Used Steering Parts for sale (22,846)

Condition: new, Year of construction: 2025, functionality: fully functional, A workshop washer is a universal tool that should be found in every service, garage or workshop. It is an irreplaceable device for quick and inexpensive removal of dirt. A very big advantage is the possibility of using the washer in a closed room. The parts washer is a guarantee of effective removal of all contaminants, from oils to hard-to-reach deposits, while ensuring safety and long-term performance of the components. The technology used guarantees not only cleanliness, but also protection against corrosion. It should be noted that the cleaning effects will depend on the detergents used. Hfodpfxjvugvve Adweb The parts washer is made to use up to 60 liters of cleaning agent, with a maximum tank capacity of 80 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 10 to 12 liters per minute, which allows for thorough cleaning of surfaces, even those with small cracks, using a strong stream. The liquid is drawn by the pump from the bottom in a closed circuit and fed further under pressure through a flexible hose. The workshop washer has 4 legs, thanks to which we have stable operation and an optimized working height. The cover locks automatically after opening. The device is also equipped with a worktop below the level of the bathtub, which can be used to place washing accessories or washed parts so that they can be left there to dry. The device requires self-assembly. Technical data: Bathtub capacity 80L Maximum pump capacity 10-12 l/min Power supply 230V Dimensions 775x540x915mm Overall dimensions inside 710x480x260mm Shelf under the bathtub 700x420mm Power supply 230V Weight 23kg

Condition: used, Belt Conveyor, Belt Conveyor System, MFP Conveyor Technology Machine No.: 17565 Year of Manufacture: 2018 Usable length: 3100 mm Belt width: 600 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 45 m/min Conveyor height: approx. 1120 mm Hfsdpfx Adswrihnewsb Motor power: 140 Watts Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via potentiometer on ROFRE frequency inverter, type 897 - Reversible operation (right/left running) - Belt drive via INTERROLL drum motor - Stable sheet steel construction with closed steel plate under the conveyor belt - 1 piece height adjustable subframe HAACON with hand crank, conveyor height approx. 950 to 1150 mm - HAACON subframe mounted on steel plate, length 750 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 3180 x 760 x 1150 mm Weight: 250 kg Good condition

Condition: new, Year of construction: 2025, - Demonstration machine from 2025 completely made of stainless steel including Washing pump - Automatic basket drive - Touch button for turning the basket outside the Cleaning procedure Hfjdog Hgcwopfx Adwsb - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 1180 mm - Usable height of the basket to the lower edge of the nozzle holder 675 mm - Flat jet nozzles - washing pressure 4 bar - Return bend as a condenser for little water consumption - including 20 KG LCT Power Star 50-730 - delivery after receipt of payment within 5 - 6 weeks - 24 months guarantee

Condition: used, mileage: 1,22,196 km, Year of construction: 2017, operating hours: 8,592 h, General information Field of application: Construction Serial number: 256086 Drivetrain Drive: Wheel Weights Hjdew Uchxepfx Adwsfb Empty weight: 26.000 kg Functional Lifting capacity: 40.000 kg Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Dunlop Carrier engine: - Upper engine: - Counterweight: 5500 Transport dimensions (LxWxH): 10.7x2.55x3.4 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 2003, Control unit, control element, interface, contactor -Manufacturer: Jungheinrich, Contactor control unit from order picking forklift type: ECE 20 -Type: 5000 7894 Hfjdpfeiy R Uaox Adwsb -Voltage: 24 V -Dimensions: 150/100/H100 mm -Weight: 1.4 kg

Condition: good (used), functionality: fully functional, A lot of parts for Index K-16 machine collets, curves, tool holders, shafts, gears, slides, distance rings, end switches, etc. Hedpfx Adox Ty Uuewefb See attached photos.

Condition: excellent (used), functionality: fully functional, An old classic—anyone familiar with this device swears by it. 3 units are available, including a box of spare parts with circuit boards, etc. Total price for the complete package of 3 devices: €2,999. Free delivery! Price for a single unit: €1,250. Hedoxk Ty Nspfx Adwefb

Condition: used, Conveyor belt, belt conveyor, belt feeder, MTF belt conveyor Year of manufacture: approx. 2015 Usable length: 2300 mm Belt width: 320 mm Belt length: approx. 4750 mm Frame profile height: 32 mm Return roller diameter: 25 mm Hjdpfox R Eh Ijx Adwofb Belt speed: 25 m/min to 50 m/min Conveyor height: approx. 950 to 1350 mm Motor power: 0.25 kW Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via ABB frequency inverter, type ACS150-03E-01A2-4 - Belt drive via RGM geared motor - Two-piece belt body made of aluminium profile with 8 mm slot - Belt body made of aluminium profile with stainless steel sheet cladding - 1 height-adjustable base with quick adjustment, mobile on 4 fixed castors - Conveyor belt was extended by approx. 1000 mm at some point. The lateral connecting rails are somewhat unstable Overall dimensions (L x W x H): 2350 x 500 x 900 mm Weight: 63 kg

Year of construction: 2020, condition: new, We sell new and used spare parts of Nicholson machines. Offer on request. Hfodpfx Ademkd Tzowob

Year of construction: 2008, condition: good (used), functionality: fully functional, Bio-Circle Parts Washer 2 units available For active environmental protection Color: green/grey The ultimate cleaning workbench – the parts washer is in good used condition. Protective base made of stainless steel perforated plate The Bio-Circle workbench washer, a compact washing table, uses an electrically operated pump to deliver the cleaning fluid to a 3-way valve. Depending on the position of the 3-way valve, the cleaner can be directed via the hose with washing brush, including storage tray for the work area with articulated hose, or both into the table. Operated with Bio Circle L Liquid, the tank in the parts washer biologically breaks down contaminated cleaning fluids, e.g., after removing oil/grease, by means of microorganisms as per the Bio-Chem Surface Technology operating instructions. The used units, and/or brushes to be cleaned for natural biological parts cleaning, are equipped with integrated heating, pump, aeration, filter, and have been regularly maintained. Hjdpfxofhdnbs Adwjfb A magnet in the drain strainer retains steel particles. The parts washer system is fully functional and in good condition. Environmental protection through eco-friendly cleaning. Dimensions of the parts cleaning unit: Parts washer H 1120 x W 900 x D 600 mm Weight 45 kg. Inspection under power possible by prior appointment. Price / details upon request. All technical data subject to error and typographical mistakes. We sell exclusively to countries within the European Community.

Condition: good (used), CPU module, electronic modules, PLC module, plug-in card circuit board, circuit board, board, digital input module, Hfjdpfswxax Rsx Adweb -Printed circuit board: Electronic module from screw compressor Demag type 350WS -Type designations: CPU-MK1 V1.1 MK1-ADU V1.1 MK1 Digital-Input V1.1 MK1 REMIX V1 Dimensions: 270/170/H130 mm -Weight: 2.6 kg

Condition: used, Year of construction: 2003, Standard configuration Hedouqd D Eopfx Adwjfb Siemens Operator panel front: 1P 6FC5203-0AF52-0AA0Siemens MCP 19", KEY, MPI Layout Laser 1P 6FC5203-0AF52-1AA0CPU: 1P 6FC5247-0AF08-2AA0 without refurbishment

Condition: new, Year of construction: 2026, Metalclean P80 spray cleaning system in stainless steel. Single-tank spray cleaning system with rotating basket. Usable dimensions: D = 780 mm, H = 430 mm Load capacity per batch: 100 kg Tank volume: 130 liters Spray pressure: 3 bar Operating voltage: 3 x 400 V/N/PE 50 Hz Hfedpjir Apvsfx Adweb Oil skimmer

Condition: excellent (used), Year of construction: 2009, Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W Hjdpfx Adjiyqnxswefb -Dimensions: 140/130/H360 mm -Weight: 7.5 kg

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, maximum load weight: 500 kg, Cleaning system type W150 Basket diameter 1,500 mm Usable internal height 950 mm Basket load 500 kg Suitable for paint preparation and final cleaning with KS Complete stainless steel design with: - Stainless steel pump Frequency-controlled - Integration of conductivity probe in PLC - Automatic fill level replenishment - Electrical bath heating (indirect) - 2 tank system - Eco rinsing - Impulse air blow-off 3 Dimensional - Bag filter system - PLC control Siemens S7-300 with control panel - Direct drive for the wash basket - Vapor extraction - Level control - Chip/particle filter with bath cover plate - Impulse compressed air blow-off incl. sound insulation hood - PPT 100 oil separator - Pumping device/floor rinsing with tap valve Hfedpfxjga Dqlj Adwsb - 2 pieces travel/transport system

Condition: good (used), Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms -Type: 1204-406 Hfedpfjiy R Udex Adwsb -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Manufacturer: Jung, Machine transport roller: Steering mechanism type JL 12 K -Load capacity: 12 t (with chassis approx. 24 t) -Support surface: Ø 170 mm -Support height: 110 mm -Chassis: 4 transport rollers in stock can be supplied for an additional charge, see ID 35936 Hfsdpfx Adsww Uzkewsb -Transport dimensions: 970/950/H260 mm -Weight: 67 kg

Condition: good (used), Control unit, control element, interface -Manufacturer: Jungheinrich, control unit from electric forklift ERC 205 / ECE 20 / ESE 320 -Type: 2x PM2402L/2 / 2x PM 2402 L -Mat-No.: 50306778 -Voltage: 24 V -Quantity: 2x control unit available -Price: per piece Hfjdpfxjiyqn Re Adwob -Dimensions: 170/135/H70 mm -Weight: 0.8 kg/pc.

Condition: good (used), Control, control part, interface Hfsdpfx Aeiy R Uljdwob -Manufacturer: Jungheinrich, control from order picking stacker type: ECE 20 built in 2002/2003 -Type: MP 1510 interface 2 50053044-6/99 -Voltage: 24 V -Quantity: 2 pieces available -Price: per piece -Dimensions: 170/135/H70 mm -Weight: 0.7 kg/pc.

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Steering cylinder: stroke 144 mm -Piston rod: Ø 55 mm -Piston rod mounting: Ø 20 mm -Receiving holes: see photo technical drawing -Cylinder: outer Ø 105 mm -Dimensions: 510/155/H115 mm Hfodpfsgv Digox Adwsb -Weight: 18 kg

Condition: good (used), Scrubber-dryer, floor cleaning machine, mop, control unit -Manufacturer: Gansow, control unit uP mos control from scrubber-dryer 70 BF 70 -Type: B 24/35-70A -Voltage: 24 V -Number: 2x controllers available -Price: per piece Hfsdpfxjk D Nt So Adweb -Dimensions: 160/125/H30 mm -Weight: 0.4 kg

Condition: good (used), Compressor control, compressor control, control panel, control box, control unit Hsdowxaqtspfx Adwjfb -Manufacturer: Demag, compressor control from screw compressor type 350WS -Module: BT SBE 42008 TW-2294V-0 -Individual components: see photos -Dimensions: 395/105/H25 mm -Weight: 0.3 kg

Condition: good (used), Year of construction: 2003, Hydraulic pump, oil pump, drive motor, steering unit, steering orbitrol, steering unit, steering servo, steering motor, steering assembly, steering orbitrol -Manufacturer: Mannesmann Rexroth, steering unit steering orbitrol -Type: LAGS 40 N12/190-80M40-111S -Nominal pressure: 175 bar -Dimensions: 345/90/H160 mm Hjdpehmlhgofx Adwjfb -Weight: 8 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: approx. Ø 80 mm -Piston rod: Ø 50 mm -Piston rod mounting: 2x Ø 35 mm -Stroke: 150 mm -Dimensions: 780/205/H135 mm Hsdpfxjd Etd So Adwsfb -Weight: 33.6 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: approx. Ø 50 mm Hfedpfjd Etd Tox Adwob -Piston rod: Ø 35 mm -Threads on piston rod: 2x M 30 -Stroke: 100 mm -Dimensions: 445/140/H90 mm -Weight: 9.6 kg