on 3rd axle * Long staircase with extendable rear steps and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at the rear * Reflective contour markings according to EU regulation * LED work lights at the rear (radio controlled) * LED work lights at landing legs (radio controlled) Hjdpsy Ngbaefx Acbsfg * LED LCG-2 switch control unit ----Hydraulics / Connections ISO-N and ISO-S couplers + 15-pin plug * Radio remote control Knapen Trailers V1 * Hydraulic connections centrally at the front wall (vertical) * Pressure line left, return line right * Additional hydraulic connectors at the landing legs * Brake connections available * Acoustic reversing alarm (manually adjustable) ----Paintwork Body painted in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted For further information, I am at your disposal.

Condition: used, mileage: 4,835 km, power: 58 kW (78.86 HP), first registration: 10/1991, fuel type: diesel, overall weight: 3,600 kg, next inspection (TÜV): 03/2028, color: red, gearing type: mechanical, number of seats: 2, total length: 6,150 mm, total width: 2,310 mm, total height: 3,360 mm, Year of construction: 1991, * Mercedes-Benz 308D Dahms & Co Airport Fire Service Rescue Staircase * VERY NICE & WELL-MAINTAINED 308 D. * EVERYTHING WORKS PERFECTLY * VERY UNIQUE * RUST-FREE OPENING HOURS Monday - Friday from 09:00 - 17:00 (By appointment only...) Hjdpfjywq H Njx Acbofg CONTACT INFORMATION Phone: WhatsApp: Email: Transfer and customs license plates (export numbers) are available from us. Subject to errors and prior sale. Technical details and equipment features must be checked separately. The contractual condition is only what is inspected on site at the time of purchase and confirmed in writing – please schedule an appointment...