Used Steel Construction Hall for sale (31,381)

Condition: used, Straightening and welding plate, cast steel / grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 1985 mm Width: 1000 mm Thickness with ribs: 220 mm Working height: 860 mm Plate thickness: approx. 35 mm throughout Bjdskpwuxepfx Agkeld - 4 height-adjustable feet Weight: 1050 kg

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - solid steel plate - milled surface - 4 bolted lifting lugs Bjdpfxjhwn Tij Agksld - plate equipped with some symmetrical holes Net weight approx. 2380 kg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm Bledpfxothuzpo Agked - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Tool steel, round material, shaft cut Shaft, steel block, sawn shaft Cold work tool steel 1.2842 Material section Ø 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material designation: 90MnCrV8 Cold work tool steel with high hardenability and good dimensional stability during hardening Used in toolmaking for cutting, punching, and embossing tools. Rollers and profile rolls, measuring tools, guide rails, paper cutting knives. Condition on delivery: annealed to max. 229 HB Tensile strength as delivered: 770 N/mm² Hardening: 790–820 °C Tempering: 220–260 °C Working hardness: 58-62 HRC Soft annealing: 680-720 °C - Medium alloyed cold work tool steel - Oil-hardening Blsdpfx Aogmi U Segksd 4 pieces available, price per piece.

Condition: used, Measuring and scribing plate made of steel/cast iron, heavily ribbed, STIEFELMAYER originating from a measuring machine with manually guided measuring arm high-precision measuring plate with good surface Machine No.: 8530979 Year of manufacture: approx. 1989 Length: 5000 mm Width: 2000 mm Thickness: 350 mm Working height: 690 mm Plate thickness: 50 mm throughout Blsdpeftpl Djfx Agksd - 15 height-adjustable feet - very precise and stable longitudinal guides, bolted to the side of the plate Space required (L x W x H): 5000 x 2120 x 400 mm Weight: approx. 7500 kg good surface

Condition: used, Steel and cast iron straightening and welding plate, heavily ribbed heavy-duty straightening plate Length 1600 mm Width 1005 mm Bodpfx Agjdzqbaeksld Thickness 280 mm Plate thickness approx. 85 mm throughout - Center hole Ø 245 mm, 400/800 mm - Threaded holes M 20, approx. 55 mm deep - Through holes Ø 27 mm Weight approx. 2.5 t Good condition Former press table – presumably machined parallel on both sides

Condition: used, Clamping plate with T-slots made of cast steel/grey cast iron Base plate for radial drilling machine Bledpfsh R D Uzsx Agkod Assembly table, assembly station, base plate for column slewing crane Length 1850 mm Width 915 mm Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top side milled parallel to the underside = clamping surface - Underside also milled, ribs rest flat and support - Ideal as a base plate Net weight 1140 kg good condition

Condition: used, Heavy-duty roller conveyor with steel support rollers Year of manufacture: approx. 2000 Roller conveyor length: 4950 mm Bedpfx Aow E Nwpsgkeld Usable width = roller width: 485 mm Total conveyor width: 580 mm Conveyor height: 950 mm Number of rollers: 7 pcs Roller pitch: 850 to 620 mm (center to center) Roller diameter: Ø 90 mm Axle diameter: Ø 20 mm - Very robust construction made of angle steel 130 x 65 x 8 mm Transport dimensions: length 4950 mm, width 580 mm, height: 950 mm Net weight: 360 kg In good condition

Condition: used, Steel cast and grey cast iron straightening and welding plate, heavily ribbed Heavy-duty straightening plate Length: 1600 mm Width: 1000 mm Thickness: 210 mm Plate thickness: approx. 32 mm throughout Table height / working height: 565 mm Bledpfxjqvq Uce Agked - Very stable steel table base (custom-made) - Plate with base movable by pallet truck Weight: 740 kg Good condition

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Bodpfx Agodz Sq Eokeld Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) Bedpfjdzp T Dox Agkjld - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, Steel Bench Grinder, Steel Grinding Machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 workstations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kW Power supply: 380 Volt, 50 Hz - 3x oscillating grinding tables - all 3 workstations with swiveling tables, feed adjustment via handwheel - one workstation (the 4th) with a swiveling and tilting table, feed adjustment via handwheel - 1 diamond grinding wheel Ø 100 mm mounted (heavily worn) - 2 corundum grinding wheels Ø 200 mm mounted Blodjdz Srkspfx Agkod - Forward and reverse running at each station - Coolant system integrated in the machine base Required space (L x W x H): 1100 x 1000 x 1300 mm Weight: approx. 450 kg good condition

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), Airrex AH 300i Mobile Infrared Heater Tank: 45 l Output: 15 kW Suitable for spaces up to 1500 m³ Highly economical – fuel consumption 1.05 – 1.24 l/hr Dimensions (LxWxH): 95 x 30.5 x 101 cm Weight: 46 kg Adjustable temperature range: 0 – 40°C Mobile, equipped with swivel casters Ready for immediate use – just plug in and switch on Clean combustion – no chimney required! App control – set temperature, receive notifications, and check fuel levels directly from your smartphone Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan No exhaust gases – emits no burning smell Complies with the latest EU emissions directive Bjdpfx Agjylv Iyokeld Automatic restart after power outage

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), Airrex AH 800i Mobile Infrared Heater Tank: 70 l Output: 22 kW Suitable for spaces up to 2000 m³ Highly economical – fuel consumption 1.7 – 1.9 l/hr Dimensions (LxWxH): 130 x 35 x 134 cm Weight: 81 kg Adjustable temperature range: 0 – 40°C Mobile, mounted on caster wheels Ready to use immediately – just plug in and switch on Clean combustion – no chimney required! App-controlled – set temperature, receive notifications, and check fuel level directly on your smartphone Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan Bjdpsylv Dzofx Agkold No exhaust gases – emits no combustion odors Complies with the latest EU emissions directive Automatic restart after power failure

Condition: like new (used), 400V connection (two 16A sockets required) Power: 19 kW (top oven) Dimensions (W x D x H): approx. 91 x 120 x 218 cm Bodpfsympi Tjx Agkold

Condition: new, machine/vehicle number: RS600, Year of construction: 2025, We offer a two-shaft shredder RS-600, RS-640, RS-680 by RS TeamTech - Recycling Solutions Designed to shred a wide range of materials. Parameters: Working area: 600x400mm Number of knives on the disc: 1-12 Dial thickness: 10-60mm The size of the processed material: 10-80 Engine power: 22kW WEIGHT: 1480 kg Only with us innovative system for changing the size of the shredded material in the range of 10-80 mm without the use of a sieve. Our shredders can be integrated into automated recycling lines that we design and build for individual needs Each of the models is equipped with a Simens controller protecting the device against overload and has additional protection for motors and the function of reversing the shafts. Bodpehy S Icjfx Agkeld Our technical team is available 24/7 for our clients We produce personalized shredders for individual needs. Ability to run tests. Recommendations on request. Polish production.

Condition: like new (used), functionality: fully functional, 48 pieces of Siteco industrial hall luminaires of which 16 units with diameter 43 cm; 32 units with diameter 58 cm Available in units of 8 pieces each Price per unit: see price indication Bsdpfjvu Akcjx Agkold ex works

Condition: used, mileage: 1,30,000 km, power: 300 kW (407.89 HP), first registration: 10/2007, fuel type: diesel, emission class: euro5, Equipment: ABS, air conditioning, all wheel drive, Actros 2041 !!!!! ONLY 130,000 km !!!!! First registration: 10/2007 4X4 ALL-WHEEL DRIVE Full steel suspension - leaf/leaf springs 3 pedals Manual transmission Euro 5 VIN: WDB9340821L278602 ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We are happy to assist with your financing or leasing Blodpfx Agsyn Uiuoked EU sale: net price upon presentation of company documents and VAT number VAT deposit €2,000 Our services for you: - export plates - export documents and EUR1 certificate - worldwide transport - accommodation options - transfer from Munich Airport or Passau train station

Condition: good (used), axle configuration: 2 axles, first registration: 11/1979, suspension: steel, color: orange, Year of construction: 1979, Make axles: ROR Brakes: drum brakes Suspension: leaf suspension Bodpeyl Udyjfx Agkjld Empty weight: 3.680 kg Carrying capacity: 27.820 kg GVW: 31.500 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Manufacturer: Peddinghaus Model: 210/25s Bledpfx Ajwcqmaogkjd Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: used, functionality: fully functional, Year of construction: 2012, in the following configuration: - GEKA punch holder No. 8-31 and 8-40 with quick-change system - GEKA die holder No. 8 and No. 5 - Support table at the punching station with stops - Support table at the flat bar station with stops - Selector switch for setup and operating modes - 1 foot pedal - Incl. accessories (punches and dies) - Technical documentation - CE design Technical data: Punching unit: Punching force: 40 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 pcs. Max. sheet thickness Ø: 20 x 15 mm Working height: 970 mm Flat bar shear: Cutting capacity: 300 x 6 / 200 x 13 mm Angle steel 45° (one flange): 50 x 50 x 6 mm Angle steel 90°: 80 x 80 x 8 mm Blade length: 356 mm Working height: 980 mm Round and angle steel shear: Angle steel 90°: 80 x 80 x 8 mm Round: 30 mm Square: 25 mm Working height: 1,110 mm General: Motor power: 3 kW Voltage: 400 V / 50 Hz Dimensions: Width: 800 mm Blsdpjxu Ugxsfx Agked Depth: 1,100 mm Height: 1,520 mm Weight approx.: 580 kg The specified performances refer to steel with R = 45 kg/mm²

Condition: used, Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel. Specifications: Horsepower: 20 kW Bljdpfjygvpajx Agkjd Material Of Construction: Cast iron and carbon steel Type Of Mill: Pin mill

Condition: good (used), Containers, granule containers, storage tanks, powder containers, paint powder containers -Container: Granule container Bjdpfx Ageyli S Eekeld -Material: Stainless steel tank -Dimensions: see photo technical drawing -Number: 2 containers available -Price: per piece -Dimensions: 605/605/H1160 mm -Weight: 28 kg/pc.

Condition: good (used), Containers, granule containers, storage tanks, powder containers, paint powder containers -Container: Granule container -Material: Stainless steel tank -Dimensions: see photo technical drawing -Number: 2 containers available Bedeyli R Ijpfx Agkjld -Price: per piece -Dimensions: 605/605/H1160 mm -Weight: 28 kg/pc.

Year of construction: 2016, condition: like new (used), functionality: fully functional, Complete line for steel wire fibres production, Model M-1 ZSN 35 Fibre bending and cutting machine Machine type: M – 1 ZSN 35 Dimensions and weight: 1200 x 1050 x 1620 mm; 1200 kg Material to process: Low carbon steel wire %C 0.05 ÷ 0.12 Product to process: Hooked end fibre 0.75 x 35 / Hooked end fibre 1.00 x 50 Max. number of wires to process: 15 Wire pay-off device Dimensions and weight: 5220 x 2500 x 2008 mm, approx. 2200 kg Number of spools: 15 Max spool weight: 1000 kg Bsdewu Dadjpfx Agkold Wire diameter range: 0.6 – 1.2 mm Spool type: Z2, Z3 PRICE: 190,000 EUR