Used Stamping for sale (505)

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3230, overall weight: 1,22,000 kg, Vaccari PV410 Screw Press (1997) 1700 Ton Capacity Weight 122000kg Press Includes Electrotherm Vacuum Furnace for Heating Part 2 Robots for Loading/Unloading Parts and Components from Furnace to Press and Then Post Stamp Removal Dodpfx Afjx Ap D Iopocc Vaccari PV Series General Description: Screw presses expressly designed for forging under severe conditions. Preloaded structure, longer O-shaped ram and optimum guiding are specifications making these presses ideal for forging also special alloy, complex shaped pieces, with multiple sequences and with single or multiple-impression dies Furnace ref no. 77, Robot ref no. 1977 Fanuc R-30iB / M-10iA (2013) included with machine Sublocation - South Forging Press.

Condition: ready for operation (used), passage width: 1,100 mm, power: 55 kW (74.78 HP), empty load weight: 26,000 kg, CNC Hydraulic deepdraw- transfer press line !! 4 dies available: 2 in use 2 reserve !! Equipped with HMS doublehead decoiler and HMS straightener HMS Straightener RS 87-03/0 max bandwidth: 300 mm 7 straightening rolls at Ø 80 mm 2 (pneumatic) drawing rolls atØ 120 mm speed: 2-10m/min bandthicnkess: 0,8 - 3 mm HMS decoilerBA 3.3-03/040 max bandwidth: 300 mm max coilweight: 4 ton inner coildia:Ø508 mm Dsdpfxeygyy Ao Afpjcc outer coildia:Ø 1500 mm hydraulic system: 2,2kW - 100 bar - 11l/min Automatic CNC Feeder (HMS PSV-3-S0) Automatic toolchangingsystem Stroke in table: 150 mm Stroke in cushion: 100 mm Capacity: 200 Ton Max ram adjustment: 400 mm Command (feet/Double hand): CNC Max distance between table - ram: 1000 mm Dimensions of the table: 1000 x 1000 mm dimensions stamp: 1000 x 1000 mm Max counter-pression table: 35 Ton Max counter-pression ram: 2 x 1 Ton

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 44,287 hours Control system: Bosch PNC-P Standard equipment: Machine - Stable, easily accessible C-frame Dodpfewlifmjx Afpjcc - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety - CE Marking - Multi-Beam Light Barriers - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function + Thread Forming Function + Marking/Fast Beading Function + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection

Condition: ready for operation (used), Year of construction: 2011, punching force: 31 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, controller manufacturer: FANUC, number of axes: 2, This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Working area with repositioning: 5000 x 1525 mm • Max. sheet thickness: 4,5 mm (mild steel) • Feed rate X/Y: 100 / 80 m/min (128 m/min simultaneous) • Positioning tolerance: +/- 0,1 mm • Z-turret stations: 45 • AutoIndex stations: 4 (2 x B, 2 x C) • Turret feed rate: 30 1/min • Max. number of hits: 1000/min • Machine frame: Bridge frame • Punching drive: Servo-electric Twin Drive • Drives (turret + table): AC-Servo motors • Clamps: Pneumatical • Electrical connection: 400V / 50Hz • Electrical consumption: 1 kW – 7 kW • Air consumption (machine): 250 l/min • Air consumption (Air Jet Vakuum): 250 l/min Additional equipment • Loading unit: Loader L III 300 • Sheet size min.: 1000 x 300 mm • Sheet size max.: 3000 x 1500 mm • Material thickness: 0,5 – 8,0 mm • Max. loading weight: 300 kg • Max. stack height: 300 mm • Max. pallet weight: 4000 kg (2x2000 kg) • Max. feed rate (traverse): 70 m/min • Number of suction cups: 34 pieces • Double sheet control: Yes, with sheet thickness detector • Air consumption: 510 l/min, 6 bar inlet pressure • Electrical connection: 400V • Unloading unit with Parts Remover: PR 3 UL 300 P • Part size min./max.: 150 x 150 mm / 2500 x 1000 mm • Sheet thickness: 0,5 – 3,0 mm (4 mm for EM-Serie) • Max. part weight: 50 kg • Storage table size: 3400 x 1400 mm Dsdpfx Asx D Hpqofpocc • Max. part size for unloading clamps: 3000 x 1500 mm • Max. stack height skeleton table: 450 mm • Max. weight skeleton table: 2000 kg • Max. stack height storage table: 450 mm • Max. weight storage table: 4000 kg • Max. feed rate X-/Y-direction: 180 / 90 m/min • Air consumption: 1000 l/min, 6 bar inlet pressure • Electrical connection: 400V

Condition: excellent (used), Year of construction: 2015, operating hours: 2,416 h, functionality: fully functional, machine/vehicle number: 03814V2200, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 6 m/min, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, table width: 280 mm, table height: 1,200 mm, table length: 2,200 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 18,000 rpm, overall weight: 1,100 kg, spindle speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 3 bar, spindle motor power: 4,500 W, number of spindles: 1, number of slots in tool magazine: 1, input voltage: 380 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; Dcedpfx Afjygxc Ajpjc 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical condition, dismantled blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1 Dsdpfx Aoyb Sa Djfpscc

Condition: refurbished (used), functionality: fully functional, type of input current: DC, input voltage: 230 V, We offer this refurbished Heidelberg Original Heidelberg Cylinder machine with hot foil stamping and die cutting unit, letterpress machine, year of manufacture unknown. Manufacturer: Heidelberger Druckmaschinen AG Dcodpfx Asyglabofpsc Maximum sheet size: 57 x 82 cm Country of manufacture: Western Germany Distributor: Boos & Lauffs, Düsseldorf-Holthausen For questions or further information, please send us a message or call us. Heidelberg SBB 570 mm x 820 mm (22 ½" x 32 ¼") Aluminum heating plate from 2019 divided into 3 heating zones Temperature control: up to 200° C 2 independent foil transport lanes Foil advance option in cyclic mode Single foil unwind unit Power supply voltage: 230 V / 400 V AC 50 Hz Total power consumption: 4.7 kW Heating plate power: 4.5 kW Removable heating plate also allows the machine to be converted from hot foil stamping to die cutting Maximum mechanical paper handling speed: 2,500 sheets/hour Maximum sheet size: 570 x 820 mm

Condition: excellent (used), For sale: Complete industrial pneumatic press in a workshop housing, ideal for punching, pressing, stamping, or other assembly processes. The set includes: • Pneumatic column press with a robust steel frame • Control valve, cylinder, and pneumatic distribution • Integrated control panel with emergency stop switch • Steel worktable with adjustable side guides • Power cabinet, distribution board, and cable management • Mobile table with transport brake Drive: Pneumatic supply Control: Solenoid valves, start/stop buttons Dcodpfoud Rddsx Afpoc Power supply: 230 V (electric system integrated in the base) Technical condition: Very good. Used, fully functional set ready for immediate use in a production facility. Genuine industrial construction, not for amateur use.

Condition: good (used), Year of construction: 1982, FOR SALE Dsdpfx Afox Imizepecc Heidelberg GTP is a platen press (format 34 x 46 cm) designed for hot foil stamping (Prägen) and embossing. Renowned for its double rotary arm feed system. Main technical features Functions: Hot foil stamping, embossing, die-cutting, creasing, and perforating. Unlike the standard GT model, the GTP often lacks an inking system to prioritize pressing force. Sheet size: Maximum 340 x 460 mm; minimum 85 x 102 mm. Pressing force: Up to 60 tons, featuring a reinforced structure compared to pure printing models. Speed: Up to 4,000 sheets per hour. Weight: Approx. 2,250 – 2,300 kg. BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, machine/vehicle number: 173, punching force: 30 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, feed rate X-axis: 100 m/min, controller model: AMNC-F (FANUC 180i-PB), No minimum price – guaranteed sale to the highest bidder! Auction of an AMADA EMZ-3610 NTZ including LKI MP SheetCat 3015 loader/unloader! Bid submission obligates timely collection between 23/03/2026 and 27/03/2026! AMADA EMZ-3610 NTZ TECHNICAL SPECIFICATIONS Punching capacity: 300 kN Turret stations: 45 stations Max. sheet size: 1,525 × 5,000 mm Max. material thickness (mild steel): 4.5 mm Max. material weight (F1): 50 kg Max. material weight (F4): 150 kg X-axis travel: 2,500 mm Y-axis travel: 1,525 mm Feed speed X-axis: max. 100 m/min Y-axis: max. 80 m/min Strokes per minute 1 mm pitch (5 mm stroke): 780 rpm 25.4 mm pitch (5 mm stroke, X-axis): 500 rpm 25.4 mm pitch (5 mm stroke, Y-axis): 330 rpm Max. stroke length: 37 mm Turret rotation speed: 30 rpm Positioning accuracy: 0.07 mm MACHINE DETAILS Electrical connected load: 27 kVA Compressed air requirements Basic machine functions & air blow: 250 l/min POWER VACUUM (EMK) / AIR JET VACUUM (EMZ): 250 l/min Operating pressure: 5 bar Control Control: AMNC-F (FANUC 180i-PB) Controlled axes: 4 axes (X, Y, T, C) + A axis Programming: metric or inch Dimensions & weight Approx. dimensions (L x W x H): 5,422 x 5,120 x 3,241 mm Height without leveling wedges: 2,317 mm Height with mirror: 3,241 mm Machine weight: approx. 24.5 t LKI MP SheetCat 3015 TECHNICAL SPECIFICATIONS Max. sheet size: 3,050 × 1,525 mm Min. sheet size: 1,000 × 300 mm Sheet thickness: 0.5–6.0 mm Max. sheet weight: 300 kg Max. load per pallet: 3,000 kg Max. pallet stacking height: 300 mm Max. stacker table load: 4,000 kg Cycle time (continuous operation): approx. 37 s Max. loading unit travel speed: 60 m/min Max. unloading unit travel speed: 30 m/min MACHINE DETAILS PLC: Mitsubishi Q-Series Dsdpfoycqm Sox Afpecc Operator terminal: Beijers E1032 Dimensions & weight Approx. dimensions: 5,775 x 3,775 x 3,100 mm Weight approx.: 4,100 kg Max. compressed air requirement: 750 l/min SCOPE OF DELIVERY 2x chip trolleys, Bauer EXPO 150, year: 2023 available manuals two tool cabinets with tools as per photos EQUIPMENT Vacuum cups: 34 pcs Separation magnets/pallets: 3 pcs Double-sheet detection with thickness control Total dimensions (Amada punch and MP SheetCat) Overall dimensions (L x W x H): approx. 12,000 x 8,000 x 3,000 mm Weight approx.: 30,000 kg Note: The CNC control parameters are not included.

Condition: new, Year of construction: 2025, machine/vehicle number: MOT01-300, coil inner diameter: 250 mm, coil outer diameter: 1,450 mm, coil weight: 1,000 kg, coil width: 300 mm, product width (max.): 300 mm, overall weight: 300 kg, load capacity: 1,000 kg, spreading range: 250 mm, Automatic coiler or decoiler Remote control console - wireless Automatic and manual working mode Dcjdpfob H R Ayox Afpec Speed fine tuning potentiometer Danfoss inverter Synchronized easily with punching line Ideal for stamping automatic lines Coiler motorized Central expansion Run both directions, forward and reverse Loop sensors control Speed from 0.1 RPM to 28 rpm Motor with gear reducers Capacity max. load 1 ton Strip width up to 300 mm Inner diameter min 250 mm max. 520 mm Outer diameter max. 1450 mm Power 0.75 KW Dimension 1.200 mm x 1.200 mm height 1.600 mm Weight cca. 300 kg with CE certificate On stock also high speed presses Schaal, Mabu and Bruderer presses as well bas band saw blade welders

Condition: good (used), Year of construction: 1952, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Safety cage fully enclosed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Protrusion: 190 mm Dedpfxsb A Hwhj Afpjcc -Stroke rate: 105 strokes/min -Adjustable plunger: 50 mm -Pulley surface 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Protrusion: 180 mm

Condition: used, Year of construction: 2016, The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing press designed for efficiency and precision. With a format of 265 mm and a print count of 2 million, this machine is currently available in stock and located in Germany. This press is equipped with a range of advanced features to meet various printing needs. It operates at a speed of 11,000 impressions per hour and has a cylinder circumference of 254 mm, accommodating a web width of 265 mm. The hotfoil stamping speed is 8,000 cycles per hour, with a maximum print size width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in increments of 0.01 mm. The machine operates at a voltage of 400V for the main unit and 230V for peripherals, with a net frequency of 50Hz. Key features include a feeding unit with web cleaning, corona pretreatment for enhanced adhesion, and trimming and suction capabilities. The press can handle paper weights ranging from 80 to 180 g/qm2 and carton up to 300 g/qm2 with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesive bonds and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die cutter unit, and a rotary hotfoil embossing unit. Additional features include web inspection via the Powerscope 4000 manual system, a Uviterno Coldstar water-cooled drying model with UV capabilities, 4 trimming knives, mesh pulling monitoring, and an IR dryer. The maximum web diameter is 800 mm, and the press is equipped with remote maintenance capabilities, a plate tool, and maintenance tools for ease of use and upkeep. Format: 265 mm Equipment: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Dcedpovfx A Ajfx Afpjc Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die Djdpfx Afeiqhg Uepecc -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg

Year of construction: 2007, condition: ready for operation (used), overall weight: 2,000 kg, This BRUDERER BSTA 25 was manufactured in 2007. A high-speed precision stamping press, it features a vertical main ram for precise stamping and a horizontal feed mechanism for workpiece positioning. Ideal for sheet metal forming, stamping, pressing, and metal shaping, it operates at high speeds with computerized control. Compact design ensures space-saving installation. Consider the opportunity to buy this BRUDERER BSTA 25 metal press. Contact us for more information. Machine Benefits Technical Machine Benefits • Compact design for space-saving installation • Machine type: high-speed precision stamping press • Application: sheet metal forming, stamping, pressing, and metal shaping • Number of axes: 2 moving axes (main ram axis and feed mechanism) • Main ram movement: vertical, for precise stamping • Feed mechanism: horizontal, for workpiece positioning • Maximum pressing force: approx. 250 kn (varies by model) • Speed: high-speed operation, capable of several hundred strokes per minute (model dependent) • Accuracy: high repeatability and precision machining • Control: computerized or cnc control (depending on model) Extra Information • Depending on the configuration/equipment, the weight ranges between 4,670 and 5,300 kg Dcodpfx Afsx D H N Dopsc

Condition: reconditioned (used), functionality: fully functional, total height: 1,520 mm, year of last overhaul: 2026, DGUV certified until: 01/2027, warranty duration: 6 months, total width: 600 mm, total length: 700 mm, input voltage: 400 V, Bread Roll Press Gostol Semi-Automatic 4-14 Proven technology ... tried and tested many times! Stainless steel knives with 3 stamping plates robust technology 14-piece division Exclusive: DGUV V3 tested Connection: 400V, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm (WxDxH) New machine & SAB tested with warranty + spare parts service Dsdpfsyagtisx Afpecc Options: additional stamping plates maintenance contract spare parts box delivery service commissioning & training We have more top dough dividers in stock!

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Dedeinwwzjpfx Afpscc Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm Dedpfx Asxlzrcsfpocc - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Condition: reconditioned (used), > Upper heating with small individual radiators via toggle switch > Lower heating with large radiators > Upper stamping system Dcsdpfjfug Anox Afpoc > Protective grille > 4 cooling fans D05 > Automatic pre-blowing and demoulding

Year of construction: 2013, condition: ready for operation (used), number of axes: 3, This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working area: approximately 1270 × 2000 mm • Maximum sheet thickness: up to 6 mm (standard setup) • Rotational tool changer for versatile punching • High precision and repeatability • User-friendly cnc control Dcjdpfx Ajyaihvjfpoc • Compact and space-saving design • Fast tool change for efficiency • Robust and durable construction • Automated sheet clamping for consistent results • Suitable for batch and small to medium production runs

Condition: refurbished (used), Year of construction: 2006, Seewer Rondo SCM 50 croissant line with free connectable winder. Use the Croissomat to produce your croissants automatically. Triangles are stamped from a dough sheet, turned, and then curled to perfection. You can use the SCM to produce croissants in addition to other curled products. This compact machine can be accomodated in any bakery. for unfilled croissants for laminated and non-laminated doughs up to 900 units per row per hour (maximum 5,400 units) between 2 and 6 production rows digital control puncher press rolls Dsdsw Hykiepfx Afpecc year of build 2006 1 stamping knife is included, extra stamping knives are available for 2250 euro each

Condition: good (used), Year of construction: 2018, operating hours: 718 h, mast type: telescopic, fuel type: hybrid, color: white, Drivetrain Drive: Wheel Functional Working height: 2.900 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1400 m Dodpfx Afjtync Sepjcc Transport dimensions (LxWxH): 7x0,8x2 Production country: DK Additional information Please contact Vink Machinery for more information Falcon Spider FS290 * 2018 •⁠⁠718 working hours •⁠ ⁠Diesel and batteries •⁠⁠29 meters working height •⁠⁠14 meters horizontal range * 4 meters negative •⁠ ⁠Adjustable wheels •⁠⁠200 kg lifting capacity •⁠ ⁠Stamp machine •⁠ ⁠Remote control •⁠ ⁠4070 kg own weight •⁠ ⁠Including documents

Condition: good (used), Year of construction: 2016, operating hours: 601 h, mast type: telescopic, fuel type: hybrid, color: white, Drive: Wheel Working height: 2.900 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Max. horizontal reach: 1400 m Production country: DK Please contact Vink Machinery for more information Falcon Spider FS290 Dcjdetxxqwspfx Afpoc * 2016 •⁠⁠601 working hours •⁠ ⁠Diesel and batteries •⁠⁠29 meters working height •⁠⁠14 meters horizontal range * 4 Meter negative •⁠ ⁠Adjustable wheels •⁠⁠200 kg lifting capacity •⁠ ⁠Stamp machine •⁠ ⁠Remote control •⁠ ⁠4070 kg own weight •⁠ ⁠Including documents

Condition: good (used), Year of construction: 2007, operating hours: 8,162 h, fuel type: hybrid, color: white, Weights Empty weight: 3.040 kg Functional Dcjdpfx Asu Afw Eofpec Mast: articulated arm Working height: 2.300 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1150 m Production country: DE Additional information Please contact Vink Machinery for more information Teupen leo 23 GT * 2007 * Diesel and 220 volt * 8162 working hours * 23 meter working height * 11.5 meter horizontal reach * Stamping machine * ​​adjustable undercarriage * Remote control * Including documents

Year of construction: 2022, condition: like new (used), Machine for printing QR codes and applying hologram patches, customization of labels or roll-fed paper support. Performs hot stamping of customized hologram or transparent foil onto the QR code, enabling immediate verification via reader device with IOS or Android software. Dodpfxeygku Ro Afpecc