Used Step Four for sale (5,477)

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line Iedpoxmvawefx Aabotn • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, working width: 2,050 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, power: 16.5 kW (22.43 HP), warranty duration: 12 months, STANDARD EQUIPMENT * The top, lower, and side rolls move vertically via pistons hydraulically connected to the body. * Protected against overload. * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven). * The positions of the rolls can be easily read from three digital displays. * The hydraulically opening head and the automatically rising shaft allow easy removal of the bent workpiece. * User-friendly operation with mobile control panel. * Welded steel construction body. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). * Electronic synchronization system (Ø500-550-580-620 -680). * Dual speed operation system. OPTIONAL EQUIPMENT * Automation with NC and CNC control. * Top crane (elevator) for support during large diameter bending. * Hydraulic side supports for large diameter bending. * Hydraulic sheet ejection system. * Ground and polished rolls for special applications. * Stepless speed regulation system. * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 12/16 mm Bending: 16/20 mm Top & Bottom Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4350 mm Width: 1700 mm Height: 1850 mm Itjdjxd S Npopfx Aabon Weight: 8550 kg

Condition: excellent (used), CATALOG NUMBER 7714 TECHNICAL DATA - Range of processed diameters: 40-140mm Itodpsw Ipccsfx Aabjn - Minimum input material length: 750mm - Machining allowance (on diameter): max 50mm - Cutter head drive motor: 22kW - Stepless feed speed adjustment + forward/reverse - Feed motor: 2.2kW - Pneumatic cylinders: 6 pcs In sequence: - Infeed roller - 3 toothed feed rollers - 3-knife cutting head - 3 smooth outfeed feed rollers - Outfeed roller - Extraction outlet diameter: 200mm - Brake - Dimensions (L/W/H): 3300x1450x1750mm - Weight: 2100kg ADVANTAGES – Polish made – DTR technical documentation – Used rounding machine – Perfect condition Net price: 78,900 PLN Net price: 18,560 EUR at an exchange rate of 4.25 EUR (Prices may vary depending on exchange rate fluctuations)

Year of construction: 2014, operating hours: 8,674 h, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS Iedeq H Tr Tjpfx Aabotn CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; RS 232 SERIAL PORT ; PCMCIA SERIAL PORT ; USB PORT

Condition: excellent (used), Manufacturer: REHM Type: Synergic. PRO 2 450-4 Machine condition: very good used ///// Price given for 1 pc ///// Welding current setting range 45A/16V - 450A/36.5V Weight ca.130kg SMC technology - Smart Machine Control A unique regulation concept for step-adjustable devices developed by Rehm: The welding arc length is regulated not only by measuring the welding voltage and current intensity but also by digitally determining the wire feed speed. This allows for achieving excellent welding effects and makes operation easy and safe. - SDI - Stepless Dynamic Induction Iedpjv Nrfxefx Aabstn The smoothly adjustable coil automatically takes care of the exceptional arc ignition properties and its high stability during welding. Adjustment can be done manually using the SDI knob. This allows for the regulation of the heat input, which can have a positive effect on the amount of necessary post-welding processing. - RSC – Realtime Speed Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. By using RSC, changes in the arc length are compensated faster and more effectively. - CCM – Characteristic Curie Memory A database of welding parameters integrated in the device with expert knowledge. By selecting a set of wire type and diameter and welding current voltage level, the previously set welding parameters are synergistically selected. During welding, the current parameter values are compared with the set parameters and, if necessary, immediately corrected. - RMI – Rehm Machine Interface The control panel of the device is extremely simple and guarantees the avoidance of erroneous selection. Simple selection of parameters facilitates the welder's work and allows for minimizing errors and minimizing the time of setting the device.

Condition: excellent (used), Year of construction: 2002, Immediately available from ongoing operation Precise, high-quality, stable CNC BED MILLING MACHINE MAKE: REIDEN (CH) MODEL: BF 5 Z CNC HEIDENHAIN TNC 530 (UPDATE) Travel X-axis: 4000 mm Travel Y-axis: 1000 mm Travel Z-axis: 1500 mm Automatic tool changer: 40 positions Working table T-slots (H7): 4000 x 1000 mm Milling head ASK-2 with B-axis Main motor power AC: 24 kW Tool taper: SK 50 Spindle speed, gear steps: up to 5,000 rpm Feeds x, y, z: 2–8,000 mm/min Internal coolant supply: 20 bar Machine weight approx.: 24,000 kg Equipment: - Electronic hand-wheel HEIDENHAIN - Hydraulic counterweight system - Working table surface ground - Chip conveyor - Internal coolant through spindle (IKZ) - Air blast through spindle center - 3-step gearbox - CNC main board replaced - Sliding doors on machine bed (2) The machine is well maintained and fully operational – high accuracy UNDER POWER – AVAILABLE FOR INSPECTION ON REQUEST: DISMANTLING, LOADING, AND DELIVERY POSSIBLE Subject to prior sale. Ijdpfexpvacjx Aabjtn

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Itjdpsxmvaqjfx Aaben Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, working width: 1,550 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum or stainless steel materials Ideal for bending materials into round and various diameters Bottom roll and side rolls move directly up and down hydraulically via linear movement Protected against overloading Top roll is driven by an electric motor and planetary gearbox. Bottom roll driven by cardan coupling system. Two rolls are drive rolls Roll positions can be easily read from three digital displays Hydraulically operated openable head allows easy removal of the bent workpiece Very easy to use with movable control panel Welded steel construction body SAE 1050 (CK 45) induction hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety standards and CE marked Operation manual OPTIONAL EQUIPMENT Remote assistance with NC control Overhead crane (hoist) for supporting large diameter bending Hydraulic side supports for assisting with large diameter bending Ground and polished rolls Dual-speed adjustment system Stepless speed regulation Return rotation driven by hydromotor Ejector system TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending Thickness: 12/15 mm Top & Bottom Roll Diameter: 250 mm Ijdpjxd S Aiefx Aabotn Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3500 mm Width: 1500 mm Height: 1370 mm Weight: 4650 kg

Condition: excellent (used), Catalog number 7734 Itodpexb Tadjfx Aabjn TECHNICAL DATA - Shaft width: 630 mm - Max workpiece thickness: 230 mm - 4-knife planing shaft * Top section: - Anti-kickback fingers - Serrated infeed roller (pulling) - Pressure bar - Planing shaft - Pressure bar - 2 smooth outfeed rollers (pulling) * Bottom section: - Adjustable roller in lower table - Motor approx. 7.5 kW - Stepless feed speed adjustment - Dust extraction port diameter: 145 mm - Dimensions (L/W/H): 1250x1300x1300 mm - Weight: 908 kg ADVANTAGES – Italian manufacturing – Very good condition – Used thickness planer Net price: 21,900 PLN Net price: 5,150 EUR depending on exchange rate of 4.25 EUR (Prices may change according to currency fluctuations)

Condition: ready for operation (used), - USED - BRIDGE-TYPE MILLING MACHINE WITH MOBILE TABLE AND MOBILE CROSS BEAM LONGITUDINAL TRAVEL: 9000 mm TRANSVERSAL TRAVEL: 2950 mm VERTICAL TRAVEL: 1250+2200 mm Itodpjh Stzgsfx Aabjn RAPID FEEDS L-T-V: 3 - 3 - 2 m/min TABLE SIZE: 2800 x 8000 (5000+3000) mm MAX ADMITTED LOAD: 64000 Kg SPINDLE: 20 - 600 rpm; 100 kW; 13000 Nm; ISO 60 DISTANCE BETWEEN UPRIGHTS: 3200 mm DISTANCE SPINDLE NOSE-TABLE: 2806 mm OVERALL DIMENSIONS: 21000 x 7800 x 6650 mm ACCESSORIES: GEAR BOX NOTE: No 1 90° HEAD; No 1 REDUCED 90° HEAD; No 1 VERTICAL EXTENSION; No1 TILTING HEAD; 3-STEPS GEAR BOX

Condition: ready for operation (used), Gantry Crane 16t, Portal Crane 16t, Konecranes Crane 16t, Used Machine Manufacturer: Konecranes Serial Number: 220331 Hoisting Motor: N4 50 Hz Control System: Radio control + pendant control (location: ground level) Year: 2001 Operating Temperature: -20°C to +40°C Classification: Outdoor use Weight: 20 t Fire and Explosion Hazard Classification: C (BM 35/1996) Span: 20 m Standard Lifting Height: 11.5 m Lifting Speed (2-speed): 5 m/min; 0.8 m/min Trolley Travel Speed (2-speed): 25 m/min; 6.3 m/min Itjdpfx Ajxmhrrsabjn Crane Travel Speed (stepless, frequency-controlled): 32 m/min; 1.28 m/min Wire Rope: Galvanized Diameter: 9 mm Length: 94 m Tensile Strength: 2160 N/mm² Lifting Hook: 16 t 6 RSN DIN 15401 Serial Number: 5168/01/1 Electrical Data: 400 V; 50 Hz; 23.1 kW !!The price refers to one crane!!

Year of construction: 2025, condition: used, comprising the following items: Placement unit (594), consisting of: 1 chain conveyor SEB-EURODRIVE, dimensions (W x H x D): approx. 350 x 145 x 60 cm; 1 rail conveyor device TEGEL-TECHNIK (595), carriage dimensions (W x H x D): approx. 130 x 160 x 130 cm, control system SIEMENS SIEMATIK HMI, rail length: approx. 25 m; 1 double hardening furnace PADELTTHERM KEU 1008/400-S (596), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 hardening furnace PADELTTHERM KEU 1008/400-S (597), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 autoclave ALD VACUUM Modultherm (598), year of manufacture: 2022, recorded operating hours: approx. 6,968, max. temperature: approx. 1,250°C, capacity: approx. 4,909 l / 338 l, 1 mobile autoclave unit on rail system, rail length approx. 25 m, ID: 39716; 1 pressure vessel, SABAWERK 47-001310, (599), capacity: approx. 5,000 l, max. allowable pressure: PS-1/40 bar, test pressure: approx. 58 bar, inspection date: 2023, maximum operating temperature approx. 50°C, min. operating temperature: approx. -10°C; 1 pressure vessel SABAWERK 47-001310, max. capacity: approx. 6,000 l, max. allowable pressure: PS-1/9 bar, test pressure: approx. 12.9 bar, inspection date: 2023, serial no.: 20550; 1 gas mixing unit FLUSYS (601), year of manufacture: 2022, comprising: 1 mixing battery FLUSYS type FSP-2030A_01, serial no.: M22111122A, year 2022, 1 compressed air drying unit ESD MK-HP575, year 2022, max. pressure: approx. 45 bar, max. capacity: approx. 575 m³/h; 1 compressed air compressor unit SAUER (602); 1 water treatment plant TECHNOTRANS (603); 1 pressure vessel KOMNINO KPT-10000-40/1.8 (604), year of manufacture: 2023, max. capacity: approx. 10,000 l, max. allowable pressure: approx. 57.2 bar, serial no.: 10054; 1 aluminium platform ladder, 10-steps, FARAONE 300/SN (605), max. load: approx. 150 kg, height: approx. 262 cm, net weight: approx. 35 kg, serial no.: 20230729002; 1 2-door steel cabinet (606), contents: various consumables for the multi-process hardening system. Iedsxnak Ajpfx Aabjtn

Condition: new, overall weight: 10,500 kg, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening during reverse tipping, side walls pendulum-mounted and foldable, side drop sides with spring relief, platform floor made of 4 mm fine-grained steel, 8 heavy-duty recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, stepless height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode in front, integrated storage compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy cover), contour marking according to ECE R 048 regulation, vehicle with day registration, rental price from €550. Typing errors, mistakes and changes reserved, sample images. More data at: !, More details: ! Iodpfx Aaexpwixsbstn

Condition: excellent (used), Year of construction: 1976, TOYOSK 0-R fixed spindle pitch high speed 12-spindle fine thread drilling machine Year of manufacture: 1976 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Spindle diameter: 8mm Table feed: 65mm Table surface: 200x260mm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanical, small holes / threads. Power: 0.75kW Iodpfjwifguex Aabjtn Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: excellent (used), Year of construction: 1984, TOYOSK 01C550T Fixed Spindle Pitch 48 Spindle Tapping Machine Year of Manufacture: 1984 Iodpfx Ajwifdgsabstn Speed ​​(3 stages): 450 / 700 / 1100 rpm Speed ​​Change: Mechanical (stepped stages) Spindles: 48pcs Tool Holder Type: Spring/Clamp Chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Itjdpfxswifd He Aabon Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: excellent (used), Year of construction: 1982, TOYOSK 01B-T fixed spindle 12-spindle drilling machine Year of manufacture: 1982 Speed ​​(3 stages): 440 / 700 / 990 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs Tool holder type: spring/clamp chucks Itodpfxowh S E Us Aabjn Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: ready for operation (used), Year of construction: 1961, Manufacturer: WMW NILES lathe DLZ 630 Condition: used Turning diameter over bed: 630 mm Feed: quer: 0,018-1,25 mm/U Hollow: 70 mm Centre height: 290 mm Spindle speed: 22,5 – 1120 / 18 step U/min Turning length: 2000 mm Total power requirement: 15,0 kW Turning diameter over bed: 630 mm Weight of the machine ca.: 4,2 t Transport dimensions lxwxh: 4,5×1,35×1,5 m Isdpfjdwfdfsx Aabstn Turning diameter over slide: 340 mm If you need more information. We are here to help! Please contact us via the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 480 mm, total length: 6,000 mm, construction width: 405 mm, construction height: 700 mm, axle spacing: 100 mm, EasySystem driven roller track, in mint condition, several pieces for sale 480x6000 Driven roller track with aluminum frame, in mint condition, several pieces for sale from stock. The track system can be classified. Manufacturer: EasySystem Total track width: 480mm Roller width: 405mm Roller diameter: 50mm Wheelbase: 100mm Total length of track: 6000mm Track height: 700mm (adjustable legs - max. 8cm +/-) Drive: electric motor with NORD gearbox Itedpfsukgduox Aabsn Power: 0.37kW, 1.89A, 230/400V Track speed: approx. 30m/min A NORD frequency converter can be purchased as an option, with which the speed can be adjusted steplessly.

Year of construction: 1999, condition: excellent (used), Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) Itedpfsium Niox Aaben - electric foot switch Weight 300kg

Year of construction: 1991, condition: excellent (used), Manufacturer: Beck Max. throughput: 650x300mm Max. temperature: 350 °C Stepless speed adjustment, forward/reverse. Ijdpfxemv E Ics Aabetn 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Condition: good (used), functionality: fully functional, power: 11.77 kW (16.00 HP), motor manufacturer: Mitsubishi, gearing type: mechanical, fuel type: diesel, overall weight: 740 kg, The Japanese Kumiai MT1601D type 4x4 drive, 16 horsepower, 3-cylinder small tractor shown in the picture is for sale in excellent condition, with a completely renovated engine. Manufacturer: Mitsubishi Kumiai 1601D Operating hours: 886 3 cylinder Power: 16 HP Total displacement 900 ccm 4 wheel drive Yes Forward gear 6 (3x2) gears Rear gearbox 2 (1x2) steps Reversible drive no Differential lock Independent side brakes Maximum travel speed 12.2 km/h Maximum reverse speed 6.2 km/h Length 220 cm width 98 cm His height is 119 cm Wheelbase 129 cm Its weight is 740 kg First gauge 66 cm Back gauge 50 cm Itsdpfju A Ilrex Aabjn First tire size 5.00-12 Rear tire size 8.3-20 Adjustable rear track no Hydraulic positioning Yes Rear suspension arm 2 points Number of Cardan Gears 3 gears Rotary tiller (120 cm)

Year of construction: 1988, condition: excellent (used), Manufacturer: Beck Max. throughput: 660x180mm Max. temperature: ca 300 °C Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH) Itedemv Hy Hopfx Aabjn

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps Ijdpfx Aeikq Tysabjtn - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible. Isdpfx Aajd Aqqzjbstn